MCP3901A0-I/ML - Dual 24-Bit AFE | Microchip Technology
部品番号: MCP3901A0-I/ML ✓ 生産中MCP3901A0-I/ML 概要
An analog front end, or AFE, is the signal-conditioning and conversion interface between a physical analog input and a digital system. In the signal-chain hierarchy, an AFE combines amplifier, converter, reference, and interface functions ahead of a microcontroller or digital controller. The MCP3901 family is designed for dual-channel metering systems in which synchronized sampling, programmable gain, and compact integration simplify energy-meter and sensor-interface designs.
Key features include two independent 24-bit delta-sigma conversion channels, internal programmable-gain amplifiers, an internal voltage reference, and up to 91 dB SINAD according to the Microchip product page. A high-speed SPI-compatible interface operates at up to 20 MHz. The industrial-grade ordering code also identifies a surface-mount 20-terminal square QFN package, while the -I/ML package suffix corresponds to the 4 x 4 mm QFN format.
The synchronous delta-sigma architecture samples both analog channels in a coordinated manner, which is valuable when measuring two related quantities such as voltage and current in a metering application. Internal gain control reduces the need for external analog gain stages, while the internal reference reduces the number of precision components around the converter. The phase-delay compensation block supports systems where coherent measurements are required.
Typical uses include single- and three-phase energy-metering circuits, industrial power monitoring, current-and-voltage sensing, and low-bandwidth sensor acquisition. The two-channel structure allows one AFE to process a voltage input and a current input simultaneously, while the SPI interface allows a host microcontroller to configure conversion parameters and retrieve digital results.
When laying out the circuit, place input and reference-related components close to their associated pins, keep analog and digital return currents separated, and use the manufacturer pin-description table to assign tracks. The available power range and exposed thermal-pad requirements should be reviewed against the worst-case analog input, gain, clock, and ambient conditions rather than inferred from the nominal converter specifications alone.
This page organizes the manufacturer specifications, package details, application guidance, design considerations, and verified drop-in alternatives for engineers comparing the MCP3901A0-I/ML with other dual-channel metering AFEs. It also distinguishes pin-compatible temperature-grade and resolution-mode variants so replacement decisions are based on measurable device differences.
ドロップイン代替品: MCP3901A0-I/ML — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。
MCP3901A0-E/ML
✅ ドロップイン価格はお問い合わせください
データシートを見る →MCP3901A0T-I/ML
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MCP3901A0T-E/ML
✅ ドロップイン📋 参考代替品(カタログ未掲載)
MCP3901A0-I/ML 最大定格&電気的特性
| Number of ADC Channels | 2 channels |
| ADC Resolution | 16-bit or 24-bit |
| ADC Architecture | Synchronous-sampling delta-sigma ADC |
| Programmable Gain Amplifiers | 2 internal PGAs |
| Internal Voltage Reference | 1 internal voltage reference |
| Maximum SINAD | 91 dB |
| Phase-Delay Compensation | Internal phase-delay compensation block |
| Digital Interface | SPI-compatible serial interface |
| Maximum SPI Clock Frequency | 20 MHz |
| Minimum Analog Supply Voltage | 2.7 V or 4.5 V, depending on configuration |
| Maximum Analog Supply Voltage | 5.5 V |
| Temperature Grade | Industrial |
| Package Type | 20-pin QFN (HVQCCN), 4 x 4 mm |
| Number of Terminals | 20 terminals |
| 実装タイプ | Surface mount |
| Package Shape | Square |
MCP3901A0-I/ML square ピン配置ガイド
MCP3901A0-I/ML (square パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。
詳細なピン配置データはありません: MCP3901A0-I/ML.
詳細は データシート をご参照ください。
主な用途
MCP3901A0-I/ML の用途: 6 件s: Single-Phase Energy Metering, Three-Phase Energy Monitoring, Industrial Power Monitoring, Current and Voltage Sensor Interface, Low-Bandwidth Sensor Acquisition, Smart Meter and Utility Endpoint.
Single-Phase Energy Metering
The MCP3901A0-I/ML fits single-phase energy meters because it combines two synchronous-sampling delta-sigma ADC channels, internal programmable-gain amplifiers, and an internal voltage reference in one compact 20-pin QFN. The voltage and current inputs can be conditioned directly into the two conversion channels without separate precision gain stages. According to the Microchip product page, the family supports 16-bit or 24-bit conversion and up to 91 dB SINAD, giving a metering controller a high-accuracy, synchronized acquisition path. The SPI-compatible interface supports digital result retrieval and configuration, while phase-delay compensation supports systems requiring coherent current and voltage measurements. Board-level validation should include gain calibration, offset correction, line-frequency rejection, and startup settling before energy totals are accepted by the utility metering firmware.
おすすめ
Three-Phase Energy Monitoring
The two-channel MCP3901A0-I/ML can support multi-phase monitoring architectures that repeatedly measure a phase voltage and its associated current through synchronized conversion. Its two internal PGAs help bring sensor outputs into the converter range, while the internal voltage reference supports consistent digital results without a separate reference IC. The 20-pin QFN package reduces board area compared with discrete amplifier and converter arrangements. Microchip identifies the MCP3901 family as supporting up to 91 dB SINAD, which is important when preserving low-level information from shunt or sensor signals. For three-phase products, designers should evaluate how the two channels are multiplexed across phase pairs and validate phase-to-phase timing, calibration, and the SPI update schedule in the final meter firmware.
おすすめ
Industrial Power Monitoring
The MCP3901A0-I/ML is suitable for industrial power-monitoring modules that need accurate acquisition of voltage and current at a centralized monitoring node. The synchronized delta-sigma channels support repeatable dual-signal acquisition, and the internal programmable-gain amplifiers reduce analog front-end complexity when the selected sensors already deliver suitably scaled signals. A maximum SPI clock of 20 MHz allows the host controller to retrieve conversion data efficiently, while the 2.7 V or 4.5 V supply options support integration into mixed-voltage designs when configured as specified. The 4 x 4 mm QFN is useful where panel and DIN-rail module space is constrained. Industrial qualification should also account for ambient temperature, noise immunity, isolated power domains, and the final enclosure rather than relying on the component temperature-grade designation alone.
おすすめ
Current and Voltage Sensor Interface
When a current sensor and voltage sensor must be measured together, the MCP3901A0-I/ML provides two matched conversion channels behind individual programmable-gain amplifiers. This arrangement is useful for power, power-factor, energy, and system-health calculations where simultaneous acquisition reduces timing uncertainty. The delta-sigma ADCs can operate at 16-bit or 24-bit resolution, allowing the system to trade output rate and processing requirements for numerical resolution. The internal reference and compact QFN package minimize the number of external precision components. Designers should select gain and digital filter settings that preserve headroom for maximum sensor excursions, and they should include calibration for offset, gain, and reference drift to maintain useful accuracy across the complete input range.
おすすめ
Low-Bandwidth Sensor Acquisition
The MCP3901A0-I/ML can serve as the acquisition front end in low-bandwidth sensing systems that monitor slowly changing analog quantities. Two independent PGAs condition each channel, and the selectable 16-bit or 24-bit delta-sigma conversion provides flexibility between resolution and conversion throughput. The internal reference removes the need for an external reference device in basic measurement paths, while the phase-delay compensation block can assist coherent acquisition when both channels represent related variables. Because the MCP3901 is optimized for metering rather than high-frequency waveform capture, the application should avoid expecting wide-band oscilloscope performance. The signal bandwidth, digital filter response, input impedance, and common-mode range must be checked against the sensor source before setting the sampling and gain configuration.
おすすめ
Smart Meter and Utility Endpoint
The MCP3901A0-I/ML is appropriate for smart-meter endpoints where measurement accuracy, compactness, and host-controller integration are primary requirements. Two 24-bit-capable delta-sigma channels can acquire the voltage and current information used for energy accumulation, while internal gain stages and reference circuitry reduce analog component count. The SPI-compatible interface provides a direct path to a host microcontroller, and the 20-pin QFN supports compact meter-board layouts. Microchip states that the family can achieve up to 91 dB SINAD, providing a useful benchmark for the metering signal path. A production design still needs regional metering-certification testing, calibration traceability, tamper-detection provisions, and communication-security architecture; the converter specification alone does not establish regulatory compliance.
おすすめ
おすすめ製品の概要
エンジニアリング参考データ: MCP3901A0-I/ML — 比較、設計ガイダンス、コンプライアンス情報。
選定ガイド
代替品との比較
| パラメータ | この製品 | MCP3901A0-E/ML | MCP3901A0T-I/ML | MCP3901A0T-E/ML |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin QFN (HVQCCN), 4 x 4 mm | 20-pin QFN (HVQCCN), 4 x 4 mm | 20-pin QFN (HVQCCN), 4 x 4 mm | 20-pin QFN (HVQCCN), 4 x 4 mm |
| ADC Channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Resolution | 16-bit or 24-bit | 16-bit or 24-bit | 16-bit | 16-bit |
| ADC Architecture | Synchronous-sampling delta-sigma ADC | Synchronous-sampling delta-sigma ADC | Synchronous-sampling delta-sigma ADC | Synchronous-sampling delta-sigma ADC |
| Programmable Gain Amplifiers | 2 internal PGAs | 2 internal PGAs | 2 internal PGAs | 2 internal PGAs |
| Internal Voltage Reference | Yes | Yes | Yes | Yes |
| Maximum Supply Voltage | 5.5 V | 5.5 V | 5.5 V | 5.5 V |
| Temperature-Grade Suffix | I, industrial | E temperature grade | I, industrial | E temperature grade |
主な差別化要因
- Supports selectable conversion resolution (vs MCP3901A0T-I/ML)
- Combines two synchronized measurement channels and both gain stages (vs MCP3901A0-E/ML)
- Retains a compact common metering-AFE footprint (vs MCP3901A0T-E/ML)
設計ノート
Use the manufacturer package drawing to implement the complete 20-terminal 4 x 4 mm QFN footprint, including the exposed pad, thermal vias, and paste pattern. Place input-filter components and decoupling capacitors close to the associated pins, minimize loop area between supply connections and ground, and avoid routing fast SPI traces beneath sensitive analog inputs. Separate analog and digital return paths until they join at the selected grounding point to reduce converter and reference coupling.
Configure both input channels for the same gain and timing assumptions when calculating power, power factor, or other values derived from voltage and current measurements. Verify the input source impedance against the selected PGA mode and anti-alias requirements, and include sensor settling time in the acquisition sequence. Differential and common-mode input limits must be checked with the actual divider, shunt amplifier, and surge-protection network rather than only with the nominal sensor output.
Do not treat the I, E, or T ordering suffixes as interchangeable labels without reviewing the device configuration. The A0T variants are associated with 16-bit operation, while the standard MCP3901 family supports 16-bit or 24-bit resolution. A physical pin-compatible substitution can still require different registers, conversion timing, output coding, or calibration treatment. Run a firmware, timing, and accuracy regression against the exact alternate MPN before approving it as a drop-in replacement.
Estimate the QFN junction temperature from total device dissipation, package thermal resistance, board copper, and ambient temperature under the worst operating condition. The AFE's supply current and digital-interface activity affect thermal load, while the exposed pad is the principal heat-transfer path. Use thermal vias and sufficient copper area, and confirm the manufacturer's maximum operating temperature for the exact suffix rather than assuming all MCP3901 variants have identical limits.
コンプライアンス情報
No explicit RoHS, REACH, AEC-Q100, lead-free, halogen-free, or conflict-minerals declaration was identified for the exact ordering code. Use the manufacturer product documentation and declarations for compliance assessment.