Microchip Technology

MCP606T-I/SN - 155kHz Micropower Op Amp | Microchip

MPN: MCP606T-I/SN ✓ সক্রিয়
2.5 V to 6.0 V Vdss 18.7 µA Id 8-pin SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MCP606T-I/SN সারাংশ

The Microchip Technology MCP606T-I/SN is a single-circuit, rail-to-rail-output operational amplifier with a 155 kHz gain-bandwidth product, typical operating current of 18.7 µA, and maximum input offset voltage of 250 µV. The device operates from a 2.5 V to 6.0 V single supply and is packaged in an 8-pin SOIC package for industrial temperature operation from -40 °C to +85 °C.

An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its two inputs while providing high open-loop gain. The MCP606 belongs to the micropower amplifier segment of the broader linear IC hierarchy, combining low supply consumption with rail-to-rail output capability. This combination makes it suitable for portable instrumentation, low-power sensors, signal conditioning, and battery-powered systems where the output must operate close to the supply rails.

Key electrical characteristics include a 155 kHz gain-bandwidth product, 38 nV/√Hz input-noise density at 1 kHz, 80 V/ms slew rate, and 91 dB open-loop gain. The input offset voltage is specified below 250 µV, while input bias current is listed at 1 pA. Temperature drift is 1.8 µV/°C, supporting stable precision measurements across the industrial temperature range. CMOS input stages provide the low bias current needed to avoid disturbing high-impedance sensor signals.

The MCP606 uses Microchip's advanced CMOS process and is unity-gain stable, allowing operation as a direct buffer without an external compensation network. Rail-to-rail output swing increases usable signal range in low-voltage systems, although input common-mode limits, output-current capability, and stability must be checked against the circuit requirements. Built-in compensation simplifies small-signal layouts, but sensitive analog nodes still require short traces and careful grounding.

Typical uses include portable sensor interfaces, low-power data acquisition, active filtering, microphone preamplification, battery-powered monitors, and general-purpose signal conditioning. Its 18.7 µA typical operating current is particularly useful when every microampere affects battery life. The 155 kHz bandwidth also supports applications requiring modest closed-loop bandwidth rather than high-speed waveform processing.

For layout, place input and output components close to the corresponding pins, maintain a continuous ground reference, and keep high-current return paths away from sensitive input traces. Decoupling capacitors should connect directly between the supply pin and ground. Check the manufacturer's recommended capacitor values, maximum input voltage, common-mode range, and output-load limits before finalizing the circuit.

This page combines the manufacturer specifications, package details, drop-in alternatives, application guidance, and design notes needed to evaluate MCP606T-I/SN for a new low-power analog design. It also distinguishes package-compatible options from variants that require a different footprint, helping engineers select a replacement without overlooking PCB or qualification constraints.

এর জন্য ড্রপ-ইন বিকল্প MCP606T-I/SN — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MCP606T-I/SN (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Typical Operating Current, Amplifier Type, Input Bias Current, Slew Rate.

Microchip Technology
Package: 8-pin PDIP
Typical Operating Current: 18.7 uA
Input Bias Current: 80 pA maximum at +85 C
Microchip Technology
Package: 8-SOIC, 0.154 in, 3.90 mm width
Amplifier Type: General Purpose
Slew Rate: 0.08 V/µs

MCP606T-I/OTVAO

✅ ড্রপ-ইন
📦 SOIC-8
Identical primary performance profiles; automotive qualification changes the ordering option, while the 155 kHz bandwidth and 250 µV maximum offset remain unchanged

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MCP606-I/SN

✅ ড্রপ-ইন
Microchip Technology
📦 SOIC-8
General Purpose · 1 · 155 kHz · 18.7 µA · 25 µA · 250 µV · 80 pA · 0.08 V/µs

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MCP606T-I/OT

✅ ড্রপ-ইন
Microchip Technology
📦 SOIC-8
Single operational amplifier · 1 circuit · 2.5 V to 6.0 V · 155 kHz · 18.7 µA · 25 µA · 250 µV · 80 pA at +85 °C

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MCP606T-I/SN সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Amplifier Type Single operational amplifier
Gain-Bandwidth Product 155 kHz
Typical Operating Current 18.7 µA
Supply Voltage Range 2.5 V to 6.0 V
Input Offset Voltage Less than 250 µV maximum
Input Offset Voltage Drift 1.8 µV/°C
Input Bias Current 1 pA
Input Noise Density 38 nV/√Hz at 1 kHz
Slew Rate 80 V/ms
Open-Loop Gain 91 dB
আউটপুট টাইপ Rail-to-rail output
Compensation Built-in, unity-gain stable
অপারেটিং তাপমাত্রার পরিসর -40 °C to +85 °C
প্যাকেজ 8-pin SOIC
মাউন্টিং টাইপ Surface mount
RoHS স্ট্যাটাস Compliant

MCP606T-I/SN পিন কনফিগারেশন

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
পিন 1 NC — Not connected
পিন 2 −IN — Inverting input
পিন 3 +IN — Non-inverting input
পিন 4 V− — Negative supply or ground connection
পিন 5 NC — Not connected
পিন 6 OUT — Amplifier output
পিন 7 V+ — Positive supply connection
পিন 8 NC — Not connected

সাধারণ ব্যবহার

MCP606T-I/SN এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Battery-Powered Sensor Interfaces, Portable Medical Monitoring, Industrial IoT Signal Conditioning, Portable Audio Preamplification, Low-Power Data Acquisition, Battery-Powered Voltage Monitoring.

🔋

Battery-Powered Sensor Interfaces

The MCP606T-I/SN fits low-power sensor front ends because it operates from 2.5 V to 6.0 V while drawing only 18.7 µA of typical operating current. Its 1 pA listed input bias current minimizes disturbance to high-impedance sensor sources, and the 250 µV maximum input offset supports accurate measurement of small signals. Place the amplifier close to the sensor and ADC input, use the device as a voltage follower where appropriate, and include local supply decoupling to preserve low-noise behavior.

💊

Portable Medical Monitoring

The MCP606T-I/SN is useful in portable monitoring equipment where each microampere of amplifier current affects battery life. Its low operating current, 155 kHz gain-bandwidth product, and 38 nV/√Hz input-noise density support low-level physiological signal conditioning. The rail-to-rail output allows useful signal span at low supply voltages, although circuit design must account for the device's stated input common-mode limits and provide isolation appropriate to the intended medical application.

🧩

Industrial IoT Signal Conditioning

The MCP606T-I/SN is appropriate for industrial IoT modules that condition low-frequency sensor or switch-state signals without requiring a high-speed amplifier. Its -40 °C to +85 °C rating covers industrial environments, while the 155 kHz bandwidth supports moderate closed-loop gains and active filtering. Use short traces from the transducer, maintain a low-impedance ground return, and avoid routing switching-node or relay-control currents beneath the input network to reduce coupled noise.

🎧

Portable Audio Preamplification

The MCP606T-I/SN can provide low-level audio preamplification in portable microphone or line-level circuits when modest bandwidth is sufficient. Its 38 nV/√Hz input-noise density, 1 pA listed input bias current, and 80 V/ms slew rate support low-noise signal handling, while the 155 kHz gain-bandwidth product favors voice-band rather than high-fidelity wideband applications. Choose passive or active gain values that avoid clipping near the output swing limits.

📟

Low-Power Data Acquisition

The MCP606T-I/SN is suitable for buffering multiplexed or low-rate data-acquisition channels where power consumption is more important than megahertz bandwidth. A 155 kHz amplifier can provide channel conditioning and active filtering, while 18.7 µA typical operating current limits the amplifier contribution to total system power. Keep the input network close to the ADC driver, use a stable reference and ground arrangement, and verify settling requirements for the selected gain and sampling rate.

⚡

Battery-Powered Voltage Monitoring

The MCP606T-I/SN works well in battery voltage monitors because its 2.5 V to 6.0 V supply range and low 18.7 µA operating current suit compact energy-harvesting and portable systems. Its less-than-250 µV maximum offset can reduce measurement error when the amplifier is used in a non-inverting gain stage, while unity-gain stability allows direct voltage buffering. Account for the amplifier's own input and output limits when monitoring rails near the upper supply boundary.

What is the operating voltage of MCP606T-I/SN?
The MCP606T-I/SN operates from a single 2.5 V to 6.0 V supply. According to the Microchip MCP606 datasheet, this range supports low-voltage battery systems and compact sensor nodes while retaining rail-to-rail output swing. The supply pins must remain within the manufacturer ratings, and input and output conditions should be evaluated across the full 2.5 V to 6.0 V operating range rather than only at 5 V.
What are the key specifications of MCP606T-I/SN that engineers should know?
The MCP606T-I/SN combines a 155 kHz gain-bandwidth product with 18.7 µA typical operating current, less than 250 µV input offset voltage, and rail-to-rail output operation. According to the Microchip MCP606 datasheet, it also provides 38 nV/√Hz input-noise density at 1 kHz, 80 V/ms slew rate, and 91 dB open-loop gain. The device is unity-gain stable and comes in an 8-pin SOIC package rated for -40 °C to +85 °C operation.
Where can I buy MCP606T-I/SN online?
Use the Request a Quote form on this page to request MCP606T-I/SN availability, order quantity, and a current quotation. The form is the appropriate route for obtaining a supply commitment for this exact 8-pin SOIC ordering code. Engineers should specify the full MPN MCP606T-I/SN when requesting the quote so that an 8-pin SOIC package is not confused with the TSSOP version or another member of the MCP606 family.
What is the price of MCP606T-I/SN?
Current pricing for MCP606T-I/SN is handled through the Request a Quote form on this page. Submit the required quantity and target delivery information to obtain an up-to-date quotation for the exact MPN. Because the SOIC suffix identifies the package ordering option, include MCP606T-I/SN in full on the request to avoid pricing or shipment assumptions for a different footprint.
What is the lead time for MCP606T-I/SN?
The current lead time for MCP606T-I/SN should be confirmed through the Request a Quote form on this page. The Microchip product page identifies MCP606 as an active family, but a confirmed date depends on the ordered quantity, package code, manufacturing allocation, and destination. Providing the required quantity and delivery schedule with the quote request allows procurement to return an allocation-backed commitment for this exact part.
Is MCP606T-I/SN in stock?
Use the Request a Quote form on this page to check current MCP606T-I/SN stock and receive an order confirmation. Quote requests should identify the exact MPN, required quantity, and shipment destination. The manufacturer lists the MCP606 family as active, but production availability for a particular SOIC package and order quantity should be confirmed separately before treating the component as immediately schedulable.
MCP606T-I/SN vs MCP606-I/SN - which is better for industrial designs?
MCP606T-I/SN is the appropriate ordering code when the 8-pin SOIC package and industrial -40 °C to +85 °C temperature range are required. The comparison information for MCP606-I/SN describes the same MCP606-family characteristics, including a 250 µV maximum offset and rail-to-rail output, while the ordering codes identify different package or qualification options. Confirm the exact suffix mapping in the Microchip ordering information before approving a cross-reference.
What is the difference between MCP606T-I/SN and MCP606T-I/OTVAO?
MCP606T-I/SN and MCP606T-I/OTVAO use the same MCP606 amplifier family and are described as having identical primary performance profiles, including the 250 µV maximum offset and 155 kHz bandwidth class. MCP606T-I/OTVAO is associated with the automotive-qualified ordering option, while MCP606T-I/SN is the 8-pin SOIC ordering code. Select the automotive option only when its qualification and documentation satisfy the end product's requirements.
When should I choose MCP606T-I/SN over MCP606T-I/OTVAO?
Choose MCP606T-I/SN for general industrial or commercial equipment that requires the standard MCP606 performance in an 8-pin SOIC package and does not require the automotive-qualified suffix. Choose MCP606T-I/OTVAO when the automotive qualification is mandatory. Both options are based on the MCP606 family and have closely matched core performance, so the decision should follow the product qualification requirement rather than expected bandwidth differences.
Is MCP606T-I/SN suitable for battery-powered sensor interfaces?
The MCP606T-I/SN is well suited to battery-powered sensor interfaces because its typical operating current is only 18.7 µA and it operates from 2.5 V to 6.0 V. Its 1 pA listed input bias current helps preserve the signal from high-impedance sensors, while the 155 kHz gain-bandwidth product supports amplification and filtering of slowly varying or low-frequency sensor outputs. Total system current should also include sensor and support-circuit consumption.
What is the best drop-in replacement for MCP606T-I/SN?
MCP606T-I/OTVAO is the closest documented drop-in option because it uses the MCP606 family performance in the same 8-pin SOIC footprint and is reported to have identical primary technical parameters. MCP606-I/SN and MCP606T-I/OT are also package-compatible family options, but their qualification or ordering details must be checked. Confirm pinout, temperature rating, automotive qualification, and supply limits before substitution.
What Microchip amplifier can replace MCP606T-I/SN?
MCP606T-I/OTVAO can serve as a Microchip drop-in candidate for MCP606T-I/SN when an 8-pin SOIC footprint and the same amplifier family are required. Cross-reference information reports identical primary performance profiles for these devices. The automotive-qualified suffix should be selected when its qualification is needed; otherwise the standard target MPN remains appropriate. Verify the exact ordering code and production status with Microchip before releasing the BOM.
Where to download the MCP606T-I/SN datasheet PDF?
Download the MCP606 family documentation from the official Microchip product page linked as the datasheet URL on this page. The document describes the 2.5 V to 6.0 V micropower CMOS operational amplifier, including its 155 kHz gain-bandwidth product, 18.7 µA typical operating current, 250 µV maximum offset, electrical characteristics, and package information. Use the manufacturer's ordering and pin-description tables when assigning PCB tracks or approving a substitute.
Where can I find the MCP606T-I/SN pinout?
The MCP606T-I/SN pinout is found in the pin-description table of the Microchip MCP606 datasheet and corresponds to the 8-pin SOIC footprint. Pin 1 is located by the package orientation marker, and numbering proceeds counter-clockwise around the device. Assign tracks using the numbered pin-description table rather than relying only on the package drawing, because NC pins must remain unconnected and supply pins must be connected correctly.
Does MCP606T-I/SN need an external compensation capacitor?
No external compensation capacitor is required for standard unity-gain operation because the MCP606 is unity-gain stable. According to the Microchip MCP606 datasheet, the amplifier includes built-in compensation and is intended for direct buffering as well as conventional inverting and non-inverting gain stages. Feedback-component selection, output loading, and stability should still be evaluated for the intended gain and signal frequency.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MCP606T-I/SN — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose MCP606T-I/SN for low-power single-supply analog designs that require the 8-pin SOIC footprint, a 155 kHz gain-bandwidth product, rail-to-rail output, and an industrial -40 °C to +85 °C temperature range. Choose MCP606T-I/OTVAO when the automotive qualification of that ordering option is required; the core performance is reported as identical. Choose MCP606-I/SN when its specific ordering and qualification details match the product requirements. Choose MCP606T-I/OT only after confirming that its ordering code, documentation, and lifecycle conditions fit the design. For all options, verify the pinout, input common-mode range, output swing, compensation behavior, and load stability because the same package alone does not establish complete interchangeability.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MCP606T-I/OTVAO MCP606-I/SN MCP606T-I/OT
Package SOIC-8 SOIC-8 SOIC-8 SOIC-8
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Amplifier Type Single operational amplifier Single operational amplifier Single operational amplifier Single operational amplifier
Gain-Bandwidth Product 155 kHz 155 kHz 155 kHz family rating 155 kHz family rating
Supply Voltage Range 2.5 V to 6.0 V 2.5 V to 6.0 V 2.5 V to 6.0 V family rating 2.5 V to 6.0 V family rating
Maximum Input Offset Voltage 250 µV 250 µV 250 µV 250 µV family rating
Typical Operating Current 18.7 µA 18.7 µA 18.7 µA family rating 18.7 µA family rating
Output Type Rail-to-rail output Rail-to-rail output Rail-to-rail output Rail-to-rail output family rating

মূল পার্থক্যসমূহ

  • Low operating current supports longer battery life (বনামMCP606-I/SN)
  • Automotive-qualified family option is available in the same SOIC-8 footprint (বনামMCP606T-I/OTVAO)
  • Rail-to-rail output improves usable span in low-voltage systems (বনামMCP606T-I/OT)

ডিজাইন নোট

Place the decoupling capacitor directly between pin 7, V+, and pin 4, V−, with a short ground path. Connect input components close to pins 2 and 3, and route the feedback components from pin 6 without passing through the input region. For high-impedance sources, use a guarded ground or driven shield if leakage and surface contamination could disturb the signal. Keep switching regulators, relays, and high-current return paths physically separated from the analog amplifier.

The MCP606 has a 155 kHz gain-bandwidth product, so its closed-loop bandwidth depends on the selected noise gain. At higher gain, the usable signal range becomes more limited, and added phase delay can cause ringing or instability. Confirm stability with the intended capacitor values, source impedance, output load, and PCB parasitics. The built-in compensation supports unity-gain use, but it does not remove the need to verify each feedback network and load condition.

Estimated: the typical operating current is 18.7 µA, so the amplifier's contribution at 3.3 V is approximately 61.7 µW before considering output-current demand, bias effects, and supply rejection. This calculation is an operating-point estimate rather than a maximum-power rating. The design must also include each support component's consumption and verify that startup transients, output loading, and battery leakage remain within the system power budget.

Do not assume that a rail-to-rail output guarantees rail-to-rail input operation. Check the manufacturer input common-mode limits against the signal range, especially when operating near 2.5 V or 6.0 V. Likewise, verify maximum output swing under the intended load because light-load and capacitive-load behavior can differ. Use the manufacturer pin-description table to keep pins 1, 5, and 8 unconnected and connect the single-supply ground return to pin 4.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The component listing identifies the MCP606T-I/SN as RoHS compliant. No separate REACH, halogen-free, conflict-minerals, or standard-product lead-free statement was identified. Automotive qualification is associated with the MCP606T-I/OTVAO ordering option rather than the target MPN.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MCP606T-I/SN datasheet MCP606T-I/SN pinout MCP606T-I/SN datasheet pdf MCP606T-I/SN equivalent MCP606T-I/SN replacement MCP606T-I/SN cross reference MCP606T-I/SN vs MCP606T-I/OTVAO MCP606T-I/SN price MCP606T-I/SN stock Microchip MCP606T-I/SN MCP606 SOIC-8 pinout MCP606 micropower sensor amplifier

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology MCP606T-I/SN MCP606T-I/OTVAO MCP606-I/SN MCP606T-I/OT MCP606 Operational amplifier Op amp Micropower amplifier Single-supply amplifier Rail-to-rail output Unity-gain stable CMOS Gain-bandwidth product Input offset voltage Input bias current Input noise density Slew rate Open-loop gain SOIC-8 Surface-mount package RoHS Battery-powered sensor interface Portable medical monitoring Industrial IoT signal conditioning
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন