MKL25Z64VFM4 - 48MHz Cortex-M0+ 64KB Flash MCU | NXP
MPN: MKL25Z64VFM4 ✓ সক্রিয়MKL25Z64VFM4 সারাংশ
A microcontroller is an integrated circuit that executes embedded software, reads sensor inputs, controls actuators, and manages communication interfaces. The MKL25Z64VFM4 belongs to the Kinetis KL2 ultra-low-power MCU family, placing it within the hierarchy of embedded microcontroller, ARM Cortex processor, and low-power embedded-system device.
Principal features include a 48 MHz ARM Cortex-M0+ core, 64 KB of flash organized as 64K by 8 bits, and 8 KB of SRAM. The part also includes a full-speed USB controller, analog and digital peripherals, and support for 1.8 V, 2.5 V, and 3.3 V operation. Its 32-pin HVQFN package supports dense PCB layouts without relying on a large leaded package.
The Kinetis KL2 architecture is designed for embedded applications where processing capability, USB connectivity, and low-power operation must coexist in a compact footprint. The 64 KB flash capacity provides room for bootloader code, application firmware, configuration data, and USB device functions, while the 8 KB SRAM allows real-time tasks and peripheral buffering without external memory.
Typical uses include USB-connected sensors, compact data loggers, industrial interface modules, portable measurement equipment, and low-power embedded controllers. The full-speed USB interface can simplify connection to a host system, while the Cortex-M0+ core provides a common architecture for firmware development and peripheral control.
PCB design should account for the exposed pad beneath the HVQFN package, provide adequate thermal and electrical grounding, and place decoupling capacitors close to the supply pins. USB routing requires careful control of trace geometry and return paths, and firmware should use the manufacturer's clock, power-management, and USB initialization procedures.
This product page combines the core Kinetis KL25 specifications, package information, design guidance, and qualified drop-in alternatives to support component selection, firmware planning, PCB layout, and replacement decisions without requiring engineers to reconstruct the design context from separate documents.
এর জন্য ড্রপ-ইন বিকল্প MKL25Z64VFM4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible MKL25Z64VFM4 (একই form factor এবং footprint) — পার্থক্য রয়েছে Flash Memory, Package, Product Family, USB Controller.
MKL26Z64VFM4
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →MKL25Z128VFM4
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MKL25Z64VCM4
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MKL25Z32VFM4
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MKL25Z16VFM4
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
MKL25Z64VFM4 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 32-bit ARM Cortex-M0+ microcontroller |
| Product Family | Kinetis KL25 / Kinetis KL2 |
| Maximum Core Frequency | 48 MHz |
| CPU Core | ARM Cortex-M0+ |
| Architecture | 32-bit RISC |
| Flash Memory | 64 KB (64K x 8 bits) |
| SRAM | 8 KB |
| USB Controller | Full-speed USB 2.0 |
| Supply Voltage Options | 1.8 V / 2.5 V / 3.3 V |
| প্যাকেজ | 32-HVQFN (5 mm x 5 mm) |
| পিন সংখ্যা | 32 pins |
| মাউন্টিং টাইপ | Surface mount |
| Core Count | 1 core |
| Peripheral Category | Analog and digital peripherals |
| Power Class | Ultra-low-power MCU |
| Datasheet Length | 59 pages |
| Tray Packaging | Tray |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
MKL25Z64VFM4 32-hvqfn (5 mm x 5 mm) পিন কনফিগারেশন গাইড
MKL25Z64VFM4 (32-hvqfn (5 mm x 5 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MKL25Z64VFM4.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
MKL25Z64VFM4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: USB Connected Sensor Node, Industrial Interface Module, Portable Data Logger, Low-Power Measurement Controller, USB Accessory and Dongle, Compact Control and Monitoring Board.
USB Connected Sensor Node
The MKL25Z64VFM4 fits a USB-connected environmental or industrial sensor because it combines a 48 MHz ARM Cortex-M0+ core, 64 KB of flash, and 8 KB of SRAM with a full-speed USB controller. The MCU can digitize sensor inputs, apply filtering, format data for the host, and maintain a USB device interface without a separate communications processor. The 32-HVQFN package also helps reduce board area in compact probes. A practical design should preserve a continuous USB return path, use short differential routing, place interface protection close to the connector, and follow the NXP clock and power-management initialization sequence.
সুপারিশকৃত
Industrial Interface Module
The MKL25Z64VFM4 is suitable for industrial interface modules that combine local control, USB connectivity, and mixed analog and digital signaling. Its 48 MHz Cortex-M0+ core can supervise communication tasks and real-time control logic, while 64 KB of flash and 8 KB of SRAM support protocol firmware, configuration tables, and buffered data. The 32-pin HVQFN footprint supports compact board construction, although the exposed pad and thermal design must be handled according to the manufacturer footprint. Engineers should isolate noisy motor, relay, or switching interfaces from sensitive USB and analog sections and validate the complete system at the intended 1.8 V, 2.5 V, or 3.3 V supply condition.
সুপারিশকৃত
Portable Data Logger
The MKL25Z64VFM4 can serve as the control center of a portable USB data logger because it provides 64 KB of nonvolatile firmware storage, 8 KB of SRAM, and a low-power ARM Cortex-M0+ processor with a 48 MHz maximum clock. The MCU can sample sensors, timestamp events, manage local buffering, and expose recorded data through full-speed USB when connected to a host. Its compact 32-HVQFN package leaves board area for storage, power management, and connectors. For reliable battery operation, firmware should use the documented low-power modes, disable unused peripherals, and control wake events. USB suspend behavior and power-path switching should be tested together because the host connection can materially affect the system's total energy budget.
সুপারিশকৃত
Low-Power Measurement Controller
The MKL25Z64VFM4 is appropriate for low-power measurement controllers that must acquire analog data, perform control calculations, and store configuration or results. Its 48 MHz Cortex-M0+ core provides deterministic execution for digital filtering and sensor conditioning, while the 8 KB SRAM supports short acquisition buffers and working variables. The Kinetis KL2 family's ultra-low-power positioning allows the controller to spend much of its operating cycle in a reduced-power state. Designers should calculate the timing margin at the lowest intended supply voltage, use the appropriate analog reference and decoupling arrangement, and confirm acquisition accuracy and standby current through hardware testing rather than relying only on nominal processor performance.
সুপারিশকৃত
USB Accessory and Dongle
The MKL25Z64VFM4 is well suited to compact USB accessories because it combines USB connectivity, a 48 MHz ARM Cortex-M0+ core, and a 32-pin HVQFN package in a small footprint. A dongle can enumerate as a full-speed USB device, implement a vendor-specific protocol, exchange configuration data, and include control logic for an attached sensor or peripheral. Its 64 KB flash supports application firmware and USB descriptors, while 8 KB of SRAM is available for packet staging and state management. Keep USB traces short and controlled, provide proper connector-side protection, and confirm the required clockless or crystal-based USB configuration in the NXP documentation for the selected firmware configuration.
সুপারিশকৃত
Compact Control and Monitoring Board
The MKL25Z64VFM4 can act as the central controller on a compact monitoring board that gathers digital inputs, performs basic analog functions, and communicates with a host over USB. Its Cortex-M0+ instruction set and 48 MHz operating rate are suitable for supervisory logic, communication protocols, and modest real-time control tasks. The 32-HVQFN package minimizes footprint, while 64 KB of flash provides room for firmware updates and device-specific configuration. Layout should separate analog, digital, and USB return paths, provide local supply decoupling at the package, and use a solid exposed-pad connection for electrical and thermal performance. Production software should include peripheral self-tests, boot recovery, and brownout-aware initialization.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MKL25Z64VFM4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | MKL26Z64VFM4 | MKL25Z128VFM4 | MKL25Z64VCM4 | MKL25Z32VFM4 | MKL25Z16VFM4 |
|---|---|---|---|---|---|---|
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Package | 32-HVQFN (5 mm x 5 mm) | 32-HVQFN (5 mm x 5 mm) | 32-HVQFN (5 mm x 5 mm) | 32-HVQFN (5 mm x 5 mm) | 32-HVQFN (5 mm x 5 mm) | 32-HVQFN (5 mm x 5 mm) |
| Flash Memory | 64 KB | 64 KB | 128 KB | 64 KB | 32 KB | 16 KB |
| Product Family | Kinetis KL25 | Kinetis KL26 / KL2x | Kinetis KL25 | Kinetis KL25 | Kinetis KL25 | Kinetis KL25 |
মূল পার্থক্যসমূহ
- Exact 64 KB and 8 KB memory balance (বনামMKL25Z128VFM4)
- Straightforward KL25-family software alignment (বনামMKL26Z64VFM4)
- Balanced firmware capacity for compact USB products (বনামMKL25Z16VFM4)
ডিজাইন নোট
Use the manufacturer land pattern for the 32-HVQFN package and connect the exposed pad to a properly designed ground plane. Place the high-frequency decoupling capacitor immediately beside the relevant supply pin and provide additional bulk capacitance near the power entry point. Preserve short return paths beneath USB and clock traces, and route sensitive analog inputs away from switching nodes and the exposed-pad heating area.
The device supports 1.8 V, 2.5 V, and 3.3 V operation, but the internal core, USB, analog, and I/O specifications can impose different voltage constraints. Confirm every supply rail against the Kinetis KL25 electrical-characteristics table, configure the internal regulator and clock tree in the required order, and verify brownout behavior at the lowest intended input voltage. Disable unused analog blocks and peripherals when calculating standby current.
Treat full-speed USB routing as a controlled-impedance interface rather than a generic low-speed connection. Keep the D+ and D+ pair geometry consistent, provide a continuous reference plane, minimize stubs and test pads, and place connector-side protection and filtering where they will not distort the cable or device impedance. Validate the completed board for USB enumeration, suspend, resume, and bus-powered current behavior.
A same-package suffix change does not guarantee identical firmware behavior. Before substituting another KL25 or KL2x device, compare flash size, SRAM, USB mode, clock configuration, pin multiplexing, peripheral assignments, boot behavior, temperature grade, and package markings. For the MKL26Z64VFM4 in particular, the expanded USB options can change the system architecture even though the VFM footprint remains the same.
কমপ্লায়েন্স তথ্য
The product is an industrial and commercial embedded microcontroller. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the referenced material.