NXP Semiconductors

MKL25Z64VFM4 - 48MHz Cortex-M0+ 64KB Flash MCU | NXP

MPN: MKL25Z64VFM4 ✓ فعال
1.8 V / 2.5 V / 3.3 V Vdss 32-HVQFN (5 mm x 5 mm) Package 48 MHz Speed 64 KB (64K x 8 bits) Memory
حداقل سفارش: 1 |

MKL25Z64VFM4 نمای کلی

The NXP Semiconductors MKL25Z64VFM4 is a 32-bit ARM Cortex-M0+ microcontroller operating at up to 48 MHz, with 64 KB of flash memory, 8 KB of SRAM, and full-speed USB support in a 32-pin HVQFN package measuring 5 mm by 5 mm. The device combines a low-power MCU architecture with analog and digital peripherals for compact embedded systems.

A microcontroller is an integrated circuit that executes embedded software, reads sensor inputs, controls actuators, and manages communication interfaces. The MKL25Z64VFM4 belongs to the Kinetis KL2 ultra-low-power MCU family, placing it within the hierarchy of embedded microcontroller, ARM Cortex processor, and low-power embedded-system device.

Principal features include a 48 MHz ARM Cortex-M0+ core, 64 KB of flash organized as 64K by 8 bits, and 8 KB of SRAM. The part also includes a full-speed USB controller, analog and digital peripherals, and support for 1.8 V, 2.5 V, and 3.3 V operation. Its 32-pin HVQFN package supports dense PCB layouts without relying on a large leaded package.

The Kinetis KL2 architecture is designed for embedded applications where processing capability, USB connectivity, and low-power operation must coexist in a compact footprint. The 64 KB flash capacity provides room for bootloader code, application firmware, configuration data, and USB device functions, while the 8 KB SRAM allows real-time tasks and peripheral buffering without external memory.

Typical uses include USB-connected sensors, compact data loggers, industrial interface modules, portable measurement equipment, and low-power embedded controllers. The full-speed USB interface can simplify connection to a host system, while the Cortex-M0+ core provides a common architecture for firmware development and peripheral control.

PCB design should account for the exposed pad beneath the HVQFN package, provide adequate thermal and electrical grounding, and place decoupling capacitors close to the supply pins. USB routing requires careful control of trace geometry and return paths, and firmware should use the manufacturer's clock, power-management, and USB initialization procedures.

This product page combines the core Kinetis KL25 specifications, package information, design guidance, and qualified drop-in alternatives to support component selection, firmware planning, PCB layout, and replacement decisions without requiring engineers to reconstruct the design context from separate documents.

جایگزین‌های drop-in برای MKL25Z64VFM4 — همان پکیج، سازگار پین‌به‌پین. قطعات با پکیج متفاوت که نیاز به تغییر PCB دارند مستثنی هستند.

گونه‌ها در این سری

مدل‌های هم‌سری که جایگزین مستقیم هستند برای MKL25Z64VFM4 (همان فرم‌فاکتور و فوت‌پرینت) — متفاوت در Flash Memory, Package, Product Family, USB Controller.

NXP Semiconductors
Flash Memory: 64 KB (64K x 8)
Package: 32-HVQFN (5x5 mm) with exposed pad
Product Family: Kinetis KL2x (Kinetis L)
مقایسه با MKL25Z64VFM4 →

MKL26Z64VFM4

✅ جایگزین مستقیم
NXP Semiconductors
📦 32-HVQFN (5 mm x 5 mm)
ARM Cortex-M0+ · 32-bit · 48 MHz · 64 KB (64K x 8) · 8 KB · 1.8 V / 2.5 V / 3.3 V · USB 2.0 full-speed OTG with crystal-less USB device · 32-HVQFN (5x5 mm) with exposed pad

برای قیمت تماس بگیرید

مشاهده دیتاشیت ←

MKL25Z128VFM4

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 32-HVQFN (5 mm x 5 mm)
Flash increases from 64 KB to 128 KB, a 100% increase; core frequency and package remain matched

📋 جایگزین مرجع (خارج از کاتالوگ)

MKL25Z64VCM4

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 32-HVQFN (5 mm x 5 mm)
Flash remains 64 KB while the C temperature-grade suffix changes qualification range; package remains VFM

📋 جایگزین مرجع (خارج از کاتالوگ)

MKL25Z32VFM4

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 32-HVQFN (5 mm x 5 mm)
Flash decreases from 64 KB to 32 KB, a 50% reduction; package remains VFM

📋 جایگزین مرجع (خارج از کاتالوگ)

MKL25Z16VFM4

✅ جایگزین مستقیم ⚠️ مشخصات تأییدنشده
📦 32-HVQFN (5 mm x 5 mm)
Flash decreases from 64 KB to 16 KB, a 75% reduction; package remains VFM

📋 جایگزین مرجع (خارج از کاتالوگ)

MKL25Z64VFM4 حداکثر مقادیر مجاز و مشخصات الکتریکی

Product Type 32-bit ARM Cortex-M0+ microcontroller
Product Family Kinetis KL25 / Kinetis KL2
Maximum Core Frequency 48 MHz
CPU Core ARM Cortex-M0+
Architecture 32-bit RISC
Flash Memory 64 KB (64K x 8 bits)
SRAM 8 KB
USB Controller Full-speed USB 2.0
Supply Voltage Options 1.8 V / 2.5 V / 3.3 V
بسته‌بندی 32-HVQFN (5 mm x 5 mm)
تعداد پایه 32 pins
نوع نصب Surface mount
Core Count 1 core
Peripheral Category Analog and digital peripherals
Power Class Ultra-low-power MCU
Datasheet Length 59 pages
Tray Packaging Tray
RoHS Compliance unknown
REACH Compliance unknown

راهنمای پیکربندی پین MKL25Z64VFM4 32-hvqfn (5 mm x 5 mm)

پیکربندی پین برای MKL25Z64VFM4 (پکیج 32-hvqfn (5 mm x 5 mm)). این IC دیجیتال شامل GPIO، رابط‌های ارتباطی (UART، SPI، I2C) و پین‌های تغذیه است. برای عملکردهای جایگزین پین و گزینه‌های پیکربندی به دیتاشیت سازنده مراجعه کنید. ضروری برای طراحی سیستم‌های نهفته و چیدمان PCB.

نمودار پین‌آوت پکیج 32-hvqfn (5 mm x 5 mm) برای MKL25Z64VFM4

داده پین‌آوت تفصیلی موجود نیست برای MKL25Z64VFM4.

به دیتاشیت برای پیکربندی کامل پین‌ها.

کاربردهای معمول

MKL25Z64VFM4 مناسب است برای 6 کاربردs: USB Connected Sensor Node, Industrial Interface Module, Portable Data Logger, Low-Power Measurement Controller, USB Accessory and Dongle, Compact Control and Monitoring Board.

🧩

USB Connected Sensor Node

The MKL25Z64VFM4 fits a USB-connected environmental or industrial sensor because it combines a 48 MHz ARM Cortex-M0+ core, 64 KB of flash, and 8 KB of SRAM with a full-speed USB controller. The MCU can digitize sensor inputs, apply filtering, format data for the host, and maintain a USB device interface without a separate communications processor. The 32-HVQFN package also helps reduce board area in compact probes. A practical design should preserve a continuous USB return path, use short differential routing, place interface protection close to the connector, and follow the NXP clock and power-management initialization sequence.

🏭

Industrial Interface Module

The MKL25Z64VFM4 is suitable for industrial interface modules that combine local control, USB connectivity, and mixed analog and digital signaling. Its 48 MHz Cortex-M0+ core can supervise communication tasks and real-time control logic, while 64 KB of flash and 8 KB of SRAM support protocol firmware, configuration tables, and buffered data. The 32-pin HVQFN footprint supports compact board construction, although the exposed pad and thermal design must be handled according to the manufacturer footprint. Engineers should isolate noisy motor, relay, or switching interfaces from sensitive USB and analog sections and validate the complete system at the intended 1.8 V, 2.5 V, or 3.3 V supply condition.

📱

Portable Data Logger

The MKL25Z64VFM4 can serve as the control center of a portable USB data logger because it provides 64 KB of nonvolatile firmware storage, 8 KB of SRAM, and a low-power ARM Cortex-M0+ processor with a 48 MHz maximum clock. The MCU can sample sensors, timestamp events, manage local buffering, and expose recorded data through full-speed USB when connected to a host. Its compact 32-HVQFN package leaves board area for storage, power management, and connectors. For reliable battery operation, firmware should use the documented low-power modes, disable unused peripherals, and control wake events. USB suspend behavior and power-path switching should be tested together because the host connection can materially affect the system's total energy budget.

🖥️

Low-Power Measurement Controller

The MKL25Z64VFM4 is appropriate for low-power measurement controllers that must acquire analog data, perform control calculations, and store configuration or results. Its 48 MHz Cortex-M0+ core provides deterministic execution for digital filtering and sensor conditioning, while the 8 KB SRAM supports short acquisition buffers and working variables. The Kinetis KL2 family's ultra-low-power positioning allows the controller to spend much of its operating cycle in a reduced-power state. Designers should calculate the timing margin at the lowest intended supply voltage, use the appropriate analog reference and decoupling arrangement, and confirm acquisition accuracy and standby current through hardware testing rather than relying only on nominal processor performance.

🔌

USB Accessory and Dongle

The MKL25Z64VFM4 is well suited to compact USB accessories because it combines USB connectivity, a 48 MHz ARM Cortex-M0+ core, and a 32-pin HVQFN package in a small footprint. A dongle can enumerate as a full-speed USB device, implement a vendor-specific protocol, exchange configuration data, and include control logic for an attached sensor or peripheral. Its 64 KB flash supports application firmware and USB descriptors, while 8 KB of SRAM is available for packet staging and state management. Keep USB traces short and controlled, provide proper connector-side protection, and confirm the required clockless or crystal-based USB configuration in the NXP documentation for the selected firmware configuration.

⚡

Compact Control and Monitoring Board

The MKL25Z64VFM4 can act as the central controller on a compact monitoring board that gathers digital inputs, performs basic analog functions, and communicates with a host over USB. Its Cortex-M0+ instruction set and 48 MHz operating rate are suitable for supervisory logic, communication protocols, and modest real-time control tasks. The 32-HVQFN package minimizes footprint, while 64 KB of flash provides room for firmware updates and device-specific configuration. Layout should separate analog, digital, and USB return paths, provide local supply decoupling at the package, and use a solid exposed-pad connection for electrical and thermal performance. Production software should include peripheral self-tests, boot recovery, and brownout-aware initialization.

خلاصه محصولات پیشنهادی

MKL26Z64VFM4 NXP Semiconductors استفاده‌شده در: USB Connected Sensor Node, Industrial Interface Module, Portable Data Logger, USB Accessory and Dongle, Compact Control and Monitoring Board MKL25Z128VFM4 Same-package MCU with additional flash استفاده‌شده در: USB Connected Sensor Node, Portable Data Logger, USB Accessory and Dongle MKL25Z64VCM4 Same-package option for a different temperature grade استفاده‌شده در: Industrial Interface Module, Compact Control and Monitoring Board MKL25Z32VFM4 Lower-flash same-package option for simpler firmware استفاده‌شده در: Low-Power Measurement Controller MKL25Z16VFM4 Minimum-memory same-package family variant استفاده‌شده در: Low-Power Measurement Controller
What is MKL25Z64VFM4?
The MKL25Z64VFM4 is a 32-bit ARM Cortex-M0+ microcontroller with a 48 MHz core, 64 KB of flash memory, 8 KB of SRAM, and full-speed USB support. According to the NXP product page, it combines USB, analog, and digital peripherals for ultra-low-power embedded applications, and the device is packaged in a 32-HVQFN package measuring 5 mm by 5 mm.
What are the key specifications of MKL25Z64VFM4 that engineers should know?
The MKL25Z64VFM4 integrates a 48 MHz ARM Cortex-M0+ core, 64 KB of flash, 8 KB of SRAM, and full-speed USB in a 32-HVQFN package. The NXP product information identifies a 32-bit MCU with USB and analog and digital peripherals. Its 1.8 V, 2.5 V, and 3.3 V operating options make it suitable for compact low-power systems using common embedded supply rails.
Where can I download the MKL25Z64VFM4 datasheet PDF?
The official MKL25Z64VFM4 datasheet and product documentation are available from the NXP product page at https://www.nxp.com/part/MKL25Z64VFM4. The published Kinetis KL25 document is 59 pages and describes the device's electrical characteristics, pin functions, memory organization, USB behavior, clocks, power management, and package information.
Where can I find the MKL25Z64VFM4 pinout?
The MKL25Z64VFM4 pinout is published in the pin-description table of the NXP Kinetis KL25 datasheet. The component uses a 32-HVQFN package with an exposed pad, so PCB designers should use the manufacturer's land pattern and exposed-pad requirements rather than assigning connections from a generic 32-pin QFN drawing.
What memory resources does the MKL25Z64VFM4 provide?
The MKL25Z64VFM4 provides 64 KB of flash memory organized as 64K by 8 bits and 8 KB of SRAM. According to the NXP product information, these resources suit embedded firmware, configuration storage, USB device functions, and peripheral data handling in compact low-power designs.
What is the operating frequency of MKL25Z64VFM4?
The MKL25Z64VFM4 operates at up to 48 MHz. The NXP product page describes it as a 32-bit ARM Cortex-M0+ MCU, and distributor technical summaries identify the 48 MHz operating rate. This frequency is suitable for control loops, USB device firmware, and moderate real-time embedded workloads.
Is MKL25Z64VFM4 suitable for USB peripheral designs?
Yes, the MKL25Z64VFM4 is suitable for USB peripheral designs because it includes a full-speed USB 2.0 controller. The 48 MHz Cortex-M0+ core and 64 KB of flash can support device firmware, while the 8 KB SRAM provides working memory for USB descriptors and peripheral buffering.
MKL25Z64VFM4 vs MKL26Z64VFM4 - which is better for a USB design?
The MKL26Z64VFM4 is the closer same-family choice for designs requiring full-speed USB On-The-Go or crystal-less USB operation because it belongs to the broader Kinetis KL2x range. The NXP KL2x description identifies these USB-capable modes. Both parts are listed in the 32-pin VFM configuration, but firmware, clock, and USB feature requirements should be checked against the current NXP documentation.
What is the best drop-in replacement for MKL25Z64VFM4?
The MKL26Z64VFM4 is the best-supported same-package alternative in the available cross-reference information because it retains the Kinetis KL2x family, 64 KB flash configuration, and VFM package designation. Engineers should verify the exact USB mode, peripheral allocation, pin configuration, and migration guidance before treating it as a production drop-in replacement.
What can replace MKL25Z64VFM4?
MKL25-family devices with the same VFM package can serve as board-level alternatives when their flash size and qualification grade meet the design requirements. MKL25Z128VFM4 offers 128 KB of flash, while MKL25Z32VFM4 and MKL25Z16VFM4 provide smaller memory configurations. MKL26Z64VFM4 retains 64 KB of flash but changes the family feature set.
When should I choose MKL25Z64VFM4 over MKL26Z64VFM4?
Choose MKL25Z64VFM4 when the design requires the specific KL25 USB feature set rather than the expanded KL2x USB options offered by MKL26Z64VFM4. Both provide a 48 MHz ARM Cortex-M0+ core, 64 KB of flash, and a 32-pin VFM package. Confirm the required USB device, host, or crystal-less operating mode in the NXP documentation.
Is MKL25Z64VFM4 suitable for low-power embedded products?
Yes, the MKL25Z64VFM4 is intended for ultra-low-power embedded products. The NXP product page identifies the device as an ultra-low-power MCU with USB, analog, and digital peripherals. Low-power performance should be evaluated using the configured clock tree, active mode, sleep and stop states, enabled peripherals, and operating voltage.
Where can I buy MKL25Z64VFM4 and what is its price?
Use the Request a Quote form on this page to request MKL25Z64VFM4 pricing, current availability, and lead time. The device is a standard 32-HVQFN NXP microcontroller listed for distribution, but current commercial terms can change and should be confirmed through the quote workflow before placing an order.
What is the lead time for MKL25Z64VFM4?
Request the current MKL25Z64VFM4 lead time through the Request a Quote form on this page. Lead time can depend on factory inventory, package configuration, order quantity, and customer qualification status. The manufacturer product page remains the authoritative source for current part information and lifecycle documentation.
Is MKL25Z64VFM4 in stock?
Current MKL25Z64VFM4 stock should be confirmed through the Request a Quote form on this page because availability changes with procurement volume and factory replenishment. The NXP product page and distributor listings identify the component as an orderable catalog part, but they do not provide a permanent stock guarantee for a specific order.
What layout considerations apply to the MKL25Z64VFM4 HVQFN package?
Place the exposed pad on a ground-connected PCB land pattern and follow the NXP recommended footprint, solder mask, and paste geometry. Connect decoupling capacitors close to the relevant supply pins, preserve a continuous return path beneath USB traces, and avoid routing sensitive signals through thermal and USB switching regions.

داده‌های مرجع مهندسی برای MKL25Z64VFM4 — مقایسه، راهنمای طراحی و اطلاعات انطباق.

راهنمای انتخاب

Choose MKL25Z64VFM4 when a compact embedded product needs a 48 MHz ARM Cortex-M0+ core, 64 KB of flash, 8 KB of SRAM, and full-speed USB in a 32-HVQFN package. It is a practical fit for sensor nodes, data loggers, USB accessories, and small industrial interface modules whose firmware benefits from KL25-family continuity. Select MKL25Z128VFM4 when doubled flash capacity is useful and the same family and footprint remain important. Use MKL26Z64VFM4 when the design specifically requires the broader KL2x USB choices, such as OTG or crystal-less operation, after checking migration requirements. MKL25Z32VFM4 and MKL25Z16VFM4 can simplify cost-sensitive products when their reduced memory is sufficient, but they are not firmware-neutral substitutions when application code exceeds their flash capacity. Confirm temperature grade, USB mode, exposed-pad layout, and lifecycle requirements before releasing a production BOM.

مقایسه با جایگزین‌ها

پارامتر این محصول MKL26Z64VFM4 MKL25Z128VFM4 MKL25Z64VCM4 MKL25Z32VFM4 MKL25Z16VFM4
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 32-HVQFN (5 mm x 5 mm) 32-HVQFN (5 mm x 5 mm) 32-HVQFN (5 mm x 5 mm) 32-HVQFN (5 mm x 5 mm) 32-HVQFN (5 mm x 5 mm) 32-HVQFN (5 mm x 5 mm)
Flash Memory 64 KB 64 KB 128 KB 64 KB 32 KB 16 KB
Product Family Kinetis KL25 Kinetis KL26 / KL2x Kinetis KL25 Kinetis KL25 Kinetis KL25 Kinetis KL25

تفاوت‌های کلیدی

  • Exact 64 KB and 8 KB memory balance (در مقابلMKL25Z128VFM4)
  • Straightforward KL25-family software alignment (در مقابلMKL26Z64VFM4)
  • Balanced firmware capacity for compact USB products (در مقابلMKL25Z16VFM4)

یادداشت‌های طراحی

Use the manufacturer land pattern for the 32-HVQFN package and connect the exposed pad to a properly designed ground plane. Place the high-frequency decoupling capacitor immediately beside the relevant supply pin and provide additional bulk capacitance near the power entry point. Preserve short return paths beneath USB and clock traces, and route sensitive analog inputs away from switching nodes and the exposed-pad heating area.

The device supports 1.8 V, 2.5 V, and 3.3 V operation, but the internal core, USB, analog, and I/O specifications can impose different voltage constraints. Confirm every supply rail against the Kinetis KL25 electrical-characteristics table, configure the internal regulator and clock tree in the required order, and verify brownout behavior at the lowest intended input voltage. Disable unused analog blocks and peripherals when calculating standby current.

Treat full-speed USB routing as a controlled-impedance interface rather than a generic low-speed connection. Keep the D+ and D+ pair geometry consistent, provide a continuous reference plane, minimize stubs and test pads, and place connector-side protection and filtering where they will not distort the cable or device impedance. Validate the completed board for USB enumeration, suspend, resume, and bus-powered current behavior.

A same-package suffix change does not guarantee identical firmware behavior. Before substituting another KL25 or KL2x device, compare flash size, SRAM, USB mode, clock configuration, pin multiplexing, peripheral assignments, boot behavior, temperature grade, and package markings. For the MKL26Z64VFM4 in particular, the expanded USB options can change the system architecture even though the VFM footprint remains the same.

اطلاعات انطباق

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
بدون سرب
Unknown
بدون هالوژن
Unknown
مواد معدنی درگیری
Unknown

The product is an industrial and commercial embedded microcontroller. RoHS, REACH, lead-free, halogen-free, and conflict-minerals declarations were not identified in the referenced material.

تاریخ تأیید داده‌ها: 2026-11-14 — داده‌ها توسط تیم مهندسی قطعات XAIPART تأیید و گردآوری شده است

جستجوهای مرتبط

MKL25Z64VFM4 datasheet MKL25Z64VFM4 pinout MKL25Z64VFM4 datasheet pdf MKL25Z64VFM4 equivalent MKL25Z64VFM4 replacement MKL25Z64VFM4 cross reference MKL25Z64VFM4 vs MKL26Z64VFM4 MKL25Z64VFM4 footprint MKL25Z64VFM4 application circuit MKL25Z64VFM4 price MKL25Z64VFM4 stock NXP MKL25Z64VFM4 MKL25Z64VFM4 48MHz Cortex-M0+ MKL25Z64VFM4 32-HVQFN pinout MKL25Z64VFM4 USB controller

قطعات و اصطلاحات مرتبط

NXP Semiconductors MKL25Z64VFM4 MKL26Z64VFM4 MKL25Z128VFM4 MKL25Z32VFM4 MKL25Z16VFM4 Kinetis KL25 Kinetis KL2x ARM Cortex-M0+ 32-bit RISC microcontroller embedded microcontroller ultra-low-power MCU full-speed USB 2.0 32-HVQFN QFN package family surface-mount package 64 KB flash memory 8 KB SRAM 48 MHz processor USB sensor node industrial interface module portable data logger low-power embedded control exposed pad full-speed USB device controller
استعلام قیمت سریع RFQ
جزئیات کامل را پر کنید — تیم فروش ما ظرف 24 ساعت پاسخ خواهد داد
شماره قطعه سازنده بسته‌بندی QTY قیمت هدف قیمت کل
✓
استعلام قیمت ارسال شد!

ظرف ۲۴ ساعت به ایمیل شما پاسخ خواهیم داد

1
درخواست قیمت ارسال شد
2
استعلام دریافت شد
3
سفارش ثبت شد
4
پرداخت
5
ارسال شد
6
تحویل داده شد
مشاهده جزئیات RFQ