Texas Instruments

MSP430F5338IPZ - 20 MHz Mixed-Signal MCU | Texas Instruments

MPN: MSP430F5338IPZ ✓ সক্রিয়
2.5 V to 3.3 V Vdss 100-LQFP (14 x 14 mm) Package 20 MHz Speed 256 KB Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MSP430F5338IPZ সারাংশ

Texas Instruments MSP430F5338IPZ is an ultra-low-power mixed-signal microcontroller with a 16-bit RISC MSP430 CPU, 20 MHz operating frequency, 256 KB of Flash memory, and 18 KB of SRAM. It integrates a 12-bit ADC, a 12-bit DAC, comparators, DMA, UART, SPI, and I2C peripherals in a 100-pin LQFP package rated for 2.5 V or 3.3 V operation. The device is positioned for portable measurement, industrial instrumentation, energy monitoring, and embedded control systems that require analog signal acquisition alongside low-power digital processing.

An MSP430 mixed-signal microcontroller combines a 16-bit RISC processing core, 16-bit registers, constant generators, and low-power operating modes with on-chip analog and communication peripherals. The MSP430 architecture is designed around efficient instruction execution and deterministic peripheral handling, helping embedded systems balance measurement accuracy, response time, and battery consumption.

Key features include 256 KB of Flash for firmware storage, 18 KB of SRAM for working data, a 12-bit ADC for analog-to-digital conversion, and a 12-bit DAC for programmable analog output. The integrated DMA controller supports efficient data movement between peripherals and memory, while UART, SPI, and I2C interfaces provide connectivity for sensors, transceivers, external memory, and industrial peripherals. The MSP430F5338IPZ is supplied in a 100-LQFP 14 x 14 mm package.

The 20 MHz CPU clock provides deterministic mixed-signal processing capability for measurement loops, signal conditioning workflows, and control algorithms. Five low-power operating modes are highlighted for portable measurement applications where duty-cycled sampling can reduce energy use between measurements. The integrated analog front end also reduces the need for discrete converters in instrumentation designs.

Typical applications include portable energy meters, industrial process sensors, data loggers, battery-powered measurement instruments, environmental monitoring systems, and low-power industrial controllers. The ADC, DAC, comparators, and multiple serial interfaces make the MCU suitable for designs that acquire analog quantities and communicate results to a host processor or external network interface.

When laying out a board, route analog inputs and DAC outputs away from high-current switching nodes, provide stable bypass capacitors at the supply pins, and follow the pin-description table in the manufacturer datasheet before assigning PCB tracks. This page combines the manufacturer product information, distributor listings, package details, drop-in alternatives, and design guidance to support component selection and board planning.

এর জন্য ড্রপ-ইন বিকল্প MSP430F5338IPZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MSP430F5338IPZ (একই form factor এবং footprint) — পার্থক্য রয়েছে ADC Resolution, CPU Architecture, Comparator, DAC Resolution, Flash Memory.

Texas Instruments
ADC Resolution: 12 bit
CPU Architecture: MSP430 CPUXV2 16-bit RISC
Comparator: Integrated
এর সাথে তুলনা করুন MSP430F5338IPZ →

MSP430F5338IPZR

✅ ড্রপ-ইন
📦 100-LQFP (14 x 14 mm)
Same MSP430F5338 silicon and 100-LQFP package; ordering suffix changes the packaging format, with no identified electrical or pinout difference

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MSP430F6436IPZR

✅ ড্রপ-ইন
📦 100-LQFP (14 x 14 mm)
Same Texas Instruments MSP430 mixed-signal family and 100-LQFP package; memory size and peripheral configuration differ, so firmware and pin-function assignments require verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MSP430F5338IPZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

CPU Architecture 16-bit RISC MSP430
Maximum CPU Frequency 20 MHz
Flash Memory 256 KB
SRAM 18 KB
ADC Resolution 12-bit
DAC Resolution 12-bit
Comparator Integrated comparator
DMA Controller Integrated DMA
Serial Interfaces UART, SPI, I2C
সাপ্লাই ভোল্টেজ 2.5 V to 3.3 V
Low-Power Operating Modes 5 low-power modes
Registers 16-bit
প্যাকেজ 100-LQFP (14 x 14 mm)
মাউন্টিং টাইপ Surface Mount
RoHS স্ট্যাটাস RoHS-compliant
Lead-Free Status Lead-free
পিন সংখ্যা 100 pins

MSP430F5338IPZ 100-lqfp (14 x 14 mm) পিন কনফিগারেশন গাইড

MSP430F5338IPZ (100-lqfp (14 x 14 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

MSP430F5338IPZ-এর জন্য 100-lqfp (14 x 14 mm) প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MSP430F5338IPZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MSP430F5338IPZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable Energy Meter, Industrial Process Sensor, Battery-Powered Data Logger, Environmental Monitoring Node, Precision Analog Control System, Instrumentation and Test Equipment.

⚡

Portable Energy Meter

The MSP430F5338IPZ fits portable energy-meter designs because it combines a 20 MHz 16-bit MSP430 CPU with 256 KB of Flash and 18 KB of SRAM for measurement routines, calibration tables, and communication firmware. Its integrated 12-bit ADC acquires voltage or current-sensor signals without requiring a separate converter, while the 12-bit DAC can generate test or calibration stimuli. Five low-power operating modes support duty-cycled measurement. DMA can move conversion results without unnecessary CPU intervention, and UART or SPI can connect to a display or communications module.

🏭

Industrial Process Sensor

The MSP430F5338IPZ is appropriate for industrial process sensing where several analog inputs must be converted, filtered, and acted on by deterministic firmware. Its 12-bit ADC samples process signals, the comparator supports threshold detection, and the 100-pin LQFP package provides numerous general-purpose I/O pins for sensors and actuators. UART, SPI, and I2C interfaces allow connection to industrial transceivers, remote sensor nodes, or local displays. The 20 MHz CPU provides headroom for compensation loops and protocol handling without requiring a separate processor.

🧩

Battery-Powered Data Logger

The MSP430F5338IPZ supports battery-powered data logging by combining integrated analog conversion with five low-power operating modes and 18 KB of SRAM for measurement buffers. A 256 KB Flash region accommodates firmware, event records, and calibration coefficients, reducing the need for external storage in low-duty-cycle systems. The ADC can capture temperature, pressure, or light sensor outputs, while DMA transfers samples efficiently between memory and peripherals. SPI or I2C can connect to serial flash or a radio module for periodic data upload.

🌐

Environmental Monitoring Node

The MSP430F5338IPZ can serve as the control center of an environmental monitoring node that measures air quality, humidity, or light and reports results over a low-power serial link. Its integrated 12-bit ADC reduces system complexity when the selected sensors produce analog outputs, while the comparator can implement simple threshold events without continuous software polling. The 12-bit DAC supports sensor calibration or analog excitation. UART, SPI, and I2C make the device adaptable to different sensor boards, and the low-power modes suit remote, battery-operated deployments.

🔧

Precision Analog Control System

The MSP430F5338IPZ is suitable for closed-loop analog control systems that need both measurement and programmable output on one MCU. The 12-bit ADC closes the feedback loop, the 12-bit DAC generates the control voltage or offset, and the comparator can detect limits quickly. A 20 MHz CPU provides deterministic execution for control calculations, while DMA helps sustain sample timing. The 100-LQFP package offers enough I/O for external amplifiers, reference components, status indicators, and a service interface.

📟

Instrumentation and Test Equipment

The MSP430F5338IPZ supports compact instrumentation platforms that combine signal acquisition, control, and communications in a single mixed-signal MCU. Its 12-bit ADC and DAC enable measurement and stimulus functions, while DMA handles transfers between the converter and memory. The 256 KB of Flash provides room for calibration tables, test sequences, and interface firmware. UART, SPI, and I2C simplify connection to displays, storage devices, and automated test controllers, making the device practical for portable measurement instruments.

What is the operating voltage of the MSP430F5338IPZ?
The MSP430F5338IPZ operates from 2.5 V to 3.3 V, according to the Texas Instruments MSP430F5338 product page and distributor specification listings. This supply range supports both 2.5 V and 3.3 V system rails. The device integrates a 20 MHz MSP430 16-bit RISC CPU, 256 KB of Flash, and 18 KB of SRAM, making it suitable for low-power measurement and control systems using either common embedded supply voltage.
How much Flash and SRAM does the MSP430F5338 have?
The MSP430F5338 provides 256 KB of Flash memory and 18 KB of SRAM. Texas Instruments identifies the MCU as a 20 MHz mixed-signal microcontroller with a 16-bit RISC MSP430 CPU and 16-bit registers. The Flash capacity supports larger firmware and application code, while the SRAM provides working memory for acquisition buffers, protocol handling, and real-time control tasks in portable and industrial measurement equipment.
What peripherals are integrated in the MSP430F5338IPZ?
The MSP430F5338IPZ integrates a 12-bit ADC, a 12-bit DAC, a comparator, a DMA controller, and UART, SPI, and I2C serial interfaces. The Texas Instruments product page lists this mixed-signal feature set for the device. These peripherals support analog measurement, programmable analog output, efficient peripheral-to-memory transfers, and connection to sensors, external memory, transceivers, and other embedded-system components.
Where can I download the MSP430F5338 datasheet PDF?
The official MSP430F5338 datasheet is available through the Texas Instruments product page at https://www.ti.com/product/MSP430F5338. Use the datasheet link on that page for the PDF and the latest device documentation, including the pin-description table, electrical characteristics, memory map, and peripheral information. The manufacturer page is the preferred source over third-party datasheet mirrors because it provides the current revision and supporting documentation.
Where can I find the MSP430F5338IPZ pinout?
The MSP430F5338IPZ pinout is defined by the 100-pin LQFP package documentation in the manufacturer datasheet. The Texas Instruments product page identifies the MSP430F5338 as a 100-LQFP, 14 x 14 mm device and provides the corresponding technical documentation. Use the pin-description table and package drawing in that document when assigning ports, analog inputs, power rails, ground connections, and programming interface signals.
Is the MSP430F5338IPZ suitable for battery-powered measurement?
Yes, the MSP430F5338IPZ is suitable for battery-powered measurement because it combines a 20 MHz MSP430 CPU with five low-power operating modes. Texas Instruments describes the MSP430 family as optimized for extended battery life in portable measurement applications. Duty-cycled sampling, sleep-mode use, and the integrated 12-bit ADC and 12-bit DAC can help reduce external component count and support low-energy instrument designs.
What is the difference between the MSP430F5338IPZ and MSP430F5338IPZR?
The MSP430F5338IPZ and MSP430F5338IPZR refer to the same MSP430F5338 device in the same 100-LQFP package, with the ordering code differing in the packaging or shipping format. A FindIC comparison identifies MSP430F5338IPZR as the matched variant. Check the manufacturer ordering information for the exact reel, tray, or tape-and-reel configuration before substituting one order code for another.
What is the best drop-in replacement for the MSP430F5338IPZ?
The closest web-identified replacement candidate is the MSP430F5338IPZR, which retains the MSP430F5338 device identity and 100-LQFP package, but its ordering suffix represents a different packaging configuration rather than a genuinely different silicon option. For a true alternate silicon source, the MSP430F6436IPZR appears in comparison data, although its memory map, peripheral configuration, and software compatibility require full design review before substitution.
Can the MSP430F6436IPZR replace the MSP430F5338IPZ?
The MSP430F6436IPZR is a candidate for engineering review, but it should not be treated as an automatic drop-in replacement without a complete peripheral, memory, and software audit. FindIC lists it in direct comparison with the MSP430F5338IPZ, confirming that it is a relevant device family alternative. Firmware, peripheral mapping, memory sizing, and application requirements must be checked before using it in an existing design.
When should I choose the MSP430F5338 instead of a higher-memory MSP430 variant?
Choose the MSP430F5338 when its 256 KB of Flash, 18 KB of SRAM, integrated 12-bit ADC and DAC, and 100-LQFP interface meet the design requirements without requiring the larger memory or additional resources of another family member. The MSP430 architecture and peripheral set make it a natural choice for portable and industrial measurement systems. Select a larger-memory variant when application code, data buffers, connectivity stacks, or future expansion exceed the available resources.
Is the MSP430F5338IPZ suitable for industrial sensor applications?
Yes, the MSP430F5338IPZ fits industrial sensor applications that require local analog measurement and low-power serial connectivity. Its integrated 12-bit ADC and DAC reduce the need for separate analog converters, while DMA, UART, SPI, and I2C support sensor acquisition and external communications. The 100-LQFP package provides a substantial pin count for multiple digital interfaces, and the 20 MHz CPU supports deterministic control tasks.
Where can I buy the MSP430F5338IPZ online?
Use the Request a Quote form on this page to request the MSP430F5338IPZ, current availability, and a formal quotation. The component is listed by Texas Instruments and appears in distributor catalogs, including DigiKey, Mouser, and Octopart listings, but the platform handles customer quotations directly. Provide the required quantity, shipment destination, and date sensitivity when submitting the request.
What is the price of the MSP430F5338IPZ?
Current customer pricing for the MSP430F5338IPZ is handled through the Request a Quote form on this page, where the unit cost can be matched to quantity and shipment requirements. Distributor listings may show different commercial terms, quantity breaks, and currency conventions. Submit the required quantity and purchasing schedule for a quotation tied to the exact 100-LQFP order code.
What is the lead time for the MSP430F5338IPZ?
The current lead time for the MSP430F5338IPZ should be requested through the Request a Quote form on this page using the required quantity and target delivery date. Lead time varies with order volume, factory availability, and purchase scheduling rather than being fixed by the device specifications. Distributor listings may show stock or estimated delivery information, but a project-specific confirmation is preferable for production planning.
Is the MSP430F5338IPZ currently in stock?
Stock status for the MSP430F5338IPZ changes with procurement volume and channel inventory, so use the Request a Quote form on this page for a current availability response. Distributor catalog pages for this exact MPN can include inventory statements, but those are time-sensitive. Include your required quantity, target date, and shipment destination so the quotation can reflect an actionable supply position.
How do I design the power and analog layout for the MSP430F5338IPZ?
Place the supply bypass capacitors close to the device power pins, route analog inputs and DAC outputs away from noisy digital and switching paths, and use a continuous ground plane with careful partitioning of analog returns. Follow the manufacturer datasheet for the exact pin assignments and recommended external-component values. Analog layout quality directly affects the noise performance and repeatability of the integrated 12-bit ADC.
What are the key specifications of the MSP430F5338IPZ that engineers should know?
The MSP430F5338IPZ combines a 20 MHz 16-bit MSP430 RISC CPU, 256 KB of Flash, 18 KB of SRAM, a 12-bit ADC, a 12-bit DAC, a comparator, DMA, and UART, SPI, and I2C interfaces. It operates from 2.5 V to 3.3 V and is packaged in a 100-LQFP 14 x 14 mm device. Texas Instruments also highlights five low-power operating modes for portable measurement designs.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MSP430F5338IPZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MSP430F5338IPZ when a design needs a 20 MHz 16-bit MSP430 controller with 256 KB of Flash, 18 KB of SRAM, a 12-bit ADC, a 12-bit DAC, DMA, and multiple serial interfaces in a 100-LQFP package. It is a strong fit for portable meters, industrial sensors, data loggers, and compact instrumentation where analog conversion and low-power operation are central. The MSP430F5338IPZR is the natural choice when the same device and package are required but the ordering format differs. Consider the MSP430F6436IPZR only after auditing memory, peripherals, pin multiplexing, and firmware. Cross-brand drop-in alternatives were not identified because MSP430 pin compatibility, peripheral mapping, and software behavior are highly device-specific.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MSP430F5338IPZR MSP430F6436IPZR
Package 100-LQFP (14 x 14 mm) 100-LQFP (14 x 14 mm) 100-LQFP (14 x 14 mm)
Brand Texas Instruments Texas Instruments Texas Instruments

মূল পার্থক্যসমূহ

  • Exact-ordering compatibility for existing MSP430F5338 designs (বনামMSP430F5338IPZR)
  • Integrated analog signal chain (বনামMSP430F6436IPZR)
  • Low-power mixed-signal integration (বনামMSP430F6436IPZR)

ডিজাইন নোট

Treat the ADC and DAC signals as precision analog nets even though they are integrated on the MCU. Route analog inputs away from switching power nodes, high-current LED drivers, and digital clock nets, and use the manufacturer pin-description table to select the device pins and reference connections. Place analog bypass and filtering components close to their associated pins, and keep return paths within the board's ground-planning scheme to reduce conversion noise.

The MSP430F5338IPZ supports 2.5 V and 3.3 V operation, so the power architecture should match the selected rail rather than assuming a universal 3.3 V supply. Follow the manufacturer datasheet for recommended supply decoupling and pin connections. Because the MCU includes analog conversion, DAC, and digital interfaces, place the required bypass capacitors at the pins and avoid sharing long supply traces between the analog and high-current sections of the board.

Do not treat an MSP430F6436IPZR as an automatic firmware-compatible substitution merely because the package matches. Compare the memory map, interrupt vector table, port assignments, analog peripheral channels, timer resources, and serial interface pins before replacing the MSP430F5338IPZ. Rebuild and retest the affected firmware, and verify ADC calibration, DAC output range, and low-power wake-up behavior on the revised design.

For mixed-signal acquisition, use DMA to transfer ADC results and avoid timing-sensitive data movement through interrupt service routines. Take advantage of the dedicated SPI and I2C peripherals for external sensors rather than bit-banged interfaces, which frees the 20 MHz CPU for filtering and control work. Keep the ADC reference and analog input routing quiet, and sample unused analog pins according to the device recommendations to minimize coupling.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Yes
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The component is identified as RoHS-compliant and lead-free. Reach, halogen-free, conflict-minerals, and automotive qualification status are not confirmed for this exact order code.

ডেটা যাচাই করা হয়েছে: 2026-11-15 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MSP430F5338IPZ datasheet MSP430F5338IPZ pinout MSP430F5338IPZ datasheet pdf MSP430F5338IPZ specifications MSP430F5338IPZ equivalent MSP430F5338IPZ replacement MSP430F5338IPZ price MSP430F5338IPZ stock Texas Instruments MSP430F5338IPZ MSP430F5338 100 LQFP pinout MSP430F5338IPZ vs MSP430F6436IPZR MSP430F5338 12-bit ADC DAC MSP430F5338IPZ battery powered measurement MSP430F5338IPZ 256KB flash 18KB SRAM

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MSP430F5338IPZ MSP430F5338IPZR MSP430F6436IPZR MSP430 MSP430F5xx mixed-signal microcontroller 16-bit RISC CPU embedded microcontroller semiconductor 256 KB Flash 18 KB SRAM 12-bit ADC 12-bit DAC DMA controller UART SPI I2C 100-LQFP package LQFP package family surface mount low-power operating modes portable measurement industrial sensor RoHS
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন