MSP430F5338IPZ - 20 MHz Mixed-Signal MCU | Texas Instruments
MPN: MSP430F5338IPZ ✓ פעילMSP430F5338IPZ סקירה
An MSP430 mixed-signal microcontroller combines a 16-bit RISC processing core, 16-bit registers, constant generators, and low-power operating modes with on-chip analog and communication peripherals. The MSP430 architecture is designed around efficient instruction execution and deterministic peripheral handling, helping embedded systems balance measurement accuracy, response time, and battery consumption.
Key features include 256 KB of Flash for firmware storage, 18 KB of SRAM for working data, a 12-bit ADC for analog-to-digital conversion, and a 12-bit DAC for programmable analog output. The integrated DMA controller supports efficient data movement between peripherals and memory, while UART, SPI, and I2C interfaces provide connectivity for sensors, transceivers, external memory, and industrial peripherals. The MSP430F5338IPZ is supplied in a 100-LQFP 14 x 14 mm package.
The 20 MHz CPU clock provides deterministic mixed-signal processing capability for measurement loops, signal conditioning workflows, and control algorithms. Five low-power operating modes are highlighted for portable measurement applications where duty-cycled sampling can reduce energy use between measurements. The integrated analog front end also reduces the need for discrete converters in instrumentation designs.
Typical applications include portable energy meters, industrial process sensors, data loggers, battery-powered measurement instruments, environmental monitoring systems, and low-power industrial controllers. The ADC, DAC, comparators, and multiple serial interfaces make the MCU suitable for designs that acquire analog quantities and communicate results to a host processor or external network interface.
When laying out a board, route analog inputs and DAC outputs away from high-current switching nodes, provide stable bypass capacitors at the supply pins, and follow the pin-description table in the manufacturer datasheet before assigning PCB tracks. This page combines the manufacturer product information, distributor listings, package details, drop-in alternatives, and design guidance to support component selection and board planning.
חלופות תחליף ישיר עבור MSP430F5338IPZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם MSP430F5338IPZ (אותו גורם צורה וטביעת רגל) — שונים ב ADC Resolution, CPU Architecture, Comparator, DAC Resolution, Flash Memory.
MSP430F5338IPZR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MSP430F6436IPZR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
MSP430F5338IPZ דירוגים מרביים ומאפיינים חשמליים
| CPU Architecture | 16-bit RISC MSP430 |
| Maximum CPU Frequency | 20 MHz |
| Flash Memory | 256 KB |
| SRAM | 18 KB |
| ADC Resolution | 12-bit |
| DAC Resolution | 12-bit |
| Comparator | Integrated comparator |
| DMA Controller | Integrated DMA |
| Serial Interfaces | UART, SPI, I2C |
| מתח אספקה | 2.5 V to 3.3 V |
| Low-Power Operating Modes | 5 low-power modes |
| Registers | 16-bit |
| מארז | 100-LQFP (14 x 14 mm) |
| סוג הרכבה | Surface Mount |
| סטטוס RoHS | RoHS-compliant |
| Lead-Free Status | Lead-free |
| מספר פינים | 100 pins |
מדריך תצורת פינים של MSP430F5338IPZ 100-lqfp (14 x 14 mm)
תצורת פינים עבור MSP430F5338IPZ (מארזת 100-lqfp (14 x 14 mm)). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור MSP430F5338IPZ.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
MSP430F5338IPZ מתאים עבור 6 יישוםs: Portable Energy Meter, Industrial Process Sensor, Battery-Powered Data Logger, Environmental Monitoring Node, Precision Analog Control System, Instrumentation and Test Equipment.
Portable Energy Meter
The MSP430F5338IPZ fits portable energy-meter designs because it combines a 20 MHz 16-bit MSP430 CPU with 256 KB of Flash and 18 KB of SRAM for measurement routines, calibration tables, and communication firmware. Its integrated 12-bit ADC acquires voltage or current-sensor signals without requiring a separate converter, while the 12-bit DAC can generate test or calibration stimuli. Five low-power operating modes support duty-cycled measurement. DMA can move conversion results without unnecessary CPU intervention, and UART or SPI can connect to a display or communications module.
מומלץ
Industrial Process Sensor
The MSP430F5338IPZ is appropriate for industrial process sensing where several analog inputs must be converted, filtered, and acted on by deterministic firmware. Its 12-bit ADC samples process signals, the comparator supports threshold detection, and the 100-pin LQFP package provides numerous general-purpose I/O pins for sensors and actuators. UART, SPI, and I2C interfaces allow connection to industrial transceivers, remote sensor nodes, or local displays. The 20 MHz CPU provides headroom for compensation loops and protocol handling without requiring a separate processor.
מומלץ
Battery-Powered Data Logger
The MSP430F5338IPZ supports battery-powered data logging by combining integrated analog conversion with five low-power operating modes and 18 KB of SRAM for measurement buffers. A 256 KB Flash region accommodates firmware, event records, and calibration coefficients, reducing the need for external storage in low-duty-cycle systems. The ADC can capture temperature, pressure, or light sensor outputs, while DMA transfers samples efficiently between memory and peripherals. SPI or I2C can connect to serial flash or a radio module for periodic data upload.
מומלץ
Environmental Monitoring Node
The MSP430F5338IPZ can serve as the control center of an environmental monitoring node that measures air quality, humidity, or light and reports results over a low-power serial link. Its integrated 12-bit ADC reduces system complexity when the selected sensors produce analog outputs, while the comparator can implement simple threshold events without continuous software polling. The 12-bit DAC supports sensor calibration or analog excitation. UART, SPI, and I2C make the device adaptable to different sensor boards, and the low-power modes suit remote, battery-operated deployments.
מומלץ
Precision Analog Control System
The MSP430F5338IPZ is suitable for closed-loop analog control systems that need both measurement and programmable output on one MCU. The 12-bit ADC closes the feedback loop, the 12-bit DAC generates the control voltage or offset, and the comparator can detect limits quickly. A 20 MHz CPU provides deterministic execution for control calculations, while DMA helps sustain sample timing. The 100-LQFP package offers enough I/O for external amplifiers, reference components, status indicators, and a service interface.
מומלץ
Instrumentation and Test Equipment
The MSP430F5338IPZ supports compact instrumentation platforms that combine signal acquisition, control, and communications in a single mixed-signal MCU. Its 12-bit ADC and DAC enable measurement and stimulus functions, while DMA handles transfers between the converter and memory. The 256 KB of Flash provides room for calibration tables, test sequences, and interface firmware. UART, SPI, and I2C simplify connection to displays, storage devices, and automated test controllers, making the device practical for portable measurement instruments.
מומלץ
נתוני עזר הנדסיים עבור MSP430F5338IPZ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | MSP430F5338IPZR | MSP430F6436IPZR |
|---|---|---|---|
| Package | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) | 100-LQFP (14 x 14 mm) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
מבדילים עיקריים
- Exact-ordering compatibility for existing MSP430F5338 designs (לעומתMSP430F5338IPZR)
- Integrated analog signal chain (לעומתMSP430F6436IPZR)
- Low-power mixed-signal integration (לעומתMSP430F6436IPZR)
הערות תכנון
Treat the ADC and DAC signals as precision analog nets even though they are integrated on the MCU. Route analog inputs away from switching power nodes, high-current LED drivers, and digital clock nets, and use the manufacturer pin-description table to select the device pins and reference connections. Place analog bypass and filtering components close to their associated pins, and keep return paths within the board's ground-planning scheme to reduce conversion noise.
The MSP430F5338IPZ supports 2.5 V and 3.3 V operation, so the power architecture should match the selected rail rather than assuming a universal 3.3 V supply. Follow the manufacturer datasheet for recommended supply decoupling and pin connections. Because the MCU includes analog conversion, DAC, and digital interfaces, place the required bypass capacitors at the pins and avoid sharing long supply traces between the analog and high-current sections of the board.
Do not treat an MSP430F6436IPZR as an automatic firmware-compatible substitution merely because the package matches. Compare the memory map, interrupt vector table, port assignments, analog peripheral channels, timer resources, and serial interface pins before replacing the MSP430F5338IPZ. Rebuild and retest the affected firmware, and verify ADC calibration, DAC output range, and low-power wake-up behavior on the revised design.
For mixed-signal acquisition, use DMA to transfer ADC results and avoid timing-sensitive data movement through interrupt service routines. Take advantage of the dedicated SPI and I2C peripherals for external sensors rather than bit-banged interfaces, which frees the 20 MHz CPU for filtering and control work. Keep the ADC reference and analog input routing quiet, and sample unused analog pins according to the device recommendations to minimize coupling.
מידע על תאימות
The component is identified as RoHS-compliant and lead-free. Reach, halogen-free, conflict-minerals, and automotive qualification status are not confirmed for this exact order code.