Texas Instruments

MSP430F6635IPZ - 20MHz Mixed-Signal MCU | Texas Instruments

MPN: MSP430F6635IPZ ✓ সক্রিয়
100-pin LQFP (PZ), 14 mm x 14 mm Package 20 MHz Speed 256 KB Flash (256K x 8) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

MSP430F6635IPZ সারাংশ

The Texas Instruments MSP430F6635IPZ is a 20 MHz mixed-signal microcontroller with 256 KB of Flash memory, 16 KB of SRAM, and a 12-bit ADC in a 100-pin LQFP package. It integrates USB, a 160-segment LCD controller, DMA, UART, SPI, I2C, and a comparator, making it suitable for connected industrial, measurement, and control systems.

A mixed-signal microcontroller is an embedded processing device that combines a digital microcontroller core with analog signal-conversion and comparison functions. The MSP430 belongs to the microcontroller hierarchy and uses a 16-bit RISC architecture to balance processing capability with low power consumption. Its integrated peripherals reduce external component count while supporting sensor acquisition, communications, display control, and programmable control loops.

The MSP430F6635IPZ operates at up to 20 MHz and includes 256 KB of Flash for firmware and data storage. Its 12-bit ADC supports analog measurement, while the comparator supports threshold detection and low-complexity control functions. Peripherals include DMA, UART, SPI, I2C, USB, and a 160-segment LCD controller. The industrial-temperature ordering option is specified for operation from -40°C to +85°C.

The MSP430 CPUXV2 architecture combines a 16-bit RISC core with extensive mixed-signal integration. DMA transfers data between memory and peripherals without requiring continuous CPU intervention for every transaction, which is useful in data-acquisition systems. The ADC and comparator provide a direct path for analog inputs, while serial interfaces and USB enable connection to sensors, displays, storage, and host systems.

Typical uses include industrial data loggers, precision measurement instruments, connected sensor hubs, low-power control panels, USB-enabled embedded nodes, and LCD-equipped human-interface devices. The combination of 20 MHz processing, 256 KB Flash, 16 KB SRAM, and integrated USB is particularly useful when the design must collect analog measurements and transfer them without requiring several discrete interface devices.

PCB design should preserve short analog and digital return paths, place decoupling capacitors close to the supply pins, and route sensitive analog inputs away from high-speed USB and serial signals. The 100-pin LQFP package requires adequate solderable perimeter length for reliable assembly and inspection. Firmware should also configure unused pins and analog resources explicitly rather than leaving peripheral states undefined.

This product summary combines the manufacturer specifications with practical guidance for package integration, mixed-signal layout, and peripheral planning. It also identifies nearby MSP430 family choices for engineers evaluating equivalent 100-pin mixed-signal controller designs while preserving a path to firmware and board-level compatibility review.

এর জন্য ড্রপ-ইন বিকল্প MSP430F6635IPZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible MSP430F6635IPZ (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, CPU Architecture, USB Interface, ADC Resolution, Comparator.

Texas Instruments
Package: 100-LQFP (14 x 14 mm)
CPU Architecture: MSP430 CPUXV2 16-bit RISC
USB Interface: Integrated USB
এর সাথে তুলনা করুন MSP430F6635IPZ →
Texas Instruments
Package: 100-pin LQFP (PZ), 14 x 14 mm
ADC Resolution: 12 bits
এর সাথে তুলনা করুন MSP430F6635IPZ →
Texas Instruments
Package: 100-LQFP (14 x 14 mm)
CPU Architecture: 16-bit MSP430 RISC
USB Interface: USB 2.0
এর সাথে তুলনা করুন MSP430F6635IPZ →

MSP430F6634IPZ

✅ ড্রপ-ইন
📦 100-LQFP (PZ)
Same 100-pin PZ package family; device-specific peripheral and memory resources differ, requiring pin and firmware validation

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MSP430F6636IPZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 100-LQFP (PZ)
16-bit MSP430 RISC · 20 MHz · 128 KB · 16 KB · 12 bit · 12 bit · Integrated · Integrated

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MSP430F6637IPZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 100-LQFP (PZ)
Same 100-pin PZ family, but flash, memory, and peripheral configuration may differ from MSP430F6635IPZ

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MSP430F5638IPZ

✅ ড্রপ-ইন
Texas Instruments
📦 100-LQFP (PZ)
Texas Instruments · 16-bit mixed-signal microcontroller · MSP430 CPUXV2 16-bit RISC · 20 MHz · 256 KB Flash (256K x 8) · 16 KB · 12 bit · 12 bit

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MSP430F6633IPZ

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 100-LQFP (PZ)
16-bit mixed-signal microcontroller · MSP430 CPUXV2 · 20 MHz · 128 KB · 128K x 8 bits · 16 KB · 12 bits · Integrated

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MSP430F6635IPZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

CPU Architecture 16-bit RISC (MSP430 CPUXV2)
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 20 MHz
Program Memory 256 KB Flash (256K x 8)
RAM Memory 16 KB
ADC Resolution 12 bit
Number of I/O 74
LCD Segment Capacity 160 segments
DMA Support Yes
Comparator Yes
UART Interface Yes
SPI Interface Yes
I2C Interface Yes
USB Interface Yes
অপারেটিং তাপমাত্রা -40°C to +85°C
প্যাকেজ 100-pin LQFP (PZ), 14 mm x 14 mm
মাউন্টিং টাইপ Surface mount
Internal Oscillator Yes
Packaging Tray

MSP430F6635IPZ 100-pin lqfp (pz), 14 mm x 14 mm পিন কনফিগারেশন গাইড

MSP430F6635IPZ (100-pin lqfp (pz), 14 mm x 14 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

MSP430F6635IPZ-এর জন্য 100-pin lqfp (pz), 14 mm x 14 mm প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি MSP430F6635IPZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

MSP430F6635IPZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial USB Data Logger, Precision Analog Measurement Instrument, Connected Sensor Hub, LCD-Equipped Control Panel, Low-Power Condition Monitoring, Communications Gateway.

🏭

Industrial USB Data Logger

The MSP430F6635IPZ fits a USB-connected data logger because it combines 256 KB of Flash, 16 KB of SRAM, a 12-bit ADC, DMA, and USB in one 100-pin LQFP device. The ADC can acquire sensor inputs while DMA moves captured data without excessive processor intervention, and Flash can retain configuration, calibration records, and event logs. USB provides a direct host connection for configuration and data transfer. A practical design should include analog input filtering, input-range protection, ESD protection for USB, and local decoupling close to the supply pins. Firmware should implement continuous logging, timestamp management, data-integrity checks, and safe USB enumeration without exceeding the device's memory budget.

🔧

Precision Analog Measurement Instrument

The MSP430F6635IPZ suits precision measurement instruments because its 12-bit ADC, comparator, 20 MHz processor, and 256 KB Flash support sampling, threshold detection, calibration, and local control in one package. The comparator can handle fast threshold events while the ADC supports proportional measurements, and DMA provides efficient sample movement. With 16 KB of SRAM, the controller can maintain working buffers and communication state without an external memory device. The analog section should use defined grounding, input conditioning, and calibration paths, while software must account for input settling and noise. Using the LCD controller for a local display can further reduce external controller demand while preserving a compact operator interface.

🧩

Connected Sensor Hub

The MSP430F6635IPZ can act as the central controller in a connected sensor hub because it combines a 12-bit ADC, comparator, DMA, UART, SPI, and I2C with 256 KB of Flash. SPI or I2C can connect digital sensors and memory devices, while UART supports an external radio or service interface. DMA allows sampled data to move between peripherals and memory with less CPU overhead than interrupt-driven transfers, improving responsiveness in multi-sensor systems. The 20 MHz clock rate supports protocol handling and local calculations, while the 16 KB SRAM accommodates buffers and a network stack. Power design should separate noisy digital activity from sensitive analog sections, and the bus layout should include pull-up or termination components where required by the selected protocol.

📺

LCD-Equipped Control Panel

The MSP430F6635IPZ is appropriate for an LCD-equipped operator panel because its integrated controller supports 160 segments and the device retains 74 I/O positions alongside UART, SPI, and I2C interfaces. The MCU can display equipment status, process values, diagnostics, and user prompts while handling keypad or external control inputs. Its 256 KB Flash and 16 KB SRAM are sufficient for firmware, local configuration, graphics data, and communication buffers in many compact panels. The LQFP footprint simplifies access to general-purpose I/O compared with a very small package, although 100 pins still require careful routing. Designers should follow the datasheet LCD pin guidance, include the required segment drive and bias components, and reserve the USB or serial interface for configuration and service traffic.

⚡

Low-Power Condition Monitoring

The MSP430F6635IPZ supports low-power condition-monitoring systems by combining an MSP430 mixed-signal controller, 12-bit ADC, comparator, and flexible serial interfaces. A monitor can sample vibration, temperature, voltage, or level signals, compare them against thresholds, and retain only important events in Flash. The comparator supports fast transitions, while DMA provides efficient handling of periodic samples. The 20 MHz maximum clock allows the device to process data during active periods and then return to a low-power state between measurements, although the exact duty cycle and wake sources must be configured in firmware. Board-level design should minimize leakage around the analog input, provide stable references, and separate sensor wiring from USB and switching-supply nodes.

🌐

Communications Gateway

The MSP430F6635IPZ can serve as a compact protocol-conversion gateway because it provides UART, SPI, I2C, USB, and DMA alongside a 20 MHz 16-bit processor. A gateway can receive data through one interface, validate and transform it, and transmit it through another while local Flash preserves configuration and firmware. The 256 KB program area and 16 KB SRAM support protocol state machines, buffers, diagnostics, and update metadata. USB is useful for configuration or host connectivity, while UART and I2C suit embedded links to sensors and downstream controllers. Practical implementation requires precise baud-rate and timing configuration, ESD protection on external lines, careful bus termination, and firmware flow control to prevent overrun during simultaneous traffic.

What is the operating voltage of MSP430F6635IPZ?
The MSP430F6635IPZ is designed for low-voltage operation, with the manufacturer product information identifying a 3.6 V low-supply range. Exact minimum and maximum voltage limits should be confirmed against the MSP430F663x manufacturer datasheet before final power-supply and brownout design. The device integrates USB, so its USB transceiver operating requirements must also be considered when selecting the system regulator.
What are the key specifications of MSP430F6635IPZ that engineers should know?
The MSP430F6635IPZ combines a 20 MHz 16-bit RISC core, 256 KB Flash, 16 KB SRAM, and a 12-bit ADC in a 100-pin LQFP package. It also integrates DMA, a comparator, USB, UART, SPI, I2C, and a 160-segment LCD controller. According to the Texas Instruments product page and part-details listing, these resources support mixed-signal measurement, communications, display control, and low-power embedded processing.
Where can I download the MSP430F6635IPZ datasheet PDF?
The official MSP430F6635 product page provides access to the MSP430F663x Mixed-Signal Microcontrollers datasheet and related documentation. Open the Texas Instruments MSP430F6635 page and select the datasheet link in the technical documents section. The associated part-details page identifies the document revision as Rev. G. Use the pin-description and electrical-characteristics tables from that document when assigning signals and designing the power supply.
Where can I find the MSP430F6635IPZ pinout and package details?
The MSP430F6635IPZ uses a 100-pin LQFP package identified by TI as PZ, and the manufacturer part-details listing specifies a 14 mm x 14 mm body. Use the pin-description table and package drawing in the MSP430F663x manufacturer datasheet to map all 100 positions. Do not rely on a generic 100-pin symbol alone because multiplexed peripheral and power functions must follow the device-specific mapping.
What can replace MSP430F6635IPZ on the same PCB?
A true drop-in replacement should use the same 100-pin PZ footprint and preserve pin-to-pin signal assignments, supply limits, clock behavior, and peripheral functions. MSP430F6634IPZ is the closest same-package family candidate identified for comparison, but it is not automatically a functional substitute because device-specific peripheral resources and memory organization must be checked. The manufacturer datasheet and firmware pin-mapping tables should be reviewed before releasing any replacement.
Is MSP430F6634IPZ the same as MSP430F6635IPZ?
No. The MSP430F6634IPZ and MSP430F6635IPZ belong to the same MSP430F6xx mixed-signal family and can appear in similar 100-pin package comparisons, but they are not necessarily identical in memory, USB, LCD, analog, or peripheral assignments. According to the Texas Instruments MSP430F663x datasheet, device selection depends on the exact resources enabled for each suffix. Treat the MSP430F6634IPZ as a candidate requiring pin and firmware validation, not an automatic substitution.
MSP430F6635IPZ vs MSP430F5638IPZ - which is better for a mixed-signal application?
The MSP430F6635IPZ is the stronger choice when the design specifically requires its 256 KB Flash, 16 KB SRAM, 20 MHz operation, USB, 160-segment LCD controller, 12-bit ADC, comparator, DMA, and integrated serial interfaces. The MSP430F5638IPZ may serve designs whose firmware and peripheral map fit that device, but substitution requires a complete comparison of memory, package pins, analog functions, communications, and operating limits. Use the two manufacturer datasheets rather than assuming software compatibility.
When should I choose MSP430F6635IPZ over MSP430F6634IPZ?
Choose the MSP430F6635IPZ when the product specification calls for the full MSP430F6635 resource set, particularly 256 KB Flash, 16 KB SRAM, USB, and the 160-segment LCD controller. Select the MSP430F6634IPZ only after confirming that its available memory and peripherals satisfy the design and that every PCB signal retains a compatible function. This choice should be based on the exact MSP430F663x device tables because family membership alone does not guarantee register or pin compatibility.
Is MSP430F6635IPZ suitable for a USB-connected industrial logger?
Yes, the MSP430F6635IPZ is suitable for a USB-connected industrial logger because it integrates a 20 MHz microcontroller, 256 KB Flash, 16 KB SRAM, a 12-bit ADC, DMA, USB, and UART, SPI, and I2C interfaces. Its -40°C to +85°C industrial temperature range supports industrial equipment. The implementation must still address USB signal integrity, supply sequencing, analog input conditioning, and data-storage endurance.
How much Flash and SRAM does MSP430F6635IPZ provide?
The MSP430F6635IPZ provides 256 KB of Flash, organized as 256K x 8, and 16 KB of SRAM according to the Texas Instruments product page. The Flash space holds firmware, constants, and nonvolatile data, while SRAM provides working memory for stack operations, buffers, peripheral data, and application state. A separate distributor specification page reports 18K x 8 RAM, so engineers should use the manufacturer MSP430F663x documentation as the controlling specification for the exact device.
What peripherals are integrated into MSP430F6635IPZ?
The MSP430F6635IPZ integrates a 12-bit ADC, comparator, DMA controller, USB interface, UART, SPI, I2C interface, and a controller for up to 160 LCD segments. The Texas Instruments product description identifies all of these functions, while the part-details listing identifies 74 I/O positions and a 100-pin package. This integration allows a compact design to combine analog measurement with multiple communication paths and segmented-display control.
What is the lead time for MSP430F6635IPZ?
The current lead time for MSP430F6635IPZ should be requested through the Request a Quote form on this page. Manufacturer and distributor inventory can change independently, so a stock statement should not be treated as a production forecast. For new builds, request the current factory lead time, minimum order quantity, tray packaging quantity, and date code conditions in the same quote response.
Is MSP430F6635IPZ in stock?
Use the Request a Quote form on this page to request current MSP430F6635IPZ inventory, lead time, minimum order quantity, and date-code information for the required quantity. The device is listed in a 100-pin PZ tray package, which should be confirmed with each production order. Procurement should also request lot traceability and any change notifications needed for the finished assembly.
Where can I buy MSP430F6635IPZ online?
The Request a Quote form on this page is the purchasing route for MSP430F6635IPZ, including production quantities, tray packaging, current availability, and lead time. Provide the required quantity, target date, and approved-source requirements with the request. Because the MSP430F6635IPZ is a specific 100-pin PZ ordering configuration, confirm that the quoted line item carries the exact suffix and tray packaging.
What is the price of MSP430F6635IPZ?
Use the Request a Quote form on this page for the current MSP430F6635IPZ quotation, including volume, packaging, delivery, and traceability requirements. Pricing depends on quantity, current factory and channel conditions, and the exact order configuration. The part is the tray-packaged 100-pin PZ variant, so quotes for reel or other suffix configurations should not be accepted as substitutes for production planning.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা MSP430F6635IPZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the MSP430F6635IPZ when a design needs the complete 20 MHz MSP430F6635 feature set: 256 KB Flash, 16 KB SRAM, a 12-bit ADC, comparator, DMA, USB, UART, SPI, I2C, and a 160-segment LCD controller. Its 100-pin industrial-temperature LQFP package is appropriate for boards needing ample I/O and a straightforward manufacturing footprint. Consider the MSP430F6634IPZ only when the reduced or differently assigned device resources satisfy the product and the exact pin table has been checked. Use the MSP430F5638IPZ when its related mixed-signal configuration fits the design, but validate USB, LCD, memory, and peripheral mappings rather than assuming register-level equivalence. MSP430F6633IPZ, MSP430F6636IPZ, and MSP430F6637IPZ remain family alternatives requiring individual datasheet and firmware review. For any substitution, include supply limits, analog performance, boot behavior, peripheral pin multiplexing, interrupt configuration, and existing code compatibility in the approval checklist.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য MSP430F6634IPZ MSP430F6636IPZ MSP430F6637IPZ MSP430F5638IPZ MSP430F6633IPZ
Package 100-LQFP (PZ), 14 mm x 14 mm 100-LQFP (PZ) 100-LQFP (PZ) 100-LQFP (PZ) 100-LQFP 100-LQFP (PZ)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments

মূল পার্থক্যসমূহ

  • Integration of USB and a 160-segment LCD controller (বনামMSP430F5638IPZ)
  • Complete 256 KB Flash and 16 KB SRAM resource set (বনামMSP430F6634IPZ)
  • 12-bit ADC and comparator integration for mixed-signal designs (বনামMSP430F6633IPZ)
  • Industrial-temperature ordering configuration (বনামMSP430F6636IPZ)

ডিজাইন নোট

Place the required supply bypass capacitors immediately adjacent to the MSP430F6635IPZ supply and ground pins, and keep their current paths short. Separate analog and digital return currents where possible to reduce ADC noise coupling. Treat USB and other high-speed signals as controlled-impedance routes if board fabrication permits, and avoid routing them beneath sensitive analog inputs.

The 12-bit ADC still requires careful analog design because connector leakage, reference variation, source impedance, and digital switching can dominate measurement accuracy. Use a defined reference, low-leakage protection components, suitable source impedance, and an acquisition strategy that allows the selected ADC channel to settle. Calibrate offset and gain over the intended temperature range rather than relying only on nominal conversion resolution.

Do not assume that two MSP430F6xx devices with the same 100-pin package are automatically interchangeable. Compare the exact pin-description table, power pins, analog channels, USB connections, LCD outputs, serial mappings, clock options, memory limits, and device-specific register configuration. After substitution, rebuild the project for the new target, verify startup and interrupt vectors, and test all peripheral interfaces rather than relying only on the physical footprint.

The 3.6 V low-supply classification makes supply tolerance and USB transceiver requirements central to the power architecture. Confirm the exact operating-voltage limits and USB current budget in the MSP430F663x manufacturer datasheet. Provide local decoupling, control USB bus-power current, and avoid placing analog reference or sensor supplies on the same unfiltered rail segment.

The 100-pin LQFP provides a substantial solderable footprint and can distribute heat better than a small leadless package, but actual junction temperature depends on clock activity, supply voltage, GPIO loading, ambient temperature, and board copper. Use the manufacturer power-dissipation data for operating conditions and provide uninterrupted ground-plane areas under the device where the package design permits.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The industrial-temperature designation is confirmed, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is included in the technical information.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

MSP430F6635IPZ datasheet MSP430F6635IPZ pinout MSP430F6635IPZ datasheet pdf Texas Instruments MSP430F6635IPZ MSP430F6635IPZ equivalent MSP430F6635IPZ replacement MSP430F6635IPZ cross reference MSP430F6635IPZ vs MSP430F6634IPZ MSP430F6635IPZ vs MSP430F5638IPZ MSP430F6635IPZ LQFP-100 footprint MSP430F6635IPZ USB ADC application MSP430F6635IPZ price MSP430F6635IPZ stock MSP430F6635IPZ 20MHz 256KB MSP430F6635IPZ reference design

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments MSP430F6635IPZ MSP430F6634IPZ MSP430F6636IPZ MSP430F6637IPZ MSP430F5638IPZ MSP430F6633IPZ MSP430 CPUXV2 mixed-signal microcontroller RISC architecture 16-bit microcontroller 12-bit ADC comparator DMA controller USB interface UART SPI I2C 160-segment LCD controller Flash memory SRAM LQFP-100 PZ package surface-mount package industrial temperature grade
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন