MSP430F6635IPZ - 20MHz Mixed-Signal MCU | Texas Instruments
MPN: MSP430F6635IPZ ✓ Hoạt độngMSP430F6635IPZ Tóm tắt
A mixed-signal microcontroller is an embedded processing device that combines a digital microcontroller core with analog signal-conversion and comparison functions. The MSP430 belongs to the microcontroller hierarchy and uses a 16-bit RISC architecture to balance processing capability with low power consumption. Its integrated peripherals reduce external component count while supporting sensor acquisition, communications, display control, and programmable control loops.
The MSP430F6635IPZ operates at up to 20 MHz and includes 256 KB of Flash for firmware and data storage. Its 12-bit ADC supports analog measurement, while the comparator supports threshold detection and low-complexity control functions. Peripherals include DMA, UART, SPI, I2C, USB, and a 160-segment LCD controller. The industrial-temperature ordering option is specified for operation from -40°C to +85°C.
The MSP430 CPUXV2 architecture combines a 16-bit RISC core with extensive mixed-signal integration. DMA transfers data between memory and peripherals without requiring continuous CPU intervention for every transaction, which is useful in data-acquisition systems. The ADC and comparator provide a direct path for analog inputs, while serial interfaces and USB enable connection to sensors, displays, storage, and host systems.
Typical uses include industrial data loggers, precision measurement instruments, connected sensor hubs, low-power control panels, USB-enabled embedded nodes, and LCD-equipped human-interface devices. The combination of 20 MHz processing, 256 KB Flash, 16 KB SRAM, and integrated USB is particularly useful when the design must collect analog measurements and transfer them without requiring several discrete interface devices.
PCB design should preserve short analog and digital return paths, place decoupling capacitors close to the supply pins, and route sensitive analog inputs away from high-speed USB and serial signals. The 100-pin LQFP package requires adequate solderable perimeter length for reliable assembly and inspection. Firmware should also configure unused pins and analog resources explicitly rather than leaving peripheral states undefined.
This product summary combines the manufacturer specifications with practical guidance for package integration, mixed-signal layout, and peripheral planning. It also identifies nearby MSP430 family choices for engineers evaluating equivalent 100-pin mixed-signal controller designs while preserving a path to firmware and board-level compatibility review.
Bộ thay thế dễ dàng lắp đặt cho MSP430F6635IPZ — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với MSP430F6635IPZ (cùng hình factor và footprint) — khác nhau ở Package, CPU Architecture, USB Interface, ADC Resolution, Comparator.
MSP430F6634IPZ
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
MSP430F6636IPZ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MSP430F6637IPZ
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
MSP430F5638IPZ
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →MSP430F6633IPZ
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →MSP430F6635IPZ Tỷ lệ tối đa & tính chất điện
| CPU Architecture | 16-bit RISC (MSP430 CPUXV2) |
| Tần số xung maksimum | 20 MHz |
| Program Memory | 256 KB Flash (256K x 8) |
| RAM Memory | 16 KB |
| ADC Resolution | 12 bit |
| Number of I/O | 74 |
| LCD Segment Capacity | 160 segments |
| DMA Support | Yes |
| Comparator | Yes |
| UART Interface | Yes |
| SPI Interface | Yes |
| I2C Interface | Yes |
| USB Interface | Yes |
| Nhiệt độ hoạt động | -40°C to +85°C |
| Hộp | 100-pin LQFP (PZ), 14 mm x 14 mm |
| Kiểu lắp đặt | Surface mount |
| Internal Oscillator | Yes |
| Packaging | Tray |
Hướng dẫn cấu hình chân MSP430F6635IPZ 100-pin lqfp (pz), 14 mm x 14 mm
Cấu hình chân cho MSP430F6635IPZ (100-pin lqfp (pz), 14 mm x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho MSP430F6635IPZ.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
MSP430F6635IPZ phù hợp cho 6 Áp dụngs: Industrial USB Data Logger, Precision Analog Measurement Instrument, Connected Sensor Hub, LCD-Equipped Control Panel, Low-Power Condition Monitoring, Communications Gateway.
Industrial USB Data Logger
The MSP430F6635IPZ fits a USB-connected data logger because it combines 256 KB of Flash, 16 KB of SRAM, a 12-bit ADC, DMA, and USB in one 100-pin LQFP device. The ADC can acquire sensor inputs while DMA moves captured data without excessive processor intervention, and Flash can retain configuration, calibration records, and event logs. USB provides a direct host connection for configuration and data transfer. A practical design should include analog input filtering, input-range protection, ESD protection for USB, and local decoupling close to the supply pins. Firmware should implement continuous logging, timestamp management, data-integrity checks, and safe USB enumeration without exceeding the device's memory budget.
Được đề xuất
Precision Analog Measurement Instrument
The MSP430F6635IPZ suits precision measurement instruments because its 12-bit ADC, comparator, 20 MHz processor, and 256 KB Flash support sampling, threshold detection, calibration, and local control in one package. The comparator can handle fast threshold events while the ADC supports proportional measurements, and DMA provides efficient sample movement. With 16 KB of SRAM, the controller can maintain working buffers and communication state without an external memory device. The analog section should use defined grounding, input conditioning, and calibration paths, while software must account for input settling and noise. Using the LCD controller for a local display can further reduce external controller demand while preserving a compact operator interface.
Được đề xuất
Connected Sensor Hub
The MSP430F6635IPZ can act as the central controller in a connected sensor hub because it combines a 12-bit ADC, comparator, DMA, UART, SPI, and I2C with 256 KB of Flash. SPI or I2C can connect digital sensors and memory devices, while UART supports an external radio or service interface. DMA allows sampled data to move between peripherals and memory with less CPU overhead than interrupt-driven transfers, improving responsiveness in multi-sensor systems. The 20 MHz clock rate supports protocol handling and local calculations, while the 16 KB SRAM accommodates buffers and a network stack. Power design should separate noisy digital activity from sensitive analog sections, and the bus layout should include pull-up or termination components where required by the selected protocol.
Được đề xuất
LCD-Equipped Control Panel
The MSP430F6635IPZ is appropriate for an LCD-equipped operator panel because its integrated controller supports 160 segments and the device retains 74 I/O positions alongside UART, SPI, and I2C interfaces. The MCU can display equipment status, process values, diagnostics, and user prompts while handling keypad or external control inputs. Its 256 KB Flash and 16 KB SRAM are sufficient for firmware, local configuration, graphics data, and communication buffers in many compact panels. The LQFP footprint simplifies access to general-purpose I/O compared with a very small package, although 100 pins still require careful routing. Designers should follow the datasheet LCD pin guidance, include the required segment drive and bias components, and reserve the USB or serial interface for configuration and service traffic.
Được đề xuất
Low-Power Condition Monitoring
The MSP430F6635IPZ supports low-power condition-monitoring systems by combining an MSP430 mixed-signal controller, 12-bit ADC, comparator, and flexible serial interfaces. A monitor can sample vibration, temperature, voltage, or level signals, compare them against thresholds, and retain only important events in Flash. The comparator supports fast transitions, while DMA provides efficient handling of periodic samples. The 20 MHz maximum clock allows the device to process data during active periods and then return to a low-power state between measurements, although the exact duty cycle and wake sources must be configured in firmware. Board-level design should minimize leakage around the analog input, provide stable references, and separate sensor wiring from USB and switching-supply nodes.
Được đề xuất
Communications Gateway
The MSP430F6635IPZ can serve as a compact protocol-conversion gateway because it provides UART, SPI, I2C, USB, and DMA alongside a 20 MHz 16-bit processor. A gateway can receive data through one interface, validate and transform it, and transmit it through another while local Flash preserves configuration and firmware. The 256 KB program area and 16 KB SRAM support protocol state machines, buffers, diagnostics, and update metadata. USB is useful for configuration or host connectivity, while UART and I2C suit embedded links to sensors and downstream controllers. Practical implementation requires precise baud-rate and timing configuration, ESD protection on external lines, careful bus termination, and firmware flow control to prevent overrun during simultaneous traffic.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho MSP430F6635IPZ — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | MSP430F6634IPZ | MSP430F6636IPZ | MSP430F6637IPZ | MSP430F5638IPZ | MSP430F6633IPZ |
|---|---|---|---|---|---|---|
| Package | 100-LQFP (PZ), 14 mm x 14 mm | 100-LQFP (PZ) | 100-LQFP (PZ) | 100-LQFP (PZ) | 100-LQFP | 100-LQFP (PZ) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
Bảo phân biệt quan trọng
- Integration of USB and a 160-segment LCD controller (vsMSP430F5638IPZ)
- Complete 256 KB Flash and 16 KB SRAM resource set (vsMSP430F6634IPZ)
- 12-bit ADC and comparator integration for mixed-signal designs (vsMSP430F6633IPZ)
- Industrial-temperature ordering configuration (vsMSP430F6636IPZ)
Ghi chú thiết kế
Place the required supply bypass capacitors immediately adjacent to the MSP430F6635IPZ supply and ground pins, and keep their current paths short. Separate analog and digital return currents where possible to reduce ADC noise coupling. Treat USB and other high-speed signals as controlled-impedance routes if board fabrication permits, and avoid routing them beneath sensitive analog inputs.
The 12-bit ADC still requires careful analog design because connector leakage, reference variation, source impedance, and digital switching can dominate measurement accuracy. Use a defined reference, low-leakage protection components, suitable source impedance, and an acquisition strategy that allows the selected ADC channel to settle. Calibrate offset and gain over the intended temperature range rather than relying only on nominal conversion resolution.
Do not assume that two MSP430F6xx devices with the same 100-pin package are automatically interchangeable. Compare the exact pin-description table, power pins, analog channels, USB connections, LCD outputs, serial mappings, clock options, memory limits, and device-specific register configuration. After substitution, rebuild the project for the new target, verify startup and interrupt vectors, and test all peripheral interfaces rather than relying only on the physical footprint.
The 3.6 V low-supply classification makes supply tolerance and USB transceiver requirements central to the power architecture. Confirm the exact operating-voltage limits and USB current budget in the MSP430F663x manufacturer datasheet. Provide local decoupling, control USB bus-power current, and avoid placing analog reference or sensor supplies on the same unfiltered rail segment.
The 100-pin LQFP provides a substantial solderable footprint and can distribute heat better than a small leadless package, but actual junction temperature depends on clock activity, supply voltage, GPIO loading, ambient temperature, and board copper. Use the manufacturer power-dissipation data for operating conditions and provide uninterrupted ground-plane areas under the device where the package design permits.
Thông tin tuân thủ
The industrial-temperature designation is confirmed, but no explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification declaration is included in the technical information.