Texas Instruments

OPA228UA - 33 MHz Precision Op Amp | Texas Instruments

MPN: OPA228UA ✓ সক্রিয়
8-SOIC Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

OPA228UA সারাংশ

The Texas Instruments OPA228UA is a high-precision, low-noise operational amplifier optimized for closed-loop gains of 5 or greater, with a 33 MHz gain-bandwidth product, a 10 V/µs slew rate, and an 8-SOIC package. The amplifier combines precision DC performance with wide bandwidth for instrumentation, signal-conditioning, and industrial measurement systems.

An operational amplifier, or op amp, is an analog integrated circuit that amplifies the voltage difference between its inverting and non-inverting inputs while using negative feedback to establish gain and bandwidth. Within the broader power-management and signal-chain hierarchy, an op amp is a precision analog IC used for buffering, amplification, filtering, current sensing, instrumentation, and actuator control.

Key characteristics include a 33 MHz bandwidth and 10 V/µs slew rate, allowing the OPA228UA to support closed-loop gains of 5 or greater. Its precision-oriented architecture also makes it useful where DC offset, bias behavior, noise, and common-mode performance influence measurement accuracy. The device is available in the 8-SOIC package identified as OPA228UA by Texas Instruments.

The OPA228 belongs to a family of precision, low-noise operational amplifiers designed for both AC and DC applications. Unlike unity-gain-stable members of the related family, the OPA228 is optimized for gain settings of 5 or higher, helping preserve useful bandwidth in instrumentation chains. The wide bandwidth and high slew rate support faster settling in communications, test equipment, and sensor-interface circuits.

Typical applications include low-level sensor amplification, precision current measurement, active filters, data-conversion front ends, laboratory instrumentation, and industrial control loops. The device can be paired with external resistors for gain-setting or filtering and with external circuitry for offset and bias-current compensation when the application requires the highest precision.

Designers should check the closed-loop gain, output-voltage swing, common-mode range, supply voltage, capacitive-load stability, and noise-gain requirements before finalizing the circuit. Input and output routing should minimize parasitic capacitance and sensitive-input leakage, while power-supply bypassing should be placed close to the device. Stable operation near the gain limit requires reviewing the manufacturer’s stability and frequency-response guidance.

এর জন্য ড্রপ-ইন বিকল্প OPA228UA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

OPA228UB

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-SOIC
Same 33 MHz bandwidth and 10 V/µs slew rate; orderable temperature-grade details differ by 0 V/µs and 0 MHz across the electrical headline parameters

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

OPA228UC

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 8-SOIC
Same 33 MHz bandwidth and 10 V/µs slew rate; orderable temperature-grade details differ by 0 V/µs and 0 MHz across the electrical headline parameters

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

OP37UA

✅ ড্রপ-ইন
📦 8-SOIC
Industry-standard OP37-family pin arrangement; OPA228 provides 33 MHz bandwidth and 10 V/µs slew rate, while the OP37 headline bandwidth and slew rate differ

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

OP37UB

✅ ড্রপ-ইন
📦 8-SOIC
Industry-standard OP37-family pin arrangement; OPA228 provides 33 MHz bandwidth and 10 V/µs slew rate, while the OP37 headline bandwidth and slew rate differ

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

OP37UC

✅ ড্রপ-ইন
📦 8-SOIC
Industry-standard OP37-family pin arrangement; OPA228 provides 33 MHz bandwidth and 10 V/µs slew rate, while the OP37 headline bandwidth and slew rate differ

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

OPA228UA সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type High-precision operational amplifier
Amplifier Count 1 circuit
Gain-Bandwidth Product 33 MHz
Slew Rate 10 V/µs
Minimum Recommended Closed-Loop Gain 5
Noise Performance Low noise
DC Performance High precision
AC Performance Wide bandwidth
প্যাকেজ 8-SOIC
Package Width 3.90 mm
মাউন্টিং টাইপ Surface mount
পিনের সংখ্যা 8 pins

OPA228UA পিন কনফিগারেশন

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
পিন 1 OFFSET NULL — Offset-voltage null adjustment terminal
পিন 2 INVERTING INPUT — Inverting input terminal
পিন 3 NON-INVERTING INPUT — Non-inverting input terminal
পিন 4 V- — Negative supply terminal
পিন 5 OFFSET NULL — Offset-voltage null adjustment terminal
পিন 6 OUTPUT — Amplifier output terminal
পিন 7 V+ — Positive supply terminal
পিন 8 NC — Not connected

সাধারণ ব্যবহার

OPA228UA এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Precision Sensor Signal Conditioning, Data-Conversion Front End, Industrial Current Measurement, Active Analog Filters, Test and Measurement Equipment, Communications Receive Chain.

🏭

Precision Sensor Signal Conditioning

The OPA228UA fits low-level sensor front ends that require accurate DC amplification without sacrificing usable bandwidth. Its 33 MHz gain-bandwidth product and 10 V/µs slew rate support closed-loop gains of 5 or greater, while the family’s precision DC characteristics help reduce offset-related measurement error. The amplifier can condition strain-gauge, pressure, temperature, and bridge outputs before conversion or digitization. Because the device is optimized for gain above unity, the engineer should calculate the complete noise gain, confirm that the sensor source impedance remains compatible, and verify common-mode and output-swing limits. Placement close to the sensor reduces parasitic pickup and allows the low-noise signal path to remain compact.

📺

Data-Conversion Front End

The OPA228UA can provide the gain and drive immediately preceding an analog-to-digital converter when the converter requires a low-impedance input. A 33 MHz gain-bandwidth product and a 10 V/µs slew rate allow the amplifier to preserve the speed of the signal chain, while high-precision DC behavior helps reduce gain and offset error before conversion. This is especially useful for medium- to high-speed industrial acquisition systems. The amplifier should be configured for the required signal gain and noise gain, and the output must remain within the converter’s input range. Board-level evaluation should also account for settling time, converter acquisition time, clock coupling, and the need for suitable termination or filtering between the amplifier and ADC.

⚡

Industrial Current Measurement

OPA228UA is appropriate for precision current-measurement amplifiers built around a low-value shunt resistor. The device’s low-noise, high-precision positioning supports accurate amplification of small shunt voltages, while its 10 V/µs slew rate helps reproduce rapidly changing current waveforms. It can be used in power monitoring, motor-control feedback, laboratory instrumentation, and industrial process controls. The gain resistor network should be checked for source impedance, resistor tolerance, and thermal-coefficient effects because these can dominate the final accuracy. The amplifier’s common-mode range must include the shunt voltage, and the design must avoid driving the input stage beyond its permitted operating region. Kelvin connections and guarded PCB routing improve practical measurement performance.

🌐

Active Analog Filters

The OPA228UA can serve as the gain element in active low-pass, band-pass, and notch-filter circuits where both precision and bandwidth matter. Its 33 MHz gain-bandwidth product supports higher-frequency filter sections than a purely precision, narrow-band amplifier, while the 10 V/µs slew rate improves large-signal behavior. This makes it useful in sensor-filtering, communications receive chains, audio measurement, and laboratory signal conditioning. Component selection must account for the closed-loop gain and noise gain rather than signal gain alone. The practical limit on high-Q or high-order filters often comes from resistor and capacitor tolerances, parasitic capacitance, and the amplifier’s output-current capability. Prototype the filter and verify gain, phase, and stability across the intended frequency and output-amplitude range.

🖥️

Test and Measurement Equipment

OPA228UA suits precision laboratory and production-test instruments that combine low-level DC measurements with modest AC bandwidth requirements. Its high-precision DC characteristics support accurate buffer and gain stages, while the 33 MHz bandwidth and 10 V/µs slew rate allow the amplifier to handle faster test signals than a conventional precision op amp optimized mainly for low frequency. Potential uses include source monitoring, programmable supplies, automated fixture interfaces, and general-purpose measurement front ends. The circuit should include adequate input and output range checks and should avoid excessive capacitive loading at the output. For sensitive instruments, guard shields and clean grounding can reduce leakage and ground-potential errors. The manufacturer’s bias-current compensation and offset-adjustment guidance should be followed where maximum DC accuracy is required.

🌐

Communications Receive Chain

OPA228UA can amplify small signals in communications and networking equipment when the receiver requires precise DC behavior and higher bandwidth than a conventional slow precision amplifier. Its 33 MHz gain-bandwidth product and 10 V/µs slew rate support closed-loop gains of 5 or greater, making it appropriate for intermediate-frequency and baseband conditioning stages. The device can help maintain signal amplitude and phase performance when the required gain is moderate and the operating frequency is well below the amplifier’s bandwidth. RF-adjacent circuits still require careful impedance matching, filtering, and shielding. Validate the complete gain, isolation, and distortion requirements rather than evaluating only the small-signal bandwidth. In a production design, compare the receive-chain gain, noise figure, and linearity with the complete signal path.

What are the key specifications of OPA228UA that engineers should know?
The OPA228UA is a single-channel, high-precision operational amplifier with a 33 MHz gain-bandwidth product, a 10 V/µs slew rate, and an 8-SOIC package. According to the Texas Instruments OPA228 product information, the OPA228 family is optimized for closed-loop gains of 5 or greater and combines low-noise AC performance with precision DC behavior. These characteristics make it appropriate for instrumentation, sensor interfaces, filters, and data-conversion front ends.
What is the operating voltage of OPA228UA?
The OPA228UA supply-voltage limits must be confirmed in the manufacturer datasheet before circuit design. The Texas Instruments product page identifies OPA228 as a high-precision, low-noise amplifier, but the accessible product information does not state the exact minimum and maximum supply voltages for this orderable part. Consult the OPA228 electrical-characteristics table and the pin-description table before selecting bypass capacitors or designing for shutdown behavior.
Why is the OPA228 optimized for gains of 5 or greater?
The OPA228 is optimized for closed-loop gains of 5 or greater because that operating region supports its higher-speed 33 MHz bandwidth and 10 V/µs slew-rate characteristics. According to Texas Instruments, related OPA227 devices are unity-gain stable, while the OPA228 favors higher closed-loop gains. Gain-noise feedback must therefore be checked carefully; an incorrect noise gain can move the loop outside its intended stable operating region.
Where can I download the OPA228UA datasheet PDF?
The official OPA228UA datasheet can be obtained through the Texas Instruments OPA228 product page at https://www.ti.com/product/OPA228. The part-details page for OPA228UA is https://www.ti.com/product/OPA228/part-details/OPA228UA. Use the electrical-characteristics, typical-performance, pin-configuration, and application sections to verify supply limits, input and output limits, stability, noise, and compensation requirements.
Where can I find the OPA228UA pinout?
The OPA228UA pin configuration is shown in the pin-configuration and pin-description tables of the Texas Instruments OPA228 datasheet. It is an 8-SOIC device with offset-null, inverting-input, non-inverting-input, negative-supply, offset-null, output, positive-supply, and no-connect positions when numbered counterclockwise from the marked pin 1. Use the manufacturer pin table when assigning PCB nets or checking socket orientation.
Is OPA228UA suitable for precision instrumentation?
Yes, the OPA228UA is suitable for precision instrumentation because the OPA228 family combines low-noise operation, wide bandwidth, and precision DC performance. Its 33 MHz gain-bandwidth product and 10 V/µs slew rate can preserve signal fidelity and settling performance in amplifier chains. The exact input-offset, bias-current, and noise-density limits should be checked against the system error budget before committing to a specific gain configuration.
OPA228UA vs OP37UA: which is better for a gain-of-10 signal chain?
The OPA228UA is generally the stronger choice for a gain-of-10 precision signal chain because it provides a 33 MHz gain-bandwidth product and a 10 V/µs slew rate while being optimized for gains of 5 or greater. The Texas Instruments OPA228 product information identifies the OPA228 family as pin-for-pin compatible with the industry-standard OP27 and OP37 families. Validate supply range, offset, bias current, common-mode range, and stability against the complete circuit requirements.
What is the difference between OPA228UA and OPA228UB?
OPA228UA and OPA228UB belong to the same Texas Instruments OPA228 family and use the same 8-SOIC electrical layout, but their orderable temperature or grade details can differ. The difference relevant to a replacement is the operating-temperature rating and associated qualification conditions. Compare the exact package drawing, supply range, electrical limits, and temperature grade in the manufacturer part details before treating either MPN as a production substitute.
When should I choose OPA228UA instead of a unity-gain-stable op amp?
Choose the OPA228UA when the signal path uses a closed-loop gain of 5 or greater and needs its 33 MHz bandwidth and 10 V/µs slew rate. A unity-gain-stable amplifier is generally preferable when the circuit must operate reliably at gain below 5 or uses a capacitive load requiring unity-gain stability. The selection should also account for common-mode range, output swing, supply voltage, noise, and offset requirements.
What can replace OPA228UA in an existing 8-SOIC design?
The closest documented drop-in candidates are precision single-channel amplifiers that use the same 8-SOIC pin arrangement and satisfy the original supply, gain, bandwidth, offset, and common-mode requirements. The OPA228 family is identified by Texas Instruments as pin-for-pin compatible with industry-standard OP27 and OP37 devices. Treat a replacement as qualified only after checking every electrical limit and the circuit’s noise-gain stability rather than relying on package shape alone.
Is OPA228UA the same as OP37UA?
No. The OPA228UA and OP37UA are related precision operational amplifiers rather than identical devices. Texas Instruments describes the OPA228 family as a pin-for-pin replacement for industry-standard OP27 and OP37 devices, while the OPA228 provides a 33 MHz gain-bandwidth product and a 10 V/µs slew rate and is optimized for closed-loop gains of 5 or greater. Verify operating limits before substitution.
Where to buy OPA228UA online?
Use the Request a Quote form on this page to request the OPA228UA, current lead time, quantity requirements, and intended shipping destination. The form provides a direct purchasing channel without relying on stale catalog records. Before ordering, confirm that the quoted device is the 8-SOIC OPA228UA and request any manufacturer traceability or date-code documentation required by your quality system.
What is the price of OPA228UA?
The current OPA228UA price should be obtained through the Request a Quote form on this page because commercial pricing can change with quantity, date code, inventory, and market conditions. Submit the required quantity and package configuration to receive a current quote. No fixed price should be carried into a design cost calculation without obtaining a fresh quotation for the exact orderable MPN.
What is the lead time and stock status for OPA228UA?
Current OPA228UA stock, lead time, and minimum order quantity should be confirmed through the Request a Quote form on this page. The manufacturer lists OPA228UA as an active part, but active status does not by itself guarantee immediate inventory for every quantity. Include your required delivery date and date-code requirements with the request so procurement can confirm an appropriate supply plan.
How should OPA228UA be decoupled and laid out?
Place the recommended supply-bypass capacitors close to the positive and negative supply pins, and keep the input and output traces short to minimize parasitic capacitance and leakage. Sensitive-input routing should avoid nearby switching nodes and high-impedance traces. Because the OPA228 is optimized for gains of 5 or greater, verify the actual noise gain and output-driving load against the manufacturer’s stability and typical-performance guidance.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা OPA228UA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the OPA228UA for precision signal chains that use a closed-loop gain of 5 or greater and benefit from a 33 MHz gain-bandwidth product and 10 V/µs slew rate. It is particularly suitable for sensor conditioning, current measurement, active filters, data-conversion interfaces, and test equipment where low-noise, precision DC performance, and useful bandwidth are required together. Select OPA228UB or OPA228UC when their specified temperature grade better matches the deployment while preserving the same electrical and package basis. Consider an OP37-family device only when its complete electrical limits satisfy the circuit and its lower or different speed characteristics are acceptable. A unity-gain-stable precision amplifier is the better choice when stable operation at gain below 5 is mandatory. In every case, verify supply voltage, common-mode range, output swing, offset, bias current, noise, capacitive-load behavior, and stability against the manufacturer datasheet.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য OPA228UB OPA228UC OP37UA OP37UB OP37UC
Brand Texas Instruments Texas Instruments Texas Instruments Analog Devices Analog Devices Analog Devices
Package 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC 8-SOIC
Amplifier Count 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit 1 circuit
Application Class General-purpose precision amplifier General-purpose precision amplifier General-purpose precision amplifier Precision operational amplifier Precision operational amplifier Precision operational amplifier

মূল পার্থক্যসমূহ

  • Higher nominal speed than the industry-standard replacement family (বনামOP37UA)
  • Designed for precision and bandwidth in the same amplifier (বনামOP37UB)
  • Same manufacturer family with temperature-grade ordering flexibility (বনামOPA228UB)

ডিজাইন নোট

The OPA228 is optimized for closed-loop gains of 5 or greater, so unity-gain operation should not be treated as interchangeable with a unity-gain-stable amplifier. Calculate both the signal gain and the noise gain, including feedback-network impedance and source impedance, before finalizing the circuit. In instrumentation designs, the feedback network must also be included in the noise analysis. If the required operating gain is below 5, select an amplifier explicitly designed for stable unity-gain operation rather than adding unnecessary compensation or reducing the feedback ratio.

Keep the non-inverting and inverting input routes short, isolate them from switching nodes, and avoid routing sensitive inputs beside high-impedance or high-voltage traces. Place supply-bypass capacitors close to pins 4 and 7 with a short return path to the device ground or supply-reference node. If offset trimming is used, connect the offset-null terminals through a clean potentiometer arrangement and keep the associated copper away from fast edges. Sensitive bridge or shunt measurements benefit from guarded layouts and a clean analog ground reference.

Treat the OPA228 as a high-speed precision amplifier even when the signal of interest is low frequency. Its 33 MHz gain-bandwidth product and 10 V/µs slew rate can excite parasitic capacitance through long PCB traces or connector leads. Terminate cables appropriately, add filtering only after accounting for the closed-loop gain, and validate phase margin using the complete source, feedback, and load network. For ADC front ends, check amplifier settling against the converter’s acquisition window and use the manufacturer’s output-capacitance guidance when driving long or capacitive loads.

Verify supply voltage, input common-mode range, output swing, and output-current capability under the actual load before enabling the amplifier. Estimated: if a 5 V supply drives a 3 V output at 10 mA, the amplifier’s quiescent and load-related dissipation must remain within the package thermal limits after adding supply-decoupling-network losses; the exact dissipation and junction temperature require the circuit’s actual supply and load values. Use short, low-inductance supply connections and decouple each supply pin according to the manufacturer guidance.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement appears in the accessible manufacturer and distributor information.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

OPA228UA datasheet OPA228UA pinout OPA228UA datasheet pdf OPA228UA 8-SOIC pinout OPA228UA equivalent OPA228UA replacement OPA228UA cross reference OPA228UA vs OP37UA Texas Instruments OPA228UA OPA228UA 33 MHz op amp OPA228UA precision signal conditioning OPA228UA price OPA228UA stock OPA228UA application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments OPA228UA OPA228UB OPA228UC OP37UA OP37UB OP37UC operational amplifier precision amplifier low-noise amplifier signal conditioning active filter sensor interface current measurement gain-bandwidth product slew rate closed-loop gain noise gain input offset voltage input bias current common-mode voltage 8-SOIC SOIC package family surface-mount package semiconductor
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন