OPA234EA - Low-Power Precision Op Amp | Texas Instruments
MPN: OPA234EA ✗ জীবনকালের সমাপ্তিOPA234EA সারাংশ
An operational amplifier, or op amp, is an analog voltage amplifier that uses differential feedback to control gain, bandwidth, offset, and output behavior. OPA234 belongs to the precision operational-amplifier hierarchy, which sits within the broader amplifier-IC and signal-conditioning categories. Its dual-channel configuration reduces component count when a board needs matched amplifiers for differential measurement, current sensing, filtering, or signal conversion.
The OPA234EA provides a maximum input offset voltage of 100 µV, maximum input bias current of 25 nA, and low quiescent current. These characteristics are important in precision signal paths because input offset affects measurement accuracy, bias current influences source impedance errors, and quiescent current affects supply power and thermal behavior. The wide supply range also permits operation from compact single rails or conventional ±15 V laboratory and industrial supplies.
The manufacturer specifies operation at +2.7 V, +5 V, and ±15 V, providing useful coverage for low-voltage embedded systems as well as higher-voltage analog equipment. High common-mode rejection and power-supply rejection are also listed as key features. These rejection characteristics help suppress unwanted output movement caused by signals common to both inputs or by supply-voltage variation, making the device suitable for precision frontend conditioning.
Typical uses include bridge and thermocouple signal conditioning, low-current measurements, analog sensor interfaces, active filters, and low-voltage data-acquisition systems. The dual amplifier can process two channels or form a differential amplifier, instrumentation amplifier stage, or transimpedance front end. System designers should account for input common-mode range, output swing, stability, and bias-current error when selecting external resistor and capacitor networks.
A practical design consideration is the input bias current interacting with high source impedance. Even with a maximum bias current of 25 nA, a very large sensor impedance can create an unwanted input-voltage offset. Use the manufacturer pin-description table to assign the eight VSSOP connections, connect decoupling close to the supply pins, and validate noise and stability across the intended load range.
This page combines the verified device characteristics with same-family drop-in options, application guidance, package-level implementation notes, and parameter-by-parameter comparisons. It is intended to help engineers identify whether the OPA234EA matches the required supply range, precision, power, package, and signal-conditioning constraints before board-level design begins.
এর জন্য ড্রপ-ইন বিকল্প OPA234EA — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
OPA2340
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
OPA2341
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
OPA2342
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
OPA2343
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
OPA234EA/250
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
OPA234EA সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| কোনো স্পেসিফিকেশন পাওয়া যায়নি |
OPA234EA পিন কনফিগারেশন
| পিন 1 | OUTA — Amplifier A output |
| পিন 2 | -INA — Inverting input for amplifier A |
| পিন 3 | +INA — Non-inverting input for amplifier A |
| পিন 4 | V- — Negative supply connection |
| পিন 5 | +INB — Non-inverting input for amplifier B |
| পিন 6 | -INB — Inverting input for amplifier B |
| পিন 7 | OUTB — Amplifier B output |
| পিন 8 | V+ — Positive supply connection |
সাধারণ ব্যবহার
OPA234EA এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Bridge Sensor Signal Conditioning, Low-Power Sensor Front End, Precision Current Measurement, Active Analog Filtering, Data Acquisition Instrumentation, Industrial Control and Measurement.
Bridge Sensor Signal Conditioning
OPA234EA fits precision bridge measurement because its maximum input offset voltage is 100 µV and maximum input bias current is 25 nA, helping preserve small differential signals near the bridge output. The dual configuration can amplify the differential bridge signal and condition a reference or diagnostic channel in the same 8-VSSOP. The manufacturer specifies operation at +2.7 V, +5 V, and ±15 V, supporting both compact sensor modules and higher-voltage instrumentation. Design the gain network around the bridge impedance, confirm the input common-mode range, and verify output swing at the selected excitation voltage.
সুপারিশকৃত
Low-Power Sensor Front End
OPA234EA is suitable for battery-operated sensor interfaces because each amplifier draws approximately 250 µA under typical conditions. Its 100 µV maximum offset and 25 nA maximum input bias current help preserve precision when conditioning low-level sensor outputs. The +2.7 V operating point supports low-energy designs, while the 8-VSSOP keeps the two amplifier channels compact. Account for bias-current error across high source impedances, place supply decoupling near pins 4 and 8, and validate stability with the intended sensor and feedback network.
সুপারিশকৃত
Precision Current Measurement
OPA234EA can amplify the small voltage produced by a low-value sense resistor in a precision current-measurement circuit. The low 100 µV maximum offset limits additive signal error, while maximum input bias current of 25 nA helps when the amplifier is paired with a high-impedance bias network. Its approximately 250 µA per-amplifier current also supports compact, continuously powered instrumentation. Select the sense-resistor value to obtain usable output range, confirm that common-mode voltage remains inside the amplifier limits, and check output swing under maximum current.
সুপারিশকৃত
Active Analog Filtering
OPA234EA can implement first- and second-order active filters where low offset, low bias current, and approximately 250 µA per-amplifier quiescent current are useful. The two channels allow a state-variable or multiple-pole filter to be assembled without adding another package. The amplifier is specified at +2.7 V, +5 V, and ±15 V, enabling the same topology to follow different system rails. Calculate resistor and capacitor tolerances for the intended cutoff frequency, verify noise and gain-bandwidth behavior, and simulate the complete filter before fabrication.
সুপারিশকৃত
Data Acquisition Instrumentation
OPA234EA is well suited to low-level data-acquisition front ends that need two precision channels, low offset, and low supply current. One channel can amplify the measurement while the other handles gain, reference, or auxiliary signal conditioning. Support for +2.7 V, +5 V, and ±15 V permits deployment in portable instruments, embedded test systems, and laboratory-style equipment. Establish the required input bandwidth and settling behavior, check common-mode range for the source, and provide stable reference grounding to minimize errors in the conversion stage.
সুপারিশকৃত
Industrial Control and Measurement
OPA234EA can condition control and measurement signals in industrial systems that operate from low-voltage rails or split supplies. Its 100 µV maximum input offset supports precision comparison, its 25 nA maximum input bias current reduces error with high-impedance sensing networks, and approximately 250 µA per amplifier limits continuous power demand. The ±18 V dual-supply capability is useful where industrial signals use positive and negative rails. Protect sensitive inputs from transients, maintain the common-mode range under all operating states, and account for temperature drift during long-duration measurements.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা OPA234EA — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
For a new design, evaluate OPA2340, OPA2341, OPA2342, or OPA2343 when lifecycle continuity or improved device-specific characteristics are important, but verify their complete electrical tables before substitution. The same-package candidates retain the dual-amplifier architecture, yet offset, bandwidth, noise, supply current, common-mode range, and output swing can differ. No unnamed cross-brand candidate should be treated as drop-in without a manufacturer-confirmed pinout and parameter comparison. Because OPA234EA is obsolete, request traceability and a written lead-time confirmation before using remaining inventory in a new production design.
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | OPA2340 | OPA2341 | OPA2342 | OPA2343 | OPA234EA/250 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 8-VSSOP | 8-VSSOP | 8-VSSOP | 8-VSSOP | 8-VSSOP | 8-VSSOP |
| Amplifier Channels | 2 | 2 | 2 | 2 | 2 | 2 |
| Ordering Configuration | OPA234EA | Family MPN; orderable suffix requires confirmation | Family MPN; orderable suffix requires confirmation | Family MPN; orderable suffix requires confirmation | Family MPN; orderable suffix requires confirmation | 250-unit reel configuration |
মূল পার্থক্যসমূহ
- Original OPA234 precision performance with low power (বনামOPA2340)
- Exact electrical configuration in a 250-unit reel option (বনামOPA2341)
- Wide supply operation with specified low-voltage performance points (বনামOPA2342)
- Dual precision channels in a compact 8-VSSOP (বনামOPA2343)
ডিজাইন নোট
Check the complete input common-mode range and output swing at the selected supply voltage before closing the feedback network. OPA234EA can operate from a single supply up to +36 V, but low-voltage operation provides less headroom around the signal. The manufacturer specifies performance at +2.7 V, +5 V, and ±15 V; use the corresponding electrical-characteristic limits rather than extrapolating values from another supply condition.
Place the supply bypass capacitor immediately between pins 8 and 4, with a short return path to the device ground or supply-reference plane. Keep feedback resistors and sensitive input traces away from the bypass-current path and other switching nodes. Because OPA234EA provides two amplifiers in one package, preserve separation between noisy and precision channels where possible, and route each channel’s feedback loop as compactly as the circuit permits.
Evaluate bias-current error using the sensor or source impedance rather than only the amplifier’s 25 nA maximum input bias current. A high source resistance can turn a small bias current into a meaningful input-voltage error. For bridge, thermocouple, or other high-impedance sensing applications, use low-noise resistors, consider input-bias compensation, and verify the offset error and settling behavior over the full measurement bandwidth.
Estimated: at +5 V supply and approximately 250 µA per amplifier, the OPA234EA quiescent current is about 500 µA for both channels, corresponding to roughly 2.5 mW quiescent supply power before load-current and feedback-network effects. Actual power also includes output current and amplifier dissipation. Use these figures only as an initial power-budget estimate and confirm worst-case behavior from the manufacturer electrical characteristics.
কমপ্লায়েন্স তথ্য
No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified in the cited records. AEC-Q100 is not applicable because OPA234EA is a general-purpose precision operational amplifier rather than an automotive-qualified device.