Texas Instruments

OPA234EA - Low-Power Precision Op Amp | Texas Instruments

部品番号: OPA234EA ✗ 生産終了
MOQ: 1 |

OPA234EA 概要

Texas Instruments OPA234EA is a low-power, precision, dual operational amplifier designed for single-supply and dual-supply operation. It supports supplies up to +36 V or ±18 V, operates at +2.7 V, +5 V, and ±15 V, consumes approximately 250 µA per amplifier, and is packaged in an 8-VSSOP. The device combines two amplifiers in one package for signal conditioning, instrumentation, and precision analog systems.

An operational amplifier, or op amp, is an analog voltage amplifier that uses differential feedback to control gain, bandwidth, offset, and output behavior. OPA234 belongs to the precision operational-amplifier hierarchy, which sits within the broader amplifier-IC and signal-conditioning categories. Its dual-channel configuration reduces component count when a board needs matched amplifiers for differential measurement, current sensing, filtering, or signal conversion.

The OPA234EA provides a maximum input offset voltage of 100 µV, maximum input bias current of 25 nA, and low quiescent current. These characteristics are important in precision signal paths because input offset affects measurement accuracy, bias current influences source impedance errors, and quiescent current affects supply power and thermal behavior. The wide supply range also permits operation from compact single rails or conventional ±15 V laboratory and industrial supplies.

The manufacturer specifies operation at +2.7 V, +5 V, and ±15 V, providing useful coverage for low-voltage embedded systems as well as higher-voltage analog equipment. High common-mode rejection and power-supply rejection are also listed as key features. These rejection characteristics help suppress unwanted output movement caused by signals common to both inputs or by supply-voltage variation, making the device suitable for precision frontend conditioning.

Typical uses include bridge and thermocouple signal conditioning, low-current measurements, analog sensor interfaces, active filters, and low-voltage data-acquisition systems. The dual amplifier can process two channels or form a differential amplifier, instrumentation amplifier stage, or transimpedance front end. System designers should account for input common-mode range, output swing, stability, and bias-current error when selecting external resistor and capacitor networks.

A practical design consideration is the input bias current interacting with high source impedance. Even with a maximum bias current of 25 nA, a very large sensor impedance can create an unwanted input-voltage offset. Use the manufacturer pin-description table to assign the eight VSSOP connections, connect decoupling close to the supply pins, and validate noise and stability across the intended load range.

This page combines the verified device characteristics with same-family drop-in options, application guidance, package-level implementation notes, and parameter-by-parameter comparisons. It is intended to help engineers identify whether the OPA234EA matches the required supply range, precision, power, package, and signal-conditioning constraints before board-level design begins.

ドロップイン代替品: OPA234EA — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

OPA2340

✅ ドロップイン ⚠️ 仕様未検証
📦 8-VSSOP
Same-family dual-amplifier upgrade with the same 8-VSSOP footprint; offset, bandwidth, noise, and lifecycle ratings require comparison against the OPA234EA values.

📋 参考代替品(カタログ未掲載)

OPA2341

✅ ドロップイン ⚠️ 仕様未検証
📦 8-VSSOP
Same-family dual precision amplifier in 8-VSSOP; device-level offset, bandwidth, noise, and common-mode specifications differ from OPA234EA.

📋 参考代替品(カタログ未掲載)

OPA2342

✅ ドロップイン ⚠️ 仕様未検証
📦 8-VSSOP
Same-family pin-compatible dual amplifier; exact offset, bandwidth, supply-current, and lifecycle differences require full electrical-table verification.

📋 参考代替品(カタログ未掲載)

OPA2343

✅ ドロップイン ⚠️ 仕様未検証
📦 8-VSSOP
Same-family 8-VSSOP dual-amplifier option with family-level supply compatibility but different device-specific precision and dynamic ratings.

📋 参考代替品(カタログ未掲載)

OPA234EA/250

✅ ドロップイン
📦 8-VSSOP
Same OPA234EA device in a 250-unit reel configuration; electrical parameters are identical while the reel suffix changes the ordering code.

📋 参考代替品(カタログ未掲載)

OPA234EA 最大定格&電気的特性

仕様はありません

OPA234EA ピン構成

SOIC-8 Package Pinout Diagram SOIC-8 8-pin small outline IC, 3.9x4.9mm, P1.27mm, JEDEC MS-012. 1 8 2 7 3 6 4 5 SOIC-8
ピン 1 OUTA — Amplifier A output
ピン 2 -INA — Inverting input for amplifier A
ピン 3 +INA — Non-inverting input for amplifier A
ピン 4 V- — Negative supply connection
ピン 5 +INB — Non-inverting input for amplifier B
ピン 6 -INB — Inverting input for amplifier B
ピン 7 OUTB — Amplifier B output
ピン 8 V+ — Positive supply connection

主な用途

OPA234EA の用途: 6 件s: Bridge Sensor Signal Conditioning, Low-Power Sensor Front End, Precision Current Measurement, Active Analog Filtering, Data Acquisition Instrumentation, Industrial Control and Measurement.

🧩

Bridge Sensor Signal Conditioning

OPA234EA fits precision bridge measurement because its maximum input offset voltage is 100 µV and maximum input bias current is 25 nA, helping preserve small differential signals near the bridge output. The dual configuration can amplify the differential bridge signal and condition a reference or diagnostic channel in the same 8-VSSOP. The manufacturer specifies operation at +2.7 V, +5 V, and ±15 V, supporting both compact sensor modules and higher-voltage instrumentation. Design the gain network around the bridge impedance, confirm the input common-mode range, and verify output swing at the selected excitation voltage.

🧩

Low-Power Sensor Front End

OPA234EA is suitable for battery-operated sensor interfaces because each amplifier draws approximately 250 µA under typical conditions. Its 100 µV maximum offset and 25 nA maximum input bias current help preserve precision when conditioning low-level sensor outputs. The +2.7 V operating point supports low-energy designs, while the 8-VSSOP keeps the two amplifier channels compact. Account for bias-current error across high source impedances, place supply decoupling near pins 4 and 8, and validate stability with the intended sensor and feedback network.

⚡

Precision Current Measurement

OPA234EA can amplify the small voltage produced by a low-value sense resistor in a precision current-measurement circuit. The low 100 µV maximum offset limits additive signal error, while maximum input bias current of 25 nA helps when the amplifier is paired with a high-impedance bias network. Its approximately 250 µA per-amplifier current also supports compact, continuously powered instrumentation. Select the sense-resistor value to obtain usable output range, confirm that common-mode voltage remains inside the amplifier limits, and check output swing under maximum current.

🔧

Active Analog Filtering

OPA234EA can implement first- and second-order active filters where low offset, low bias current, and approximately 250 µA per-amplifier quiescent current are useful. The two channels allow a state-variable or multiple-pole filter to be assembled without adding another package. The amplifier is specified at +2.7 V, +5 V, and ±15 V, enabling the same topology to follow different system rails. Calculate resistor and capacitor tolerances for the intended cutoff frequency, verify noise and gain-bandwidth behavior, and simulate the complete filter before fabrication.

📟

Data Acquisition Instrumentation

OPA234EA is well suited to low-level data-acquisition front ends that need two precision channels, low offset, and low supply current. One channel can amplify the measurement while the other handles gain, reference, or auxiliary signal conditioning. Support for +2.7 V, +5 V, and ±15 V permits deployment in portable instruments, embedded test systems, and laboratory-style equipment. Establish the required input bandwidth and settling behavior, check common-mode range for the source, and provide stable reference grounding to minimize errors in the conversion stage.

🏭

Industrial Control and Measurement

OPA234EA can condition control and measurement signals in industrial systems that operate from low-voltage rails or split supplies. Its 100 µV maximum input offset supports precision comparison, its 25 nA maximum input bias current reduces error with high-impedance sensing networks, and approximately 250 µA per amplifier limits continuous power demand. The ±18 V dual-supply capability is useful where industrial signals use positive and negative rails. Protect sensitive inputs from transients, maintain the common-mode range under all operating states, and account for temperature drift during long-duration measurements.

おすすめ製品の概要

OPA2340 Same-family precision dual-amplifier upgrade candidate 使用用途: Bridge Sensor Signal Conditioning, Precision Current Measurement, Data Acquisition Instrumentation OPA2341 Same-family pin-compatible signal-conditioning candidate 使用用途: Bridge Sensor Signal Conditioning, Active Analog Filtering, Industrial Control and Measurement OPA2342 Same-family low-power precision amplifier candidate 使用用途: Low-Power Sensor Front End, Active Analog Filtering, Industrial Control and Measurement OPA2343 Same-family dual-amplifier design alternative 使用用途: Low-Power Sensor Front End, Data Acquisition Instrumentation OPA234EA/250 Same electrical device in a 250-unit reel configuration 使用用途: Precision Current Measurement
What is the operating voltage range of OPA234EA?
The OPA234EA operates from a single supply up to +36 V or from a dual supply up to ±18 V. According to the Texas Instruments datasheet, performance is guaranteed at +2.7 V, +5 V, and ±15 V, allowing the same dual amplifier family to support low-voltage portable systems, 5 V instrumentation, and conventional bipolar analog equipment. The selected operating voltage must also remain compatible with the required input common-mode range and output swing.
How much quiescent current does OPA234EA consume?
The OPA234EA consumes approximately 250 µA per amplifier at typical operating conditions. Because the device contains two amplifiers in one 8-VSSOP package, the total supply current is approximately twice the per-amplifier value under comparable conditions. This low quiescent current is especially useful in battery-operated instrumentation, portable test equipment, and low-power sensor systems where continuous supply current affects operating time.
What are the key specifications of OPA234EA that engineers should know?
OPA234EA is a dual precision operational amplifier with a maximum input offset voltage of 100 µV, maximum input bias current of 25 nA, and approximately 250 µA quiescent current per amplifier. According to the Texas Instruments datasheet, it supports single supplies up to +36 V and dual supplies up to ±18 V, with guaranteed performance at +2.7 V, +5 V, and ±15 V. The device is supplied in an 8-VSSOP package.
Where can I download the OPA234EA datasheet PDF?
The OPA234EA datasheet PDF is accessible through the Burr-Brown and Texas Instruments datasheet listing linked on this page. The document is titled “Low Power, Precision Single-supply Operational Amplifiers” and includes the recommended operating conditions, electrical characteristics, pin descriptions, and application information. Use the manufacturer pin table when assigning the eight VSSOP pins and verify the ordering suffix associated with the required reel or cut-tape configuration.
Where can I find the OPA234EA pinout?
The OPA234EA uses an 8-VSSOP package with two complete operational-amplifier channels. According to the Texas Instruments pin-description table, the standard dual-amplifier arrangement provides outputs on pins 1 and 7, inverting inputs on pins 2 and 6, non-inverting inputs on pins 3 and 5, negative supply on pin 4, and positive supply on pin 8. Confirm every connection against the manufacturer datasheet before routing the PCB.
Is OPA234EA suitable for low-voltage sensor interfaces?
Yes, OPA234EA is suitable for many low-voltage sensor interfaces because Texas Instruments specifies operation at +2.7 V, +5 V, and ±15 V. Its maximum input offset voltage of 100 µV and maximum input bias current of 25 nA support precision conditioning, while approximately 250 µA per amplifier limits supply demand. Suitability still depends on the sensor output range, source impedance, required common-mode voltage, and noise performance.
What is the difference between OPA234EA and OPA2340?
OPA234EA is the original low-power precision OPA234-series member, while OPA2340 is a newer family option with different device-level performance specifications. Both are dual precision amplifiers associated with low-voltage operation and current-consumption-conscious applications, but the exact offset, bandwidth, noise, overload recovery, and lifecycle characteristics must be compared before substitution. For a production redesign, verify the complete datasheet electrical table and package drawing rather than relying on the amplifier type alone.
OPA234EA vs OPA2341 - which is better for precision measurement?
OPA234EA is preferable when the design specifically requires the original OPA234 family electrical limits, including the listed maximum offset voltage of 100 µV and approximately 250 µA per-amplifier quiescent current. OPA2341 may be considered for a new design after checking its offset, bandwidth, noise, common-mode behavior, and supply limits against the measurement requirement. Neither choice is based on package count alone, because both devices provide two amplifiers in the same 8-VSSOP footprint.
When should I choose OPA234EA over OPA2342?
Choose OPA234EA when the bill of materials specifically calls for the original OPA234 characteristics, particularly its listed 100 µV maximum input offset voltage and approximately 250 µA per-amplifier quiescent current. Choose OPA2342 for a new design only after its detailed electrical characteristics satisfy the signal, noise, and bandwidth targets. The decision should also consider lifecycle continuity, because OPA234EA is listed as obsolete while newer family options may provide a more sustainable sourcing path.
What can replace OPA234EA?
OPA234EA can be replaced by a pin-compatible member of the OPA234 family only after its complete electrical characteristics and ordering package are verified. OPA2340, OPA2341, OPA2342, and OPA2343 are same-brand family candidates identified for engineering evaluation, and OPA234EA/250 is explicitly indexed in a component cross-reference listing. No suitable cross-brand replacement is asserted without a named, package-verified source result.
Can OPA2340 replace OPA234EA without PCB changes?
OPA2340 is a candidate for an 8-VSSOP pin-compatible redesign because it belongs to the same manufacturer’s low-power precision dual-amplifier family. However, “pin compatible” does not guarantee identical performance. Before replacing OPA234EA, compare offset voltage, bias current, bandwidth, input noise, common-mode range, output swing, supply current, slew rate, and overload behavior, then confirm the exact orderable package suffix.
What is the best Analog Devices equivalent for OPA234EA?
A cross-brand Analog Devices equivalent should not be selected from a generic family list because an amplifier must match the 8-VSSOP footprint, dual-channel pin arrangement, supply range, and electrical limits. The OPA234 cross-reference results identify an Analog Devices option, but the search record does not expose its MPN or complete parameter set. Request a specific manufacturer cross-reference and verify every pin and rating before treating any Analog Devices part as a drop-in replacement.
Where to buy OPA234EA online?
Use the Request a Quote form on this page to request OPA234EA availability, package configuration, minimum order quantity, and current lead time. Because OPA234EA is listed as obsolete, confirm whether the requested quantity can be supplied from remaining inventory and request the manufacturer traceability and lot information appropriate to the application. The current commercial terms should be reviewed before committing a new production BOM.
What is the price of OPA234EA?
Current OPA234EA pricing depends on order quantity, package suffix, condition, and available inventory. Use the Request a Quote form on this page with the required quantity and exact suffix, such as OPA234EA, OPA234EA/250, or OPA234EA/2K5, to obtain a current quotation. For an obsolete component, also request traceability details and confirm whether any sourced units are original, manufacturer-sealed stock.
What is the lead time for OPA234EA?
The lead time for OPA234EA depends on remaining manufacturer inventory and the selected orderable suffix. Submit the required quantity through the Request a Quote form on this page and request a written lead-time confirmation before scheduling production. For obsolete devices, distinguish delivery of existing stock from a new manufacturing plan, and include a traceability requirement if continued production is necessary.
Is OPA234EA in stock?
Stock status for OPA234EA must be confirmed for the exact package suffix and order quantity because the device is listed as obsolete. Use the Request a Quote form on this page to request current availability, minimum order quantity, and lead time. Inventory descriptions may refer to different suffixes or channels, so the quotation should explicitly identify the exact MPN and manufacturer traceability requirements.

エンジニアリング参考データ: OPA234EA — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose OPA234EA when an existing precision analog design specifically requires its original OPA234 electrical characteristics, particularly the listed 100 µV maximum offset voltage, 25 nA maximum input bias current, and approximately 250 µA quiescent current per amplifier. Its supply capability of +36 V single or ±18 V dual makes it useful in both compact low-voltage and higher-voltage precision systems. OPA234EA/250 is the practical choice when the same device and 8-VSSOP are required in a 250-unit reel configuration.

For a new design, evaluate OPA2340, OPA2341, OPA2342, or OPA2343 when lifecycle continuity or improved device-specific characteristics are important, but verify their complete electrical tables before substitution. The same-package candidates retain the dual-amplifier architecture, yet offset, bandwidth, noise, supply current, common-mode range, and output swing can differ. No unnamed cross-brand candidate should be treated as drop-in without a manufacturer-confirmed pinout and parameter comparison. Because OPA234EA is obsolete, request traceability and a written lead-time confirmation before using remaining inventory in a new production design.

代替品との比較

パラメータ この製品 OPA2340 OPA2341 OPA2342 OPA2343 OPA234EA/250
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 8-VSSOP 8-VSSOP 8-VSSOP 8-VSSOP 8-VSSOP 8-VSSOP
Amplifier Channels 2 2 2 2 2 2
Ordering Configuration OPA234EA Family MPN; orderable suffix requires confirmation Family MPN; orderable suffix requires confirmation Family MPN; orderable suffix requires confirmation Family MPN; orderable suffix requires confirmation 250-unit reel configuration

主な差別化要因

  • Original OPA234 precision performance with low power (vs OPA2340)
  • Exact electrical configuration in a 250-unit reel option (vs OPA2341)
  • Wide supply operation with specified low-voltage performance points (vs OPA2342)
  • Dual precision channels in a compact 8-VSSOP (vs OPA2343)

設計ノート

Check the complete input common-mode range and output swing at the selected supply voltage before closing the feedback network. OPA234EA can operate from a single supply up to +36 V, but low-voltage operation provides less headroom around the signal. The manufacturer specifies performance at +2.7 V, +5 V, and ±15 V; use the corresponding electrical-characteristic limits rather than extrapolating values from another supply condition.

Place the supply bypass capacitor immediately between pins 8 and 4, with a short return path to the device ground or supply-reference plane. Keep feedback resistors and sensitive input traces away from the bypass-current path and other switching nodes. Because OPA234EA provides two amplifiers in one package, preserve separation between noisy and precision channels where possible, and route each channel’s feedback loop as compactly as the circuit permits.

Evaluate bias-current error using the sensor or source impedance rather than only the amplifier’s 25 nA maximum input bias current. A high source resistance can turn a small bias current into a meaningful input-voltage error. For bridge, thermocouple, or other high-impedance sensing applications, use low-noise resistors, consider input-bias compensation, and verify the offset error and settling behavior over the full measurement bandwidth.

Estimated: at +5 V supply and approximately 250 µA per amplifier, the OPA234EA quiescent current is about 500 µA for both channels, corresponding to roughly 2.5 mW quiescent supply power before load-current and feedback-network effects. Actual power also includes output current and amplifier dissipation. Use these figures only as an initial power-budget estimate and confirm worst-case behavior from the manufacturer electrical characteristics.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No explicit RoHS, REACH, lead-free, halogen-free, conflict-minerals, or automotive qualification statement was identified in the cited records. AEC-Q100 is not applicable because OPA234EA is a general-purpose precision operational amplifier rather than an automotive-qualified device.

データ検証日: 2026-11-09 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

OPA234EA datasheet OPA234EA datasheet pdf OPA234EA pinout OPA234EA specifications OPA234EA 8-VSSOP OPA234EA precision op amp OPA234EA single supply OPA234EA equivalent OPA234EA replacement OPA234EA cross reference OPA234EA vs OPA2340 Texas Instruments OPA234EA OPA234EA price OPA234EA stock OPA234EA application circuit

関連部品&用語

Texas Instruments OPA234EA OPA2340 OPA2341 OPA2342 OPA2343 OPA234EA/250 OPA234 series operational amplifier precision operational amplifier dual amplifier signal conditioning low-dropout bias architecture input offset voltage input bias current quiescent current common-mode rejection ratio CMRR power-supply rejection ratio PSRR single-supply operation dual-supply operation 8-VSSOP surface-mount package precision measurement active filter
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示