OPA2544T - High-Voltage High-Current Dual Op Amp | TI
MPN: OPA2544T ✓ সক্রিয়OPA2544T সারাংশ
An operational amplifier is a voltage-gain and current-buffer device that compares its inverting and non-inverting inputs and drives its output to reduce the difference between them. Within the power-management hierarchy, an operational amplifier is an analog integrated circuit, while the OPA2544T specifically occupies the high-voltage, high-current power-amplifier segment. Its dual configuration provides two independent amplifier channels for signal conditioning, closed-loop control, or differential output stages.
The principal feature of the OPA2544T is its combination of two channels with high-voltage and high-current capability in one package. The TO-220-11 construction provides a practical mechanical and thermal advantage over a small-outline surface-mount package in applications where sustained output current and copper heat dissipation are important. The wide package also offers lead clearance that can simplify connection between a power amplifier and external output-network or protection components.
OPA2544T operation depends on the external feedback network, supply rails, output-load conditions, and stability compensation selected for the target circuit. Because the device is intended to drive demanding loads, designers should evaluate output-stage dissipation, safe operating limits, thermal rise, and the permissible capacitive and inductive loads described by Texas Instruments. Feedback components should be placed close to the relevant input pins to reduce parasitic feedback and oscillation risk.
Typical uses include low-frequency motor and solenoid control loops, programmable power-supply error amplifiers, audio mixer and line-driver stages, high-voltage measurement front ends, and general industrial analog control. The two amplifiers can implement independent channels, cascaded gain blocks, or push-pull arrangements when supported by the application circuit and the device specifications.
Thermal design is central to any high-current implementation. Calculate worst-case dissipation from supply voltage, output voltage, load current, quiescent current, and the number of active channels. Provide copper area, adequate spacing from heat-sensitive components, and a heat sink when the calculated junction temperature exceeds the design limit. Local input and feedback routing should avoid high-current output paths.
This product page combines the official manufacturer description, package information, cross-reference findings, practical thermal guidance, application patterns, and replacement considerations. It is designed to help engineers identify the correct amplifier, evaluate its board-level constraints, and decide whether a verified drop-in ordering alternative can simplify sourcing without changing the PCB footprint.
এর জন্য ড্রপ-ইন বিকল্প OPA2544T — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
OPA2544TG3
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
OPA2544T সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Amplifier Type | Dual operational amplifier |
| Number of Circuits | 2 circuits |
| প্যাকেজ | TO-220-11, 11 leads |
| মাউন্টিং টাইপ | Through-hole |
OPA2544T to-220-11, 11 leads পিন কনফিগারেশন গাইড
OPA2544T (to-220-11, 11 leads প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি OPA2544T.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
OPA2544T এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Motor Control Loops, Solenoid and Relay Driver Interfaces, Programmable Power Supply Feedback, Audio Line and Mixer Amplification, High-Voltage Instrumentation Front Ends, Test and Measurement Output Drivers.
Industrial Motor Control Loops
OPA2544T fits low-frequency industrial motor-control loops where the amplifier must command a power stage rather than only process a small sensor signal. Its two amplifier channels can be assigned to separate control or feedback functions, while the 11-lead TO-220 package supports thermal management in a through-hole industrial design. Use each channel with the feedback network and external drive transistor required by the motor topology, and include flyback protection for inductive kickback. Because sustained motor current can create substantial heat, calculate dissipation at the maximum commanded load and attach the package to a heat sink when the junction-temperature calculation requires it.
সুপারিশকৃত
Solenoid and Relay Driver Interfaces
OPA2544T is suitable for precision solenoid-driver interfaces that translate a low-level command into a high-current drive signal. The high-voltage, high-current dual-amplifier architecture provides more drive authority than a conventional signal-level op amp, while the two channels support complementary or independent functions. The TO-220-11 package gives the design a practical path to heat dissipation through a heat sink and PCB copper. Add a suitable flyback diode or clamp across the inductive load, keep switching-current loops compact, and separate the power-return path from sensitive feedback nodes to limit false triggering and electromagnetic coupling.
সুপারিশকৃত
Programmable Power Supply Feedback
OPA2544T can serve as the error amplifier in a programmable laboratory or industrial power supply when the design requires high-voltage and high-current drive capability. One channel may amplify the remote-sense or reference error signal, while the other can provide monitoring or an auxiliary control function. The 11-lead TO-220 package assists with heat removal from the high-power feedback stage and allows a conservative, serviceable through-hole layout. The circuit still requires careful loop compensation, output-current protection, and separation between the sensitive sense node and the power-conversion stage.
সুপারিশকৃত
Audio Line and Mixer Amplification
OPA2544T supports audio line, mixer, and distribution stages where output-current capability and supply headroom are more important than minimum-noise operation. Two channels can handle left and right signals or form an active balanced input stage. Its high-voltage, high-current output stage can drive a practical load through the external output network defined by the application. In an audio design, control loop gain and bandwidth to prevent oscillation, maintain thermal margin at maximum continuous output power, and use the TO-220-11 thermal path to dissipate the amplifier's output-stage loss without raising the channel temperature excessively.
সুপারিশকৃত
High-Voltage Instrumentation Front Ends
OPA2544T can be used in instrumentation front ends that require high common-mode capability, strong output drive, or both. A dual-device arrangement supports signal conditioning and a separate excitation or monitoring function. The high-voltage and high-current architecture gives the designer more freedom than a conventional low-voltage operational amplifier, while the 11-lead TO-220 package provides a robust through-hole implementation with a direct thermal path. Place input networks close to the relevant pins, guard sensitive nodes from power-supply and return-current coupling, and verify that input common-mode and output-swing limits remain within the application requirement.
সুপারিশকৃত
Test and Measurement Output Drivers
OPA2544T is appropriate for test and measurement equipment that must drive a load, buffer a source, or generate a controlled analog output. Its two channels can be configured for independent outputs, differential excitation, or a gain-and-buffer arrangement. The 11-lead TO-220 package is practical for laboratory-style equipment where through-hole construction and a straightforward heat-sink connection simplify maintenance and assembly. Confirm the operating voltage, output-current, output-swing, and stability requirements for the selected load, then add resistive isolation where the test fixture could otherwise introduce excessive capacitance.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা OPA2544T — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | OPA2544TG3 |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | TO-220-11 | TO-220-11 |
| Number of Circuits | 2 circuits | 2 circuits |
| Lead Count | 11 leads | 11 leads |
| Mounting Type | Through-hole | Through-hole |
| Special Features | High-voltage, high-current, dual operational amplifier | Same-family high-voltage, high-current dual operational amplifier |
মূল পার্থক্যসমূহ
- Two-channel power-amplifier integration (বনামOPA2544TG3)
- High-current package continuity (বনামOPA2544TG3)
- Sourcing flexibility within one family (বনামOPA2544TG3)
ডিজাইন নোট
Estimated: calculate each active channel's dissipation as output voltage times output current plus supply-voltage times quiescent current, then include quiescent loss from the inactive channel. Apply the calculated channel loss to the manufacturer's thermal model and verify that junction temperature remains below its limit at the maximum ambient temperature. The TO-220-11 package permits a heat-sink connection, but package selection alone does not guarantee safe operating temperature; verify the heat-sink resistance and copper area required for the actual load.
Place the feedback and compensation components directly beside their associated amplifier pins, and keep the input nodes away from output-current and supply-return paths. Use a compact high-current output route with a cross section appropriate for the required load, while preserving a low-impedance ground reference for the analog signal. Review the package drawing for the thermal-tab connection before finalizing copper artwork, because incorrect tab handling can reduce heat transfer or create an unintended electrical connection.
Do not substitute a power op amp solely because it has the same channel count or package family. Check the exact lead functions, maximum supply voltage, output-current rating, common-mode range, output-swing limits, gain-bandwidth product, slew rate, stability requirements, and thermal limits. In inductive or capacitive loads, include suitable protection and validate the compensation network with the complete output network; an apparently pin-compatible amplifier can otherwise oscillate or fail under load.
Provide local bypass capacitance and route it using short, low-inductance connections as specified in the manufacturer application guidance. Keep power-supply return current out of the signal-reference path, particularly when the dual amplifier drives two substantial loads. Add output-current limiting or an appropriate protection stage where the driven load could exceed the device's safe operating envelope. Account for startup transients, supply-step response, and the inrush behavior of the external load.
কমপ্লায়েন্স তথ্য
Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering suffix using the current Texas Instruments product and material-declaration documentation.