Texas Instruments

OPA2544T - High-Voltage High-Current Dual Op Amp | TI

N.º de pieza: OPA2544T ✓ Activo
TO-220-11, 11 leads Package
MOQ: 1 |

OPA2544T Descripción general

The Texas Instruments OPA2544T is a high-voltage, high-current dual operational amplifier with two amplifier circuits in an 11-lead TO-220 package. Its combination of high-voltage capability, high-current output capability, and a thermally capable through-hole package makes it suitable for industrial power-control loops, high-compliance actuator drivers, audio power stages, test equipment, and instrumentation requiring more drive capability than a conventional signal-level operational amplifier.

An operational amplifier is a voltage-gain and current-buffer device that compares its inverting and non-inverting inputs and drives its output to reduce the difference between them. Within the power-management hierarchy, an operational amplifier is an analog integrated circuit, while the OPA2544T specifically occupies the high-voltage, high-current power-amplifier segment. Its dual configuration provides two independent amplifier channels for signal conditioning, closed-loop control, or differential output stages.

The principal feature of the OPA2544T is its combination of two channels with high-voltage and high-current capability in one package. The TO-220-11 construction provides a practical mechanical and thermal advantage over a small-outline surface-mount package in applications where sustained output current and copper heat dissipation are important. The wide package also offers lead clearance that can simplify connection between a power amplifier and external output-network or protection components.

OPA2544T operation depends on the external feedback network, supply rails, output-load conditions, and stability compensation selected for the target circuit. Because the device is intended to drive demanding loads, designers should evaluate output-stage dissipation, safe operating limits, thermal rise, and the permissible capacitive and inductive loads described by Texas Instruments. Feedback components should be placed close to the relevant input pins to reduce parasitic feedback and oscillation risk.

Typical uses include low-frequency motor and solenoid control loops, programmable power-supply error amplifiers, audio mixer and line-driver stages, high-voltage measurement front ends, and general industrial analog control. The two amplifiers can implement independent channels, cascaded gain blocks, or push-pull arrangements when supported by the application circuit and the device specifications.

Thermal design is central to any high-current implementation. Calculate worst-case dissipation from supply voltage, output voltage, load current, quiescent current, and the number of active channels. Provide copper area, adequate spacing from heat-sensitive components, and a heat sink when the calculated junction temperature exceeds the design limit. Local input and feedback routing should avoid high-current output paths.

This product page combines the official manufacturer description, package information, cross-reference findings, practical thermal guidance, application patterns, and replacement considerations. It is designed to help engineers identify the correct amplifier, evaluate its board-level constraints, and decide whether a verified drop-in ordering alternative can simplify sourcing without changing the PCB footprint.

Alternativas directas para OPA2544T — mismo encapsulado, compatible pin a pin. Se excluyen las piezas de otro encapsulado que requieren retrabajo de la PCB.

OPA2544TG3

✅ Sustitución directa
📦 TO-220-11
Same OPA2544 family ratings with 0 V, 0 A, and 0-channel differences; ordering suffix differs

📋 Alternativa de referencia (no en el catálogo)

OPA2544T Valores máximos y características eléctricas

Amplifier Type Dual operational amplifier
Number of Circuits 2 circuits
Encapsulado TO-220-11, 11 leads
Tipo de montaje Through-hole

Guía de configuración de pines de OPA2544T to-220-11, 11 leads

Configuración de pines para OPA2544T (encapsulado to-220-11, 11 leads). Este componente analógico presenta pines de entrada, salida y alimentación. Consulte la hoja de datos del fabricante para conocer las configuraciones de los pines de ajuste de offset, compensación y habilitación. Ideal para circuitos de acondicionamiento de señal y amplificadores.

Diagrama de patillaje del encapsulado to-220-11, 11 leads para OPA2544T

No hay datos detallados de patillaje disponibles para OPA2544T.

Consulte la hoja de datos para ver la configuración completa de patillas.

Aplicaciones típicas

OPA2544T es adecuado para 6 aplicacións: Industrial Motor Control Loops, Solenoid and Relay Driver Interfaces, Programmable Power Supply Feedback, Audio Line and Mixer Amplification, High-Voltage Instrumentation Front Ends, Test and Measurement Output Drivers.

🏭

Industrial Motor Control Loops

OPA2544T fits low-frequency industrial motor-control loops where the amplifier must command a power stage rather than only process a small sensor signal. Its two amplifier channels can be assigned to separate control or feedback functions, while the 11-lead TO-220 package supports thermal management in a through-hole industrial design. Use each channel with the feedback network and external drive transistor required by the motor topology, and include flyback protection for inductive kickback. Because sustained motor current can create substantial heat, calculate dissipation at the maximum commanded load and attach the package to a heat sink when the junction-temperature calculation requires it.

⚡

Solenoid and Relay Driver Interfaces

OPA2544T is suitable for precision solenoid-driver interfaces that translate a low-level command into a high-current drive signal. The high-voltage, high-current dual-amplifier architecture provides more drive authority than a conventional signal-level op amp, while the two channels support complementary or independent functions. The TO-220-11 package gives the design a practical path to heat dissipation through a heat sink and PCB copper. Add a suitable flyback diode or clamp across the inductive load, keep switching-current loops compact, and separate the power-return path from sensitive feedback nodes to limit false triggering and electromagnetic coupling.

🔧

Programmable Power Supply Feedback

OPA2544T can serve as the error amplifier in a programmable laboratory or industrial power supply when the design requires high-voltage and high-current drive capability. One channel may amplify the remote-sense or reference error signal, while the other can provide monitoring or an auxiliary control function. The 11-lead TO-220 package assists with heat removal from the high-power feedback stage and allows a conservative, serviceable through-hole layout. The circuit still requires careful loop compensation, output-current protection, and separation between the sensitive sense node and the power-conversion stage.

🎧

Audio Line and Mixer Amplification

OPA2544T supports audio line, mixer, and distribution stages where output-current capability and supply headroom are more important than minimum-noise operation. Two channels can handle left and right signals or form an active balanced input stage. Its high-voltage, high-current output stage can drive a practical load through the external output network defined by the application. In an audio design, control loop gain and bandwidth to prevent oscillation, maintain thermal margin at maximum continuous output power, and use the TO-220-11 thermal path to dissipate the amplifier's output-stage loss without raising the channel temperature excessively.

📡

High-Voltage Instrumentation Front Ends

OPA2544T can be used in instrumentation front ends that require high common-mode capability, strong output drive, or both. A dual-device arrangement supports signal conditioning and a separate excitation or monitoring function. The high-voltage and high-current architecture gives the designer more freedom than a conventional low-voltage operational amplifier, while the 11-lead TO-220 package provides a robust through-hole implementation with a direct thermal path. Place input networks close to the relevant pins, guard sensitive nodes from power-supply and return-current coupling, and verify that input common-mode and output-swing limits remain within the application requirement.

🖥️

Test and Measurement Output Drivers

OPA2544T is appropriate for test and measurement equipment that must drive a load, buffer a source, or generate a controlled analog output. Its two channels can be configured for independent outputs, differential excitation, or a gain-and-buffer arrangement. The 11-lead TO-220 package is practical for laboratory-style equipment where through-hole construction and a straightforward heat-sink connection simplify maintenance and assembly. Confirm the operating voltage, output-current, output-swing, and stability requirements for the selected load, then add resistive isolation where the test fixture could otherwise introduce excessive capacitance.

Resumen de productos recomendados

OPA2544T Texas Instruments Se usa en: Industrial Motor Control Loops, Solenoid and Relay Driver Interfaces, Programmable Power Supply Feedback, Audio Line and Mixer Amplification, High-Voltage Instrumentation Front Ends, Test and Measurement Output Drivers OPA2544TG3 Same-family dual amplifier option Se usa en: Industrial Motor Control Loops, Solenoid and Relay Driver Interfaces, Programmable Power Supply Feedback, Audio Line and Mixer Amplification, High-Voltage Instrumentation Front Ends, Test and Measurement Output Drivers
What is the OPA2544T?
The OPA2544T is a Texas Instruments high-voltage, high-current dual operational amplifier with two amplifier circuits in an 11-lead TO-220 package. According to the OPA2544 manufacturer datasheet, its function is to provide high-compliance, high-drive analog amplification in applications that exceed the current capability of conventional signal-level operational amplifiers. The package provides a practical thermal and mechanical advantage for designs with sustained output-current and power-dissipation requirements.
Where can I download the OPA2544T datasheet PDF?
The official OPA2544T datasheet PDF is available from Texas Instruments at https://www.ti.com/lit/ds/symlink/opa2544.pdf. The document describes the dual high-voltage, high-current operational amplifier, its electrical characteristics, package information, and application guidance. Use the pin-description table and package drawing in that datasheet when assigning the 11 TO-220 leads and when designing feedback, decoupling, output-current, and thermal solutions.
Where can I find the OPA2544T pinout?
The OPA2544T pinout is found in the pin-description table and package drawing within the official Texas Instruments OPA2544 datasheet. The device is supplied in an 11-lead TO-220 package containing two operational-amplifier channels. Do not infer lead functions from another power-amplifier package, because exposed-tab and compensation-pin assignments can differ between otherwise similar devices. Use the manufacturer pin table as the controlling document for PCB layout and test-point assignment.
What are the key specifications of OPA2544T engineers should know?
The OPA2544T provides two operational-amplifier channels, high-voltage operation, high-current output capability, and an 11-lead TO-220 package. According to the Texas Instruments OPA2544 datasheet, these characteristics distinguish it from ordinary low-voltage signal-processing amplifiers. Exact supply limits, current ratings, gain-bandwidth product, slew rate, offset voltage, and thermal limits should be selected from the datasheet tables for the specific operating temperature and load.
How does OPA2544T compare with OPA2544TG3?
OPA2544T and OPA2544TG3 belong to the same Texas Instruments OPA2544 dual high-voltage, high-current amplifier family. The verified cross-reference listing identifies OPA2544TG3 as an ordering alternative for the OPA2544 family, and both are associated with the same 11-lead power-package format. Confirm the exact ordering suffix, temperature grade, lifecycle status, and lead-finish requirements in the manufacturer ordering table before treating one as a production replacement.
When should I choose OPA2544T over OPA2544TG3?
Choose OPA2544T when the OPA2544 family's dual-channel, high-voltage, high-current performance and 11-lead TO-220 construction meet the design, while its ordering suffix is approved for the production environment. Choose OPA2544TG3 when that specific ordering option is required by qualification, traceability, or procurement criteria. Because the core family architecture is the same, the decisive factors are package-level ordering details rather than a change in circuit function.
What is the best drop-in replacement for OPA2544T?
OPA2544TG3 is the verified same-family drop-in candidate identified for OPA2544T, preserving the dual-amplifier architecture and 11-lead TO-220 package. A replacement should not be accepted solely from family similarity: verify pin functions, electrical limits, thermal requirements, ordering suffix, and application requirements against the manufacturer datasheet before production use. Request a formal quotation and availability confirmation through the Request a Quote form on this page.
Can OPA2544TG3 replace OPA2544T without changing the PCB?
OPA2544TG3 can be considered for an OPA2544T PCB position because it is a verified drop-in candidate in the same OPA2544 family and 11-lead TO-220 format. The footprint compatibility does not remove the need for an engineering review. Check lead functions, maximum supply voltage, output-current limits, thermal limits, temperature grade, and any ordering-code-specific requirements in the official manufacturer documentation before substitution.
Is OPA2544T suitable for motor and solenoid driver applications?
OPA2544T can be suitable for motor and solenoid control applications when its high-voltage, high-current capability matches the load and feedback design. The dual architecture supports two independent control channels, and the 11-lead TO-220 package provides practical heat dissipation compared with a compact surface-mount package. The output stage still requires protection against inductive kickback, and the external transistor or driver topology must obey the datasheet's load and stability limits.
Where can I buy OPA2544T online?
Use the Request a Quote form on this page to request OPA2544T pricing, stock, minimum order quantity, and lead time from XAIPART. The OPA2544T is identified as a Texas Instruments dual operational amplifier in an 11-lead TO-220 package. Supply status can change, so request the exact ordering code and required quantity rather than relying on a historical listing snapshot. The manufacturer product page is https://www.ti.com/product/OPA2544 for technical and ordering information.
What is the price of OPA2544T?
Use the Request a Quote form on this page for the current OPA2544T price and quantity schedule. Pricing depends on order quantity, production volume, sourcing conditions, and component availability, so a historical unit figure should not be treated as a current quotation. The form allows buyers to request pricing for the exact OPA2544T ordering code, including tube quantities required by the production plan.
What is the lead time for OPA2544T?
Request the current OPA2544T lead time through the Request a Quote form on this page. Lead time depends on available factory inventory, allocated production capacity, order quantity, and the required delivery schedule. Specify a target quantity and required date when requesting the quotation so the supplier can confirm the most useful fulfillment option for the production build.
Is OPA2544T in stock?
Current OPA2544T inventory should be confirmed through the Request a Quote form on this page. Component availability can vary by package, order quantity, and manufacturing schedule, so an old stock observation should not be used as a production commitment. Include the required quantity, ship-to region, and target date in the request to obtain a current supply response for the exact OPA2544T part number.
How should OPA2544T be thermally managed?
Calculate worst-case OPA2544T dissipation from the actual supply and output voltages, load current, quiescent current, and whether one or both channels are active. Add that dissipation to the junction-temperature calculation and provide copper area plus a suitable heat sink when required. The TO-220-11 package supports heat dissipation, but its leadframe alone does not replace a thermal design. Avoid placing heat-sensitive analog circuitry directly beside the device without planned airflow or copper heat spreading.
What layout practices are important for OPA2544T?
Keep the feedback resistors, compensation components, and input traces short and place them close to their associated amplifier pins. Route high-current output current through conductors sized for the intended load rather than through sensitive input or feedback paths. Follow the manufacturer decoupling recommendations, maintain a quiet ground reference, and account for the exposed thermal tab in the package drawing when estimating heat flow. Validate stability with the intended output load and compensation network.
Is OPA2544T RoHS and REACH compliant?
The exact RoHS and REACH status for OPA2544T must be confirmed in Texas Instruments product documentation or the current material-declaration record. Do not infer regulatory status solely from the high-voltage description or the availability of a lead-free ordering suffix. Before production release, request the relevant manufacturer declaration and verify that the selected package and ordering variant match the documented declaration.

Datos de referencia de ingeniería para OPA2544T — comparación, orientación de diseño e información de cumplimiento.

Guía de selección

Choose OPA2544T when the design needs a dual high-voltage, high-current operational amplifier in an 11-lead TO-220 package and the ordering suffix has passed the required production, qualification, and sourcing review. Its two channels can support independent control, monitoring, audio, or output-drive functions, while the through-hole package offers a practical thermal path for sustained high-current operation. Choose OPA2544TG3 when it is the approved ordering option for procurement, traceability, qualification, or lifecycle requirements; it retains the same verified family architecture and package. Do not select either device from headline voltage and current ratings alone. Confirm the exact supply range, output-current capability, common-mode range, output swing, gain bandwidth, slew rate, stability conditions, and thermal limits in the manufacturer datasheet. For loads that are inductive, capacitive, or potentially excessive, include the required protection and compensation. If no same-package alternative has been verified for a future redesign, evaluate the electrical and mechanical implications rather than assuming another high-power operational amplifier is interchangeable.

Comparación con alternativas

Parámetro Este producto OPA2544TG3
Brand Texas Instruments Texas Instruments
Package TO-220-11 TO-220-11
Number of Circuits 2 circuits 2 circuits
Lead Count 11 leads 11 leads
Mounting Type Through-hole Through-hole
Special Features High-voltage, high-current, dual operational amplifier Same-family high-voltage, high-current dual operational amplifier

Diferenciadores clave

  • Two-channel power-amplifier integration (frente a OPA2544TG3)
  • High-current package continuity (frente a OPA2544TG3)
  • Sourcing flexibility within one family (frente a OPA2544TG3)

Notas de diseño

Estimated: calculate each active channel's dissipation as output voltage times output current plus supply-voltage times quiescent current, then include quiescent loss from the inactive channel. Apply the calculated channel loss to the manufacturer's thermal model and verify that junction temperature remains below its limit at the maximum ambient temperature. The TO-220-11 package permits a heat-sink connection, but package selection alone does not guarantee safe operating temperature; verify the heat-sink resistance and copper area required for the actual load.

Place the feedback and compensation components directly beside their associated amplifier pins, and keep the input nodes away from output-current and supply-return paths. Use a compact high-current output route with a cross section appropriate for the required load, while preserving a low-impedance ground reference for the analog signal. Review the package drawing for the thermal-tab connection before finalizing copper artwork, because incorrect tab handling can reduce heat transfer or create an unintended electrical connection.

Do not substitute a power op amp solely because it has the same channel count or package family. Check the exact lead functions, maximum supply voltage, output-current rating, common-mode range, output-swing limits, gain-bandwidth product, slew rate, stability requirements, and thermal limits. In inductive or capacitive loads, include suitable protection and validate the compensation network with the complete output network; an apparently pin-compatible amplifier can otherwise oscillate or fail under load.

Provide local bypass capacitance and route it using short, low-inductance connections as specified in the manufacturer application guidance. Keep power-supply return current out of the signal-reference path, particularly when the dual amplifier drives two substantial loads. Add output-current limiting or an appropriate protection stage where the driven load could exceed the device's safe operating envelope. Account for startup transients, supply-step response, and the inrush behavior of the external load.

Información de cumplimiento

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
Libre de plomo
Unknown
Libre de halógenos
Unknown
Minerales en conflicto
Unknown

Confirm RoHS, REACH, AEC-Q100, lead-free, halogen-free, and conflict-minerals status for the exact ordering suffix using the current Texas Instruments product and material-declaration documentation.

Datos verificados el: 2026-11-19 — datos verificados y seleccionados por el equipo de ingeniería de componentes de XAIPART

Búsquedas relacionadas

OPA2544T datasheet OPA2544T datasheet pdf OPA2544T pinout OPA2544T equivalent OPA2544T replacement OPA2544T vs OPA2544TG3 OPA2544T TO-220-11 OPA2544T high voltage op amp OPA2544T high current amplifier OPA2544T dual op amp OPA2544T application circuit OPA2544T price Texas Instruments OPA2544T OPA2544T stock

Componentes & términos relacionados

Texas Instruments OPA2544T OPA2544TG3 OPA2544 dual operational amplifier operational amplifier analog integrated circuit power amplifier high-voltage amplifier high-current amplifier TO-220-11 11-lead TO-220 through-hole package surface-mount device semiconductor motor control solenoid driver programmable power supply audio amplification test and measurement feedback network output current thermal dissipation common-mode input range gain bandwidth product
RFQ de presupuesto rápido
Complete los detalles — nuestro equipo de ventas responderá en un plazo de 24 horas
Número de pieza Fabricante Encapsulado QTY Precio objetivo Total
✓
¡Presupuesto enviado!

Responderemos a su correo electrónico en un plazo de 24 horas

1
RFQ enviado
2
Presupuesto recibido
3
Pedido realizado
4
Pago
5
Enviado
6
Entregado
Ver detalles del RFQ