NXP Semiconductors

PCA9510D - 400kHz Hot-Swappable I2C Buffer | NXP

MPN: PCA9510D ✓ সক্রিয়
8-SO, 8 pins Package 400 kHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PCA9510D সারাংশ

The NXP Semiconductors PCA9510D is a hot-swappable I2C-bus and SMBus buffer operating at up to 400 kHz in an 8-pin SO package. It enables I/O-card insertion into a live backplane while control circuitry delays connection of the card-side bus until the backplane is idle or a STOP command is detected. This prevents bus contention and corruption of data and clock signals during card insertion.

An I2C bus buffer is a specialized interface IC that electrically isolates or buffers two bus segments while preserving bidirectional serial-data and clock communication. The PCA9510D belongs to the interface-IC hierarchy used in hot-plug, expansion-card, server, and embedded backplane systems. Its SMBus compatibility extends the same isolation concept to systems using SMBus-based management or control functions.

The device operates as a single-channel, 400 kHz bus buffer. Its key function is controlled connection between the backplane and card sides: the card is not connected during an active bus transaction, reducing the risk of contention when either bus segment is active. The 8-SO package supports conventional surface-mount PCB assembly, while the PCA9510D,118 ordering suffix identifies a specific distributor orderable variant.

The PCA9510D is intended for systems in which modules may be inserted or removed without powering down the entire host. NXP describes the device as providing bidirectional bus buffering once the connection is permitted. The relevant engineering benefit is operational continuity and reduced insertion disturbance rather than longer trace distance or level translation; no galvanic isolation or voltage-level translation should be inferred from the hot-swap function.

Typical uses include server and workstation expansion cards, telecommunications equipment, industrial controller modules, test systems, and embedded backplanes that expose an I2C or SMBus connection to removable hardware. The PCA9510D is particularly relevant when the card connector may be populated or serviced while the host remains active and the bus must not be corrupted during insertion.

Design attention should focus on system enable control, power sequencing, bus idle detection, and the electrical behavior of the card-side connector. The protection mechanism depends on observing a valid bus condition before connecting the two segments. Designers should therefore verify startup states, fault conditions, and connector sequencing rather than treating the PCA9510D as an ordinary passive I2C buffer.

This page combines the manufacturer function description, package and frequency information, orderable part references, and practical hot-plug guidance to support PCB, sourcing, and replacement decisions. It also distinguishes verified device identity from specifications that require confirmation against the manufacturer datasheet before electrical sign-off.

এর জন্য ড্রপ-ইন বিকল্প PCA9510D — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PCA9510D (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Lifecycle Status, Product Type.

NXP Semiconductors
Package: 8-TSSOP (SOP)
Lifecycle Status: Active (per NXP product page)
এর সাথে তুলনা করুন PCA9510D →
NXP Semiconductors
Package: 8-pin SOIC
Lifecycle Status: Discontinued
Product Type: Hot-swappable I2C and SMBus bus buffer
এর সাথে তুলনা করুন PCA9510D →

PCA9510ADP,118

✅ ড্রপ-ইন
NXP Semiconductors
📦 8-SO
Hot swappable I2C-bus and SMBus bus buffer · 1 buffered channel (SDA + SCL bidirectional) · I2C-bus, SMBus · 400 kHz · 8-TSSOP (SOP) · Surface Mount · Yes - connection deferred until stop command or bus idle without card-side bus contention · Yes, on output sides

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PCA9511D

✅ ড্রপ-ইন
NXP Semiconductors
📦 8-SO
Hot-swappable I2C and SMBus bus buffer · 1 channel · 2.7 V to 5.5 V · 400 kHz · I2C and SMBus · Yes · 8-pin SOIC · Surface mount

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PCA9510D বিশেষণ

Product Type Hot-swappable I2C-bus and SMBus buffer
Bus Interface I2C and SMBus
Maximum Bus Frequency 400 kHz
Channel Count 1 channel
Data Direction Bidirectional
প্যাকেজ 8-SO, 8 pins
Package Type Gull-wing surface-mount SO
মাউন্টিং টাইপ Surface mount
Temperature Grade Industrial
Hot-Plug Control STOP-command or bus-idle connection control
Terminal Count 8 terminals
Product Form Rectangular surface-mount package

PCA9510D gull-wing surface-mount so পিন কনফিগারেশন গাইড

PCA9510D (gull-wing surface-mount so প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

PCA9510D-এর জন্য gull-wing surface-mount so প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCA9510D.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PCA9510D এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Hot-Plug Server Expansion Cards, Industrial Controller Module Backs, Telecommunications Backplane Cards, Embedded Test and Measurement Modules, Removable Communication Modules, General I2C and SMBus Card Insertion.

🖥️

Hot-Plug Server Expansion Cards

The PCA9510D fits an I2C or SMBus management connection on a removable server expansion card because it delays connection of the card-side bus until the backplane reaches a safe idle state or a STOP command is detected. At the 400 kHz class operating point, the buffer supports normal management-bus traffic while preventing an inserted card from immediately driving an active bus. The system must still sequence connector power and validate bus capacitance, pull-up strength, and startup behavior. Its principal benefit is reduced insertion contention without requiring the complete host system to power down.

🏭

Industrial Controller Module Backs

The PCA9510D is useful between an industrial controller backplane and a removable I/O module that communicates through I2C or SMBus. Controlled connection prevents the module from joining the bus during an active transaction, while the single-channel bidirectional architecture preserves data and clock communication between the two segments. At up to 400 kHz, it accommodates common low-speed management interfaces. Designers should confirm the industrial temperature limits, supply range, and startup-state behavior against the manufacturer datasheet before deploying it in temperature-extreme or safety-related equipment.

🌐

Telecommunications Backplane Cards

The PCA9510D can isolate a card-side I2C or SMBus segment from a live telecommunications backplane during field replacement or inventory expansion. Its STOP-command or bus-idle connection logic reduces the risk of corrupting management traffic while a card is inserted, and the 400 kHz operating class is appropriate for supervisory and configuration interfaces. The device does not by itself solve power hot-plug sequencing, connector bounce, or ground-transient problems; those functions must be designed around it. Validate bus loading and signal integrity across the complete backplane length.

🔧

Embedded Test and Measurement Modules

The PCA9510D is appropriate when a plug-in test module accesses an I2C or SMBus instrumentation bus that remains active during module replacement. The controlled connection sequence reduces bus contention and helps preserve communication on the host side. Its 400 kHz class rating supports many configuration, status, and low-bandwidth measurement-control interfaces without implying support for faster high-speed I2C modes. The test chassis should control module power before enabling bus communication and should verify that the bus-idle detector behaves correctly under low-speed traffic and abnormal card states.

📡

Removable Communication Modules

The PCA9510D can support serviceable radio, network, and data-acquisition modules that expose an I2C or SMBus configuration interface. Bidirectional buffering preserves command and status traffic, while the delayed-connection feature prevents the module from driving the host bus during mechanical insertion. The 400 kHz class operating point is suitable for configuration and status traffic rather than payload streaming. Engineering validation should cover connector sequencing, bus pull-ups, card-side power-up timing, and the time required for the buffer to recognize a valid idle condition.

🧩

General I2C and SMBus Card Insertion

The PCA9510D is appropriate for a general embedded expansion interface where cards may be inserted while the system remains powered and the I2C or SMBus is active. Unlike a continuously connected buffer, the PCA9510D waits for a STOP command or bus-idle condition before joining the two bus segments, reducing contention during insertion. The 8-SO package supports standard surface-mount assembly, and the 400 kHz operating class fits conventional control buses. Confirm the exact pin functions, supply requirements, and electrical limits in the manufacturer datasheet before layout release.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

PCA9510A Same-family hot-swappable bus-buffer option ব্যবহৃত হয়: Hot-Plug Server Expansion Cards, Industrial Controller Module Backs, Telecommunications Backplane Cards, Embedded Test and Measurement Modules, Removable Communication Modules PCA9511D NXP Semiconductors ব্যবহৃত হয়: Hot-Plug Server Expansion Cards, Telecommunications Backplane Cards, General I2C and SMBus Card Insertion PCA9510D,118 Orderable PCA9510D variant ব্যবহৃত হয়: Industrial Controller Module Backs, Embedded Test and Measurement Modules, General I2C and SMBus Card Insertion PCA9510D,112 Additional orderable PCA9510D suffix ব্যবহৃত হয়: Removable Communication Modules
What is the PCA9510D used for?
The PCA9510D is a hot-swappable I2C-bus and SMBus buffer that allows an I/O card to be inserted into a live backplane without corrupting the data or clock buses. According to the NXP product page, control circuitry prevents connection of the card to the backplane until a STOP command or bus-idle condition occurs. The device supports bidirectional buffering at up to 400 kHz.
Where can I download the PCA9510D datasheet PDF?
The PCA9510D datasheet and product information are available through the official NXP product page at https://www.nxp.com/part/PCA9510D. Use the datasheet link or documents section on that page to obtain the current manufacturer PDF. The PCA9510A family datasheet is also listed by NXP at https://www.nxp.com/docs/en/data-sheet/PCA9510A.pdf, but confirm device-specific ordering and electrical details for PCA9510D.
What is the maximum operating frequency of the PCA9510D?
The PCA9510D supports I2C and SMBus operation at up to 400 kHz. NXP identifies the device as a single-channel, 400 kHz buffer in an 8-SO package. This value describes the supported bus rate; it does not mean that every bus length, connector, pull-up arrangement, or capacitive loading condition can operate at 400 kHz without margin.
How does the PCA9510D prevent bus contention during card insertion?
The PCA9510D prevents immediate contention by keeping the card-side and backplane-side connections isolated until its control circuitry detects a STOP command or a bus-idle condition. NXP states that the backplane is connected to the card only at a safe bus state. This controlled sequencing is the defining advantage over a continuously connected passive I2C repeater.
What package does the PCA9510D use?
The PCA9510D is supplied in an 8-SO surface-mount package, also described as an 8-pin gull-wing SOP package. The manufacturer product page identifies the family as PCA9510D, while distributor records show the orderable suffix PCA9510D,118. The package footprint has 8 terminals and is represented by the standard SOIC-8 package diagram.
Where can I buy the PCA9510D online?
Use the Request a Quote form on this page to request the PCA9510D and obtain current commercial terms. The form is the appropriate channel for confirming unit availability, quantity requirements, orderable packaging suffixes, and lead time. Avoid selecting a different suffix or package without first confirming that it matches the footprint and quantity planned for the PCB.
What is the price of the PCA9510D?
Current commercial pricing for the PCA9510D is handled through the Request a Quote form on this page. The form allows buyers to specify quantity, package suffix, target date, and shipment requirements without relying on a stale static price. It is the recommended route for confirming current availability, pricing, and compatible orderable part numbers.
What is the lead time and stock status for the PCA9510D?
Current stock status and lead time for the PCA9510D should be confirmed through the Request a Quote form on this page. Provide the required quantity, exact package suffix, date code requirement, and destination country when requesting the quotation. This approach produces a current response for the specific order configuration rather than implying that generic catalog availability applies to every suffix.
PCA9510D vs PCA9510A - which one should I select?
The PCA9510A and PCA9510D belong to the same NXP hot-swappable bus-buffer family, and the manufacturer identifies both as 400 kHz-class I2C/SMBus buffer products. The PCA9510A datasheet describes the same controlled connection behavior. Final interchangeability should be confirmed from the datasheet pin table and ordering information because the revision or suffix can include device-specific qualification and packing details.
Is the PCA9510D suitable for a hot-plug server expansion card?
The PCA9510D is suitable for a hot-plug server or workstation expansion card when the interface uses I2C or SMBus and the system requires controlled connection during card insertion. Its key benefit is that the backplane and card are connected only after a STOP command or bus-idle condition is detected. Power-up behavior, connector sequencing, and bus capacitance still require system-level validation.
When should I choose PCA9510D instead of a standard I2C buffer?
Choose the PCA9510D when a removable card may be connected to an operating I2C or SMBus backplane and the design must prevent active-bus contention during insertion. A conventional buffer may continuously connect its two sides and therefore does not provide the same controlled hot-plug behavior. The PCA9510D is preferable when controlled isolation timing is central to the system requirement.
What can replace the PCA9510D?
The closest same-family replacement identified for the PCA9510D is the NXP PCA9510A, which shares the hot-swappable I2C/SMBus buffer function and 400 kHz-class operating point. PCA9511-family devices may also be considered for closely related buffering applications, but the pinout and connection-control behavior must be checked before substitution. No cross-brand drop-in replacement is established by the available cross-reference records.
Can PCA9511D replace PCA9510D on the same PCB?
The PCA9511D should not be treated as an automatic PCA9510D drop-in replacement. Both devices appear in the PCA9510/PCA9511 hot-swappable bus-buffer family, but the available records do not establish every pin-level function as identical. Compare the complete manufacturer pin descriptions, enable logic, bus-side connections, and package dimensions against the PCA9510D schematic before approving a substitution.
What are the key specifications of PCA9510D that engineers should know?
The PCA9510D is a single-channel, bidirectional I2C and SMBus buffer rated for operation at up to 400 kHz in an 8-SO industrial-temperature package. Its central feature is controlled connection during hot-plug operation: the card-side bus remains disconnected until the backplane is idle or a STOP command occurs. Supply voltage, temperature limits, capacitance, and propagation delay should be taken from the manufacturer datasheet.
Does the PCA9510D provide voltage-level translation or galvanic isolation?
The PCA9510D is described by NXP as a hot-swappable I2C-bus and SMBus buffer, not as a galvanic isolation device. The available manufacturer information confirms controlled bus connection and bidirectional buffering, but it does not establish independent side supply domains or level translation. Use the datasheet power and pin descriptions to determine whether the two bus sides share a supply reference.
What is the best cross-brand equivalent for the PCA9510D?
No cross-brand drop-in equivalent is established by the available component cross-reference information. The closest documented route is an NXP same-family device such as the PCA9510A, subject to a complete pinout and functionality review. Rather than assume that a generic I2C buffer is interchangeable, obtain the manufacturer data sheet and verify the hot-plug control behavior, 8-SO footprint, 400 kHz rating, and bidirectional bus connections.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCA9510D — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the PCA9510D when a removable I2C or SMBus card may be inserted into an operating backplane and the design requires controlled connection at a safe bus state. Its STOP-command or bus-idle logic is the central functional requirement and should not be replaced with a generic buffer lacking equivalent hot-plug behavior. PCA9510A is the closest same-family option because it shares the 400 kHz-class hot-swappable-buffer function and 8-SO format, making it the first part to evaluate when sourcing a second-source device. PCA9511D may also serve closely related hot-swappable bus-buffer designs, but its enable and pin functions must be compared against the PCA9510D schematic before it is treated as a drop-in replacement. Confirm supply voltage, temperature limits, propagation delay, and all eight pin assignments using the manufacturer datasheet before PCB or production release.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য PCA9510A PCA9511D
Brand NXP Semiconductors NXP Semiconductors NXP Semiconductors
Package 8-SO 8-SO 8-SO
Product Type Hot-swappable I2C-bus and SMBus buffer Hot-swappable I2C-bus and SMBus buffer Hot-swappable I2C-bus and SMBus buffer
Maximum Bus Frequency 400 kHz 400 kHz 400 kHz
Mounting Type Surface mount Surface mount Surface mount

মূল পার্থক্যসমূহ

  • Controlled connection protects an active backplane during card insertion (বনামPCA9511D)
  • Same 400 kHz bus-class and bidirectional function (বনামPCA9510A)
  • Same 8-SO footprint family supports compact interface layouts (বনামPCA9510A)

ডিজাইন নোট

Separate connector-power sequencing from bus-connection sequencing. The PCA9510D controls when the card-side and backplane-side bus segments are connected, but it does not guarantee that every card supply rail is ready when the connection occurs. Hold the card in reset or keep its I2C drivers disabled until its local supply is stable. Check the device and connected-card supply limits against the manufacturer datasheet before fixing the system voltage plan.

Place the PCA9510D close to the connector or card-side interface so the isolated segment remains short, while routing the backplane-side connection directly toward the host bus. Keep ground returns continuous and use the package pin definition from the manufacturer datasheet when assigning tracks. Do not assume that the enable and bus-side pins of PCA9510A and PCA9511D are interchangeable solely because both devices use an 8-SO outline.

Validate pull-up placement, bus capacitance, rise-time behavior, and the 400 kHz operating limit across the complete interconnect rather than only the PCB traces. During insertion, connector bounce and card-side power-up can create transient bus states. Confirm that the backplane is idle or a STOP command is detected before the controlled connection takes effect, and use oscilloscope measurements to verify clock and data integrity at the connector and remote endpoint.

Do not substitute a generic I2C buffer for the PCA9510D when hot-plug protection is required. A standard repeater may connect the two bus sides continuously and therefore lacks the PCA9510D's STOP-command or bus-idle connection control. Also avoid treating the device as galvanic isolation or automatic voltage-level translation; verify supply domains and logic thresholds from the manufacturer documentation.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device is an industrial-temperature interface IC, but no device-specific RoHS, REACH, lead-free, halogen-free, or conflict-minerals declaration is stated for PCA9510D. AEC-Q100 is not applicable to this non-automotive interface-device category.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

PCA9510D datasheet PCA9510D datasheet pdf PCA9510D pinout PCA9510D 8-SO package PCA9510D 400kHz I2C buffer PCA9510D hot swappable bus buffer PCA9510D equivalent PCA9510D replacement PCA9510D vs PCA9510A PCA9510D price PCA9510D stock NXP PCA9510D

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

NXP Semiconductors PCA9510D PCA9510A PCA9511D PCA9510D,118 PCA9510D,112 I2C bus buffer SMBus buffer hot-swappable interface interface IC bidirectional bus isolation backplane STOP command bus idle detection 400 kHz bus frequency 8-SO package SOIC-8 family surface mount industrial temperature grade RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন