Texas Instruments

PCM1604PT - 24-Bit 6-Channel 200kHz Audio DAC | Texas Instruments

MPN: PCM1604PT ✓ সক্রিয়
Separate analog and digital supplies Vdss 48-LQFP, 7 mm × 7 mm Package 200 kHz Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PCM1604PT সারাংশ

Texas Instruments PCM1604PT is a 24-bit, six-channel digital-to-analog converter for audio signal generation, supporting operation up to 200 kHz and serial I2S data transfer. The device combines six DAC channels, analog and digital supply connections, and a 48-pin LQFP package measuring 7 mm by 7 mm. According to the manufacturer datasheet, its dynamic range reaches 105 dB, making it suitable for multichannel consumer, automotive, and industrial audio systems.

An audio DAC is a mixed-signal integrated circuit that converts digitally encoded audio samples into proportional analog voltages. In the signal hierarchy, the PCM1604PT belongs to the digital-to-analog converter category within ADC/DAC and mixed-signal semiconductor devices. Six integrated channels can reduce the number of external converter packages needed in surround-sound, home-theater, automotive audio, and multichannel instrument systems.

The 24-bit interface supports high-resolution digital audio, while the 200 kHz capability provides additional sampling-rate headroom for professional and premium consumer equipment. The 105 dB dynamic-range figure represents the converter's signal-to-noise and distortion performance, making channel-to-channel noise differences an important consideration in multiway audio systems. Both analog and digital supply domains are identified in the device documentation, allowing power architecture and grounding to be planned separately.

The PCM1604 architecture is intended for synchronous serial audio systems using I2S-format data. System-level clocking must preserve the required relationship between the audio serial clock, bit clock, frame sync, and master clock. The 48-LQFP footprint offers more interconnect capacity than a small leadless package, supporting six analog output channels as well as digital data, clock, control, and power connections.

Typical applications include 5.1 and 7.1-channel home-theater receivers, automotive infotainment audio systems, active speaker networks, digital mixing consoles, surround-sound processors, and multichannel audio interface equipment. Selection should consider the 24-bit resolution, six-channel integration, 200 kHz operating capability, 105 dB dynamic range, and the exact 48-LQFP footprint against board area and signal-routing requirements.

Keep analog output routing short and away from digital clock and I2S data traces. Use a quiet analog ground strategy, decouple the analog and digital supply domains locally, and follow the pin-description and layout guidance in the manufacturer datasheet. Verify output-filter component values and amplifier coupling requirements for the intended sample rate rather than copying values between unrelated codec families.

This page combines channel and interface characteristics, package-focused alternatives, application guidance, comparison parameters, and PCB design cautions to support faster component selection and implementation of the PCM1604PT in multichannel audio equipment.

এর জন্য ড্রপ-ইন বিকল্প PCM1604PT — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PCM1604PT (একই form factor এবং footprint) — পার্থক্য রয়েছে Converter Type, Package, Resolution, Dynamic Range, Maximum Sampling Rate.

Texas Instruments
Converter Type: 24-bit, 6-channel enhanced multilevel delta-sigma digital-to-analog converter
Package: 48-LQFP (7mm x 7mm)
Maximum Sampling Rate: 96kHz
এর সাথে তুলনা করুন PCM1604PT →
Texas Instruments
Converter Type: Digital-to-analog converter
Package: 48-LQFP (7x7 mm)
Resolution: 24 bit
এর সাথে তুলনা করুন PCM1604PT →
Texas Instruments
Converter Type: 24-bit 6-channel enhanced multilevel delta-sigma DAC
Dynamic Range: 105 dB typical
Maximum Sampling Rate: 192 kHz

PCM1604Y

✅ ড্রপ-ইন
Texas Instruments
📦 48-LQFP, 7 mm x 7 mm
Digital-to-analog converter · Enhanced multilevel delta-sigma · 24 bit · 192 kHz · 6 channels · I2S · 48-LQFP (7x7 mm) · 48 terminals

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PCM1604PTG4

✅ ড্রপ-ইন
📦 48-LQFP, 7 mm x 7 mm
0% change in the stated package, terminal compatibility, and principal functional characteristics; ordering suffix differs

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

PCM1604Y/2K

✅ ড্রপ-ইন
Texas Instruments
📦 48-LQFP, 7 mm x 7 mm
24-bit 6-channel enhanced multilevel delta-sigma DAC · 6 channels · 24 bits · 192 kHz · 105 dB typical · 104 dB typical · 0.0018% typical · CMOS

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PCM1600Y

✅ ড্রপ-ইন
Texas Instruments
📦 48-LQFP, 7 mm x 7 mm
24-bit, 6-channel enhanced multilevel delta-sigma digital-to-analog converter · 24 bits · 6 channels · 96kHz · MSB-first, binary two's-complement · Standard, I2S, and left-justified · 16, 18, 20, or 24 bits · +5V

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PCM1604PT সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Number of DAC Channels 6 channels
রেজোলিউশন 24 bits
Maximum Sampling Frequency 200 kHz
Data Interface I2S serial interface
Dynamic Range 105 dB
অপারেটিং তাপমাত্রার পরিসর -25 °C to +85 °C
প্যাকেজ 48-LQFP, 7 mm × 7 mm
মাউন্টিং টাইপ Surface mount
Supply Architecture Separate analog and digital supplies
Device Type Audio digital-to-analog converter
Process Technology CMOS monolithic integrated circuit
Package Form Small-outline flat QFP
Digital Audio Data Format I2S serial format
RoHS স্ট্যাটাস unknown
REACH Status unknown
AEC-Q100 Qualification not_applicable
Lead-Free Status unknown
Halogen-Free Status unknown
Minimum Operating Temperature -25 °C
Maximum Operating Temperature +85 °C
Manufacturer Texas Instruments

PCM1604PT small-outline flat qfp পিন কনফিগারেশন গাইড

PCM1604PT (small-outline flat qfp প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

PCM1604PT-এর জন্য small-outline flat qfp প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCM1604PT.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PCM1604PT এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Home-Theater Surround-Sound Receiver, Automotive Infotainment Audio, Active Multiway Speaker Network, Digital Mixing Console, Professional Audio Interface, Multichannel Instrument Amplifier.

🎧

Home-Theater Surround-Sound Receiver

The PCM1604PT fits a home-theater receiver that requires multiple synchronized analog output channels rather than a collection of separate converters. Its six 24-bit DAC channels provide a consolidated conversion stage, while operation up to 200 kHz supports high-resolution source formats. Place the device near the output-filter and amplifier stages, route all digital interfaces from the audio processor, and verify that the receiver’s master, bit, and frame clocks satisfy the manufacturer timing requirements. The 105 dB dynamic-range figure helps preserve low-level dialogue and surround effects, although system noise is also influenced by the analog filters, reference network, amplifier, and power supply.

🚗

Automotive Infotainment Audio

PCM1604PT can serve as the multichannel conversion stage in an automotive infotainment or cockpit-audio design that distributes several digital audio streams. Six 24-bit channels support front, rear, center, and additional zone outputs from a common converter, and the -25 °C to +85 °C operating range covers many ambient conditions. The I2S interface connects naturally to an audio processor, but the complete design must verify clocking, ground separation, electromagnetic interference, and connector-routing requirements. Automotive qualification documentation should be confirmed before production because AEC-Q100 qualification is not established for this MPN by the available records.

🔊

Active Multiway Speaker Network

The PCM1604PT is appropriate for a digitally controlled active-speaker network requiring several low-noise analog drive channels. Six 24-bit DAC channels can feed separate amplifier channels, while 105 dB dynamic range supports the signal-to-noise headroom expected in premium audio equipment. Place the converter close to the output filters and amplifier inputs, use a low-impedance analog return path, and keep clock and I2S traces away from sensitive output nodes. The 200 kHz maximum rate offers design headroom, but crossover filters, amplifier stability, thermal design, and the system master clock must support the intended operating bandwidth.

🎚️

Digital Mixing Console

PCM1604PT can provide the final digital-to-analog conversion stage of a compact digital mixer or monitor controller. Six 24-bit channels offer sufficient outputs for main monitor mixes, cue paths, or surround monitoring, while the I2S interface supports direct connection to a digital audio engine. The 105 dB dynamic-range figure is important in mixing environments where low-level monitoring content must remain audible beneath the noise floor. Use deterministic clock distribution, isolate analog outputs from mixer-control traces, and validate output filters for the selected sample rate. The 48-LQFP footprint should be planned into the board outline because its seven-by-seven-millimeter body is larger than a small two-channel converter.

🎙️

Professional Audio Interface

The PCM1604PT is suited to a professional multichannel audio interface requiring high-resolution output conversion and numerous balanced or unbalanced analog outputs. Six 24-bit channels can serve as monitor outputs, auxiliary sends, or multichannel line outputs, and the converter’s 105 dB dynamic range supports low-noise monitoring. I2S timing must be coordinated with the interface controller, while the analog outputs require suitable reconstruction filters and low-noise amplifiers. Pay particular attention to ground partitioning between digital and analog domains and to the routing of high-frequency clock signals. The 200 kHz capability accommodates high-rate studio workflows, subject to the complete signal-chain specifications.

🎸

Multichannel Instrument Amplifier

PCM1604PT can support a multichannel electronic instrument or amplifier requiring centralized digital-to-analog conversion. Its six 24-bit channels allow multiple mixer buses or speaker channels to be generated from one synchronized converter, while I2S provides a straightforward connection to a digital sound engine. The 105 dB dynamic-range specification helps maintain signal integrity across quiet and loud passages, and operation up to 200 kHz provides room for high-resolution source material. Implement the device with local supply bypassing, short analog traces, and output filters matched to the amplifier input architecture. Confirm grounding and clock-source arrangements to prevent switching or digital coupling from appearing in the audible output.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

PCM1604PT Texas Instruments ব্যবহৃত হয়: Home-Theater Surround-Sound Receiver, Automotive Infotainment Audio, Active Multiway Speaker Network, Digital Mixing Console, Professional Audio Interface, Multichannel Instrument Amplifier PCM1605PT Related six-channel 24-bit PCM audio converter family member ব্যবহৃত হয়: Home-Theater Surround-Sound Receiver, Automotive Infotainment Audio, Active Multiway Speaker Network, Digital Mixing Console, Professional Audio Interface, Multichannel Instrument Amplifier
What is the PCM1604PT?
The PCM1604PT is a Texas Instruments six-channel, 24-bit audio digital-to-analog converter that supports serial I2S data transfer and operation up to 200 kHz. According to the manufacturer datasheet, it provides 105 dB dynamic range and uses a 48-LQFP package measuring 7 mm by 7 mm. It is intended for systems that require several synchronized audio output channels in one converter package.
How many DAC channels and bits does PCM1604PT have?
The PCM1604PT contains six digital-to-analog converter channels, each supporting 24-bit audio data. The manufacturer datasheet describes the device as a CMOS monolithic converter with six output channels and an I2S serial interface. Its 24-bit word length is suitable for high-resolution multichannel audio, while the six-channel integration can simplify clock and data distribution compared with separate single-channel DAC packages.
What is the maximum sampling frequency of PCM1604PT?
The PCM1604PT supports a maximum sampling frequency of 200 kHz. According to the manufacturer datasheet, this gives the converter sufficient rate capability for high-resolution audio and leaves timing headroom above common CD-rate and professional 48 kHz operating points. The complete audio path must still be designed to avoid bandwidth, jitter, filtering, and amplifier limitations that would prevent the system from realizing the converter's full capability.
Where can I download the PCM1604PT datasheet PDF?
The PCM1604PT datasheet is available from the Texas Instruments product documentation for the PCM1604 family. Use the manufacturer datasheet to confirm the 48-pin assignments, I2S timing requirements, analog output configuration, supply limits, decoupling recommendations, and package drawing. The product title identifies the family as a 24-bit, six-channel DAC, and the device is also described as a CMOS monolithic integrated circuit.
Where can I find the PCM1604PT pinout?
The PCM1604PT pinout is defined in the pin-configuration section of the manufacturer datasheet for the PCM1604 family. The device uses a 48-LQFP package, so assignments cover six analog output channels, digital audio data and clocks, control signals, supply rails, and ground connections. Assign PCB tracks directly from that table rather than inferring pin numbers from another multichannel DAC or a different QFP package.
What are the key specifications of PCM1604PT that engineers should know?
The key PCM1604PT specifications are six 24-bit DAC channels, a 200 kHz maximum sampling frequency, I2S serial audio, 105 dB dynamic range, and a 48-LQFP 7 mm × 7 mm package. The operating temperature range is -25 °C to +85 °C. These characteristics place the device in the multichannel high-resolution audio DAC category while allowing direct comparison with other converters on channel count, interface, accuracy, and footprint.
Is PCM1604PT suitable for home-theater audio?
Yes, PCM1604PT is suitable for home-theater and surround-sound systems that need multiple synchronized analog audio outputs. Six integrated 24-bit channels can support multichannel processing stages, and the 200 kHz rate capability accommodates high-resolution source formats. The system still requires appropriate output filtering, channel routing, low-noise amplification, clock generation, and digital-to-analog boundary layout.
Is PCM1604PT suitable for automotive audio systems?
The PCM1604PT can be evaluated for automotive infotainment audio because it provides six 24-bit channels, I2S connectivity, a 105 dB dynamic-range figure, and a -25 °C to +85 °C operating range. However, the manufacturer information does not establish AEC-Q100 qualification for this orderable MPN. An automotive design should require qualified documentation and assess electrical, environmental, and lifecycle requirements before production release.
What is the difference between PCM1604PT and PCM1605?
The PCM1604PT belongs to the same six-channel, 24-bit PCM1604-family converter group described in the manufacturer documentation as supporting circuitry in a small QFP-48 package. PCM1605 is identified as a related family member, but its exact interface, sampling-rate, and pin-compatibility details must be checked against its own datasheet. Do not substitute PCM1605 solely because it belongs to the same family without confirming every pin and electrical parameter.
What is the best AKM equivalent for PCM1604PT?
No AKM equivalent can be confirmed as a pin-to-pin replacement for PCM1604PT from the available technical records. The target uses a 48-LQFP footprint, six 24-bit DAC channels, an I2S interface, and separate analog and digital supply connections. A candidate must match that footprint and pinout while meeting the required 200 kHz rate, 105 dB-class dynamic performance, supply levels, and output architecture.
When should I choose PCM1604PT over a single-channel DAC?
Choose PCM1604PT when the design requires several synchronized audio outputs and can justify a 48-LQFP footprint. Integrating six 24-bit channels can simplify channel count, reduce the number of converter packages, and centralize digital clock and data routing. A single-channel DAC may be preferable for a compact, cost-sensitive, or non-synchronized design where only one output is required and board area dominates.
When should I choose PCM1604PT over a lower-channel-count multichannel DAC?
Choose PCM1604PT when six integrated outputs and support for operation up to 200 kHz are more valuable than minimizing package size. Its 48-LQFP package requires more routing resources than smaller converter packages, so a two-channel or four-channel alternative may simplify layout when the application only needs those outputs. Compare the required channel count, audio format, dynamic range, clock architecture, and available board area before selecting the converter.
What can replace PCM1604PT?
PCM1604PT requires a true drop-in replacement to match the 48-LQFP footprint, pin assignments, I2S interface, six-channel architecture, supply arrangement, and key audio performance. The cross-reference results do not identify a verified pin-compatible substitute, so no replacement is promoted as drop-in. Use the manufacturer cross-reference search or evaluate a candidate against the PCM1604 datasheet and PCB footprint before calling it a replacement.
Can PCM1605PT replace PCM1604PT?
PCM1605PT cannot be declared a drop-in replacement for PCM1604PT without a definitive pin-by-pin comparison. The family documentation identifies both devices as related six-channel 24-bit converters in small QFP-48 packages, which makes PCM1605 worth reviewing. Check digital clock definitions, mode controls, analog output assignments, supply pins, decoupling, and exposed or unused connections in the PCM1605 datasheet before substitution.
Where can I buy PCM1604PT and what is its price?
Use the Request a Quote form on this page to request PCM1604PT availability, current pricing, minimum order quantity, and lead time. The part is identified as a Texas Instruments 48-LQFP audio DAC, and the manufacturer family information supports its use in multichannel audio systems. Current commercial terms can change, so a written quotation is the appropriate way to confirm the exact suffix and delivery requirement.
What is the lead time and stock status for PCM1604PT?
Request current stock and lead-time confirmation through the Request a Quote form on this page. The target is the Texas Instruments PCM1604PT in a 48-LQFP 7 mm × 7 mm package, and orderable availability can vary by region, quantity, and shipment date. Provide the required quantity and target schedule with the request so the commercial response reflects the intended production commitment.
Is PCM1604PT in stock?
PCM1604PT inventory should be confirmed through the Request a Quote form on this page rather than inferred from an outdated product page. The requested MPN is the tape-and-reel 48-LQFP ordering code identified by Texas Instruments. Stock and lead time can fluctuate, so request the exact quantity, shipping destination, and required delivery date to obtain an actionable commitment.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCM1604PT — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose PCM1604PT when an audio system requires six synchronized, 24-bit analog outputs and benefits from integrating them into one converter package. Its 200 kHz maximum rate, 105 dB dynamic range, I2S interface, and 48-LQFP footprint are well suited to surround-sound receivers, automotive infotainment, active speakers, professional interfaces, and multichannel instrument systems. Select a smaller two-channel or four-channel converter when channel count is low and board area is the dominant constraint. A single-channel DAC is preferable for isolated or inexpensive outputs. Do not treat a related PCM160-family member or a competitor converter as a drop-in replacement unless its pinout, clocking, supply arrangement, output architecture, and key performance parameters match the PCM1604 datasheet. For new layouts, confirm the exact 48-pin assignments, analog output filtering, clock requirements, and decoupling recommendations before releasing the PCB.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
DAC Channel Count 6 channels
Resolution 24 bits
Maximum Sampling Frequency 200 kHz
Dynamic Range 105 dB
Data Interface I2S serial interface
Operating Temperature Range -25 °C to +85 °C
Package 48-LQFP, 7 mm × 7 mm
Supply Architecture Separate analog and digital supplies
Brand Texas Instruments

মূল পার্থক্যসমূহ

  • Six high-resolution DAC channels in one package (বনামSingle-channel DAC)
  • Higher sampling-rate capability (বনামCommon 48 kHz audio DAC)
  • High dynamic range for multichannel conversion (বনামLower-channel-count multichannel DAC)

ডিজাইন নোট

Keep the six analog output paths short and symmetrical, and separate them from I2S data, bit-clock, frame-sync, and master-clock routing. Place the converter near the reconstruction-filter and output-amplifier stages, use a continuous ground reference beneath the analog section, and avoid routing digital clocks beneath the QFP footprint. This arrangement limits digital-to-analog coupling and helps preserve the device's 105 dB dynamic-range capability.

Decouple the analog and digital supply pins locally with the capacitance and placement specified in the manufacturer datasheet. Place each decoupling capacitor close to its associated power pin and use a low-impedance ground return so switching current does not share sensitive analog paths. Treat analog and digital domains as separate distribution branches where the reference design recommends it, and check supply sequencing and absolute maximum limits before powering the board.

Design the digital audio interface around the relationship between the master clock, bit clock, frame sync, and I2S data. Use source-synchronous routing for data, clock, and frame-sync signals, keep their lengths closely matched, and provide return-path continuity beneath the traces. Validate setup and hold timing with the actual source-device output delay and board skew rather than relying only on nominal clock-rate calculations.

Do not assign PCB nets from another 48-pin audio converter or assume that a related PCM160-family member is interchangeable. Verify every pin against the PCM1604 manufacturer datasheet, including analog outputs, digital clocks, control functions, supply rails, and unused connections. Also confirm the output-filter topology and component values for the intended sampling rate; a correct DAC footprint does not by itself guarantee compatible analog signal behavior.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The available product information identifies Texas Instruments as the manufacturer and a 48-LQFP package, but it does not establish the requested environmental or material-compliance statuses. Confirm production documentation with the manufacturer before making a compliance declaration.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

PCM1604PT datasheet PCM1604PT datasheet pdf PCM1604PT pinout PCM1604PT specifications Texas Instruments PCM1604PT PCM1604PT 24-bit 6-channel DAC PCM1604PT 200 kHz I2S PCM1604PT 48-LQFP PCM1604PT home theater DAC PCM1604PT automotive audio PCM1604PT equivalent PCM1604PT replacement PCM1604PT price PCM1604PT stock PCM1604PT application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments PCM1604PT PCM1604 PCM1605PT 24-bit DAC digital-to-analog converter audio DAC mixed-signal IC six-channel converter I2S serial audio interface 200 kHz sampling frequency 105 dB dynamic range 48-LQFP LQFP family surface-mount package CMOS home-theater receiver automotive infotainment active speaker digital mixing console professional audio interface analog supply digital supply reconstruction filter
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন