PCM1604PT - 24-Bit 6-Channel 200kHz Audio DAC | Texas Instruments
MPN: PCM1604PT ✓ Hoạt độngPCM1604PT Tóm tắt
An audio DAC is a mixed-signal integrated circuit that converts digitally encoded audio samples into proportional analog voltages. In the signal hierarchy, the PCM1604PT belongs to the digital-to-analog converter category within ADC/DAC and mixed-signal semiconductor devices. Six integrated channels can reduce the number of external converter packages needed in surround-sound, home-theater, automotive audio, and multichannel instrument systems.
The 24-bit interface supports high-resolution digital audio, while the 200 kHz capability provides additional sampling-rate headroom for professional and premium consumer equipment. The 105 dB dynamic-range figure represents the converter's signal-to-noise and distortion performance, making channel-to-channel noise differences an important consideration in multiway audio systems. Both analog and digital supply domains are identified in the device documentation, allowing power architecture and grounding to be planned separately.
The PCM1604 architecture is intended for synchronous serial audio systems using I2S-format data. System-level clocking must preserve the required relationship between the audio serial clock, bit clock, frame sync, and master clock. The 48-LQFP footprint offers more interconnect capacity than a small leadless package, supporting six analog output channels as well as digital data, clock, control, and power connections.
Typical applications include 5.1 and 7.1-channel home-theater receivers, automotive infotainment audio systems, active speaker networks, digital mixing consoles, surround-sound processors, and multichannel audio interface equipment. Selection should consider the 24-bit resolution, six-channel integration, 200 kHz operating capability, 105 dB dynamic range, and the exact 48-LQFP footprint against board area and signal-routing requirements.
Keep analog output routing short and away from digital clock and I2S data traces. Use a quiet analog ground strategy, decouple the analog and digital supply domains locally, and follow the pin-description and layout guidance in the manufacturer datasheet. Verify output-filter component values and amplifier coupling requirements for the intended sample rate rather than copying values between unrelated codec families.
This page combines channel and interface characteristics, package-focused alternatives, application guidance, comparison parameters, and PCB design cautions to support faster component selection and implementation of the PCM1604PT in multichannel audio equipment.
Bộ thay thế dễ dàng lắp đặt cho PCM1604PT — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM1604PT (cùng hình factor và footprint) — khác nhau ở Converter Type, Package, Resolution, Dynamic Range, Maximum Sampling Rate.
PCM1604Y
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1604PTG4
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
PCM1604Y/2K
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1600Y
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM1604PT Tỷ lệ tối đa & tính chất điện
| Number of DAC Channels | 6 channels |
| Độ phân giải | 24 bits |
| Maximum Sampling Frequency | 200 kHz |
| Data Interface | I2S serial interface |
| Dynamic Range | 105 dB |
| Khoảng nhiệt độ hoạt động | -25 °C to +85 °C |
| Hộp | 48-LQFP, 7 mm × 7 mm |
| Kiểu lắp đặt | Surface mount |
| Supply Architecture | Separate analog and digital supplies |
| Device Type | Audio digital-to-analog converter |
| Process Technology | CMOS monolithic integrated circuit |
| Package Form | Small-outline flat QFP |
| Digital Audio Data Format | I2S serial format |
| Trạng thái RoHS | unknown |
| REACH Status | unknown |
| AEC-Q100 Qualification | not_applicable |
| Lead-Free Status | unknown |
| Halogen-Free Status | unknown |
| Minimum Operating Temperature | -25 °C |
| Maximum Operating Temperature | +85 °C |
| Manufacturer | Texas Instruments |
Hướng dẫn cấu hình chân PCM1604PT small-outline flat qfp
Cấu hình chân cho PCM1604PT (small-outline flat qfp gói). Thành phần số hiệu này có chân đầu vào, đầu ra và nguồn cung cấp. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết cấu hình chân bù, bù trừ và chân kích hoạt. Hoàn hảo cho điều kiện tín hiệu và mạch khuếch đại.
Không có dữ liệu chân cụ thể sẵn có cho PCM1604PT.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM1604PT phù hợp cho 6 Áp dụngs: Home-Theater Surround-Sound Receiver, Automotive Infotainment Audio, Active Multiway Speaker Network, Digital Mixing Console, Professional Audio Interface, Multichannel Instrument Amplifier.
Home-Theater Surround-Sound Receiver
The PCM1604PT fits a home-theater receiver that requires multiple synchronized analog output channels rather than a collection of separate converters. Its six 24-bit DAC channels provide a consolidated conversion stage, while operation up to 200 kHz supports high-resolution source formats. Place the device near the output-filter and amplifier stages, route all digital interfaces from the audio processor, and verify that the receiver’s master, bit, and frame clocks satisfy the manufacturer timing requirements. The 105 dB dynamic-range figure helps preserve low-level dialogue and surround effects, although system noise is also influenced by the analog filters, reference network, amplifier, and power supply.
Được đề xuất
Automotive Infotainment Audio
PCM1604PT can serve as the multichannel conversion stage in an automotive infotainment or cockpit-audio design that distributes several digital audio streams. Six 24-bit channels support front, rear, center, and additional zone outputs from a common converter, and the -25 °C to +85 °C operating range covers many ambient conditions. The I2S interface connects naturally to an audio processor, but the complete design must verify clocking, ground separation, electromagnetic interference, and connector-routing requirements. Automotive qualification documentation should be confirmed before production because AEC-Q100 qualification is not established for this MPN by the available records.
Được đề xuất
Active Multiway Speaker Network
The PCM1604PT is appropriate for a digitally controlled active-speaker network requiring several low-noise analog drive channels. Six 24-bit DAC channels can feed separate amplifier channels, while 105 dB dynamic range supports the signal-to-noise headroom expected in premium audio equipment. Place the converter close to the output filters and amplifier inputs, use a low-impedance analog return path, and keep clock and I2S traces away from sensitive output nodes. The 200 kHz maximum rate offers design headroom, but crossover filters, amplifier stability, thermal design, and the system master clock must support the intended operating bandwidth.
Được đề xuất
Digital Mixing Console
PCM1604PT can provide the final digital-to-analog conversion stage of a compact digital mixer or monitor controller. Six 24-bit channels offer sufficient outputs for main monitor mixes, cue paths, or surround monitoring, while the I2S interface supports direct connection to a digital audio engine. The 105 dB dynamic-range figure is important in mixing environments where low-level monitoring content must remain audible beneath the noise floor. Use deterministic clock distribution, isolate analog outputs from mixer-control traces, and validate output filters for the selected sample rate. The 48-LQFP footprint should be planned into the board outline because its seven-by-seven-millimeter body is larger than a small two-channel converter.
Được đề xuất
Professional Audio Interface
The PCM1604PT is suited to a professional multichannel audio interface requiring high-resolution output conversion and numerous balanced or unbalanced analog outputs. Six 24-bit channels can serve as monitor outputs, auxiliary sends, or multichannel line outputs, and the converter’s 105 dB dynamic range supports low-noise monitoring. I2S timing must be coordinated with the interface controller, while the analog outputs require suitable reconstruction filters and low-noise amplifiers. Pay particular attention to ground partitioning between digital and analog domains and to the routing of high-frequency clock signals. The 200 kHz capability accommodates high-rate studio workflows, subject to the complete signal-chain specifications.
Được đề xuất
Multichannel Instrument Amplifier
PCM1604PT can support a multichannel electronic instrument or amplifier requiring centralized digital-to-analog conversion. Its six 24-bit channels allow multiple mixer buses or speaker channels to be generated from one synchronized converter, while I2S provides a straightforward connection to a digital sound engine. The 105 dB dynamic-range specification helps maintain signal integrity across quiet and loud passages, and operation up to 200 kHz provides room for high-resolution source material. Implement the device with local supply bypassing, short analog traces, and output filters matched to the amplifier input architecture. Confirm grounding and clock-source arrangements to prevent switching or digital coupling from appearing in the audible output.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM1604PT — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này |
|---|---|
| DAC Channel Count | 6 channels |
| Resolution | 24 bits |
| Maximum Sampling Frequency | 200 kHz |
| Dynamic Range | 105 dB |
| Data Interface | I2S serial interface |
| Operating Temperature Range | -25 °C to +85 °C |
| Package | 48-LQFP, 7 mm × 7 mm |
| Supply Architecture | Separate analog and digital supplies |
| Brand | Texas Instruments |
Bảo phân biệt quan trọng
- Six high-resolution DAC channels in one package (vsSingle-channel DAC)
- Higher sampling-rate capability (vsCommon 48 kHz audio DAC)
- High dynamic range for multichannel conversion (vsLower-channel-count multichannel DAC)
Ghi chú thiết kế
Keep the six analog output paths short and symmetrical, and separate them from I2S data, bit-clock, frame-sync, and master-clock routing. Place the converter near the reconstruction-filter and output-amplifier stages, use a continuous ground reference beneath the analog section, and avoid routing digital clocks beneath the QFP footprint. This arrangement limits digital-to-analog coupling and helps preserve the device's 105 dB dynamic-range capability.
Decouple the analog and digital supply pins locally with the capacitance and placement specified in the manufacturer datasheet. Place each decoupling capacitor close to its associated power pin and use a low-impedance ground return so switching current does not share sensitive analog paths. Treat analog and digital domains as separate distribution branches where the reference design recommends it, and check supply sequencing and absolute maximum limits before powering the board.
Design the digital audio interface around the relationship between the master clock, bit clock, frame sync, and I2S data. Use source-synchronous routing for data, clock, and frame-sync signals, keep their lengths closely matched, and provide return-path continuity beneath the traces. Validate setup and hold timing with the actual source-device output delay and board skew rather than relying only on nominal clock-rate calculations.
Do not assign PCB nets from another 48-pin audio converter or assume that a related PCM160-family member is interchangeable. Verify every pin against the PCM1604 manufacturer datasheet, including analog outputs, digital clocks, control functions, supply rails, and unused connections. Also confirm the output-filter topology and component values for the intended sampling rate; a correct DAC footprint does not by itself guarantee compatible analog signal behavior.
Thông tin tuân thủ
The available product information identifies Texas Instruments as the manufacturer and a 48-LQFP package, but it does not establish the requested environmental or material-compliance statuses. Confirm production documentation with the manufacturer before making a compliance declaration.