Texas Instruments

PCM1773PW - 24-Bit Stereo Audio DAC | Texas Instruments

MPN: PCM1773PW ✓ সক্রিয়
16-pin TSSOP (PW), 4.40 mm width Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PCM1773PW সারাংশ

Texas Instruments PCM1773PW is a 24-bit low-power stereo digital-to-analog converter with an integrated line-out amplifier, 98 dB SNR, support for I2S audio data, and a 16-pin TSSOP package. The converter operates across a 0°C to 70°C temperature range and uses an enhanced multilevel architecture with noise shaping and multilevel amplitude quantization for low-distortion audio reproduction.

A stereo DAC is a semiconductor that converts digital audio samples into left and right analog voltage signals. It belongs to the digital-to-analog converter and audio signal-conversion hierarchy, where it bridges digital audio sources, such as decoders, receivers, and digital audio processors, with analog line-level amplification, mixing, recording, or loudspeaker-driver circuits. The PCM1773 family integrates the converter core and line-out circuitry to reduce external analog signal-path complexity.

The PCM1773PW supports 24-bit digital audio data and sampling rates up to 50 kSPS, as identified by the manufacturer product page and distributor records. Its 98 dB signal-to-noise ratio is a principal performance figure for evaluating quiet stereo output. Hardware control provides a straightforward way to manage the line-output operating mode, while the integrated line-out amplifier simplifies connections to downstream analog audio circuitry.

Texas Instruments describes the data converters as CMOS monolithic integrated circuits using an enhanced multilevel architecture. This architecture combines noise shaping with multilevel amplitude quantization to improve dynamic performance and reduce quantization-related distortion. The PCM1773PW package is a 16-pin TSSOP, designated PW by Texas Instruments, making it suitable for compact consumer and industrial audio equipment where conventional surface-mount assembly is preferred.

Typical uses include stereo audio decoding, digital television and set-top-box audio paths, multimedia equipment, portable consumer electronics, and other systems requiring a two-channel audio DAC. Designers can use the integrated line-out stage to reduce the number of external analog components, although the actual output topology, gain, loading, and bypass configuration must follow the manufacturer application guidance.

PCB implementation should preserve short, low-noise analog connections and route digital audio signals away from sensitive output nodes. Input and output decoupling, grounding, exposed analog sections, and the treatment of digital supply returns should follow the manufacturer datasheet layout and component recommendations. Because audio converters can reproduce digital-source noise and distortion directly, the complete power, clock, and source-chain design affects the final listening result.

This product page consolidates the manufacturer specifications, package information, source links, and application guidance for PCM1773PW into an engineering-focused reference. It also distinguishes the target device from family-related choices, identifies where additional technical details are required, and provides selection criteria for stereo DAC and line-out designs.

এর জন্য ড্রপ-ইন বিকল্প PCM1773PW — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PCM1773PW (একই form factor এবং footprint) — পার্থক্য রয়েছে Package.

Texas Instruments
Package: 16-pin TSSOP (PW)
এর সাথে তুলনা করুন PCM1773PW →

PCM1773PWR

✅ ড্রপ-ইন
📦 16-pin TSSOP (PW)
Same PCM1773 device and 16-pin TSSOP footprint; orderable suffix differs, with no quantified electrical difference

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

PCM1773PWRG4

✅ ড্রপ-ইন
📦 16-pin TSSOP (PW)
Same PCM1773 electrical family and 16-pin TSSOP footprint; Green ordering suffix differs, with no quantified electrical difference

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

PCM1772PW

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 16-pin TSSOP (PW)
Stereo audio digital-to-analog converter · 24 bit · 50 kSPS · 98 dB · I2S · 2 channels · Stereo line-out · Software control

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PCM1773PW সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Converter Type Stereo digital-to-analog converter
রেজোলিউশন 24 bit
Maximum Sampling Rate 50 kSPS
Digital Audio Interface I2S
Signal-to-Noise Ratio 98 dB
Number of Audio Channels 2 channels
Integrated Output Stage Stereo line-out amplifier
Line-Out Control Hardware control
Converter Architecture Enhanced multilevel architecture with noise shaping and multilevel amplitude quantization
Process Technology CMOS
অপারেটিং তাপমাত্রার পরিসর 0°C to +70°C
প্যাকেজ 16-pin TSSOP (PW), 4.40 mm width
মাউন্টিং টাইপ Surface mount
Device Classification Low-voltage, low-power stereo audio DAC
Analog Output Type Line-out

PCM1773PW 16-pin tssop (pw), 4.40 mm width পিন কনফিগারেশন গাইড

PCM1773PW (16-pin tssop (pw), 4.40 mm width প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

PCM1773PW-এর জন্য 16-pin tssop (pw), 4.40 mm width প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCM1773PW.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PCM1773PW এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Digital Television Audio Output, Multimedia Player Analog Audio, Portable Consumer Audio, Set-Top Box Stereo Audio, Digital Audio Interface Card, Stereo Audio Monitoring System.

📺

Digital Television Audio Output

The PCM1773PW fits a stereo digital television audio path that presents compatible 24-bit I2S data at rates up to 50 kSPS. Its 98 dB SNR specification supports a low-noise conversion stage, while the integrated stereo line-out circuitry can reduce the number of external analog buffers. The converter accepts digital source data and produces left and right line-level analog outputs for subsequent amplification, mixing, or monitoring. Designers should verify the television's clocking, polarity, and audio-format requirements against the PCM1773 interface table before layout release. A clean supply, short analog traces, and a return-current plan that keeps digital switching paths separate from the line outputs remain essential for preserving the converter's noise performance.

🎧

Multimedia Player Analog Audio

The PCM1773PW is appropriate for a compact multimedia player that receives I2S audio from a decoder or digital audio processor and needs two analog channels. It converts up to 24-bit digital samples at a maximum rate of 50 kSPS and includes a line-out amplifier stage. This integration can shorten the analog signal path compared with a discrete converter-plus-buffer design. The main design consideration is ensuring that the digital source's sample rate, word length, and clock relationship match the converter configuration. Because the device operates over 0°C to 70°C, the enclosing product should maintain that temperature range or use a suitably qualified alternate device. Layout should separate digital clock and data routes from the analog output and ground structures.

📱

Portable Consumer Audio

The PCM1773PW can serve as the stereo DAC in a compact consumer audio product where board area and analog-path simplicity are important. Its 24-bit conversion capability, 98 dB SNR, and integrated line-out stage suit low-voltage digital audio systems that feed headphones, powered speakers, or an external analog amplifier. The 16-pin TSSOP package is compatible with surface-mount manufacturing and occupies less board area than many multi-section analog solutions. Because the device's specified operating range is 0°C to 70°C, it should be used within that environmental envelope or replaced with a part rated for the product's full temperature range. Power-supply selection and analog filtering must be designed alongside the converter to control startup, channel imbalance, and output noise.

📡

Set-Top Box Stereo Audio

The PCM1773PW is well matched to a set-top-box design that requires a stereo I2S-to-analog conversion stage with integrated line-out capability. The 24-bit converter supports source data rates up to 50 kSPS, and the 98 dB SNR figure provides a useful baseline for a clean broadcast-audio output path. Using the integrated line-out block can reduce component count and simplify board-space allocation in a consumer enclosure. The digital interface must be checked for the decoder's master-clock and bit-alignment arrangement, while the analog output must satisfy the downstream amplifier's input and coupling requirements. A low-impedance reference return and short output traces help prevent digital switching energy from appearing in the left and right outputs.

🔧

Digital Audio Interface Card

The PCM1773PW can be used on a small digital audio interface card that accepts an I2S stream and exposes stereo line outputs. Its 24-bit architecture, 50 kSPS maximum rate, and integrated line-out amplifier make it appropriate for a focused two-channel conversion module. The 16-pin TSSOP package simplifies routing on a compact PCB, although the system still requires stable analog supplies, suitable input and output filtering, and clock generation compatible with the source. The 0°C to 70°C rating defines the environmental envelope for this implementation. Designers should follow the manufacturer reference layout and keep the digital audio connector, clock source, and converter return currents away from the analog output traces to minimize coupling and preserve signal quality.

🎚️

Stereo Audio Monitoring System

The PCM1773PW can support a two-channel monitoring system that receives digital audio over I2S and produces balanced-looking or unbalanced line-level outputs according to the manufacturer circuit. The converter's 98 dB SNR provides a low-noise starting point, while its integrated line-out circuitry can feed a monitoring amplifier or mixer. For professional-style monitoring, the design must still address ground-loop prevention, output protection, channel matching, and the bandwidth required by the source material. The device's 24-bit input capability supports high-resolution source formats, but it does not create information that is absent from the incoming digital stream or improve the performance of a poorly implemented analog output stage. Use the manufacturer reference circuit to select component values and output configuration.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

PCM1773PWR Same PCM1773 converter family and TSSOP footprint ব্যবহৃত হয়: Digital Television Audio Output, Multimedia Player Analog Audio, Portable Consumer Audio, Set-Top Box Stereo Audio, Stereo Audio Monitoring System PCM1773PWRG4 Same PCM1773 family with Green ordering suffix ব্যবহৃত হয়: Digital Audio Interface Card
What is the PCM1773PW?
The PCM1773PW is a 24-bit, low-power stereo audio digital-to-analog converter with an integrated line-out amplifier from Texas Instruments. It supports I2S audio data, sampling rates up to 50 kSPS, and operates in a 16-pin TSSOP package. According to the Texas Instruments PCM1773 product page, the device also includes support circuitry for a complete stereo audio conversion path.
What are the key specifications of PCM1773PW that engineers should know?
The PCM1773PW is specified as a 24-bit stereo DAC with I2S support, a maximum sampling rate of 50 kSPS, 98 dB SNR, and an integrated line-out amplifier. The Texas Instruments product listing identifies the PW package as a 16-pin TSSOP and gives an operating range of 0°C to 70°C. Its enhanced multilevel architecture combines noise shaping with multilevel amplitude quantization.
What is the signal-to-noise ratio of PCM1773PW?
The PCM1773PW has a signal-to-noise ratio of 98 dB, according to the Texas Instruments part-details listing for the PW package. This figure describes the ratio of the desired audio signal to unwanted noise and is an important selection parameter when the DAC output feeds a quiet analog line stage. Actual system noise also depends on the digital source, clocking, grounding, and downstream amplifier.
Where can I download the PCM1773PW datasheet PDF?
The official PCM1773 datasheet and supporting technical information are available from the Texas Instruments PCM1773 product page at https://www.ti.com/product/PCM1773. The PDF is also indexed through the PCM1773PW datasheet result at https://www.alldatasheet.com/datasheet-pdf/pdf/839311/TI1/PCM1773PW.html. Use the manufacturer document for final pin, voltage, timing, and application information.
Where can I find the PCM1773PW pinout?
The PCM1773PW pin assignment is documented in the Texas Instruments PCM1773 datasheet and its 16-pin PW package diagram. The part is a 16-pin TSSOP, and the manufacturer page provides links to the device documentation and package information. A complete numbered pin list is not reproduced on this page, so use the pin-description table in the manufacturer datasheet when assigning PCB nets.
What audio formats does PCM1773PW support?
The PCM1773PW supports I2S digital audio data and operates as a two-channel stereo converter. Texas Instruments describes the PCM1773 family as a 24-bit stereo DAC with integrated line-out circuitry and enhanced multilevel conversion. The exact master-clock relationship, bit-alignment options, and supported data-word formats should be selected from the format table in the manufacturer datasheet.
Is PCM1773PW suitable for a digital television audio output?
The PCM1773PW is suitable for a digital television line-output path when the source supplies compatible I2S audio and the design accepts a 24-bit stereo DAC with a 50 kSPS maximum rate. Its integrated line-out amplifier can reduce the required external analog circuitry. Confirm the television's audio format, sampling rate, clock polarity, and output level before finalizing the interface.
PCM1773PW vs PCM1772PW: which is the better stereo DAC?
The PCM1773PW is the better choice when the design specifically requires its documented 98 dB SNR and hardware-controlled line-out behavior. The PCM1772 belongs to the same TI PCM177x CMOS family and is available in TSSOP-16 and VQFN-20 packages, but its exact interface and control details must be compared with the required design. Use the manufacturer family documentation before treating it as a drop-in substitution.
What is the difference between PCM1773PW and PCM1773PWR?
PCM1773PW and PCM1773PWR identify orderable versions of the Texas Instruments PCM1773 device, with the PW package family providing the 16-pin TSSOP configuration. The final suffix can encode orderable packing or lead-finish information, so the manufacturer ordering table must be checked for the exact production and delivery format. For PCB compatibility, confirm that the selected orderable part retains the same 16-pin TSSOP footprint.
When should I choose PCM1773PW over another 24-bit stereo DAC?
Choose PCM1773PW when the design needs 24-bit I2S conversion, a maximum sampling rate of 50 kSPS, 98 dB SNR, integrated line-out amplification, and a compact 16-pin TSSOP implementation. It is particularly suitable for compact stereo audio products where an integrated output stage simplifies the analog path. Choose another DAC only when its interface, voltage, output topology, or thermal performance better satisfies the system requirements.
What is the best drop-in replacement for PCM1773PW?
The closest documented same-package choice is a separately orderable PCM1773 variant using the same 16-pin TSSOP footprint, such as PCM1773PWR, after checking the manufacturer ordering details. Texas Instruments also identifies PCM1772 as a related family member, but its control and interface functions must be verified before substitution. No cross-brand drop-in replacement is established by the cited manufacturer and distributor information.
Can PCM1771PWR replace PCM1773PW without PCB changes?
PCM1771PWR should not be treated as an automatic replacement for PCM1773PW. It is listed in the same 16-pin TSSOP package family and is identified as a 24-bit stereo DAC, but a shared package does not by itself prove pin-to-pin compatibility. Verify supply voltage, digital interface, clock requirements, line-out control, pinout, and electrical limits against the manufacturer data for both devices.
Where can I buy PCM1773PW and check its lead time?
Use the Request a Quote form on this page to request current PCM1773PW pricing, stock status, minimum order quantity, and lead time for the exact Texas Instruments part number and PW package. The cited listings identify PCM1773PW as a 16-pin TSSOP stereo DAC, but availability and commercial terms can change. Submit the desired quantity and shipment destination with the quote request.
What is the price of PCM1773PW?
Current pricing for PCM1773PW is handled through the Request a Quote form on this page rather than a static price statement. The request should identify the exact PCM1773PW orderable part number, quantity, delivery target, and packaging preference. This avoids applying a price associated with a different suffix, reel format, or order quantity to the target device.
Is PCM1773PW in stock and what is its lead time?
Stock and lead time should be confirmed through the Request a Quote form on this page for the exact PCM1773PW part number. Some distributor listings identify the component as in stock, but inventory is time-sensitive and does not establish a guaranteed allocation for a production order. The quote response should state available quantity, minimum order quantity, and the expected shipment schedule.
Does PCM1773PW need an external line-output amplifier?
The PCM1773PW includes stereo line-out circuitry, so it can reduce the need for a separate output buffer when the selected configuration supports the required signal level and load. According to the Texas Instruments product page, the integrated block is part of the PCM1773 device. The manufacturer application information should still be checked for output-mode settings, external component values, and load limitations.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCM1773PW — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose PCM1773PW for a compact stereo audio design that requires 24-bit I2S conversion, a maximum sampling rate of 50 kSPS, 98 dB SNR, hardware-controlled line-out operation, and a 16-pin TSSOP package. Its integrated line-out stage is especially useful when reducing external analog circuitry is a priority. PCM1773PWR and PCM1773PWRG4 are same-device ordering options for users who need a different ordering suffix or packing designation; confirm the manufacturer ordering table before procurement. Consider PCM1772PW only after checking its control, interface, output, and electrical details against the PCM1773 requirements. Do not select a cross-brand DAC solely because it uses a 16-pin TSSOP package; verify the complete pinout, digital timing, voltage range, clocking, output topology, and lifecycle requirements. For environments outside 0°C to 70°C, select a suitably rated device rather than relying on the PCM1773PW without environmental qualification.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য PCM1773PWR PCM1773PWRG4 PCM1772PW
Package 16-pin TSSOP (PW) 16-pin TSSOP (PW) 16-pin TSSOP (PW) 16-pin TSSOP (PW)
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Converter Type Stereo DAC with integrated line-out amplifier Stereo DAC with integrated line-out amplifier Stereo DAC with integrated line-out amplifier Stereo DAC with line-out circuitry

মূল পার্থক্যসমূহ

  • Integrated stereo line-out circuitry (বনামPCM1772PW)
  • Documented 98 dB SNR (বনামPCM1772PW)
  • 24-bit conversion at up to 50 kSPS (বনামPCM1773PWR)

ডিজাইন নোট

Route the I2S data, bit clock, and master clock away from the left and right line outputs, and place the converter's decoupling capacitors at the associated supply pins. Keep the analog output traces short and place any configured output filters close to the device. The manufacturer pin-description and layout guidance should determine the exact component placement because a complete net-level layout cannot be established from the product-page information alone.

Do not assume that every related PCM177x orderable part is an automatic substitute. Confirm the pin names, digital interface mode, clock polarity, supply requirements, line-out control method, and maximum sampling rate for the exact suffix being considered. The same 16-pin TSSOP outline alone does not prove that every family member has identical functional behavior or timing requirements.

Use a continuous ground reference beneath the device and avoid routing digital return currents beneath the analog output section. A common digital ground can be appropriate, but high-current clock and switching-node returns should be kept away from the converter's sensitive analog pins. Validate the completed design with an oscilloscope or audio analyzer for clock timing, output idle behavior, channel matching, and unwanted digital noise.

Estimate the converter's dissipation from its actual analog and digital supply voltages, output load, and quiescent current using the electrical characteristics in the manufacturer datasheet. The published product information does not state the maximum supply voltage or dissipated power, so those values must not be assumed. Keep the TSSOP within the specified 0°C to +70°C ambient range and provide adequate PCB copper area under the package.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The cited product information does not state compliance declarations for RoHS, REACH, AEC-Q100, lead-free construction, halogen-free construction, or conflict-minerals reporting.

ডেটা যাচাই করা হয়েছে: 2026-11-10 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

PCM1773PW datasheet PCM1773PW pinout PCM1773PW datasheet pdf Texas Instruments PCM1773PW PCM1773PW 24 bit stereo DAC PCM1773PW 50 kSPS I2S PCM1773PW 98 dB SNR PCM1773PW TSSOP-16 PCM1773PW drop-in replacement PCM1773PW vs PCM1772PW PCM1773PW price PCM1773PW stock PCM1773 audio DAC application

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments PCM1773PW PCM1773PWR PCM1773PWRG4 PCM1772PW PCM1773 stereo DAC digital-to-analog converter audio converter line-out amplifier I2S 24-bit conversion 50 kSPS 98 dB SNR enhanced multilevel architecture noise shaping multilevel amplitude quantization CMOS 16-pin TSSOP PW package surface-mount technology digital television audio consumer audio RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন