PCM1773PW - 24-Bit Stereo Audio DAC | Texas Instruments
MPN: PCM1773PW ✓ פעילPCM1773PW סקירה
A stereo DAC is a semiconductor that converts digital audio samples into left and right analog voltage signals. It belongs to the digital-to-analog converter and audio signal-conversion hierarchy, where it bridges digital audio sources, such as decoders, receivers, and digital audio processors, with analog line-level amplification, mixing, recording, or loudspeaker-driver circuits. The PCM1773 family integrates the converter core and line-out circuitry to reduce external analog signal-path complexity.
The PCM1773PW supports 24-bit digital audio data and sampling rates up to 50 kSPS, as identified by the manufacturer product page and distributor records. Its 98 dB signal-to-noise ratio is a principal performance figure for evaluating quiet stereo output. Hardware control provides a straightforward way to manage the line-output operating mode, while the integrated line-out amplifier simplifies connections to downstream analog audio circuitry.
Texas Instruments describes the data converters as CMOS monolithic integrated circuits using an enhanced multilevel architecture. This architecture combines noise shaping with multilevel amplitude quantization to improve dynamic performance and reduce quantization-related distortion. The PCM1773PW package is a 16-pin TSSOP, designated PW by Texas Instruments, making it suitable for compact consumer and industrial audio equipment where conventional surface-mount assembly is preferred.
Typical uses include stereo audio decoding, digital television and set-top-box audio paths, multimedia equipment, portable consumer electronics, and other systems requiring a two-channel audio DAC. Designers can use the integrated line-out stage to reduce the number of external analog components, although the actual output topology, gain, loading, and bypass configuration must follow the manufacturer application guidance.
PCB implementation should preserve short, low-noise analog connections and route digital audio signals away from sensitive output nodes. Input and output decoupling, grounding, exposed analog sections, and the treatment of digital supply returns should follow the manufacturer datasheet layout and component recommendations. Because audio converters can reproduce digital-source noise and distortion directly, the complete power, clock, and source-chain design affects the final listening result.
This product page consolidates the manufacturer specifications, package information, source links, and application guidance for PCM1773PW into an engineering-focused reference. It also distinguishes the target device from family-related choices, identifies where additional technical details are required, and provides selection criteria for stereo DAC and line-out designs.
חלופות תחליף ישיר עבור PCM1773PW — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PCM1773PW (אותו גורם צורה וטביעת רגל) — שונים ב Package.
PCM1773PWR
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCM1773PWRG4
✅ Drop-In📋 חלופה להתייחסות (לא בקטלוג)
PCM1772PW
✅ Drop-In ⚠️ מפרטים לא מאומתיםצור קשר לקבלת מחיר
הצג גיליון נתונים ←PCM1773PW דירוגים מרביים ומאפיינים חשמליים
| Converter Type | Stereo digital-to-analog converter |
| רזולוציה | 24 bit |
| Maximum Sampling Rate | 50 kSPS |
| Digital Audio Interface | I2S |
| Signal-to-Noise Ratio | 98 dB |
| Number of Audio Channels | 2 channels |
| Integrated Output Stage | Stereo line-out amplifier |
| Line-Out Control | Hardware control |
| Converter Architecture | Enhanced multilevel architecture with noise shaping and multilevel amplitude quantization |
| Process Technology | CMOS |
| טווח טמפרטורת פעולה | 0°C to +70°C |
| מארז | 16-pin TSSOP (PW), 4.40 mm width |
| סוג הרכבה | Surface mount |
| Device Classification | Low-voltage, low-power stereo audio DAC |
| Analog Output Type | Line-out |
מדריך תצורת פינים של PCM1773PW 16-pin tssop (pw), 4.40 mm width
תצורת פינים עבור PCM1773PW (מארזת 16-pin tssop (pw), 4.40 mm width). רכיב אנלוגי זה כולל פיני כניסה, יציאה ואספקת מתח. יש לעיין בגיליון הנתונים של היצרן לתצורות פיני איפוס היסט, פיצוי והפעלה. אידיאלי למעגלי עיצוב אותות ומגברים.
אין נתוני פריסת פינים מפורטים עבור PCM1773PW.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
PCM1773PW מתאים עבור 6 יישוםs: Digital Television Audio Output, Multimedia Player Analog Audio, Portable Consumer Audio, Set-Top Box Stereo Audio, Digital Audio Interface Card, Stereo Audio Monitoring System.
Digital Television Audio Output
The PCM1773PW fits a stereo digital television audio path that presents compatible 24-bit I2S data at rates up to 50 kSPS. Its 98 dB SNR specification supports a low-noise conversion stage, while the integrated stereo line-out circuitry can reduce the number of external analog buffers. The converter accepts digital source data and produces left and right line-level analog outputs for subsequent amplification, mixing, or monitoring. Designers should verify the television's clocking, polarity, and audio-format requirements against the PCM1773 interface table before layout release. A clean supply, short analog traces, and a return-current plan that keeps digital switching paths separate from the line outputs remain essential for preserving the converter's noise performance.
מומלץ
Multimedia Player Analog Audio
The PCM1773PW is appropriate for a compact multimedia player that receives I2S audio from a decoder or digital audio processor and needs two analog channels. It converts up to 24-bit digital samples at a maximum rate of 50 kSPS and includes a line-out amplifier stage. This integration can shorten the analog signal path compared with a discrete converter-plus-buffer design. The main design consideration is ensuring that the digital source's sample rate, word length, and clock relationship match the converter configuration. Because the device operates over 0°C to 70°C, the enclosing product should maintain that temperature range or use a suitably qualified alternate device. Layout should separate digital clock and data routes from the analog output and ground structures.
מומלץ
Portable Consumer Audio
The PCM1773PW can serve as the stereo DAC in a compact consumer audio product where board area and analog-path simplicity are important. Its 24-bit conversion capability, 98 dB SNR, and integrated line-out stage suit low-voltage digital audio systems that feed headphones, powered speakers, or an external analog amplifier. The 16-pin TSSOP package is compatible with surface-mount manufacturing and occupies less board area than many multi-section analog solutions. Because the device's specified operating range is 0°C to 70°C, it should be used within that environmental envelope or replaced with a part rated for the product's full temperature range. Power-supply selection and analog filtering must be designed alongside the converter to control startup, channel imbalance, and output noise.
מומלץ
Set-Top Box Stereo Audio
The PCM1773PW is well matched to a set-top-box design that requires a stereo I2S-to-analog conversion stage with integrated line-out capability. The 24-bit converter supports source data rates up to 50 kSPS, and the 98 dB SNR figure provides a useful baseline for a clean broadcast-audio output path. Using the integrated line-out block can reduce component count and simplify board-space allocation in a consumer enclosure. The digital interface must be checked for the decoder's master-clock and bit-alignment arrangement, while the analog output must satisfy the downstream amplifier's input and coupling requirements. A low-impedance reference return and short output traces help prevent digital switching energy from appearing in the left and right outputs.
מומלץ
Digital Audio Interface Card
The PCM1773PW can be used on a small digital audio interface card that accepts an I2S stream and exposes stereo line outputs. Its 24-bit architecture, 50 kSPS maximum rate, and integrated line-out amplifier make it appropriate for a focused two-channel conversion module. The 16-pin TSSOP package simplifies routing on a compact PCB, although the system still requires stable analog supplies, suitable input and output filtering, and clock generation compatible with the source. The 0°C to 70°C rating defines the environmental envelope for this implementation. Designers should follow the manufacturer reference layout and keep the digital audio connector, clock source, and converter return currents away from the analog output traces to minimize coupling and preserve signal quality.
מומלץ
Stereo Audio Monitoring System
The PCM1773PW can support a two-channel monitoring system that receives digital audio over I2S and produces balanced-looking or unbalanced line-level outputs according to the manufacturer circuit. The converter's 98 dB SNR provides a low-noise starting point, while its integrated line-out circuitry can feed a monitoring amplifier or mixer. For professional-style monitoring, the design must still address ground-loop prevention, output protection, channel matching, and the bandwidth required by the source material. The device's 24-bit input capability supports high-resolution source formats, but it does not create information that is absent from the incoming digital stream or improve the performance of a poorly implemented analog output stage. Use the manufacturer reference circuit to select component values and output configuration.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PCM1773PW — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PCM1773PWR | PCM1773PWRG4 | PCM1772PW |
|---|---|---|---|---|
| Package | 16-pin TSSOP (PW) | 16-pin TSSOP (PW) | 16-pin TSSOP (PW) | 16-pin TSSOP (PW) |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Converter Type | Stereo DAC with integrated line-out amplifier | Stereo DAC with integrated line-out amplifier | Stereo DAC with integrated line-out amplifier | Stereo DAC with line-out circuitry |
מבדילים עיקריים
- Integrated stereo line-out circuitry (לעומתPCM1772PW)
- Documented 98 dB SNR (לעומתPCM1772PW)
- 24-bit conversion at up to 50 kSPS (לעומתPCM1773PWR)
הערות תכנון
Route the I2S data, bit clock, and master clock away from the left and right line outputs, and place the converter's decoupling capacitors at the associated supply pins. Keep the analog output traces short and place any configured output filters close to the device. The manufacturer pin-description and layout guidance should determine the exact component placement because a complete net-level layout cannot be established from the product-page information alone.
Do not assume that every related PCM177x orderable part is an automatic substitute. Confirm the pin names, digital interface mode, clock polarity, supply requirements, line-out control method, and maximum sampling rate for the exact suffix being considered. The same 16-pin TSSOP outline alone does not prove that every family member has identical functional behavior or timing requirements.
Use a continuous ground reference beneath the device and avoid routing digital return currents beneath the analog output section. A common digital ground can be appropriate, but high-current clock and switching-node returns should be kept away from the converter's sensitive analog pins. Validate the completed design with an oscilloscope or audio analyzer for clock timing, output idle behavior, channel matching, and unwanted digital noise.
Estimate the converter's dissipation from its actual analog and digital supply voltages, output load, and quiescent current using the electrical characteristics in the manufacturer datasheet. The published product information does not state the maximum supply voltage or dissipated power, so those values must not be assumed. Keep the TSSOP within the specified 0°C to +70°C ambient range and provide adequate PCB copper area under the package.
מידע על תאימות
The cited product information does not state compliance declarations for RoHS, REACH, AEC-Q100, lead-free construction, halogen-free construction, or conflict-minerals reporting.