PCM1863DBTR - 110dB 24-Bit Stereo Audio ADC | Texas Instruments
MPN: PCM1863DBTR ✓ সক্রিয়PCM1863DBTR সারাংশ
An audio ADC is a mixed-signal integrated circuit that converts left and right analog audio signals into digital words for processing, storage, transmission, or playback. The PCM1863 belongs to the ADC/DAC category and, more specifically, to the special-purpose audio converter family. Its software-controlled architecture allows a host processor to select operating conditions and interface behavior rather than relying entirely on fixed hardware settings.
The headline specifications include 24-bit conversion resolution, two-channel operation, 192 kHz maximum sampling capability, and 110 dB dynamic range. The analog supply range shown for the DBTR ordering variant is 3.3 V to 4.2 V, while the operating temperature range is -40 °C to +125 °C. I2C and SPI support makes the device adaptable to embedded audio systems whose control architecture uses either serial protocol.
The universal front end is intended to reduce the number of external signal-conditioning components required around the converter. The related PCM186x family also supports a software-configurable PGA covering a -12 dB to +32 dB gain range. This range allows the converter to accommodate different source amplitudes while helping the system avoid an overdriven ADC input. The integrated band-gap reference further supports predictable operation of the converter’s internal reference circuitry.
Typical uses include professional audio capture, consumer audio equipment, microphone preamplifier outputs, musical-instrument interfaces, and multi-zone sound systems. In these systems, the PCM1863 can digitize stereo analog audio while a microcontroller or digital audio processor controls registers and receives samples. Its 110 dB dynamic range is particularly relevant when preserving low-level and high-level audio information within the same conversion path.
PCB implementation should prioritize short, quiet analog input routing and a stable return path for the analog supply. Place input and reference-related passive components close to their associated pins, and separate the analog section from high-current digital or switching paths where practical. Confirm the complete pin mapping and recommended application circuit in the Texas Instruments datasheet before releasing a layout.
This product page combines the PCM1863DBTR ordering information with package details, drop-in family alternatives, interface guidance, and practical selection criteria. It supports faster component evaluation while keeping design decisions anchored to the manufacturer’s published architecture and the PCM1863 product family.
এর জন্য ড্রপ-ইন বিকল্প PCM1863DBTR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
PCM1862DBTR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PCM1864DBTR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PCM1860DBTR
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PCM1863DBTR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Converter Type | 24-bit audio ADC |
| Number of Channels | 2 channels |
| Dynamic Range | 110 dB |
| Maximum Sampling Rate | 192 kSPS |
| Digital Interface | I2C and SPI |
| Analog Supply Voltage Range | 3.3 V to 4.2 V |
| অপারেটিং তাপমাত্রার পরিসর | -40 °C to +125 °C |
| Programmable Gain Range | -12 dB to +32 dB |
| Front-End Architecture | Universal front end |
| Reference | Integrated band-gap reference |
| Control Method | Software-controlled |
| প্যাকেজ | 30-pin TSSOP (DBT) |
| মাউন্টিং টাইপ | Surface mount |
| RoHS স্ট্যাটাস | Compliant |
| Integrated Multiplexer | Yes |
| Master and Slave Interface Operation | Supported |
PCM1863DBTR 30-pin tssop (dbt) পিন কনফিগারেশন গাইড
PCM1863DBTR (30-pin tssop (dbt) প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCM1863DBTR.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PCM1863DBTR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Professional Stereo Audio Capture, USB Microphone Interface, Line-Level Audio Interface, Musical Instrument Digital Interface, Active Speaker and Monitoring System, Industrial Audio Measurement.
Professional Stereo Audio Capture
The PCM1863DBTR fits stereo capture systems requiring 24-bit conversion, 110 dB dynamic range, and sampling rates up to 192 kSPS. Its two-channel architecture can digitize left and right analog outputs from a preamplifier while I2C or SPI connects the converter to a recorder controller. The software-configurable -12 dB to +32 dB PGA helps match different professional source levels. Design the analog path around the PCM186x universal front end, preserve a quiet reference network, and use the manufacturer application circuit as the basis for filtering and gain staging.
সুপারিশকৃত
USB Microphone Interface
PCM1863DBTRDBTR is suitable for a stereo USB microphone interface where analog microphone signals must be converted before a digital controller handles USB audio. Its I2C and SPI interfaces simplify connection to a dedicated audio or mixed-signal controller, while 24-bit conversion and 110 dB dynamic range support high-fidelity capture. The converter supports up to 192 kSPS, allowing the interface architecture to select an appropriate operating rate. Keep the analog input path compact, provide a clean analog return, and isolate microphone bias or power converters from the converter’s reference and supply pins.
সুপারিশকৃত
Line-Level Audio Interface
The PCM1863DBTR can serve as the ADC stage in a line-level stereo interface for consumer audio equipment, broadcast peripherals, or test instruments. Two analog channels reduce the need for multiple converters, and the universal front end provides a software-configurable -12 dB to +32 dB PGA for source-level adjustment. At rates up to 192 kSPS, the device supports high-resolution capture when the clock, digital transport, and downstream storage can handle the selected rate. Validate the input impedance, anti-alias filter, and reference layout against the PCM186x application guidance.
সুপারিশকৃত
Musical Instrument Digital Interface
PCM1863DBTR is applicable to digital musical-instrument and high-fidelity input modules that convert stereo analog sources into digital data. The 24-bit format, 110 dB dynamic range, and maximum 192 kSPS rate provide useful resolution for performance capture and monitoring systems. Its programmable PGA can help accommodate instrument-level signals when the external front end is designed correctly. Use I2C for configuration-heavy control or SPI for a higher-throughput host interface, and verify timing from the PCM186x clocking and serial-interface sections.
সুপারিশকৃত
Active Speaker and Monitoring System
An active-speaker controller can use the PCM1863DBTR to capture a balanced or unbalanced line-level reference signal and monitor it digitally. The two-channel architecture supports stereo monitoring, while 110 dB dynamic range is useful when a wide range of source amplitudes must be retained. I2C or SPI allows the same control processor to configure the converter, transfer audio data, and coordinate system behavior. Place the ADC in the quiet analog input section and route digital clock and data signals away from sensitive input and reference nodes to reduce potential coupling.
সুপারিশকৃত
Industrial Audio Measurement
The PCM1863DBTR can support industrial audio measurement and condition-monitoring equipment that requires accurate digitization of two analog signals. Its 24-bit resolution and 110 dB dynamic range provide headroom for analysis, while operation across -40 °C to +125 °C broadens the potential industrial deployment range. The software-controlled front end supports system-level gain configuration without relying on a fixed analog switch network. A reliable implementation still requires careful grounding, clock generation, input protection, and calibration of the analog signal chain.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCM1863DBTR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PCM1862DBTR | PCM1864DBTR | PCM1860DBTR |
|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | TSSOP-30 (DBT) | TSSOP-30 (DBT) | TSSOP-30 (DBT) | TSSOP-30 (DBT) |
মূল পার্থক্যসমূহ
- Two-channel 110 dB audio conversion (বনামPCM1862DBTR)
- High-resolution sampling support (বনামPCM1860DBTR)
- Interface flexibility (বনামPCM1864DBTR)
ডিজাইন নোট
Route the two analog input channels as short, matched paths and place their protection, filtering, and gain-conditioning components close to the corresponding PCM1863DBTR pins. Keep the analog reference and supply return physically separated from I2C, SPI, and clock traces. The manufacturer’s PCM186x application guidance should be used to select the exact input topology because the universal front end supports several operating arrangements.
Use a clean, low-jitter clock source for the converter and follow the PCM186x interface timing requirements for both I2C and SPI modes. Avoid routing clock and serial data through the analog input region, and observe the board-level grounding recommendations in the family documentation. Because the PCM1863DBTR supports up to 192 kSPS, verify that the source, ADC, host interface, and downstream processing path all support the selected rate.
Provide the DBTR ordering variant with a 3.3 V to 4.2 V analog supply as specified for the PCM1863DBTR, and confirm the digital supply requirement against the complete PCM186x datasheet. Place local supply bypass components close to the power pins and isolate noisy switching regulators from the analog section where the board architecture allows. Validate headroom, startup order, and decoupling values using the manufacturer’s recommended application circuit.
Do not treat another PCM186x device as automatically interchangeable merely because it uses a 30-pin TSSOP package. Before replacing PCM1863DBTR with PCM1862DBTR, PCM1864DBTR, or PCM1860DBTR, compare the pin functions, clock requirements, front-end configuration, control registers, and electrical limits. The first software release should also be tested for register defaults and data-format compatibility.
কমপ্লায়েন্স তথ্য
RoHS compliance is identified for PCM1863DBTR. No additional compliance declarations were established for this ordering option.