Texas Instruments

PCM1863DBTR - 110dB 24-Bit Stereo Audio ADC | Texas Instruments

MPN: PCM1863DBTR ✓ 啟用中
3.3 V to 4.2 V Vdss 30-pin TSSOP (DBT) Package
MOQ: 1 |

PCM1863DBTR 概覽

The Texas Instruments PCM1863DBTR is a 24-bit, two-channel software-controlled audio ADC with 110 dB dynamic range, support for sampling rates up to 192 kHz, and a 30-pin TSSOP package. It accepts analog audio through a universal front end and provides both I2C and SPI control interfaces for configuration and data transfer.

An audio ADC is a mixed-signal integrated circuit that converts left and right analog audio signals into digital words for processing, storage, transmission, or playback. The PCM1863 belongs to the ADC/DAC category and, more specifically, to the special-purpose audio converter family. Its software-controlled architecture allows a host processor to select operating conditions and interface behavior rather than relying entirely on fixed hardware settings.

The headline specifications include 24-bit conversion resolution, two-channel operation, 192 kHz maximum sampling capability, and 110 dB dynamic range. The analog supply range shown for the DBTR ordering variant is 3.3 V to 4.2 V, while the operating temperature range is -40 °C to +125 °C. I2C and SPI support makes the device adaptable to embedded audio systems whose control architecture uses either serial protocol.

The universal front end is intended to reduce the number of external signal-conditioning components required around the converter. The related PCM186x family also supports a software-configurable PGA covering a -12 dB to +32 dB gain range. This range allows the converter to accommodate different source amplitudes while helping the system avoid an overdriven ADC input. The integrated band-gap reference further supports predictable operation of the converter’s internal reference circuitry.

Typical uses include professional audio capture, consumer audio equipment, microphone preamplifier outputs, musical-instrument interfaces, and multi-zone sound systems. In these systems, the PCM1863 can digitize stereo analog audio while a microcontroller or digital audio processor controls registers and receives samples. Its 110 dB dynamic range is particularly relevant when preserving low-level and high-level audio information within the same conversion path.

PCB implementation should prioritize short, quiet analog input routing and a stable return path for the analog supply. Place input and reference-related passive components close to their associated pins, and separate the analog section from high-current digital or switching paths where practical. Confirm the complete pin mapping and recommended application circuit in the Texas Instruments datasheet before releasing a layout.

This product page combines the PCM1863DBTR ordering information with package details, drop-in family alternatives, interface guidance, and practical selection criteria. It supports faster component evaluation while keeping design decisions anchored to the manufacturer’s published architecture and the PCM1863 product family.

直接替換替代品,適用於 PCM1863DBTR — 相同封裝,腳位對腳位相容。需重新設計 PCB 的不同封裝零件不列入。

PCM1862DBTR

✅ 直接替換
📦 TSSOP-30 (DBT)
Same PCM186x family and 30-pin DBT footprint; detailed channel and electrical differences require comparison with the PCM1863DBTR datasheet.

📋 參考替代品(不在目錄中)

PCM1864DBTR

✅ 直接替換
📦 TSSOP-30 (DBT)
Same PCM186x family and 30-pin DBT footprint; front-end and channel configuration may differ from the PCM1863DBTR.

📋 參考替代品(不在目錄中)

PCM1860DBTR

✅ 直接替換
📦 TSSOP-30 (DBT)
Same PCM186x family and 30-pin DBT footprint; register, front-end, and conversion specifications must be checked before substitution.

📋 參考替代品(不在目錄中)

PCM1863DBTR 最大額定值與電氣特性

Converter Type 24-bit audio ADC
Number of Channels 2 channels
Dynamic Range 110 dB
Maximum Sampling Rate 192 kSPS
Digital Interface I2C and SPI
Analog Supply Voltage Range 3.3 V to 4.2 V
工作溫度範圍 -40 °C to +125 °C
Programmable Gain Range -12 dB to +32 dB
Front-End Architecture Universal front end
Reference Integrated band-gap reference
Control Method Software-controlled
封裝 30-pin TSSOP (DBT)
安裝類型 Surface mount
RoHS 狀態 Compliant
Integrated Multiplexer Yes
Master and Slave Interface Operation Supported

PCM1863DBTR 30-pin tssop (dbt) 腳位配置指南

PCM1863DBTR(30-pin tssop (dbt) 封裝)的腳位配置。 此類比元件具有輸入、輸出與電源腳位。偏移歸零、補償與致能腳位配置請參閱製造商資料表。適用於訊號調理與放大器電路。

PCM1863DBTR 的 30-pin tssop (dbt) 封裝腳位圖

無詳細腳位定義資料: PCM1863DBTR.

請參閱 資料表 以查看完整腳位配置。

典型應用

PCM1863DBTR 適用於 6 應用s: Professional Stereo Audio Capture, USB Microphone Interface, Line-Level Audio Interface, Musical Instrument Digital Interface, Active Speaker and Monitoring System, Industrial Audio Measurement.

🎧

Professional Stereo Audio Capture

The PCM1863DBTR fits stereo capture systems requiring 24-bit conversion, 110 dB dynamic range, and sampling rates up to 192 kSPS. Its two-channel architecture can digitize left and right analog outputs from a preamplifier while I2C or SPI connects the converter to a recorder controller. The software-configurable -12 dB to +32 dB PGA helps match different professional source levels. Design the analog path around the PCM186x universal front end, preserve a quiet reference network, and use the manufacturer application circuit as the basis for filtering and gain staging.

🎤

USB Microphone Interface

PCM1863DBTRDBTR is suitable for a stereo USB microphone interface where analog microphone signals must be converted before a digital controller handles USB audio. Its I2C and SPI interfaces simplify connection to a dedicated audio or mixed-signal controller, while 24-bit conversion and 110 dB dynamic range support high-fidelity capture. The converter supports up to 192 kSPS, allowing the interface architecture to select an appropriate operating rate. Keep the analog input path compact, provide a clean analog return, and isolate microphone bias or power converters from the converter’s reference and supply pins.

🔧

Line-Level Audio Interface

The PCM1863DBTR can serve as the ADC stage in a line-level stereo interface for consumer audio equipment, broadcast peripherals, or test instruments. Two analog channels reduce the need for multiple converters, and the universal front end provides a software-configurable -12 dB to +32 dB PGA for source-level adjustment. At rates up to 192 kSPS, the device supports high-resolution capture when the clock, digital transport, and downstream storage can handle the selected rate. Validate the input impedance, anti-alias filter, and reference layout against the PCM186x application guidance.

🎹

Musical Instrument Digital Interface

PCM1863DBTR is applicable to digital musical-instrument and high-fidelity input modules that convert stereo analog sources into digital data. The 24-bit format, 110 dB dynamic range, and maximum 192 kSPS rate provide useful resolution for performance capture and monitoring systems. Its programmable PGA can help accommodate instrument-level signals when the external front end is designed correctly. Use I2C for configuration-heavy control or SPI for a higher-throughput host interface, and verify timing from the PCM186x clocking and serial-interface sections.

🔊

Active Speaker and Monitoring System

An active-speaker controller can use the PCM1863DBTR to capture a balanced or unbalanced line-level reference signal and monitor it digitally. The two-channel architecture supports stereo monitoring, while 110 dB dynamic range is useful when a wide range of source amplitudes must be retained. I2C or SPI allows the same control processor to configure the converter, transfer audio data, and coordinate system behavior. Place the ADC in the quiet analog input section and route digital clock and data signals away from sensitive input and reference nodes to reduce potential coupling.

🏭

Industrial Audio Measurement

The PCM1863DBTR can support industrial audio measurement and condition-monitoring equipment that requires accurate digitization of two analog signals. Its 24-bit resolution and 110 dB dynamic range provide headroom for analysis, while operation across -40 °C to +125 °C broadens the potential industrial deployment range. The software-controlled front end supports system-level gain configuration without relying on a fixed analog switch network. A reliable implementation still requires careful grounding, clock generation, input protection, and calibration of the analog signal chain.

What is the PCM1863DBTR?
The PCM1863DBTR is a Texas Instruments 24-bit, two-channel software-controlled audio ADC with 110 dB dynamic range and sampling capability up to 192 kSPS. According to the Texas Instruments PCM1863 product page, it uses a universal front end and supports both I2C and SPI interfaces. The device is offered in the 30-pin TSSOP DBT package and is intended for professional, consumer, and embedded stereo audio conversion systems.
What are the key specifications of PCM1863DBTR that engineers should know?
The PCM1863DBTR combines 24-bit resolution, two audio channels, 110 dB dynamic range, and operation up to 192 kSPS in a 30-pin TSSOP package. The Texas Instruments PCM1863 product page also identifies I2C and SPI interfaces, a 3.3 V to 4.2 V analog supply range, and operation from -40 °C to +125 °C. A software-configurable -12 dB to +32 dB PGA provides additional source-level flexibility.
Where can I download the PCM1863DBTR datasheet PDF?
The official PCM1863DBTR datasheet and ordering information are available from the Texas Instruments PCM1863 product page at https://www.ti.com/product/PCM1863. The manufacturer’s PCM186x family document covers the converter architecture, electrical characteristics, pin descriptions, interface registers, and recommended application circuits. Use the DBT package drawing and ordering information to confirm that PCM1863DBTR is the correct 30-pin TSSOP ordering option.
Where can I find the PCM1863DBTR pinout?
The PCM1863DBTR pinout is published in the pin-configuration and connection diagrams within the Texas Instruments PCM186x datasheet. Because the DBT package contains 30 pins, use the 30-pin TSSOP drawing rather than a diagram for a smaller TSSOP variant. Confirm each analog input, power, ground, clock, and serial-interface signal directly against the package-specific pin table before laying out the PCB.
Can PCM1863DBTR be used for stereo microphone capture?
Yes, the PCM1863DBTR can digitize two analog audio channels, making it suitable for stereo microphone or line-level capture when the source is conditioned to the converter’s supported input range. Its -12 dB to +32 dB software-programmable PGA helps accommodate different source amplitudes. The Texas Instruments PCM186x documentation defines the supported input topology, so use that circuit as the basis for microphone biasing, anti-alias filtering, and gain staging.
Where can I buy PCM1863DBTR online?
Use the Request a Quote form on this page to request PCM1863DBTR availability, quantity pricing, and delivery information. The exact orderable manufacturer part number is PCM1863DBTR, denoting the 30-pin TSSOP DBT package. Request the packaging quantity and current lead time when placing the inquiry so the quotation reflects the required production schedule.
What is the price of PCM1863DBTR?
The current PCM1863DBTR unit price and volume pricing are presented through the Request a Quote form on this page. Submit the required quantity and packaging details to receive a current quotation tied to the exact PCM1863DBTR MPN. This avoids confusing the 30-pin DBT ordering variant with other package or temperature options in the PCM1863 family.
What is the lead time for PCM1863DBTR?
Current PCM1863DBTR lead time depends on supplier inventory, order quantity, and the requested delivery schedule. Use the Request a Quote form on this page to state the required quantity, date code requirement, and destination for a production quotation. The request should identify PCM1863DBTR exactly because related PCM186x devices can use different ordering suffixes and packages.
Is PCM1863DBTR in stock?
PCM1863DBTR inventory changes with market activity and production demand, so current stock should be confirmed through the Request a Quote form on this page. Include the required quantity, acceptable date code, and target delivery date in the request. For an active production program, also ask whether scheduled deliveries can be reserved against recurring orders.
PCM1863DBTR vs PCM1862DBTR: which is better for stereo audio?
PCM1863DBTR is the appropriate choice when the design specifically requires the PCM1863’s 110 dB dynamic range, two-channel 24-bit conversion, 192 kSPS capability, and universal front end. A PCM1862DBTR is a related family device, but its detailed electrical limits and interface differences must be checked in its own datasheet. Both are identified as DBT-package family candidates, making PCM1862DBTR relevant when checking footprint-compatible alternatives.
What is the difference between PCM1863DBTR and PCM1864DBTR?
PCM1864DBTR is a closely related PCM186x audio ADC, while PCM1863DBTR is specified as a two-channel device with a universal front end. The PCM1863DBTR supports 24-bit conversion, 110 dB dynamic range, I2C and SPI, and operation up to 192 kSPS. Before substituting PCM1864DBTR, verify channel count, front-end configuration, control-register compatibility, clock requirements, and pin-level behavior in the manufacturer documentation.
When should I choose PCM1863DBTR over PCM1862DBTR?
Choose PCM1863DBTR when the system design prioritizes its published 110 dB dynamic range, two-channel architecture, and software-programmable front end. PCM1862DBTR may be considered when its electrical ratings meet the application and the designer wants another member of the PCM186x family. The decision should include a pin-level comparison, register-map review, supply requirements, and thermal check rather than package similarity alone.
Is PCM1863DBTR suitable for a professional audio recorder?
Yes, the PCM1863DBTR is suitable for many professional and consumer stereo recording paths because it offers 110 dB dynamic range, 24-bit conversion, and up to 192 kSPS sampling. The usable result still depends on the analog front end, low-noise reference implementation, clocking, grounding, and digital transport. Use the PCM186x application guidance to design anti-alias filtering, gain control, and an interface that preserves the converter’s data integrity.
What can replace PCM1863DBTR?
The closest documented drop-in candidates are PCM1862DBTR, PCM1864DBTR, and PCM1860DBTR from the related PCM186x family, all listed in the 30-pin TSSOP ecosystem. A replacement should still be checked for exact pin compatibility, register behavior, front-end configuration, voltage ratings, and clocking requirements. Package-family compatibility supports PCB reuse, but it does not eliminate the need for a complete electrical and firmware review.
Is PCM1863DBTR the same as PCM1862DBTR?
No. PCM1863DBTR and PCM1862DBTR are related PCM186x devices, but they should not be treated as electrically or functionally identical without reviewing their individual datasheets. PCM1863DBTR is characterized by 24-bit resolution, two channels, 110 dB dynamic range, a universal front end, I2C and SPI support, and operation up to 192 kSPS. The replacement is viable only after confirming pin, register, and analog-function compatibility.
What is the best cross-brand equivalent for PCM1863DBTR?
No cross-brand drop-in equivalent is established by the available manufacturer and cross-reference information. A valid substitute would need the same 30-pin TSSOP footprint, pin-to-pin behavior, compatible analog inputs, supply requirements, clocking, and software-control architecture. Use the Request a Quote form on this page to discuss sourcing requirements, or evaluate the verified Texas Instruments PCM186x family alternatives without assuming that a generic audio ADC is electrically interchangeable.

工程參考資料,適用於 PCM1863DBTR — 比較、設計指引及合規資訊。

選型指南

Choose PCM1863DBTR when the design requires a two-channel, 24-bit audio ADC with 110 dB dynamic range, operation up to 192 kSPS, and either I2C or SPI connectivity. Its software-programmable -12 dB to +32 dB PGA also makes it appropriate when analog source levels vary and the system needs controlled gain adjustment. Consider PCM1862DBTR when its electrical specifications satisfy the design and you want another device from the same 30-pin TSSOP PCM186x family. Consider PCM1864DBTR when its front end or channel configuration better matches the system after reviewing both pin and register maps. PCM1860DBTR is another family candidate for footprint reuse, but its conversion, clocking, and software-control characteristics require individual datasheet verification. None of these alternatives should be substituted without checking the exact pin functions, supply voltages, interface timing, and system register configuration.

與替代品比較

參數 本產品 PCM1862DBTR PCM1864DBTR PCM1860DBTR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package TSSOP-30 (DBT) TSSOP-30 (DBT) TSSOP-30 (DBT) TSSOP-30 (DBT)

主要差異化特點

  • Two-channel 110 dB audio conversion (對比PCM1862DBTR)
  • High-resolution sampling support (對比PCM1860DBTR)
  • Interface flexibility (對比PCM1864DBTR)

設計說明

Route the two analog input channels as short, matched paths and place their protection, filtering, and gain-conditioning components close to the corresponding PCM1863DBTR pins. Keep the analog reference and supply return physically separated from I2C, SPI, and clock traces. The manufacturer’s PCM186x application guidance should be used to select the exact input topology because the universal front end supports several operating arrangements.

Use a clean, low-jitter clock source for the converter and follow the PCM186x interface timing requirements for both I2C and SPI modes. Avoid routing clock and serial data through the analog input region, and observe the board-level grounding recommendations in the family documentation. Because the PCM1863DBTR supports up to 192 kSPS, verify that the source, ADC, host interface, and downstream processing path all support the selected rate.

Provide the DBTR ordering variant with a 3.3 V to 4.2 V analog supply as specified for the PCM1863DBTR, and confirm the digital supply requirement against the complete PCM186x datasheet. Place local supply bypass components close to the power pins and isolate noisy switching regulators from the analog section where the board architecture allows. Validate headroom, startup order, and decoupling values using the manufacturer’s recommended application circuit.

Do not treat another PCM186x device as automatically interchangeable merely because it uses a 30-pin TSSOP package. Before replacing PCM1863DBTR with PCM1862DBTR, PCM1864DBTR, or PCM1860DBTR, compare the pin functions, clock requirements, front-end configuration, control registers, and electrical limits. The first software release should also be tested for register defaults and data-format compatibility.

合規資訊

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
無鉛
Unknown
無鹵
Unknown
衝突礦產
Unknown

RoHS compliance is identified for PCM1863DBTR. No additional compliance declarations were established for this ordering option.

資料驗證日期: 2026-11-20 — 資料由 XAIPART 元件工程團隊驗證及整理

相關搜尋

PCM1863DBTR PCM1863DBTR datasheet PCM1863DBTR datasheet pdf PCM1863DBTR pinout PCM1863DBTR specifications PCM1863DBTR equivalent PCM1863DBTR replacement PCM1863DBTR drop-in replacement PCM1863DBTR TSSOP-30 footprint Texas Instruments PCM1863DBTR PCM1863DBTR 110dB 24-bit ADC PCM1863DBTR I2C SPI PCM1863DBTR price PCM1863DBTR stock

相關元件與詞彙

Texas Instruments PCM1863DBTR PCM1863 PCM1862DBTR PCM1864DBTR PCM1860DBTR audio ADC analog-to-digital converter mixed-signal integrated circuit ADC/DAC 24-bit conversion 110 dB dynamic range 192 kSPS I2C SPI universal front end software-controlled PGA -12 dB to +32 dB gain integrated band-gap reference TSSOP-30 DBT package surface-mount integrated circuit stereo audio capture RoHS
快速報價 RFQ
請填寫完整詳細資料 — 我們的業務團隊將於 24 小時內回覆
料號 製造商 封裝 QTY 目標價格 小計
✓
報價已提交!

我們將於 24 小時內回覆您的電子郵件

1
詢價已提交
2
已收到報價
3
已下單
4
付款
5
已出貨
6
已送達
檢視詢價單詳情