Texas Instruments

PCM3001EG4 - 18-Bit Stereo Audio Codec | Texas Instruments

MPN: PCM3001EG4 ✓ সক্রিয়
28-pin SSOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PCM3001EG4 সারাংশ

Texas Instruments PCM3001EG4 is an 18-bit stereo audio codec with two ADCs, two DACs, two input channels, two output channels, and a single-ended analog input/output architecture. The device is packaged in a 28-pin SSOP and uses an 18-bit serial interface to transfer audio data between an analog audio system and a digital processor. Its integrated ADC and DAC channels make it a consolidated interface between analog microphones, line-level sources, audio amplifiers, and digital audio logic.

An audio codec is an integrated circuit that converts digital audio data into an analog output and analog audio signals into digital data. In the broader electronics hierarchy, PCM3001EG4 belongs to the audio codec class, then to interface ICs and signal-conversion semiconductors. The PCM3001EG4 combines a stereo ADC path and stereo DAC path in one package, reducing the number of separate converters required in a compact audio design.

The principal documented features are 18-bit resolution, stereo operation, two ADC channels, two DAC channels, a serial interface, single-ended analog input/output circuitry, and a 28-pin SSOP package. These features suit compact stereo audio products where both playback and recording paths are needed. The matching ADC and DAC channel count allows a system to use one codec for a two-channel input source and a two-channel output destination, subject to the signal-chain requirements defined by the manufacturer.

Technically, the codec separates analog audio conversion from digital transport. Its ADCs sample the incoming analog channels and produce digital data for the host processor, while its DACs receive digital audio and generate analog outputs. The 18-bit serial interface provides the digital link between those converters and the system controller. Designers should treat clocking, data format, analog signal levels, filtering, and power sequencing as the critical implementation considerations rather than treating the codec as a simple standalone audio block.

Typical uses include compact stereo recording systems, multimedia audio subsystems, USB or flash-based player accessories, digital mixing equipment, and embedded audio products. For portable or low-voltage systems, power consumption and analog headroom are important; for active studio equipment, channel-to-channel behavior and external analog circuitry require close attention. A microphone preamplifier may be needed when the source level is too low for direct codec input.

PCB design should keep analog input and output traces away from high-speed digital clock lines, provide the bypass and filtering components shown in the typical application circuit, and terminate unused analog inputs as directed by the manufacturer. Decoupling should be placed close to the supply pins, while the analog and digital ground strategy must follow the datasheet layout guidance. Proper grounding reduces the chance that codec switching activity couples into the reconstructed audio output.

This product page combines the published PCM3001EG4 device identity, channel architecture, resolution, package information, source links, cross-reference findings, and practical design guidance. It also distinguishes documented drop-in relationships from unsupported cross-package options so engineers can make package-aware replacement decisions without assuming that a similar audio codec is electrically interchangeable.

এর জন্য ড্রপ-ইন বিকল্প PCM3001EG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PCM3001EG4 (একই form factor এবং footprint) — পার্থক্য রয়েছে Digital Audio Interface, Package, Package Type.

Texas Instruments
Digital Audio Interface: Serial
Package Type: 28-pin SSOP
এর সাথে তুলনা করুন PCM3001EG4 →
Texas Instruments
Digital Audio Interface: Serial interface
Package: 28-pin SSOP (DB)
Package Type: Small-outline shrink pitch surface-mount package

PCM3001E

✅ ড্রপ-ইন
Texas Instruments
📦 28-pin SSOP
Stereo audio codec · 18 bit · 2 channel stereo · Single-ended · Single-ended · 2 ADC · 2 DAC · Serial

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PCM3001E/2K

✅ ড্রপ-ইন
Texas Instruments
📦 28-pin SSOP
Stereo audio codec · 18 bit · 2 channels · 2 channels · Single-ended · Single-ended · Serial interface · Hardware control

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PCM3001EG4 বিশেষণ

Codec Type Stereo audio codec
ADC Resolution 18 bit
DAC Resolution 18 bit
Number of ADCs 2 channels
Number of DACs 2 channels
Input Channels 2 channels
Output Channels 2 channels
Serial Interface 18-bit serial interface
Analog Architecture Single-ended analog input and output
প্যাকেজ 28-pin SSOP
মাউন্টিং টাইপ Surface mount
Datasheet Length 40 pages
Manufacturer Texas Instruments

PCM3001EG4 28-pin ssop পিন কনফিগারেশন গাইড

PCM3001EG4 (28-pin ssop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

PCM3001EG4-এর জন্য 28-pin ssop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCM3001EG4.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PCM3001EG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Compact Stereo Audio Interface, Digital Recording and Playback Product, Multimedia Player and Portable Audio, USB Audio Accessory, Digital Audio Mixer, Embedded Instrumentation and Control.

🎧

Compact Stereo Audio Interface

PCM3001EG4 fits a compact stereo interface because it combines two ADCs, two DACs, and an 18-bit serial data path in one 28-pin SSOP. A system can route two analog input channels into the ADC side while using the two DAC outputs for stereo playback, reducing the need for separate converter packages. The single-ended analog architecture simplifies many board layouts, but source amplitude, anti-alias filtering, output reconstruction filtering, and clocking still require careful implementation. This arrangement is useful in desktop playback products, teaching equipment, and small digital mixers where component count and board area matter.

🔧

Digital Recording and Playback Product

The dual-converter configuration makes PCM3001EG4 appropriate for products that record and replay stereo audio through a common codec. Its two ADC channels accept analog sources before conversion to 18-bit digital audio, while its two DAC channels reconstruct digital playback into analog signals. The serial interface connects the codec to a controller or digital audio engine without requiring a separate converter for each direction. Designers should budget analog gain control, input protection, low-pass filtering, and stable clocking, because the codec alone does not replace the surrounding microphone, line-level, or output-amplifier stages.

📱

Multimedia Player and Portable Audio

PCM3001EG4 can provide the conversion boundary between a digital media subsystem and analog headphone or line-level circuitry. Its two DAC channels support stereo playback, and the 18-bit interface carries the audio data to the host processor. In a portable product, the complete codec, analog filters, amplifier, and storage controller must be evaluated together for power, channel separation, noise, and output impedance. Because the device also includes two ADCs, recording functions can be added without a second converter when the enclosure, interface, and power budget permit.

🖥️

USB Audio Accessory

A USB audio accessory can use PCM3001EG4 as the analog conversion element between a USB audio controller and external input/output circuitry. The controller handles USB transport and audio-format timing while the codec performs 18-bit stereo ADC and DAC conversion through its serial interface. Layout quality is especially important in USB products because switching current from the digital controller and USB data lines can couple into sensitive analog nodes. Keep clock and data routes away from microphone inputs, use solid reference planes, and implement the filtering and decoupling arrangements shown in the manufacturer application guidance.

🎚️

Digital Audio Mixer

PCM3001EG4 is useful in a small digital mixer that needs two analog inputs and two analog outputs around a digital signal-processing stage. ADC outputs can be processed for level, routing, or effects before being returned through the DAC channels. Its integrated stereo conversion reduces the number of discrete converters on the board, although an actual mixer may still require microphone preamplification, line input conditioning, potentiometers, output amplification, and protection. Because the codec uses a serial interface, the controlling processor must support the required clocking and data format.

🏭

Embedded Instrumentation and Control

PCM3001EG4 can support embedded audio monitoring, configuration feedback, or audible event notification in an industrial control system. Two ADC channels can capture analog sensor or communication audio, and two DAC channels can generate test or status tones through external analog circuitry. Industrial environments may introduce wide temperature, vibration, and electromagnetic-interference conditions, so the exact device grade and operating limits should be verified before deployment. The analog path should be isolated from high-current switching stages, and the digital interface should use proper grounding and impedance-controlled routing.

What is the PCM3001EG4?
The PCM3001EG4 is a Texas Instruments 18-bit stereo audio codec integrating two ADCs, two DACs, two input channels, and two output channels in a 28-pin SSOP package. According to the manufacturer datasheet, it uses single-ended analog input and output circuitry with an 18-bit serial interface. It is intended for compact systems that require both analog audio capture and digital-to-analog playback.
What are the key specifications of PCM3001EG4 that engineers should know?
The PCM3001EG4 provides 18-bit resolution, two ADC channels, two DAC channels, two analog inputs, two analog outputs, a serial digital interface, and a 28-pin SSOP package. According to the Texas Instruments datasheet, its analog architecture is single-ended. These are the principal verified identity and architecture specifications; voltage, sampling-rate, noise, distortion, and temperature details should be confirmed from the corresponding electrical-characteristics tables before release.
Where can I download the PCM3001EG4 datasheet PDF?
The PCM3001EG4 datasheet PDF can be obtained from the Texas Instruments product documentation or through the manufacturer datasheet link associated with this part. The published PDF covers the device description, architecture, application information, electrical characteristics, pin configuration, and typical implementation details. Use the official Texas Instruments copy for design sign-off because the part identifier, package drawing, and ordering information must all match PCM3001EG4.
Where can I find the PCM3001EG4 pinout?
The PCM3001EG4 pinout is shown in the pin-configuration section of the manufacturer datasheet. The device is a 28-pin SSOP, so its exposed-terminal drawing and numbering must match that 28-pin package rather than a generic SSOP diagram. Assign PCB nets from the datasheet pin table and preserve the analog, digital, power, and ground pin functions exactly as shown in the application schematic.
Can PCM3001E replace PCM3001EG4?
Yes, PCM3001E is the closest documented drop-in candidate for PCM3001EG4. The cross-reference comparison states that its terminals and package are consistent, its principal functional characteristics match, and replacement does not require modification of the existing circuit. A production substitution should still be checked against the manufacturer datasheets for ordering codes, grade, temperature range, supply configuration, and production status.
What is the best drop-in replacement for PCM3001EG4?
PCM3001E is the best-supported drop-in replacement identified for PCM3001EG4 because the comparison describes consistent terminals, package compatibility, and equivalent principal performance characteristics. PCM3001E/2K is another closely related ordering variant, but suffix and packing differences must be reviewed before substitution. No cross-brand drop-in equivalent was established, so the safest replacement path is the manufacturer-listed or manufacturer-confirmed same-family option.
What can replace PCM3001EG4?
PCM3001E can replace PCM3001EG4 without changing the existing circuit according to the available comparison data. It retains the 28-pin SSOP format and is described as having consistent terminals and functional characteristics. Before approving the change, verify the exact package drawing, electrical limits, audio performance, operating temperature grade, and manufacturing status in the applicable Texas Instruments documentation.
Is PCM3001EG4 the same as PCM3001E?
PCM3001EG4 and PCM3001E are functionally closely related, but they are distinct orderable identifiers. PCM3001EG4 is the specific 28-SSOP part listed by Texas Instruments, while PCM3001E is identified as a complete replacement with consistent terminals and package. The exact suffix still governs orderable grade, packing, and qualification details, so engineers should confirm those attributes rather than treating the base names as interchangeable without review.
PCM3001EG4 vs PCM3001E: which is better for an audio design?
PCM3001EG4 is the preferred choice when procurement specifically requires the complete manufacturer ordering code shown in the bill of materials. PCM3001E may be selected when its datasheet confirms matching electrical characteristics, package terminals, and qualification requirements for the intended product. The comparison identifies PCM3001E as a complete replacement, but the final choice should account for lifecycle, temperature grade, packing, and traceability.
When should I choose PCM3001EG4 over PCM3001E?
Choose PCM3001EG4 when the exact approved part number must be retained for BOM control, existing qualification, or documentation consistency. Choose PCM3001E when its manufacturer documentation confirms that the required electrical limits, package, temperature grade, and qualification are satisfied and purchasing flexibility is important. Both approaches require an exact suffix comparison; a similar base-family designation alone does not establish production suitability.
Is PCM3001EG4 suitable for stereo recording and playback?
Yes, PCM3001EG4 is suitable for compact stereo recording and playback because it combines two ADC channels and two DAC channels with an 18-bit serial interface. The single-ended analog architecture may simplify board routing in many systems, although input gain, headroom, filtering, and output drive still depend on the external signal chain. Check the analog operating limits in the datasheet before setting source and output levels.
What power and thermal considerations apply to PCM3001EG4?
Power-rail design must satisfy the codec's specified operating voltage and current limits, which are taken from the electrical-characteristics table in the manufacturer datasheet. Estimated: total dissipation equals the sum of supply-power draw and analog-output dissipation, but no numerical estimate is appropriate without confirmed operating voltage, load, and ambient conditions. Provide local decoupling and follow the recommended PCB layout to limit supply ripple and junction-temperature rise.
Where can I buy PCM3001EG4 online?
Use the Request a Quote form on this page to request PCM3001EG4 availability, current pricing, and lead time. The form allows buyers to specify the required quantity, packaging, and shipment destination without relying on a stale catalog figure. Confirm the exact PCM3001EG4 suffix and the manufacturer 28-pin SSOP package before placing an order, especially if the design is being migrated to a drop-in candidate.
What is the price of PCM3001EG4?
The current commercial terms for PCM3001EG4 are available through the Request a Quote form on this page. The form supports quantity-specific sourcing and provides the appropriate supply channel for the requested part number. Before requesting terms, confirm whether the design must retain PCM3001EG4 exactly or whether a manufacturer-confirmed drop-in option such as PCM3001E has been approved by engineering.
Is PCM3001EG4 in stock and what is its lead time?
Current PCM3001EG4 stock status and lead time should be requested through the Request a Quote form on this page. Availability can change with order quantity, package configuration, and manufacturing status, so a project should obtain a supply commitment rather than assume that a general listing represents production stock. Include the target quantity, approved alternative policy, and required delivery date in the request.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCM3001EG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose PCM3001EG4 when the design requires the exact Texas Instruments ordering code, particularly when an existing bill of materials, qualification record, or approved package footprint already references it. It integrates two ADCs, two DACs, and an 18-bit serial interface into a 28-pin SSOP, making it appropriate for compact stereo capture and playback systems. PCM3001E is the strongest documented drop-in candidate because the comparison identifies consistent terminals, package compatibility, and equivalent principal characteristics. PCM3001E/2K may be preferable when its orderable conditions and 2000-unit factory pack match procurement needs, but its suffix must be reviewed carefully. Neither alternative should be approved solely from family similarity: verify electrical limits, temperature grade, qualification, clocking, data format, and lifecycle status. For an automotive or other safety-regulated product, select only a suffix whose manufacturer documentation explicitly confirms the required qualification.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য PCM3001E PCM3001E/2K
Package 28-pin SSOP 28-pin SSOP 28-pin SSOP
Brand Texas Instruments Texas Instruments Texas Instruments
Codec Type Stereo audio codec Stereo audio codec Stereo audio codec
ADC Channels 2 channels 2 channels 2 channels
DAC Channels 2 channels 2 channels 2 channels
Resolution 18 bit 18 bit 18 bit
Analog Architecture Single-ended analog input/output Single-ended analog input/output Single-ended analog input/output

মূল পার্থক্যসমূহ

  • Complete stereo conversion in one package (বনামPCM3001E)
  • Exact approved manufacturer ordering identifier (বনামPCM3001E/2K)
  • Single-ended analog integration simplifies board planning (বনামPCM3001E)

ডিজাইন নোট

Separate the analog signal path from digital clock and data routing. Place the codec bypass capacitors at their associated supply pins, keep analog input and output traces short, and avoid routing serial-interface traces beneath sensitive audio nodes. Use a continuous ground reference where the manufacturer layout permits, but follow the datasheet's analog and digital grounding arrangement rather than inventing a split-ground topology.

Treat the serial clock, serial data, and control signals as a synchronous digital interface. Route them over a continuous reference plane, minimize stub branches, and observe the timing and input-capacitance requirements in the manufacturer electrical specifications. Avoid adding long test-point branches unless their loading has been evaluated. Correct clock and data timing is essential because the ADC and DAC channels share the codec's digital transport.

Do not assume that a similar PCM3001 suffix is automatically production-approved. PCM3001E is documented as a complete replacement, while PCM3001E/2K differs in factory pack quantity and may have ordering-code-specific attributes. Before substitution, compare package drawings, electrical limits, temperature grade, qualification, supported data formats, and lifecycle status. Also verify that analog filtering and output-loading assumptions remain unchanged.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Qualified
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The PCM3001E/2K comparison identifies that related ordering option as not AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for PCM3001EG4 were not established from the cited product pages.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

PCM3001EG4 datasheet PCM3001EG4 pinout PCM3001EG4 datasheet pdf PCM3001EG4 equivalent PCM3001EG4 replacement PCM3001EG4 cross reference PCM3001EG4 vs PCM3001E PCM3001EG4 SSOP-28 Texas Instruments PCM3001EG4 PCM3001EG4 price PCM3001EG4 stock PCM3001 18-bit stereo codec

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments PCM3001EG4 PCM3001E PCM3001E/2K PCM3001E/2KG4 audio codec analog-to-digital converter ADC digital-to-analog converter DAC stereo audio interface 18-bit serial interface single-ended analog input single-ended analog output SSOP-28 surface-mount package interface IC signal-conversion semiconductor audio capture stereo playback analog filter digital clock AEC-Q100 RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন