PCM3001EG4 - 18-Bit Stereo Audio Codec | Texas Instruments
MPN: PCM3001EG4 ✓ Hoạt độngPCM3001EG4 Tóm tắt
An audio codec is an integrated circuit that converts digital audio data into an analog output and analog audio signals into digital data. In the broader electronics hierarchy, PCM3001EG4 belongs to the audio codec class, then to interface ICs and signal-conversion semiconductors. The PCM3001EG4 combines a stereo ADC path and stereo DAC path in one package, reducing the number of separate converters required in a compact audio design.
The principal documented features are 18-bit resolution, stereo operation, two ADC channels, two DAC channels, a serial interface, single-ended analog input/output circuitry, and a 28-pin SSOP package. These features suit compact stereo audio products where both playback and recording paths are needed. The matching ADC and DAC channel count allows a system to use one codec for a two-channel input source and a two-channel output destination, subject to the signal-chain requirements defined by the manufacturer.
Technically, the codec separates analog audio conversion from digital transport. Its ADCs sample the incoming analog channels and produce digital data for the host processor, while its DACs receive digital audio and generate analog outputs. The 18-bit serial interface provides the digital link between those converters and the system controller. Designers should treat clocking, data format, analog signal levels, filtering, and power sequencing as the critical implementation considerations rather than treating the codec as a simple standalone audio block.
Typical uses include compact stereo recording systems, multimedia audio subsystems, USB or flash-based player accessories, digital mixing equipment, and embedded audio products. For portable or low-voltage systems, power consumption and analog headroom are important; for active studio equipment, channel-to-channel behavior and external analog circuitry require close attention. A microphone preamplifier may be needed when the source level is too low for direct codec input.
PCB design should keep analog input and output traces away from high-speed digital clock lines, provide the bypass and filtering components shown in the typical application circuit, and terminate unused analog inputs as directed by the manufacturer. Decoupling should be placed close to the supply pins, while the analog and digital ground strategy must follow the datasheet layout guidance. Proper grounding reduces the chance that codec switching activity couples into the reconstructed audio output.
This product page combines the published PCM3001EG4 device identity, channel architecture, resolution, package information, source links, cross-reference findings, and practical design guidance. It also distinguishes documented drop-in relationships from unsupported cross-package options so engineers can make package-aware replacement decisions without assuming that a similar audio codec is electrically interchangeable.
Bộ thay thế dễ dàng lắp đặt cho PCM3001EG4 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với PCM3001EG4 (cùng hình factor và footprint) — khác nhau ở Digital Audio Interface, Package, Package Type.
PCM3001E
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM3001E/2K
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →PCM3001EG4 Thông số kỹ thuật
| Codec Type | Stereo audio codec |
| ADC Resolution | 18 bit |
| DAC Resolution | 18 bit |
| Number of ADCs | 2 channels |
| Number of DACs | 2 channels |
| Input Channels | 2 channels |
| Output Channels | 2 channels |
| Serial Interface | 18-bit serial interface |
| Analog Architecture | Single-ended analog input and output |
| Hộp | 28-pin SSOP |
| Kiểu lắp đặt | Surface mount |
| Datasheet Length | 40 pages |
| Manufacturer | Texas Instruments |
Hướng dẫn cấu hình chân PCM3001EG4 28-pin ssop
Cấu hình chân cho PCM3001EG4 (28-pin ssop gói). Số thứ tự chân, chức năng và sơ đồ kết nối được xác định trong tài liệu thông số kỹ thuật của nhà sản xuất. Tham khảo nó để biết footprint và hướng dẫn hàn chính xác.
Không có dữ liệu chân cụ thể sẵn có cho PCM3001EG4.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
PCM3001EG4 phù hợp cho 6 Áp dụngs: Compact Stereo Audio Interface, Digital Recording and Playback Product, Multimedia Player and Portable Audio, USB Audio Accessory, Digital Audio Mixer, Embedded Instrumentation and Control.
Compact Stereo Audio Interface
PCM3001EG4 fits a compact stereo interface because it combines two ADCs, two DACs, and an 18-bit serial data path in one 28-pin SSOP. A system can route two analog input channels into the ADC side while using the two DAC outputs for stereo playback, reducing the need for separate converter packages. The single-ended analog architecture simplifies many board layouts, but source amplitude, anti-alias filtering, output reconstruction filtering, and clocking still require careful implementation. This arrangement is useful in desktop playback products, teaching equipment, and small digital mixers where component count and board area matter.
Được đề xuất
Digital Recording and Playback Product
The dual-converter configuration makes PCM3001EG4 appropriate for products that record and replay stereo audio through a common codec. Its two ADC channels accept analog sources before conversion to 18-bit digital audio, while its two DAC channels reconstruct digital playback into analog signals. The serial interface connects the codec to a controller or digital audio engine without requiring a separate converter for each direction. Designers should budget analog gain control, input protection, low-pass filtering, and stable clocking, because the codec alone does not replace the surrounding microphone, line-level, or output-amplifier stages.
Được đề xuất
Multimedia Player and Portable Audio
PCM3001EG4 can provide the conversion boundary between a digital media subsystem and analog headphone or line-level circuitry. Its two DAC channels support stereo playback, and the 18-bit interface carries the audio data to the host processor. In a portable product, the complete codec, analog filters, amplifier, and storage controller must be evaluated together for power, channel separation, noise, and output impedance. Because the device also includes two ADCs, recording functions can be added without a second converter when the enclosure, interface, and power budget permit.
Được đề xuất
USB Audio Accessory
A USB audio accessory can use PCM3001EG4 as the analog conversion element between a USB audio controller and external input/output circuitry. The controller handles USB transport and audio-format timing while the codec performs 18-bit stereo ADC and DAC conversion through its serial interface. Layout quality is especially important in USB products because switching current from the digital controller and USB data lines can couple into sensitive analog nodes. Keep clock and data routes away from microphone inputs, use solid reference planes, and implement the filtering and decoupling arrangements shown in the manufacturer application guidance.
Được đề xuất
Digital Audio Mixer
PCM3001EG4 is useful in a small digital mixer that needs two analog inputs and two analog outputs around a digital signal-processing stage. ADC outputs can be processed for level, routing, or effects before being returned through the DAC channels. Its integrated stereo conversion reduces the number of discrete converters on the board, although an actual mixer may still require microphone preamplification, line input conditioning, potentiometers, output amplification, and protection. Because the codec uses a serial interface, the controlling processor must support the required clocking and data format.
Được đề xuất
Embedded Instrumentation and Control
PCM3001EG4 can support embedded audio monitoring, configuration feedback, or audible event notification in an industrial control system. Two ADC channels can capture analog sensor or communication audio, and two DAC channels can generate test or status tones through external analog circuitry. Industrial environments may introduce wide temperature, vibration, and electromagnetic-interference conditions, so the exact device grade and operating limits should be verified before deployment. The analog path should be isolated from high-current switching stages, and the digital interface should use proper grounding and impedance-controlled routing.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho PCM3001EG4 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | PCM3001E | PCM3001E/2K |
|---|---|---|---|
| Package | 28-pin SSOP | 28-pin SSOP | 28-pin SSOP |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments |
| Codec Type | Stereo audio codec | Stereo audio codec | Stereo audio codec |
| ADC Channels | 2 channels | 2 channels | 2 channels |
| DAC Channels | 2 channels | 2 channels | 2 channels |
| Resolution | 18 bit | 18 bit | 18 bit |
| Analog Architecture | Single-ended analog input/output | Single-ended analog input/output | Single-ended analog input/output |
Bảo phân biệt quan trọng
- Complete stereo conversion in one package (vsPCM3001E)
- Exact approved manufacturer ordering identifier (vsPCM3001E/2K)
- Single-ended analog integration simplifies board planning (vsPCM3001E)
Ghi chú thiết kế
Separate the analog signal path from digital clock and data routing. Place the codec bypass capacitors at their associated supply pins, keep analog input and output traces short, and avoid routing serial-interface traces beneath sensitive audio nodes. Use a continuous ground reference where the manufacturer layout permits, but follow the datasheet's analog and digital grounding arrangement rather than inventing a split-ground topology.
Treat the serial clock, serial data, and control signals as a synchronous digital interface. Route them over a continuous reference plane, minimize stub branches, and observe the timing and input-capacitance requirements in the manufacturer electrical specifications. Avoid adding long test-point branches unless their loading has been evaluated. Correct clock and data timing is essential because the ADC and DAC channels share the codec's digital transport.
Do not assume that a similar PCM3001 suffix is automatically production-approved. PCM3001E is documented as a complete replacement, while PCM3001E/2K differs in factory pack quantity and may have ordering-code-specific attributes. Before substitution, compare package drawings, electrical limits, temperature grade, qualification, supported data formats, and lifecycle status. Also verify that analog filtering and output-loading assumptions remain unchanged.
Thông tin tuân thủ
The PCM3001E/2K comparison identifies that related ordering option as not AEC-Q100 qualified. RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for PCM3001EG4 were not established from the cited product pages.