PCM3002E/2K - 20-Bit Stereo Audio Codec | Texas Instruments
MPN: PCM3002E/2K ✓ সক্রিয়PCM3002E/2K সারাংশ
A stereo audio codec is an interface IC that converts analog audio signals into digital PCM data and converts digital PCM data back into analog audio. It sits between an audio source, such as a microphone or line-level input, and a digital signal processor, microcontroller, or digital audio transmitter. The PCM3002 belongs to the broader codec hierarchy, which includes audio codecs, audio interface ICs, data converters, and interface semiconductors.
Key features include 64-times oversampling, a typical signal-to-noise ratio of 90 dB, and 16-bit or 20-bit serial data operation. The two ADC channels use single-ended voltage inputs, while the two DAC channels provide single-ended analog outputs. These characteristics make the device suitable for compact stereo audio paths where a separate ADC, DAC, and interface circuit would otherwise be required.
Internally, the codec integrates antialiasing filtering with its oversampling conversion architecture. The serial interface supports I2S, L-format, and right-justified data formats according to the cross-reference information for the PCM3002 family. Its 3.6 V maximum supply operation supports low-voltage digital audio systems, while the integrated converters reduce component count and simplify synchronization between the analog and digital sections.
Typical applications include digital recording equipment, powered speakers, compact consumer audio products, sound-card inputs, industrial audio terminals, and embedded audio systems that require stereo conversion at 48 kS/s. The software-control architecture is particularly useful when a host processor must select operating modes, adjust gain, or manage system functions through the serial control interface.
PCB design should treat the analog input and output paths as sensitive signal routes. Keep analog and digital ground handling consistent with the manufacturer's recommended layout, place bypass and interface components close to their associated pins, and route high-speed serial clock and data lines away from the analog inputs. Adequate filtering and stable 3.6 V power are essential for repeatable low-noise operation.
This page combines the manufacturer specifications with practical interface guidance, application-oriented design notes, and a focused comparison of pin-compatible family options. It is intended to help engineers select the correct codec variant, plan its analog and digital implementation, and evaluate replacement choices without overlooking control-mode or data-format differences.
এর জন্য ড্রপ-ইন বিকল্প PCM3002E/2K — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible PCM3002E/2K (একই form factor এবং footprint) — পার্থক্য রয়েছে ADC Resolution, DAC Resolution, Package, Digital Audio Interface.
PCM3003E/2K
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PCM3002EG/2K
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PCM3002E/2KG4
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PCM3002E
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PCM3002E
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PCM3002E/2K বিশেষণ
| Product Type | Stereo audio codec |
| ADC Resolution | 20 bit |
| DAC Resolution | 20 bit |
| Supported Serial Data Resolution | 16 bit or 20 bit |
| ADC Channel Count | 2 channels |
| DAC Channel Count | 2 channels |
| Analog Input Type | Single-ended voltage input |
| Analog Output Type | Single-ended voltage output |
| Digital Audio Interface | I2S, L-format, and right-justified serial audio |
| Control Method | Software control |
| Maximum Sampling Rate | 48 kS/s |
| Oversampling Ratio | 64 times |
| Signal-to-Noise Ratio | 90 dB typical |
| THD+N | -86 dB |
| Supply Voltage Range | 2.7 V to 3.6 V |
| Maximum Supply Voltage | 3.6 V |
| অপারেটিং তাপমাত্রার পরিসর | -25 C to +85 C |
| প্যাকেজ | 24-pin SSOP (DB) |
| মাউন্টিং টাইপ | Surface mount |
| Analog Antialiasing Filter | Integrated |
PCM3002E/2K 24-pin ssop (db) পিন কনফিগারেশন গাইড
PCM3002E/2K (24-pin ssop (db) প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCM3002E/2K.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PCM3002E/2K এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Stereo Digital Recording, Powered Speaker Interface, USB Audio Adapter, Industrial Audio Terminal, Consumer Audio System, Multimedia Capture Module.
Stereo Digital Recording
The PCM3002E/2K fits a two-channel digital recorder that accepts single-ended analog sources and stores PCM audio through a digital processor. Its two 20-bit ADC channels support sampling at up to 48 kS/s, while 64-times oversampling and the integrated antialiasing filter simplify the conversion path. The 90 dB typical signal-to-noise ratio is useful when preserving quiet program material without adding a separate ADC. Place the analog inputs away from digital clock traces, follow the recommended grounding scheme, and verify gain staging against the source impedance. The software-controlled interface also allows the host processor to manage codec functions without adding a separate register-control device.
সুপারিশকৃত
Powered Speaker Interface
The PCM3002E/2K can provide the digital-to-analog portion of a compact powered-speaker design. Two single-ended DAC outputs support a stereo output stage, and the serial interface accommodates I2S, L-format, or right-justified audio from a digital audio processor. With a 2.7 V to 3.6 V operating range, the codec suits 3.3 V audio platforms. The designer should account for output-headroom requirements in the following amplifier stage, preserve quiet analog routing, and keep the codec supply bypassing close to the device. Its 20-bit conversion capability offers a practical balance between resolution, power, and implementation complexity.
সুপারিশকৃত
USB Audio Adapter
The PCM3002E/2K is suitable for the stereo conversion block of a USB audio adapter. A digital audio interface can route USB PCM audio to the codec for 16-bit or 20-bit operation, while the codec provides two analog outputs for a headphone or line-output stage. The maximum sampling rate of 48 kS/s covers conventional playback and recording rates. Keep USB data routing separated from the single-ended outputs, use a continuous reference plane for the analog section, and validate output ripple with the actual downstream amplifier. Its integrated ADC also permits a product to support microphone or line-input recording alongside playback.
সুপারিশকৃত
Industrial Audio Terminal
The PCM3002E/2K can convert stereo line-level audio in an industrial monitoring or communication terminal. Its two single-ended inputs accept analog channels from sensors, intercom circuits, or amplified sources, while the digital interface transfers 16-bit or 20-bit PCM data to an embedded controller. Operation across 2.7 V to 3.6 V supports low-voltage industrial logic. Designers should use the manufacturer input-biasing and filtering guidance, isolate external noise sources, and confirm signal amplitude against the converter input range. The software-control architecture is useful when a supervisory processor needs to coordinate codec configuration with other system functions.
সুপারিশকৃত
Consumer Audio System
The PCM3002E/2K fits consumer audio products requiring one stereo input and one stereo output without separate converter packages. The integrated 20-bit ADC and DAC reduce board area, while 48 kS/s operation and 64-times oversampling support standard digital-audio content. Two single-ended analog inputs can accept a source amplifier, and the dual outputs can feed a line stage or speaker amplifier. A successful design depends on clean power, short analog routes, and correct ground partitioning between digital communications and audio outputs. Where higher resolution is necessary, PCM3003E/2K provides the same package footprint and pinout with 24-bit conversion and a different line-output control method.
সুপারিশকৃত
Multimedia Capture Module
The PCM3002E/2K is appropriate for a multimedia capture module combining analog audio capture and digital playback. Two ADC channels can capture stereo line audio, and two DAC channels can generate a stereo monitoring output from digital sample data. The serial interface supports common audio-data formats, including I2S and L-format, while its software control allows configuration by the module's main processor. Keep microphone or line preamplifier outputs within the permitted input range, maintain symmetrical routing for stereo signals, and test clock-related crosstalk after PCB assembly. The 90 dB typical signal-to-noise ratio supports consumer and semi-professional capture where a separate converter pair would add complexity.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCM3002E/2K — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PCM3003E/2K | PCM3002EG/2K | PCM3002E/2KG4 | PCM3002E | PCM3002 |
|---|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 24-pin SSOP (DB) | 24-pin SSOP (DB) | 24-pin SSOP (DB) | 24-pin SSOP (DB) | 24-pin SSOP (DB) | 24-pin SSOP (DB) |
| ADC Resolution | 20 bit | 24 bit | 20 bit | 20 bit | 20 bit | 20 bit |
| DAC Resolution | 20 bit | 24 bit | 20 bit | 20 bit | 20 bit | 20 bit |
| ADC Channel Count | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| DAC Channel Count | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels | 2 channels |
| Maximum Sampling Rate | 48 kS/s | 48 kS/s | 48 kS/s | 48 kS/s | 48 kS/s | 48 kS/s |
| Supply Voltage Range | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
মূল পার্থক্যসমূহ
- Integrated stereo conversion reduces external converter count (বনামPCM3003E/2K)
- Software-controlled line output supports register-based system management (বনামPCM3003E/2K)
- Direct 20-bit conversion capability (বনামPCM3002EG/2K)
ডিজাইন নোট
Keep the analog input and output traces short, route them away from serial clock and data lines, and use a continuous ground plane beneath the codec. Connect analog and digital return currents according to the manufacturer's recommended layout rather than dividing the ground plane beneath the device. Place input and output capacitors close to their associated pins, and place supply bypass capacitors at the supply and ground pins. This arrangement reduces conversion of switching current and digital data activity into audible analog noise.
Operate the PCM3002E/2K from a regulated 2.7 V to 3.6 V supply and keep the analog and digital supply connections within the limits stated by the Texas Instruments PCM3002 datasheet. Use the manufacturer's recommended capacitor values and place them directly beside the relevant pins. Avoid long power branches or shared impedances with noisy downstream amplifiers, because supply ripple can affect codec noise performance and the 90 dB typical signal-to-noise ratio is measured under defined operating conditions.
Do not treat PCM3002E/2K and PCM3003E/2K as register-identical devices merely because they share the 24-SSOP footprint and pinout. The PCM3002 family uses software control, while the PCM3003 family uses hardware control for its line output and provides 24-bit conversion. Review reset behavior, serial timing, control levels, and software initialization before substituting one for the other. Also verify the exact ordering suffix when sourcing a replacement so the manufacturer shipping configuration matches the assembly process.
কমপ্লায়েন্স তথ্য
No explicit compliance declarations were identified for the exact PCM3002E/2K ordering configuration. Compliance status should be confirmed from the Texas Instruments product documentation before environmental or automotive qualification.