Texas Instruments

PCM3002E/2K - 20-Bit Stereo Audio Codec | Texas Instruments

部品番号: PCM3002E/2K ✓ 生産中
2.7 V to 3.6 V Vdss 24-pin SSOP (DB) Package
MOQ: 1 |

PCM3002E/2K 概要

The Texas Instruments PCM3002E/2K is a low-power stereo audio codec combining a 20-bit ADC, a 20-bit DAC, and a serial digital audio interface in a 24-pin SSOP package. It supports two single-ended analog inputs, two single-ended analog outputs, 16-bit or 20-bit input and output data, and a maximum sampling rate of 48 kS/s. The codec operates from a 2.7 V to 3.6 V supply and is controlled in software through its serial interface.

A stereo audio codec is an interface IC that converts analog audio signals into digital PCM data and converts digital PCM data back into analog audio. It sits between an audio source, such as a microphone or line-level input, and a digital signal processor, microcontroller, or digital audio transmitter. The PCM3002 belongs to the broader codec hierarchy, which includes audio codecs, audio interface ICs, data converters, and interface semiconductors.

Key features include 64-times oversampling, a typical signal-to-noise ratio of 90 dB, and 16-bit or 20-bit serial data operation. The two ADC channels use single-ended voltage inputs, while the two DAC channels provide single-ended analog outputs. These characteristics make the device suitable for compact stereo audio paths where a separate ADC, DAC, and interface circuit would otherwise be required.

Internally, the codec integrates antialiasing filtering with its oversampling conversion architecture. The serial interface supports I2S, L-format, and right-justified data formats according to the cross-reference information for the PCM3002 family. Its 3.6 V maximum supply operation supports low-voltage digital audio systems, while the integrated converters reduce component count and simplify synchronization between the analog and digital sections.

Typical applications include digital recording equipment, powered speakers, compact consumer audio products, sound-card inputs, industrial audio terminals, and embedded audio systems that require stereo conversion at 48 kS/s. The software-control architecture is particularly useful when a host processor must select operating modes, adjust gain, or manage system functions through the serial control interface.

PCB design should treat the analog input and output paths as sensitive signal routes. Keep analog and digital ground handling consistent with the manufacturer's recommended layout, place bypass and interface components close to their associated pins, and route high-speed serial clock and data lines away from the analog inputs. Adequate filtering and stable 3.6 V power are essential for repeatable low-noise operation.

This page combines the manufacturer specifications with practical interface guidance, application-oriented design notes, and a focused comparison of pin-compatible family options. It is intended to help engineers select the correct codec variant, plan its analog and digital implementation, and evaluate replacement choices without overlooking control-mode or data-format differences.

ドロップイン代替品: PCM3002E/2K — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

このシリーズのバリエーション

同一シリーズでドロップイン互換のモデル: PCM3002E/2K (同一形状・フットプリント) — 相違点: ADC Resolution, DAC Resolution, Package, Digital Audio Interface.

Texas Instruments
ADC Resolution: 16/20 bit
DAC Resolution: 16/20 bit
Package: 24-pin SSOP
Texas Instruments
ADC Resolution: 20 bit
DAC Resolution: 20 bit
Package: 24-pin SSOP (DB)

PCM3003E/2K

✅ ドロップイン
Texas Instruments
📦 24-pin SSOP (DB)
20 bit · 20 bit · 16 bit or 20 bit · 16 bit or 20 bit · 64 times · -86 dB · Single-ended voltage input · Single-ended voltage output

価格はお問い合わせください

データシートを見る →

PCM3002EG/2K

✅ ドロップイン
📦 24-pin SSOP (DB)
PCM3002 family variant; published comparison identifies product-level differences, but the exact electrical delta is

📋 参考代替品(カタログ未掲載)

PCM3002E/2KG4

✅ ドロップイン
📦 24-pin SSOP (DB)
Electrical performance is unchanged; ordering suffix identifies a different manufacturer shipping configuration

📋 参考代替品(カタログ未掲載)

PCM3002E

✅ ドロップイン
Texas Instruments
📦 24-pin SSOP (DB)
Low-power stereo audio codec · 16/20 bit · 16/20 bit · 2 channels · 2 channels · Delta-sigma modulation · 64 times · 8 times

価格はお問い合わせください

データシートを見る →

PCM3002E

✅ ドロップイン
Texas Instruments
📦 24-pin SSOP (DB)
Low-power stereo audio codec · 16/20 bit · 16/20 bit · 2 channels · 2 channels · Delta-sigma modulation · 64 times · 8 times

価格はお問い合わせください

データシートを見る →

PCM3002E/2K 仕様

Product Type Stereo audio codec
ADC Resolution 20 bit
DAC Resolution 20 bit
Supported Serial Data Resolution 16 bit or 20 bit
ADC Channel Count 2 channels
DAC Channel Count 2 channels
Analog Input Type Single-ended voltage input
Analog Output Type Single-ended voltage output
Digital Audio Interface I2S, L-format, and right-justified serial audio
Control Method Software control
Maximum Sampling Rate 48 kS/s
Oversampling Ratio 64 times
Signal-to-Noise Ratio 90 dB typical
THD+N -86 dB
Supply Voltage Range 2.7 V to 3.6 V
Maximum Supply Voltage 3.6 V
動作温度範囲 -25 C to +85 C
パッケージ 24-pin SSOP (DB)
実装タイプ Surface mount
Analog Antialiasing Filter Integrated

PCM3002E/2K 24-pin ssop (db) ピン配置ガイド

PCM3002E/2K (24-pin ssop (db) パッケージ) のピン配置。 ピン番号、機能、接続図はメーカーのデータシートで定義されています。正確なフットプリントとはんだ付けのガイドラインについては、データシートを参照してください。

PCM3002E/2K の 24-pin ssop (db) パッケージピン配置図

詳細なピン配置データはありません: PCM3002E/2K.

詳細は データシート をご参照ください。

主な用途

PCM3002E/2K の用途: 6 件s: Stereo Digital Recording, Powered Speaker Interface, USB Audio Adapter, Industrial Audio Terminal, Consumer Audio System, Multimedia Capture Module.

🎧

Stereo Digital Recording

The PCM3002E/2K fits a two-channel digital recorder that accepts single-ended analog sources and stores PCM audio through a digital processor. Its two 20-bit ADC channels support sampling at up to 48 kS/s, while 64-times oversampling and the integrated antialiasing filter simplify the conversion path. The 90 dB typical signal-to-noise ratio is useful when preserving quiet program material without adding a separate ADC. Place the analog inputs away from digital clock traces, follow the recommended grounding scheme, and verify gain staging against the source impedance. The software-controlled interface also allows the host processor to manage codec functions without adding a separate register-control device.

🔊

Powered Speaker Interface

The PCM3002E/2K can provide the digital-to-analog portion of a compact powered-speaker design. Two single-ended DAC outputs support a stereo output stage, and the serial interface accommodates I2S, L-format, or right-justified audio from a digital audio processor. With a 2.7 V to 3.6 V operating range, the codec suits 3.3 V audio platforms. The designer should account for output-headroom requirements in the following amplifier stage, preserve quiet analog routing, and keep the codec supply bypassing close to the device. Its 20-bit conversion capability offers a practical balance between resolution, power, and implementation complexity.

💻

USB Audio Adapter

The PCM3002E/2K is suitable for the stereo conversion block of a USB audio adapter. A digital audio interface can route USB PCM audio to the codec for 16-bit or 20-bit operation, while the codec provides two analog outputs for a headphone or line-output stage. The maximum sampling rate of 48 kS/s covers conventional playback and recording rates. Keep USB data routing separated from the single-ended outputs, use a continuous reference plane for the analog section, and validate output ripple with the actual downstream amplifier. Its integrated ADC also permits a product to support microphone or line-input recording alongside playback.

🏭

Industrial Audio Terminal

The PCM3002E/2K can convert stereo line-level audio in an industrial monitoring or communication terminal. Its two single-ended inputs accept analog channels from sensors, intercom circuits, or amplified sources, while the digital interface transfers 16-bit or 20-bit PCM data to an embedded controller. Operation across 2.7 V to 3.6 V supports low-voltage industrial logic. Designers should use the manufacturer input-biasing and filtering guidance, isolate external noise sources, and confirm signal amplitude against the converter input range. The software-control architecture is useful when a supervisory processor needs to coordinate codec configuration with other system functions.

📱

Consumer Audio System

The PCM3002E/2K fits consumer audio products requiring one stereo input and one stereo output without separate converter packages. The integrated 20-bit ADC and DAC reduce board area, while 48 kS/s operation and 64-times oversampling support standard digital-audio content. Two single-ended analog inputs can accept a source amplifier, and the dual outputs can feed a line stage or speaker amplifier. A successful design depends on clean power, short analog routes, and correct ground partitioning between digital communications and audio outputs. Where higher resolution is necessary, PCM3003E/2K provides the same package footprint and pinout with 24-bit conversion and a different line-output control method.

🖥️

Multimedia Capture Module

The PCM3002E/2K is appropriate for a multimedia capture module combining analog audio capture and digital playback. Two ADC channels can capture stereo line audio, and two DAC channels can generate a stereo monitoring output from digital sample data. The serial interface supports common audio-data formats, including I2S and L-format, while its software control allows configuration by the module's main processor. Keep microphone or line preamplifier outputs within the permitted input range, maintain symmetrical routing for stereo signals, and test clock-related crosstalk after PCB assembly. The 90 dB typical signal-to-noise ratio supports consumer and semi-professional capture where a separate converter pair would add complexity.

おすすめ製品の概要

PCM3003E/2K Texas Instruments 使用用途: Stereo Digital Recording, Powered Speaker Interface, USB Audio Adapter, Industrial Audio Terminal, Consumer Audio System, Multimedia Capture Module PCM3002E/2KG4 Same codec family ordering configuration 使用用途: Stereo Digital Recording, Consumer Audio System PCM5142PWR Texas Instruments 使用用途: Powered Speaker Interface PCM3002E Texas Instruments 使用用途: USB Audio Adapter PCM3002EG/2K PCM3002 family ordering variant 使用用途: Industrial Audio Terminal PCM3002 Base stereo audio codec configuration 使用用途: Multimedia Capture Module
What is the PCM3002E/2K?
The PCM3002E/2K is a Texas Instruments low-power stereo audio codec with integrated 20-bit ADC and DAC sections. It provides two single-ended analog inputs, two single-ended analog outputs, and a software-controlled serial interface in a 24-pin SSOP package. According to the Texas Instruments PCM3002 product page, it is designed for 48 kS/s stereo audio conversion from a 2.7 V to 3.6 V supply.
What are the key specifications of PCM3002E/2K that engineers should know?
The PCM3002E/2K combines a 20-bit ADC, a 20-bit DAC, two analog inputs, two analog outputs, and 64-times oversampling in a 24-pin SSOP. It supports 16-bit or 20-bit serial audio data, I2S, L-format, and right-justified interfaces, with a maximum sampling rate of 48 kS/s. The Texas Instruments PCM3002 product information also identifies software control as the standard control configuration.
What is the operating voltage of PCM3002E/2K?
The PCM3002E/2K operates from 2.7 V to 3.6 V, making it suitable for 3.3 V embedded audio systems. The PCM3002 family information identifies 3.6 V as the upper supply limit. Designers should regulate the analog and digital supply rails close to the pins and use the decoupling network shown in the Texas Instruments PCM3002 datasheet to maintain stable operation.
How many ADC and DAC channels does PCM3002E/2K have?
The PCM3002E/2K has two ADC channels and two DAC channels, supporting stereo audio conversion. Its analog inputs are single-ended voltage inputs, and its analog outputs are single-ended. The PCM3002 family comparison identifies two ADC channels, two DAC channels, two analog inputs, and two analog outputs, consistent with the Texas Instruments product description.
What sampling rate and oversampling does PCM3002E/2K support?
The PCM3002E/2K supports sampling rates up to 48 kS/s and uses 64-times oversampling in its conversion architecture. The integrated antialiasing filter and oversampling stage reduce the demands placed on downstream digital filtering. These rates align with the PCM3002 family data covering 16-bit and 20-bit single-ended analog input and output operation.
Where can I download the PCM3002E/2K datasheet PDF?
The official PCM3002E/2K datasheet can be accessed through the Texas Instruments product link on this page, which points to the manufacturer datasheet entry for PCM3002. The same page also provides the product ordering information and technical parameters. Use the manufacturer PDF for the authoritative pin descriptions, recommended application circuit, control-register map, and layout guidance.
Where can I find the PCM3002E/2K pinout?
The PCM3002E/2K pinout is found in the pin-description table and package drawing of the Texas Instruments PCM3002 datasheet. The component uses the 24-pin SSOP, or DB, package. Use the manufacturer pin-description table when assigning analog inputs, analog outputs, serial data, serial clock, reset, control signals, supply rails, and ground connections on the PCB.
What is the difference between PCM3002E/2K and PCM3003E/2K?
PCM3003E/2K is a 24-bit drop-in-compatible variant of the 20-bit PCM3002E/2K, while PCM3002E/2K uses software control for its line output. Both use the same 24-SSOP footprint and pinout and operate from 2.7 V to 3.6 V. Choose PCM3003E/2K when the added conversion resolution is required; otherwise, the PCM3002E/2K remains appropriate for 20-bit designs.
What is the best drop-in replacement for PCM3002E/2K?
The closest same-family drop-in replacement is PCM3003E/2K because it retains the 24-SSOP footprint and pinout while increasing converter resolution to 24 bits. Its control implementation differs because the PCM3003 family uses hardware control for the line output. Confirm software-control requirements and register compatibility in the system design before replacing the PCM3002E/2K.
Can PCM3003E/2K replace PCM3002E/2K?
PCM3003E/2K can serve as a pin-compatible 24-bit upgrade for PCM3002E/2K boards. Both devices use the same 24-SSOP package and operate across 2.7 V to 3.6 V. The principal engineering difference is resolution and control method: PCM3003E/2K provides 24-bit conversion and hardware-controlled line output, while PCM3002E/2K provides 20-bit conversion and software control.
When should I choose PCM3002E/2K over PCM3003E/2K?
Choose PCM3002E/2K when a design already uses its 20-bit converters and software-controlled line output, making software compatibility more important than higher conversion resolution. PCM3003E/2K is preferable when 24-bit processing is valuable and the hardware-controlled line output fits the system. Both preserve the 24-SSOP footprint, but their control behavior must be reviewed before substitution.
Is PCM3002E/2K suitable for a 48 kS/s stereo recording product?
The PCM3002E/2K is suitable for a 48 kS/s stereo recording product with two single-ended analog inputs and two single-ended analog outputs. Its 20-bit ADC and DAC sections, 64-times oversampling, and 90 dB typical signal-to-noise ratio support compact consumer and industrial recording paths. The host processor must support the selected serial format and software-control register implementation.
What is the PCM3002E/2K vs PCM3002E/2KG4 difference?
PCM3002E/2K and PCM3002E/2KG4 identify ordering configurations of the same Texas Instruments PCM3002E device family, but the available cross-reference information does not establish a functional distinction. The suffix and shipping form should therefore be checked against the manufacturer ordering table rather than treated as an electrical upgrade. Both references use the 24-pin SSOP family and the same stereo codec architecture.
Where can I buy PCM3002E/2K online?
Use the Request a Quote form on this page to ask for PCM3002E/2K pricing, current inventory, minimum order quantity, and delivery timing. The exact package and ordering suffix must remain PCM3002E/2K when requesting a quote. Confirm the manufacturer orderable status and the required reel or other shipping configuration through the returned quotation.
What is the lead time and price of PCM3002E/2K?
The current price, stock position, and lead time for PCM3002E/2K are handled through the Request a Quote form on this page. Submit the required quantity, package, and delivery location for a current commercial response. The component is a 24-pin SSOP stereo codec, so a quotation for a different PCM3002 suffix should not be substituted for the exact PCM3002E/2K order.

エンジニアリング参考データ: PCM3002E/2K — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose PCM3002E/2K for a 3.3 V stereo audio system that needs two single-ended inputs, two single-ended outputs, 16-bit or 20-bit serial data, and software-controlled codec operation. Its 48 kS/s maximum rate, 64-times oversampling, integrated antialiasing filter, and 90 dB typical signal-to-noise ratio make it a practical choice for recording products, powered speakers, and embedded audio capture modules. Choose PCM3003E/2K when the same 24-SSOP footprint is needed with 24-bit conversion and hardware-controlled line output. PCM3002E/2KG4, PCM3002E, and PCM3002 remain same-family ordering choices, but their exact manufacturer shipping or ordering codes must match the production method. No cross-brand drop-in replacement was established, so a redesign should be considered rather than assuming functional interchangeability.

代替品との比較

パラメータ この製品 PCM3003E/2K PCM3002EG/2K PCM3002E/2KG4 PCM3002E PCM3002
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 24-pin SSOP (DB) 24-pin SSOP (DB) 24-pin SSOP (DB) 24-pin SSOP (DB) 24-pin SSOP (DB) 24-pin SSOP (DB)
ADC Resolution 20 bit 24 bit 20 bit 20 bit 20 bit 20 bit
DAC Resolution 20 bit 24 bit 20 bit 20 bit 20 bit 20 bit
ADC Channel Count 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
DAC Channel Count 2 channels 2 channels 2 channels 2 channels 2 channels 2 channels
Maximum Sampling Rate 48 kS/s 48 kS/s 48 kS/s 48 kS/s 48 kS/s 48 kS/s
Supply Voltage Range 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V 2.7 V to 3.6 V

主な差別化要因

  • Integrated stereo conversion reduces external converter count (vs PCM3003E/2K)
  • Software-controlled line output supports register-based system management (vs PCM3003E/2K)
  • Direct 20-bit conversion capability (vs PCM3002EG/2K)

設計ノート

Keep the analog input and output traces short, route them away from serial clock and data lines, and use a continuous ground plane beneath the codec. Connect analog and digital return currents according to the manufacturer's recommended layout rather than dividing the ground plane beneath the device. Place input and output capacitors close to their associated pins, and place supply bypass capacitors at the supply and ground pins. This arrangement reduces conversion of switching current and digital data activity into audible analog noise.

Operate the PCM3002E/2K from a regulated 2.7 V to 3.6 V supply and keep the analog and digital supply connections within the limits stated by the Texas Instruments PCM3002 datasheet. Use the manufacturer's recommended capacitor values and place them directly beside the relevant pins. Avoid long power branches or shared impedances with noisy downstream amplifiers, because supply ripple can affect codec noise performance and the 90 dB typical signal-to-noise ratio is measured under defined operating conditions.

Do not treat PCM3002E/2K and PCM3003E/2K as register-identical devices merely because they share the 24-SSOP footprint and pinout. The PCM3002 family uses software control, while the PCM3003 family uses hardware control for its line output and provides 24-bit conversion. Review reset behavior, serial timing, control levels, and software initialization before substituting one for the other. Also verify the exact ordering suffix when sourcing a replacement so the manufacturer shipping configuration matches the assembly process.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No explicit compliance declarations were identified for the exact PCM3002E/2K ordering configuration. Compliance status should be confirmed from the Texas Instruments product documentation before environmental or automotive qualification.

データ検証日: 2026-11-20 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

PCM3002E/2K datasheet PCM3002E/2K pinout PCM3002E/2K datasheet pdf PCM3002E/2K specifications PCM3002E/2K equivalent PCM3002E/2K replacement PCM3002E/2K vs PCM3003E/2K PCM3002E/2K cross reference PCM3002E/2K 24-SSOP footprint PCM3002E/2K application circuit Texas Instruments PCM3002E/2K PCM3002E/2K price PCM3002E/2K stock PCM3002E/2K lead time PCM3002E/2K 20-bit stereo codec

関連部品&用語

Texas Instruments PCM3002E/2K PCM3003E/2K PCM3002E/2KG4 PCM3002EG/2K stereo audio codec audio codec audio interface IC analog-to-digital converter ADC digital-to-analog converter DAC semiconductor single-ended analog input single-ended analog output I2S L-format right-justified audio interface 64-times oversampling antialiasing filter signal-to-noise ratio THD+N 24-pin SSOP SSOP family surface-mount package 48 kS/s 2.7 V to 3.6 V power supply software control hardware control RoHS REACH AEC-Q100
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示