PCM3500EG4 - 16-Bit Mono Voice Codec | Texas Instruments
MPN: PCM3500EG4 ✓ সক্রিয়PCM3500EG4 সারাংশ
A voice or modem codec is an interface IC that converts analog audio into a digital serial stream and reconstructs an analog signal from digital audio data. In the signal-chain hierarchy, it belongs to the audio codec family within interface ICs and semiconductor signal-processing devices. The PCM3500EG4 combines a mono analog channel with a serial digital interface, providing a compact solution where low supply voltage, low power, or voice-band bandwidth is more important than stereo playback functionality.
The principal device characteristics include 16-bit resolution, mono operation, a 2.7 V to 3.6 V power-supply range, and a typical ADC signal-to-noise ratio of 88 dB. Integrated power-down capability reduces consumption when the voice channel is inactive. Its serial interface can also support time-slot arrangements in which as many as four PCM3500 devices share a four-wire interface bus using four positions in a 64-bit long frame.
PCM3500EG4 targets applications where a dedicated voice-band converter is preferable to a general-purpose multimedia codec. The mono architecture avoids the channels and controls required for stereo playback, while the 16-bit interface is suitable for speech and modem waveforms. Its low-voltage operation also makes it appropriate for portable communication equipment operating from a 3.3 V system rail.
Typical uses include modem analog front ends, speech-processing systems, telephone-interface equipment, voice-recording terminals, and compact communications controllers. In a modem or speech system, the codec can convert microphone-band or line-band audio to serial PCM data for a digital signal processor, while its decoding path reconstructs the analog voice signal. Multiple codecs can share a serial bus when time-slot multiplexing is required.
Power-supply noise deserves particular attention because operation at or near the 2.7 V minimum reduces analog headroom and can degrade the achievable signal-to-noise ratio. Place the required bypass capacitors close to the supply pins, keep analog and digital return-current paths controlled, and follow the pin-description and layout guidance in the manufacturer datasheet when assigning PCB tracks.
This product summary combines the PCM3500EG4 device identity, voltage and resolution requirements, voice-band use cases, interface-sharing capability, and practical power considerations to support component selection, schematic review, and footprint planning.
এর জন্য ড্রপ-ইন বিকল্প PCM3500EG4 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible PCM3500EG4 (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Channel Configuration.
PCM3500E
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PCM3500EG4 বিশেষণ
| Product Type | Mono voice/modem audio codec |
| রেজোলিউশন | 16 bit |
| Channel Configuration | 1 channel mono |
| Supply Voltage Range | 2.7 V to 3.6 V |
| Nominal Supply Voltage | 3.3 V |
| ADC Signal-to-Noise Ratio | 88 dB typical |
| প্যাকেজ | 24-pin SSOP |
| মাউন্টিং টাইপ | Surface mount |
| Power-Down Mode | Integrated |
| Time-Slot Interface Capacity | Up to 4 codecs on one four-wire serial bus |
| Time-Slot Frame Length | 64 bit |
| Number of Time Slots | 4 |
PCM3500EG4 24-pin ssop পিন কনফিগারেশন গাইড
PCM3500EG4 (24-pin ssop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCM3500EG4.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PCM3500EG4 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Modem Analog Front End, Speech-Processing Terminal, Telephony Interface Equipment, Voice Recording Terminal, Time-Slot Voice Multiplexer, Portable Communication Device.
Modem Analog Front End
The PCM3500EG4 fits a modem analog front end requiring one 16-bit mono voice-band conversion channel. Its 2.7 V to 3.6 V operating range accommodates a 3.3 V communications rail, while the 88 dB typical ADC signal-to-noise ratio provides useful dynamic range for transmitted speech and modem waveforms. Place the codec close to the line or microphone-band front end to minimize analog trace exposure. Its dedicated voice-band role avoids the channel count and feature overhead of a general-purpose stereo codec. The design should also preserve clean supply decoupling because operation near 2.7 V provides less analog headroom and can increase sensitivity to power-supply noise.
সুপারিশকৃত
Speech-Processing Terminal
PCM3500EG4 is appropriate for a speech-processing terminal that converts a single analog voice channel into 16-bit serial data for digital processing. The mono architecture matches typical speech-capture and playback channels without adding unnecessary stereo paths, and the 2.7 V to 3.6 V range supports compact embedded systems. Its integrated power-down mode can reduce activity when the voice function is not in use. Keep the analog input path short, provide the bypass capacitors specified by the manufacturer, and isolate digital return currents from microphone or line-band signals to preserve the available dynamic range.
সুপারিশকৃত
Telephony Interface Equipment
The PCM3500EG4 supports telephony interface equipment requiring compact, low-power voice-band conversion. Its single-channel 16-bit architecture fits line interfaces and voice-channel subsystems, while operation from a 3.3 V rail simplifies integration with communications logic. The device can also enter its integrated power-down mode during inactive periods, helping reduce system consumption. For a telephone interface, maintain controlled analog grounding and provide local supply bypass close to the codec pins. Review the manufacturer pin-description table and timing requirements before connecting the digital interface to the line-card controller.
সুপারিশকৃত
Voice Recording Terminal
PCM3500EG4 can serve as the voice recording interface in a compact terminal that captures one analog voice channel and transfers it as 16-bit serial data. The mono format is appropriate for speech recording and avoids the unused channel and playback controls associated with stereo codecs. Its low-voltage operation supports embedded 3.3 V equipment, and power-down mode can be used when recording is inactive. Position analog input components close to the device, use a quiet analog supply path, and verify clock and serial timing against the manufacturer datasheet before selecting host-controller settings.
সুপারিশকৃত
Time-Slot Voice Multiplexer
The PCM3500EG4 is suited to a time-slot voice multiplexer because as many as four devices can share one four-wire serial bus. Time Slot Mode uses a 64-bit long frame divided into four time slots, allowing one communications controller to service multiple voice channels while each codec retains a dedicated analog path. This arrangement is useful in compact telephony and multi-channel speech equipment where separate serial interfaces would consume excessive controller resources. Confirm device addressing, frame timing, and clocking in the manufacturer datasheet, and provide each codec with independent local bypass capacitance and a controlled analog return path.
সুপারিশকৃত
Portable Communication Device
PCM3500EG4 fits a portable communication device that operates from a low-voltage 3.3 V rail and needs one mono voice channel. Its 2.7 V to 3.6 V supply range, integrated power-down mode, and dedicated voice-band conversion make it suitable for compact handsets, portable terminals, and communication accessories. The device avoids the additional channels and functions required by a general-purpose multimedia codec. Supply-noise control remains important because reduced voltage headroom near the lower operating limit can lower the achieved signal-to-noise ratio. Use local bypass capacitance and separate noisy digital return currents from the analog input reference.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCM3500EG4 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PCM3500E |
|---|---|---|
| Brand | Texas Instruments | Texas Instruments |
| Package | SSOP-24 | SSOP-24 |
| Codec Type | Mono SoundPlus voice/modem codec | Mono SoundPlus voice/modem codec |
| Resolution | 16 bit | 16 bit |
| Supply Voltage Range | 2.7 V to 3.6 V | 2.7 V to 3.6 V |
| ADC Signal-to-Noise Ratio | 88 dB typical | 88 dB typical |
| Power-Down Mode | Integrated | Integrated |
| Time-Slot Interface Capacity | Up to 4 devices per four-wire serial bus | Up to 4 devices per four-wire serial bus |
| Ordering Relationship | PCM3500EG4 orderable designation | Identical product designation |
মূল পার্থক্যসমূহ
- Confirmed identical ordering option (বনামPCM3500E)
- Multi-device time-slot support (বনামPCM3500E)
- Purpose-built voice-band architecture (বনামPCM3500E)
ডিজাইন নোট
Design the PCM3500EG4 supply for a nominal 3.3 V rail while maintaining the full 2.7 V to 3.6 V operating range. Place the required bypass capacitors close to the supply and ground pins, and keep the analog and digital return paths controlled. Operation near 2.7 V leaves less analog headroom and increases sensitivity to supply disturbance, which can reduce the 88 dB typical ADC signal-to-noise ratio.
Keep the analog input path and associated passive components close to the codec, and route digital clock and data signals away from the voice-band input. Use a continuous ground reference where appropriate and prevent switching return current from flowing beneath the analog section. The SSOP package requires careful trace escape planning, so use the manufacturer land pattern and pin table rather than inferring connections from functional block diagrams.
Do not treat a general-purpose multimedia codec as an automatic replacement. The PCM3500EG4 is a dedicated mono voice-band device, so a different part can differ in analog levels, serial format, clock requirements, control pins, and package assignments. Before changing the design, compare the complete pin list, timing requirements, power-down behavior, and typical application circuit from the manufacturer datasheet.
কমপ্লায়েন্স তথ্য
The Texas Instruments product pages identify the PCM3500 family, but the retrieved material does not explicitly state the requested compliance classifications.