Texas Instruments

PCM3500EG4 - 16-Bit Mono Voice Codec | Texas Instruments

MPN: PCM3500EG4 ✓ פעיל
2.7 V to 3.6 V Vdss 24-pin SSOP Package
כמות הזמנה מינימלית: 1 |

PCM3500EG4 סקירה

Texas Instruments PCM3500EG4 is a low-voltage, low-power, 16-bit mono SoundPlus voice and modem codec operating from a 2.7 V to 3.6 V supply and housed in a 24-pin SSOP package. It supports voice-band signal conversion for modem analog front ends, speech processing, telephony, and other single-channel audio systems.

A voice or modem codec is an interface IC that converts analog audio into a digital serial stream and reconstructs an analog signal from digital audio data. In the signal-chain hierarchy, it belongs to the audio codec family within interface ICs and semiconductor signal-processing devices. The PCM3500EG4 combines a mono analog channel with a serial digital interface, providing a compact solution where low supply voltage, low power, or voice-band bandwidth is more important than stereo playback functionality.

The principal device characteristics include 16-bit resolution, mono operation, a 2.7 V to 3.6 V power-supply range, and a typical ADC signal-to-noise ratio of 88 dB. Integrated power-down capability reduces consumption when the voice channel is inactive. Its serial interface can also support time-slot arrangements in which as many as four PCM3500 devices share a four-wire interface bus using four positions in a 64-bit long frame.

PCM3500EG4 targets applications where a dedicated voice-band converter is preferable to a general-purpose multimedia codec. The mono architecture avoids the channels and controls required for stereo playback, while the 16-bit interface is suitable for speech and modem waveforms. Its low-voltage operation also makes it appropriate for portable communication equipment operating from a 3.3 V system rail.

Typical uses include modem analog front ends, speech-processing systems, telephone-interface equipment, voice-recording terminals, and compact communications controllers. In a modem or speech system, the codec can convert microphone-band or line-band audio to serial PCM data for a digital signal processor, while its decoding path reconstructs the analog voice signal. Multiple codecs can share a serial bus when time-slot multiplexing is required.

Power-supply noise deserves particular attention because operation at or near the 2.7 V minimum reduces analog headroom and can degrade the achievable signal-to-noise ratio. Place the required bypass capacitors close to the supply pins, keep analog and digital return-current paths controlled, and follow the pin-description and layout guidance in the manufacturer datasheet when assigning PCB tracks.

This product summary combines the PCM3500EG4 device identity, voltage and resolution requirements, voice-band use cases, interface-sharing capability, and practical power considerations to support component selection, schematic review, and footprint planning.

חלופות תחליף ישיר עבור PCM3500EG4 — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.

וריאנטים בסדרה זו

דגמים מאותה סדרה התואמים Drop-in עם PCM3500EG4 (אותו גורם צורה וטביעת רגל) — שונים ב Package, Channel Configuration.

Texas Instruments
Package: 24-SSOP (0.209 inch, 5.30 mm width)
Channel Configuration: Mono
השווה עם PCM3500EG4 →
Texas Instruments
Package: 24-pin SSOP (DB)

PCM3500E

✅ Drop-In
Texas Instruments
📦 SSOP-24
16-bit mono SoundPlus voice/modem codec · 16 bit · Mono · 2.7 V to 3.6 V · Delta-sigma modulator · 5th order · Mono single-to-differential converter · Fully differential delta-sigma modulator

צור קשר לקבלת מחיר

הצג גיליון נתונים ←

PCM3500EG4 מפרטים

Product Type Mono voice/modem audio codec
רזולוציה 16 bit
Channel Configuration 1 channel mono
Supply Voltage Range 2.7 V to 3.6 V
Nominal Supply Voltage 3.3 V
ADC Signal-to-Noise Ratio 88 dB typical
מארז 24-pin SSOP
סוג הרכבה Surface mount
Power-Down Mode Integrated
Time-Slot Interface Capacity Up to 4 codecs on one four-wire serial bus
Time-Slot Frame Length 64 bit
Number of Time Slots 4

מדריך תצורת פינים של PCM3500EG4 24-pin ssop

תצורת פינים עבור PCM3500EG4 (מארזת 24-pin ssop). מספרי פינים, פונקציות ותרשימי חיבורים מוגדרים ב-Datasheet של היצרן. יש לעיין בו לקבלת ה-footprint המדויק והנחיות הלחמה.

תרשים פינים של מארזת 24-pin ssop עבור PCM3500EG4

אין נתוני פריסת פינים מפורטים עבור PCM3500EG4.

עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.

יישומים טיפוסיים

PCM3500EG4 מתאים עבור 6 יישוםs: Modem Analog Front End, Speech-Processing Terminal, Telephony Interface Equipment, Voice Recording Terminal, Time-Slot Voice Multiplexer, Portable Communication Device.

🌐

Modem Analog Front End

The PCM3500EG4 fits a modem analog front end requiring one 16-bit mono voice-band conversion channel. Its 2.7 V to 3.6 V operating range accommodates a 3.3 V communications rail, while the 88 dB typical ADC signal-to-noise ratio provides useful dynamic range for transmitted speech and modem waveforms. Place the codec close to the line or microphone-band front end to minimize analog trace exposure. Its dedicated voice-band role avoids the channel count and feature overhead of a general-purpose stereo codec. The design should also preserve clean supply decoupling because operation near 2.7 V provides less analog headroom and can increase sensitivity to power-supply noise.

🗣️

Speech-Processing Terminal

PCM3500EG4 is appropriate for a speech-processing terminal that converts a single analog voice channel into 16-bit serial data for digital processing. The mono architecture matches typical speech-capture and playback channels without adding unnecessary stereo paths, and the 2.7 V to 3.6 V range supports compact embedded systems. Its integrated power-down mode can reduce activity when the voice function is not in use. Keep the analog input path short, provide the bypass capacitors specified by the manufacturer, and isolate digital return currents from microphone or line-band signals to preserve the available dynamic range.

📞

Telephony Interface Equipment

The PCM3500EG4 supports telephony interface equipment requiring compact, low-power voice-band conversion. Its single-channel 16-bit architecture fits line interfaces and voice-channel subsystems, while operation from a 3.3 V rail simplifies integration with communications logic. The device can also enter its integrated power-down mode during inactive periods, helping reduce system consumption. For a telephone interface, maintain controlled analog grounding and provide local supply bypass close to the codec pins. Review the manufacturer pin-description table and timing requirements before connecting the digital interface to the line-card controller.

🎙️

Voice Recording Terminal

PCM3500EG4 can serve as the voice recording interface in a compact terminal that captures one analog voice channel and transfers it as 16-bit serial data. The mono format is appropriate for speech recording and avoids the unused channel and playback controls associated with stereo codecs. Its low-voltage operation supports embedded 3.3 V equipment, and power-down mode can be used when recording is inactive. Position analog input components close to the device, use a quiet analog supply path, and verify clock and serial timing against the manufacturer datasheet before selecting host-controller settings.

🔀

Time-Slot Voice Multiplexer

The PCM3500EG4 is suited to a time-slot voice multiplexer because as many as four devices can share one four-wire serial bus. Time Slot Mode uses a 64-bit long frame divided into four time slots, allowing one communications controller to service multiple voice channels while each codec retains a dedicated analog path. This arrangement is useful in compact telephony and multi-channel speech equipment where separate serial interfaces would consume excessive controller resources. Confirm device addressing, frame timing, and clocking in the manufacturer datasheet, and provide each codec with independent local bypass capacitance and a controlled analog return path.

📱

Portable Communication Device

PCM3500EG4 fits a portable communication device that operates from a low-voltage 3.3 V rail and needs one mono voice channel. Its 2.7 V to 3.6 V supply range, integrated power-down mode, and dedicated voice-band conversion make it suitable for compact handsets, portable terminals, and communication accessories. The device avoids the additional channels and functions required by a general-purpose multimedia codec. Supply-noise control remains important because reduced voltage headroom near the lower operating limit can lower the achieved signal-to-noise ratio. Use local bypass capacitance and separate noisy digital return currents from the analog input reference.

What is the PCM3500EG4?
The PCM3500EG4 is a low-voltage, low-power, 16-bit mono SoundPlus voice/modem codec from Texas Instruments. According to the manufacturer datasheet, it operates from 2.7 V to 3.6 V and is packaged in a 24-pin SSOP. The device is intended for voice-band, speech-processing, modem, and related single-channel audio signal chains.
What are the key specifications of PCM3500EG4 that engineers should know?
The PCM3500EG4 provides 16-bit resolution, mono operation, and a 2.7 V to 3.6 V supply range. Its ADC signal-to-noise ratio is 88 dB typical, and the device includes an integrated power-down mode. The manufacturer datasheet also identifies support for a 64-bit long frame containing four time slots, allowing as many as four codecs to share a four-wire serial interface.
What supply voltage does PCM3500EG4 require?
The PCM3500EG4 requires a supply between 2.7 V and 3.6 V, with 3.3 V serving as the nominal operating point for the device family. According to the manufacturer datasheet, operation at or near 2.7 V leaves less analog headroom and increases sensitivity to supply noise, which may reduce the achieved signal-to-noise ratio relative to operation with more supply margin.
Where can I download the PCM3500EG4 datasheet PDF?
The official PCM3500EG4 datasheet is available from the Texas Instruments product-information link on this page. The manufacturer document describes the low-voltage, low-power, 16-bit mono voice/modem codec, its 2.7 V to 3.6 V supply range, analog and digital signal paths, power-down operation, and four-device time-slot interface arrangement. Use the manufacturer version for design sign-off and pin assignments.
Where can I find the PCM3500EG4 pinout?
Use the pin-description table in the official PCM3500 manufacturer datasheet to locate every signal on the 24-pin SSOP package. The search listing identifies the package as 24-pin SSOP but does not reproduce the complete numbered pin table. Confirm analog input and output pins, supply connections, ground pins, serial-interface signals, and control functions directly against the manufacturer document before laying out the PCB.
Can PCM3500EG4 be used for modem and speech applications?
Yes, the PCM3500EG4 is specifically optimized for voice-band modem analog front ends and speech-processing applications. Its mono 16-bit conversion path matches the single-channel requirements of many voice communication systems, while the low 2.7 V to 3.6 V operating range supports compact 3.3 V communications equipment. The manufacturer datasheet identifies power-down and time-slot operation as useful low-power and multi-channel features.
Can multiple PCM3500 devices share one serial interface?
Yes. The manufacturer datasheet states that up to four PCM3500 devices can share the same four-wire serial interface bus. Time Slot Mode uses a 64-bit long frame containing four time slots, allowing one controller to receive and transmit voice data for several codec channels. Each device still requires its own analog signal path and suitable bypass-capacitor arrangement.
What is the difference between PCM3500EG4 and PCM3500E?
Texas Instruments identifies PCM3500E and PCM3500EG4 as the same ordered device, so their manufacturer-specified electrical function and package are identical. PCM3500EG4 is the orderable suffix associated with the 24-pin SSOP configuration. The TI part-details page explicitly lists PCM3500EG4 as an equivalent designation for PCM3500E, making the distinction ordering nomenclature rather than a functional change.
PCM3500EG4 vs PCM3500E - which part should I order?
Choose PCM3500EG4 when your purchasing system or PCB documentation uses that exact orderable designation. According to the Texas Instruments part-details page, PCM3500E and PCM3500EG4 identify the same physical product, with PCM3500EG4 presented as the ordering name. Verify the package and suffix against your controlled bill of materials, but no electrical redesign is required solely because the ordering designations differ.
When should I choose PCM3500EG4 over a general-purpose audio codec?
Choose PCM3500EG4 when the design needs one 16-bit voice-band channel, a 2.7 V to 3.6 V supply, and low-power operation rather than stereo playback. It is a focused choice for modem analog front ends, speech processing, and telephony. A general-purpose audio codec may be preferable when the system requires stereo channels, playback features, microphone preamplifiers, or digital audio formats beyond the PCM3500 application set.
Is PCM3500EG4 suitable for a portable 3.3 V voice system?
The PCM3500EG4 is suitable for a portable 3.3 V voice system because its specified supply range includes 3.3 V and it includes an integrated power-down mode. Its mono voice-band architecture avoids unnecessary stereo circuitry. The power-supply design still needs to maintain low noise because insufficient voltage headroom or supply disturbance can reduce the available analog signal-to-noise ratio.
What is the best drop-in replacement for PCM3500EG4?
PCM3500E is the confirmed same-product drop-in ordering designation for PCM3500EG4, according to the Texas Instruments part-details page. No additional verified cross-manufacturer, 24-pin SSOP replacement with confirmed pin compatibility and matching 16-bit mono voice-band parameters was identified. Treat any redesign candidate as a functional comparison until its pinout, serial protocol, analog levels, and clock requirements have been verified against the manufacturer datasheet.
What can replace PCM3500EG4 in a modem design?
PCM3500E can replace PCM3500EG4 because Texas Instruments identifies both names as the same ordered product. A different codec should be considered only after checking package pins, analog input and output levels, serial data format, master-clock requirements, timing, and power sequencing. The PCM3500EG4 is a dedicated voice-band part, while general-purpose codecs may require software, layout, and signal-chain changes.
Where can I buy PCM3500EG4 and check its current availability?
Use the Request a Quote form on this page to request the current PCM3500EG4 quotation, lead time, minimum order quantity, and available package configuration. The form routes the request through XAIPART without embedding a static price or inventory claim. Provide the exact suffix PCM3500EG4 and the required quantity so the quote can be matched to the correct Texas Instruments orderable device.
What is the current price and lead time for PCM3500EG4?
Current commercial terms for PCM3500EG4 are obtained through the Request a Quote form on this page. Submit the exact part number, required quantity, shipment destination, and preferred delivery date to obtain a current quotation and lead-time response. Static online price figures can become stale, so the quote form provides the appropriate transaction channel for current sourcing and production planning.
Is PCM3500EG4 in stock?
Current PCM3500EG4 inventory status should be confirmed through the Request a Quote form on this page. Include the required quantity and target delivery date in the request so XAIPART can verify supply and production allocation. A distributor search-result page alone does not establish current stock, and no unsupported inventory state should be inferred from general product availability.

נתוני עזר הנדסיים עבור PCM3500EG4 — השוואה, הנחיות תכנון ומידע על תאימות.

מדריך בחירה

Choose PCM3500EG4 for a compact voice or modem design that requires one 16-bit mono channel, operation from a 2.7 V to 3.6 V supply, and an integrated power-down mode. PCM3500E is the preferred alternative when a purchasing system uses that designation because Texas Instruments identifies it as the same ordered product, not a different electrical version. Consider a dedicated multi-channel codec when several independent voice channels must be serviced, but verify its protocol and footprint rather than assuming compatibility. A general-purpose stereo codec is appropriate only when features such as multiple playback channels, programmable analog gain, or a broader audio interface set outweigh the PCM3500EG4's focused low-power voice architecture. For every option, verify serial timing, analog signal levels, clock requirements, power sequencing, and the complete PCB footprint.

השוואה עם חלופות

פרמטר מוצר זה PCM3500E
Brand Texas Instruments Texas Instruments
Package SSOP-24 SSOP-24
Codec Type Mono SoundPlus voice/modem codec Mono SoundPlus voice/modem codec
Resolution 16 bit 16 bit
Supply Voltage Range 2.7 V to 3.6 V 2.7 V to 3.6 V
ADC Signal-to-Noise Ratio 88 dB typical 88 dB typical
Power-Down Mode Integrated Integrated
Time-Slot Interface Capacity Up to 4 devices per four-wire serial bus Up to 4 devices per four-wire serial bus
Ordering Relationship PCM3500EG4 orderable designation Identical product designation

מבדילים עיקריים

  • Confirmed identical ordering option (לעומתPCM3500E)
  • Multi-device time-slot support (לעומתPCM3500E)
  • Purpose-built voice-band architecture (לעומתPCM3500E)

הערות תכנון

Design the PCM3500EG4 supply for a nominal 3.3 V rail while maintaining the full 2.7 V to 3.6 V operating range. Place the required bypass capacitors close to the supply and ground pins, and keep the analog and digital return paths controlled. Operation near 2.7 V leaves less analog headroom and increases sensitivity to supply disturbance, which can reduce the 88 dB typical ADC signal-to-noise ratio.

Keep the analog input path and associated passive components close to the codec, and route digital clock and data signals away from the voice-band input. Use a continuous ground reference where appropriate and prevent switching return current from flowing beneath the analog section. The SSOP package requires careful trace escape planning, so use the manufacturer land pattern and pin table rather than inferring connections from functional block diagrams.

Do not treat a general-purpose multimedia codec as an automatic replacement. The PCM3500EG4 is a dedicated mono voice-band device, so a different part can differ in analog levels, serial format, clock requirements, control pins, and package assignments. Before changing the design, compare the complete pin list, timing requirements, power-down behavior, and typical application circuit from the manufacturer datasheet.

מידע על תאימות

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
נטול עופרת
Unknown
נטול הלוגנים
Unknown
מינרלים של סכסוך
Unknown

The Texas Instruments product pages identify the PCM3500 family, but the retrieved material does not explicitly state the requested compliance classifications.

חיפושים קשורים

PCM3500EG4 datasheet PCM3500EG4 datasheet pdf PCM3500EG4 pinout Texas Instruments PCM3500EG4 PCM3500EG4 equivalent PCM3500EG4 replacement PCM3500EG4 vs PCM3500E PCM3500EG4 SSOP-24 footprint PCM3500EG4 16-bit mono codec PCM3500EG4 modem application PCM3500EG4 price PCM3500EG4 stock

רכיבים ומונחים קשורים

Texas Instruments PCM3500EG4 PCM3500E PCM3500 SoundPlus voice codec modem codec audio codec codec interface IC interface IC semiconductor 16-bit audio converter mono voice channel 2.7 V to 3.6 V power supply 88 dB ADC signal-to-noise ratio time-slot mode 64-bit long frame four-wire serial interface power-down mode SSOP-24 SSOP package family surface-mount package modem analog front end speech processing
בקשת הצעת מחיר מהירה
מלא את כל הפרטים — צוות המכירות שלנו יגיב תוך 24 שעות
מספר חלק יצרן מארז QTY מחיר יעד סה"כ
✓
הצעת המחיר נשלחה!

נשיב לדוא"ל שלך בתוך 24 שעות

1
בקשת הצעת מחיר נשלחה
2
הצעת מחיר התקבלה
3
ההזמנה בוצעה
4
תשלום
5
נשלח
6
נמסר
צפה בפרטי בקשת הצעת המחיר