Texas Instruments

PCM5100APWR - 32-Bit Stereo DAC | Texas Instruments

MPN: PCM5100APWR ✓ সক্রিয়
2.1 Vrms Vdss 20-pin TSSOP Package Integrated audio PLL with BCK reference and internal SCK generation Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PCM5100APWR সারাংশ

The Texas Instruments PCM5100APWR is a 32-bit stereo digital-to-analog converter supporting sampling rates up to 384 kHz, with 2.1 Vrms DirectPath output and a 100 dB dynamic range. The device accepts serial PCM audio through I2S-compatible interfaces and is packaged in a 20-pin TSSOP. Its integrated audio PLL provides system-clock generation, while the integrated negative charge pump supports the DirectPath output architecture without conventional output DC-blocking capacitors.

A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage that can drive headphones, powered speakers, or a subsequent audio amplifier. Within the signal-chain hierarchy, the PCM5100APWR is an audio DAC, a specialized data-converter IC used at the boundary between digital audio processing and analog amplification. Its direct line-level output simplifies designs that do not require an external codec or separate output-buffer stage.

The principal features include support for 16-, 24-, and 32-bit PCM data, operation up to 384 kHz, a 2.1 Vrms output, and 100 dB dynamic-range performance. The integrated PLL allows a bit clock reference to generate the internal system clock, which can simplify the digital-audio interface design. The 3 V to 3.6 V operating range is suited to compact consumer, networked-audio, and embedded audio products operating from a 3.3 V rail.

The PCM5100A architecture combines an integrated audio DAC, low-noise analog output, and digital interface in one package. DirectPath output removes the requirement for DC-blocking capacitors in the common line-output configuration, reducing component count and avoiding low-frequency impedance effects introduced by traditional capacitor-coupled outputs. The audio PLL and charge-pump blocks consolidate functions that otherwise require additional clock-generation and bias circuitry.

Typical applications include high-resolution digital audio players, USB and network audio accessories, Bluetooth audio receivers, compact consumer stereo systems, and line-level audio sources feeding powered speakers or headphone amplifiers. The 384 kHz capability is useful for high-resolution source material, while the 20-pin TSSOP package supports conventional surface-mount PCB assembly. The target product is also identified as a PCM5100A-family device with 2.1 Vrms DirectPath output and a 32-bit, 384 kHz PCM interface.

Designers should preserve the recommended analog and digital layout, provide clean supply decoupling, and route the analog output away from high-speed digital return currents. The integrated PLL makes clock planning important: use the interface timing and synchronization information in the manufacturer datasheet when connecting the PCM5100APWR to an audio master, and avoid substituting a device with different interface-voltage requirements without reviewing its clock and control implementation.

This product page consolidates the manufacturer specifications, package information, family-level replacement guidance, and practical application and layout considerations into one engineering reference. It also identifies where pin-level, electrical-limit, and lifecycle details must be confirmed directly against the PCM5100A manufacturer datasheet before release to production.

এর জন্য ড্রপ-ইন বিকল্প PCM5100APWR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PCM5100APWR (একই form factor এবং footprint) — পার্থক্য রয়েছে Dynamic Range, Output Type.

Texas Instruments
Dynamic Range: 112 dB
Output Type: Ground-centered, cap-free
এর সাথে তুলনা করুন PCM5100APWR →

PCM5102PWR

✅ ড্রপ-ইন
📦 TSSOP-20
Same 20-pin TSSOP package; PCM5100APWR and PCM5102PWR are both 32-bit, 384 kHz-class stereo DACs, while clock and interface features require final verification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

PCM5101APWR

✅ ড্রপ-ইন
📦 TSSOP-20
Same 20-pin TSSOP package and PCM510xA family; PCM5101APWR differs in integrated clock and interface options despite matching the 32-bit PCM DAC class

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

PCM5100AQPWRQ1

✅ ড্রপ-ইন
📦 TSSOP-20
Same 20-pin TSSOP package and 100 dB PCM5100A-family performance class; the Q1 designation adds automotive qualification while core audio ratings remain equivalent

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

PCM5100PWR

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 TSSOP-20
Same 20-pin TSSOP package and PCM5100 family; the original PCM5100 lacks the A-family upgrade reflected by the 32-bit, 384 kHz PCM5100APWR specification

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

PCM5100APWR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Device Type Stereo audio digital-to-analog converter
Supported PCM Word Lengths 16 bit, 24 bit, 32 bit
Maximum Sampling Rate 384 kHz
Dynamic Range 100 dB
আউটপুট টাইপ DirectPath stereo line output
Maximum Output Voltage 2.1 Vrms
Minimum Output Load 1 kΩ
অপারেটিং সাপ্লাই ভোল্টেজ 3 V to 3.6 V
Digital Audio Interface I2S-compatible serial PCM interface
Clock Architecture Integrated audio PLL with BCK reference and internal SCK generation
Bias Architecture Integrated negative charge pump
Output DC-Blocking Capacitors Not required for DirectPath operation
Channel Count 2 channels
পিন সংখ্যা 20 pins
Package Type 20-pin TSSOP
মাউন্টিং টাইপ Surface mount

PCM5100APWR 20-pin tssop পিন কনফিগারেশন গাইড

PCM5100APWR (20-pin tssop প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।

PCM5100APWR-এর জন্য 20-pin tssop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PCM5100APWR.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PCM5100APWR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: High-Resolution Network Audio Player, USB Audio Interface, Bluetooth Audio Receiver, Digital Audio Headphone Amplifier Front End, Powered Speaker Line-Level Source, Consumer Audio System with Digital Source.

🌐

High-Resolution Network Audio Player

PCM5100APWR fits a network-audio output stage that converts decoded PCM frames into a line-level analog signal. Its support for 16-, 24-, and 32-bit data at rates up to 384 kHz preserves the resolution and sampling-rate flexibility of high-resolution streaming sources, while the 100 dB dynamic range suits quiet musical passages. The integrated audio PLL can derive a system clock from the bit-clock reference, reducing the need for a separate audio-clock generator. Place the DAC close to the output connector and keep digital return paths away from the 2.1 Vrms analog outputs to limit noise coupling.

🖥️

USB Audio Interface

The PCM5100APWR can provide the stereo monitoring DAC for a USB audio interface when an upstream controller delivers PCM frames over an I2S-compatible link. Its 32-bit format handling and operation up to 384 kHz support high-resolution playback, while the integrated PLL supports synchronized clock generation within the digital audio subsystem. The 3 V to 3.6 V supply range allows operation from a 3.3 V rail. Designers should isolate USB data and power paths from the analog output, use the manufacturer-recommended decoupling network, and confirm clock ratios and latency behavior in the interface controller design.

📱

Bluetooth Audio Receiver

PCM5100APWR is suitable for the final stereo conversion stage of a Bluetooth audio receiver when the wireless audio processor outputs digital PCM data. Its low-noise DirectPath architecture converts the digital stream into a 2.1 Vrms line-level signal without conventional output DC-blocking capacitors. The 100 dB dynamic range and support for rates through 384 kHz provide useful margin for high-resolution sources. Keep the analog trace short and away from the Bluetooth radio and switching supply, maintain a continuous ground reference, and follow the datasheet’s recommended output and supply component values.

🎧

Digital Audio Headphone Amplifier Front End

PCM5100APWR can drive the input of a line-level headphone amplifier in a compact audio product. Its 2.1 Vrms DirectPath output provides a useful signal level without requiring an external codec, and the minimum specified load of 1 kΩ allows direct coupling to a suitably designed amplifier input. The 100 dB dynamic range helps preserve quiet-source contrast before headphone amplification. Verify the downstream amplifier’s input impedance, gain, and headroom, and keep headphone-driver return currents on a separate return path so switching noise does not enter the DAC output.

🔊

Powered Speaker Line-Level Source

For a powered speaker, PCM5100APWR converts digital source material into a 2.1 Vrms stereo line-level signal suitable for an input amplifier. The device supports 16-, 24-, and 32-bit PCM data at up to 384 kHz, allowing the source format to be maintained through the digital portion of the design. DirectPath operation removes the need for traditional series DC-blocking capacitors in the supported configuration. The output must still be checked against the amplifier’s gain, input impedance, and clipping headroom, while the analog ground reference should remain continuous between the DAC and power amplifier.

📺

Consumer Audio System with Digital Source

PCM5100APWR serves as the digital-to-analog endpoint in a consumer stereo system that receives PCM audio from a display, media module, or embedded processor. The integrated audio PLL reduces clock-generation complexity when the source supplies a suitable bit-clock reference, and the 32-bit interface accommodates high-resolution content. Its 20-pin TSSOP package supports compact surface-mount assembly, but careful partitioning remains essential: locate the analog output path away from processor and display switching nodes, use a quiet analog ground strategy, and verify startup, mute, and clock synchronization behavior in the system-level control logic.

What are the key specifications of PCM5100APWR that engineers should know?
The PCM5100APWR is a 32-bit stereo audio DAC that supports sampling rates up to 384 kHz and provides a 2.1 Vrms DirectPath output. According to the Texas Instruments PCM5100A product page and datasheet, it offers 100 dB dynamic range, an integrated audio PLL, a 3 V to 3.6 V supply range, and a 20-pin TSSOP package. The negative charge pump and DirectPath architecture eliminate conventional output DC-blocking capacitors.
Where can I download the PCM5100APWR datasheet PDF?
The official PCM5100A datasheet is available from Texas Instruments through the manufacturer product page and datasheet link for PCM5100A. It provides the authoritative pin descriptions, electrical characteristics, recommended application circuit, clock requirements, and layout guidance for PCM5100APWR. Search the PCM5100A family rather than the older PCM5100 designation because the A-family includes the 2.1 Vrms DirectPath output and updated 32-bit, 384 kHz interface features.
Where can I find the PCM5100APWR pinout?
The PCM5100APWR pinout is identified in the pin-configuration and pin-description sections of the Texas Instruments PCM5100A manufacturer datasheet. The component is a 20-pin TSSOP device, but individual pin numbers and signal names must be assigned from that table rather than inferred from another PCM5100-family member. Use the datasheet pin list when routing serial audio, clock, control, supply, ground, and analog-output nets.
What is the output voltage and dynamic range of PCM5100APWR?
PCM5100APWR provides a direct line-level output of 2.1 Vrms with 100 dB dynamic range. According to the Texas Instruments PCM5100A product page, the PCM5100A family also supports 32-bit data and sampling rates up to 384 kHz. The output can drive loads down to 1 kΩ, so the selected downstream amplifier should provide suitable input impedance and headroom for the intended signal level.
Does PCM5100APWR support I2S audio at 384 kHz?
Yes, PCM5100APWR supports a serial PCM audio interface compatible with I2S operation and accepts 16-, 24-, or 32-bit data at rates up to 384 kHz. The Texas Instruments PCM5100A documentation identifies an integrated audio PLL with a BCK reference for internal SCK generation. The source clock, bit-clock ratio, and synchronization mode must still be configured to satisfy the interface timing requirements in the datasheet.
Where can I buy PCM5100APWR and request current stock?
Use the Request a Quote form on this page to request PCM5100APWR availability, current lead time, and order quantities. The form connects the exact 20-pin TSSOP ordering code with your purchasing workflow without relying on static stock information that can change quickly. Provide the required quantity and target delivery location so the quotation reflects the appropriate order and logistics conditions.
What is the price of PCM5100APWR?
Current PCM5100APWR pricing is shown through the Request a Quote form on this page because commercial terms and availability can change with order quantity and market conditions. Enter the exact MPN, PCM5100APWR, and your required quantity to request a current quotation. The form also lets the buyer clarify packaging, delivery expectations, and any production-volume requirements without relying on a stale unit-price figure.
What is the lead time and minimum order quantity for PCM5100APWR?
The current lead time and minimum order quantity for PCM5100APWR should be requested through the Request a Quote form on this page. Manufacturing schedule, package choice, order quantity, and shipment destination can affect the commitment, so a fixed interval would not represent the actual order accurately. Identify the exact PCM5100APWR suffix when requesting the quotation to avoid ambiguity with other PCM5100-family variants.
Is PCM5100APWR in stock?
PCM5100APWR availability should be confirmed through the Request a Quote form on this page. The form supports a stock and lead-time inquiry for the exact MPN and requested quantity. Because inventory can be allocated between production orders and quotations, check current availability when placing the order rather than relying on a static listing state.
PCM5100APWR vs PCM5102PWR - which is better for an I2S audio design?
PCM5102PWR is the closest identified family alternative for the same 20-pin TSSOP class, while PCM5100APWR is specified for 32-bit audio up to 384 kHz, 2.1 Vrms output, and 100 dB dynamic range. The comparison pages identify PCM5102PWR as a possible replacement, but interface-voltage and feature differences should be checked against the manufacturer documents before substitution. The exact control, clock, and I/O compatibility determines whether a PCB revision is unnecessary.
What is the difference between PCM5100APWR and PCM5101APWR?
PCM5101APWR belongs to the same 20-pin TSSOP PCM510xA family and is identified as a close replacement candidate for PCM5100APWR. Both belong to the stereo DAC family supporting high-resolution digital audio, but their integrated PLL and clock-interface options differ. According to the manufacturer family documentation, use the ordering table and datasheet for each exact suffix to verify sample-rate limits, clock requirements, and control-pin behavior before treating either part as interchangeable.
When should I choose PCM5100APWR instead of PCM5102PWR?
Choose PCM5100APWR when the design specifically targets its 2.1 Vrms DirectPath output, 100 dB dynamic range, 32-bit operation, and up-to-384-kHz PCM interface. PCM5102PWR may be attractive when its documented clocking, voltage, and feature set better matches the system, but it should be selected only after confirming pin and interface compatibility. The comparison should emphasize actual system constraints rather than package similarity alone.
What can replace PCM5100APWR without changing the PCB?
The identified same-package candidates are PCM5100PWR, PCM5101APWR, PCM5102PWR, and PCM5100AQPWRQ1, but no substitute should be treated as guaranteed drop-in without checking the exact pin and interface functions. PCM5100APWR is a 20-pin TSSOP device with 3 V to 3.6 V operation, an integrated PLL, and a 2.1 Vrms DirectPath output. Compare the replacement’s supply voltage, clock architecture, digital interface, control pins, and output behavior against the target design.
Is PCM5100APWR the same as PCM5102PWR?
No, PCM5100APWR and PCM5102PWR are related stereo DACs, not identical devices. PCM5100APWR is specifically described as a 32-bit, 384 kHz, 2.1 Vrms DirectPath DAC with an integrated audio PLL, while PCM5102PWR has its own family-level clock and interface characteristics. A comparison document identifies it as a possible replacement, but exact operation requires reviewing the manufacturer datasheets and verifying the PCB-level functions.
Is there a verified cross-brand drop-in replacement for PCM5100APWR?
No verified cross-brand drop-in replacement for PCM5100APWR is established in the available cross-reference results. The identified candidates are Texas Instruments PCM5100-family parts, while generic cross-reference tools do not prove pin compatibility, 3 V to 3.6 V operation, PLL behavior, and 32-bit, 384 kHz interface equivalence. Request a quote for the exact original MPN and consult the manufacturer documentation before considering any cross-brand substitution.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PCM5100APWR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose PCM5100APWR for a compact, high-resolution stereo output that requires 32-bit PCM data, rates up to 384 kHz, 2.1 Vrms DirectPath output, and an integrated audio PLL. PCM5102PWR is a practical family candidate when its clocking and interface characteristics match the design more closely; review its exact pin functions and control behavior before reuse. PCM5101APWR should be considered only after confirming the required PLL and interface features. PCM5100AQPWRQ1 is the preferred choice when automotive qualification is required, while PCM5100PWR may suit legacy PCM5100 designs but does not provide the documented A-family upgrade specification. In every case, verify supply voltage, clock mode, pin behavior, output loading, and lifecycle requirements against the manufacturer datasheet.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য PCM5102PWR PCM5101APWR PCM5100AQPWRQ1 PCM5100PWR
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Package 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP 20-pin TSSOP
Device Type Stereo audio DAC Stereo audio DAC Stereo audio DAC Stereo audio DAC Stereo audio DAC

মূল পার্থক্যসমূহ

  • Specified high-resolution stereo conversion capability (বনামPCM5100PWR)
  • DirectPath output with no conventional output DC-blocking capacitors (বনামPCM5101APWR)
  • Automotive-qualified family option available (বনামPCM5102PWR)

ডিজাইন নোট

Partition the PCB so the PCM5100APWR analog outputs and their supporting components remain away from digital clocks, switching-regulator nodes, and high-speed return currents. Route left and right outputs as a balanced pair over a continuous reference plane, minimize vias, and place output-network components close to their corresponding pins. This separation is especially important because a 2.1 Vrms line-level output can reveal switching ripple or ground displacement that is hidden at lower signal levels.

Use the manufacturer-recommended supply-decoupling arrangement and provide a low-impedance 3.3 V rail within the 3 V to 3.6 V operating range. Place the smallest high-frequency bypass capacitor directly at the device supply pins and retain the recommended bulk capacitor near the power entry point. Estimated: no power figure can be assigned without the selected output voltage, load, and efficiency data, so thermal sizing must be based on the final operating mode rather than a generic value.

Treat PCM5100APWR as a clock-sensitive audio converter. The integrated PLL can generate an internal system clock from a bit-clock reference, but the source must still meet the required frequency, jitter, and synchronization limits stated in the manufacturer datasheet. Keep clock traces short, avoid crossing noisy power regions, and use a continuous ground reference. Verify startup and mute sequencing so the interface source does not begin transmitting before the DAC clock and supplies are stable.

Do not assume that a 20-pin TSSOP package alone proves replacement compatibility. Confirm every power, ground, serial-data, bit-clock, system-clock, mute, and mode-control connection against the exact alternative datasheet, and confirm that the output load is at least 1 kΩ. In particular, verify interface-voltage compatibility and clock behavior for PCM5102PWR or PCM5101APWR rather than changing only the component label on an existing PCB.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The PCM5100AQPWRQ1 automotive-family candidate has a Q1 qualification designation, but no explicit AEC-Q100 compliance statement is present. Other compliance fields remain unknown because they are not stated in the manufacturer-page excerpts.

ডেটা যাচাই করা হয়েছে: 2026-11-20 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

pcm5100a datasheet PCM5100APWR datasheet PCM5100APWR specifications PCM5100APWR pinout PCM5100APWR schematic PCM5100APWR equivalent PCM5100APWR replacement PCM5100APWR vs PCM5102PWR PCM5100APWR TSSOP-20 PCM5100APWR 384kHz I2S PCM5100APWR 2.1 Vrms output Texas Instruments PCM5100APWR PCM5100APWR price PCM5100APWR stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments PCM5100APWR PCM5100A PCM5102PWR PCM5101APWR PCM5100AQPWRQ1 PCM5100PWR digital-to-analog converter audio DAC stereo DAC DirectPath audio codec PCM audio interface I2S integrated audio PLL negative charge pump dynamic range output noise sampling rate 32-bit PCM 384 kHz 2.1 Vrms TSSOP-20 surface mount RoHS REACH AEC-Q100
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন