PCM5100APWR - 32-Bit Stereo DAC | Texas Instruments
Артикул: PCM5100APWR ✓ АктивенPCM5100APWR Обзор
A digital-to-analog converter, or DAC, converts digital audio samples into an analog voltage that can drive headphones, powered speakers, or a subsequent audio amplifier. Within the signal-chain hierarchy, the PCM5100APWR is an audio DAC, a specialized data-converter IC used at the boundary between digital audio processing and analog amplification. Its direct line-level output simplifies designs that do not require an external codec or separate output-buffer stage.
The principal features include support for 16-, 24-, and 32-bit PCM data, operation up to 384 kHz, a 2.1 Vrms output, and 100 dB dynamic-range performance. The integrated PLL allows a bit clock reference to generate the internal system clock, which can simplify the digital-audio interface design. The 3 V to 3.6 V operating range is suited to compact consumer, networked-audio, and embedded audio products operating from a 3.3 V rail.
The PCM5100A architecture combines an integrated audio DAC, low-noise analog output, and digital interface in one package. DirectPath output removes the requirement for DC-blocking capacitors in the common line-output configuration, reducing component count and avoiding low-frequency impedance effects introduced by traditional capacitor-coupled outputs. The audio PLL and charge-pump blocks consolidate functions that otherwise require additional clock-generation and bias circuitry.
Typical applications include high-resolution digital audio players, USB and network audio accessories, Bluetooth audio receivers, compact consumer stereo systems, and line-level audio sources feeding powered speakers or headphone amplifiers. The 384 kHz capability is useful for high-resolution source material, while the 20-pin TSSOP package supports conventional surface-mount PCB assembly. The target product is also identified as a PCM5100A-family device with 2.1 Vrms DirectPath output and a 32-bit, 384 kHz PCM interface.
Designers should preserve the recommended analog and digital layout, provide clean supply decoupling, and route the analog output away from high-speed digital return currents. The integrated PLL makes clock planning important: use the interface timing and synchronization information in the manufacturer datasheet when connecting the PCM5100APWR to an audio master, and avoid substituting a device with different interface-voltage requirements without reviewing its clock and control implementation.
This product page consolidates the manufacturer specifications, package information, family-level replacement guidance, and practical application and layout considerations into one engineering reference. It also identifies where pin-level, electrical-limit, and lifecycle details must be confirmed directly against the PCM5100A manufacturer datasheet before release to production.
Аналоги без доработки для PCM5100APWR — тот же корпус, pin-to-pin совместимость. Компоненты в других корпусах, требующие переработки PCB, исключены.
Варианты в этой серии
Модели той же серии, совместимые без доработки с PCM5100APWR (тот же форм-фактор и посадочное место) — отличается по Dynamic Range, Output Type.
PCM5102PWR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PCM5101APWR
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PCM5100AQPWRQ1
✅ Прямая замена📋 Справочный аналог (нет в каталоге)
PCM5100PWR
✅ Прямая замена ⚠️ Характеристики не проверены📋 Справочный аналог (нет в каталоге)
PCM5100APWR Максимальные параметры и электрические характеристики
| Device Type | Stereo audio digital-to-analog converter |
| Supported PCM Word Lengths | 16 bit, 24 bit, 32 bit |
| Maximum Sampling Rate | 384 kHz |
| Dynamic Range | 100 dB |
| Тип выхода | DirectPath stereo line output |
| Maximum Output Voltage | 2.1 Vrms |
| Minimum Output Load | 1 kΩ |
| Рабочее напряжение питания | 3 V to 3.6 V |
| Digital Audio Interface | I2S-compatible serial PCM interface |
| Clock Architecture | Integrated audio PLL with BCK reference and internal SCK generation |
| Bias Architecture | Integrated negative charge pump |
| Output DC-Blocking Capacitors | Not required for DirectPath operation |
| Channel Count | 2 channels |
| Число выводов | 20 pins |
| Package Type | 20-pin TSSOP |
| Тип монтажа | Surface mount |
Руководство по цоколевке PCM5100APWR в корпусе 20-pin tssop
Цоколевка для PCM5100APWR (корпус 20-pin tssop). Этот аналоговый компонент имеет выводы входа, выхода и питания. Обратитесь к техническому описанию производителя для конфигураций выводов балансировки нуля, коррекции и разрешения. Идеально подходит для схем обработки сигналов и усилителей.
Нет подробных данных о распиновке для PCM5100APWR.
Обратитесь к даташиту для полной конфигурации выводов.
Типичное применение
PCM5100APWR подходит для 6 применениеs: High-Resolution Network Audio Player, USB Audio Interface, Bluetooth Audio Receiver, Digital Audio Headphone Amplifier Front End, Powered Speaker Line-Level Source, Consumer Audio System with Digital Source.
High-Resolution Network Audio Player
PCM5100APWR fits a network-audio output stage that converts decoded PCM frames into a line-level analog signal. Its support for 16-, 24-, and 32-bit data at rates up to 384 kHz preserves the resolution and sampling-rate flexibility of high-resolution streaming sources, while the 100 dB dynamic range suits quiet musical passages. The integrated audio PLL can derive a system clock from the bit-clock reference, reducing the need for a separate audio-clock generator. Place the DAC close to the output connector and keep digital return paths away from the 2.1 Vrms analog outputs to limit noise coupling.
Рекомендуется
USB Audio Interface
The PCM5100APWR can provide the stereo monitoring DAC for a USB audio interface when an upstream controller delivers PCM frames over an I2S-compatible link. Its 32-bit format handling and operation up to 384 kHz support high-resolution playback, while the integrated PLL supports synchronized clock generation within the digital audio subsystem. The 3 V to 3.6 V supply range allows operation from a 3.3 V rail. Designers should isolate USB data and power paths from the analog output, use the manufacturer-recommended decoupling network, and confirm clock ratios and latency behavior in the interface controller design.
Рекомендуется
Bluetooth Audio Receiver
PCM5100APWR is suitable for the final stereo conversion stage of a Bluetooth audio receiver when the wireless audio processor outputs digital PCM data. Its low-noise DirectPath architecture converts the digital stream into a 2.1 Vrms line-level signal without conventional output DC-blocking capacitors. The 100 dB dynamic range and support for rates through 384 kHz provide useful margin for high-resolution sources. Keep the analog trace short and away from the Bluetooth radio and switching supply, maintain a continuous ground reference, and follow the datasheet’s recommended output and supply component values.
Рекомендуется
Digital Audio Headphone Amplifier Front End
PCM5100APWR can drive the input of a line-level headphone amplifier in a compact audio product. Its 2.1 Vrms DirectPath output provides a useful signal level without requiring an external codec, and the minimum specified load of 1 kΩ allows direct coupling to a suitably designed amplifier input. The 100 dB dynamic range helps preserve quiet-source contrast before headphone amplification. Verify the downstream amplifier’s input impedance, gain, and headroom, and keep headphone-driver return currents on a separate return path so switching noise does not enter the DAC output.
Рекомендуется
Powered Speaker Line-Level Source
For a powered speaker, PCM5100APWR converts digital source material into a 2.1 Vrms stereo line-level signal suitable for an input amplifier. The device supports 16-, 24-, and 32-bit PCM data at up to 384 kHz, allowing the source format to be maintained through the digital portion of the design. DirectPath operation removes the need for traditional series DC-blocking capacitors in the supported configuration. The output must still be checked against the amplifier’s gain, input impedance, and clipping headroom, while the analog ground reference should remain continuous between the DAC and power amplifier.
Рекомендуется
Consumer Audio System with Digital Source
PCM5100APWR serves as the digital-to-analog endpoint in a consumer stereo system that receives PCM audio from a display, media module, or embedded processor. The integrated audio PLL reduces clock-generation complexity when the source supplies a suitable bit-clock reference, and the 32-bit interface accommodates high-resolution content. Its 20-pin TSSOP package supports compact surface-mount assembly, but careful partitioning remains essential: locate the analog output path away from processor and display switching nodes, use a quiet analog ground strategy, and verify startup, mute, and clock synchronization behavior in the system-level control logic.
Рекомендуется
Сводка рекомендуемых товаров
Справочные инженерные данные для PCM5100APWR — сравнение, рекомендации по проектированию и информация о соответствии.
Руководство по выбору
Сравнение с аналогами
| Параметр | Этот товар | PCM5102PWR | PCM5101APWR | PCM5100AQPWRQ1 | PCM5100PWR |
|---|---|---|---|---|---|
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Package | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP | 20-pin TSSOP |
| Device Type | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC | Stereo audio DAC |
Ключевые отличия
- Specified high-resolution stereo conversion capability (против PCM5100PWR)
- DirectPath output with no conventional output DC-blocking capacitors (против PCM5101APWR)
- Automotive-qualified family option available (против PCM5102PWR)
Заметки по проектированию
Partition the PCB so the PCM5100APWR analog outputs and their supporting components remain away from digital clocks, switching-regulator nodes, and high-speed return currents. Route left and right outputs as a balanced pair over a continuous reference plane, minimize vias, and place output-network components close to their corresponding pins. This separation is especially important because a 2.1 Vrms line-level output can reveal switching ripple or ground displacement that is hidden at lower signal levels.
Use the manufacturer-recommended supply-decoupling arrangement and provide a low-impedance 3.3 V rail within the 3 V to 3.6 V operating range. Place the smallest high-frequency bypass capacitor directly at the device supply pins and retain the recommended bulk capacitor near the power entry point. Estimated: no power figure can be assigned without the selected output voltage, load, and efficiency data, so thermal sizing must be based on the final operating mode rather than a generic value.
Treat PCM5100APWR as a clock-sensitive audio converter. The integrated PLL can generate an internal system clock from a bit-clock reference, but the source must still meet the required frequency, jitter, and synchronization limits stated in the manufacturer datasheet. Keep clock traces short, avoid crossing noisy power regions, and use a continuous ground reference. Verify startup and mute sequencing so the interface source does not begin transmitting before the DAC clock and supplies are stable.
Do not assume that a 20-pin TSSOP package alone proves replacement compatibility. Confirm every power, ground, serial-data, bit-clock, system-clock, mute, and mode-control connection against the exact alternative datasheet, and confirm that the output load is at least 1 kΩ. In particular, verify interface-voltage compatibility and clock behavior for PCM5102PWR or PCM5101APWR rather than changing only the component label on an existing PCB.
Информация о соответствии
The PCM5100AQPWRQ1 automotive-family candidate has a Q1 qualification designation, but no explicit AEC-Q100 compliance statement is present. Other compliance fields remain unknown because they are not stated in the manufacturer-page excerpts.