PEX8780-AB80BI - 80-Lane PCIe 3.0 Switch | Broadcom
MPN: PEX8780-AB80BI ✓ সক্রিয়PEX8780-AB80BI সারাংশ
A PCI Express switch is a semiconductor in the Interface ICs category that routes high-speed lane traffic between a host bus and multiple endpoints. The PEX8780 sits within the PCIe fabric hierarchy, where switching fabric, protocol conversion, clocking, and flow control work together to preserve transactional and data-transfer performance. Its 80-lane, 20-port architecture supports fan-out, aggregation, and peer-to-peer topologies rather than a simple point-to-point link.
The Gen 3 operating rate provides 8.0 GT/s signaling per lane, while the large lane count allows high-bandwidth endpoints to be distributed across multiple ports. Multi-host capability lets separate host domains connect to their respective endpoints through one switching device. This architecture can reduce board-level switch counts, improve topology flexibility, and support scalable server or storage interconnections when the system design, firmware, and electrical implementation are properly configured.
Broadcom describes the PEX8780 as a scalable, high-bandwidth, non-blocking PCIe interconnect. Its switching resources are intended to support multiple concurrent communication paths, making it appropriate for systems in which aggregate throughput and predictable routing matter more than minimizing silicon cost or package size. The exact lane allocation among ports and downstream configurations depends on the selected operating mode and reference design.
Typical uses include server backplanes, storage systems, communications platforms, PCIe expansion equipment, and peer-to-peer processing systems. The PEX8780 is particularly relevant when a platform must connect multiple compute hosts to dedicated accelerators, storage controllers, network interfaces, or other PCIe endpoints while preserving independent traffic paths and flexible downstream bandwidth allocation.
Board integration requires careful signal-integrity and power planning for a large, high-speed switch in a fine-pitch ball-grid-array package. Differential pairs, reference-plane continuity, connector or package-transition geometry, decoupling, power sequencing, and thermal management must follow Broadcom's published layout and reference-design guidance. Signal-integrity validation should include insertion loss, return loss, crosstalk, jitter, and eye-margin analysis across the intended operating conditions.
This page combines Broadcom product facts with application guidance, engineering design notes, comparison parameters, and substitution constraints. It focuses on the practical decisions an integrator must make when integrating an 80-lane, 20-port PCIe Gen 3 switching platform into a high-bandwidth server, storage, or communications system.
এর জন্য ড্রপ-ইন বিকল্প PEX8780-AB80BI — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
PEX8780-AB80BI-G
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PEX8764-AB80BI
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PEX8780-AB80BI সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| PCI Express Generation | Gen 3 |
| Maximum Per-Lane Signaling Rate | 8.0 GT/s |
| Total PCIe Lane Count | 80 lanes |
| Port Count | 20 ports |
| Switching Architecture | Multi-host, non-blocking |
| Supported Topology | Fan-out, aggregation, and peer-to-peer |
| Primary Application Class | Server, storage, and communications platforms |
| ইন্টারফেস টাইপ | PCI Express switch |
| Manufacturer | Broadcom |
| Product Family | ExpressLane PEX8780 |
PEX8780-AB80BI standard পিন কনফিগারেশন গাইড
PEX8780-AB80BI (standard প্যাকেজ)-এর পিন কনফিগারেশন। এই অ্যানালগ কম্পোনেন্টে ইনপুট, আউটপুট ও পাওয়ার সাপ্লাই পিন রয়েছে। অফসেট নাল, কম্পেনসেশন ও এনেবল পিন কনফিগারেশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। সিগন্যাল কন্ডিশনিং ও অ্যামপ্লিফায়ার সার্কিটের জন্য আদর্শ।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PEX8780-AB80BI.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PEX8780-AB80BI এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Multi-Host Server Backplanes, PCIe Storage Aggregation, Communications Platform Interconnect, PCIe Expansion Chassis, Peer-to-Peer Processing Systems, Server-to-Accelerator Consolidation.
Multi-Host Server Backplanes
The PEX8780-AB80BI fits multi-host server backplanes that need numerous PCIe paths distributed among compute hosts and endpoint devices. Its 80 lanes and 20 ports provide a large switching fabric at 8.0 GT/s per Gen 3 lane, while the multi-host architecture supports independent host-to-endpoint routing. This is valuable when a system must connect several hosts to dedicated accelerators, storage controllers, or network interfaces without relying on a collection of isolated switch devices. The implementation should map lane widths to endpoint requirements carefully, preserve continuous reference planes, and validate operation under concurrent traffic rather than only lightly loaded conditions.
PCIe Storage Aggregation
The PEX8780-AB80BI is appropriate for storage aggregation systems that combine multiple PCIe endpoints behind a scalable switching fabric. Its non-blocking architecture and 80 available lanes can support fan-out arrangements for storage controllers, while 20 ports provide room for downstream endpoint connections. Broadcom identifies storage systems as a key application for the PEX8780, making it a better fit than a small PCIe switch when several hosts must reach storage resources concurrently. Designers should balance lanes per endpoint, support the intended PCIe link widths, and test congestion behavior with realistic mixed read and write workloads.
Communications Platform Interconnect
The PEX8780-AB80BI can support communications platforms requiring high-bandwidth PCIe routing among line cards, fabric controllers, security engines, and host processors. Its 20 ports and 80 lanes allow a topology to aggregate traffic, fan out endpoint connections, or establish peer-to-peer routes without relying on a one-to-one host topology. The 8.0 GT/s Gen 3 rate is especially relevant when several PCIe domains must operate concurrently. Successful deployment depends on platform firmware, reference-clock distribution, route configuration, and loss-control validation across board-to-board and connector transitions.
PCIe Expansion Chassis
The PEX8780-AB80BI is suitable for advanced PCIe expansion chassis that need to expose multiple downstream devices through one high-capacity fabric. Its 80 lanes and 20 ports can support mixed endpoint populations behind a host connection, including accelerators, capture devices, and network controllers. Compared with a four- or eight-lane switch, the PEX8780 provides substantially more routing capacity, making it suitable for chassis designed for expansion rather than a single add-in card. Physical implementation should account for connector loss, package transitions, reference-clock quality, and the thermal output of a high-performance switch operating under sustained traffic.
Peer-to-Peer Processing Systems
The PEX8780-AB80BI supports peer-to-peer processing architectures in which multiple PCIe functions exchange data through a common switch fabric. Broadcom document 12351859 explicitly identifies peer-to-peer applications, while the 80-lane capacity provides routing flexibility for accelerator-to-accelerator and processor-to-storage communication. This topology can reduce reliance on a single host as the intermediary for selected transfers. Integration requires firmware and operating-system support for the intended routing model, correct port and lane mapping, and stress testing to confirm that concurrent paths deliver the expected performance.
Server-to-Accelerator Consolidation
The PEX8780-AB80BI can consolidate server access to multiple PCIe accelerators through a shared high-capacity switch. Its 20 ports allow several accelerator endpoints to coexist, and the 80-lane fabric can support wider allocations than a smaller switch when endpoints require substantial bandwidth. This arrangement is useful in compute-dense systems that need clear isolation between host domains and consistent routing to each accelerator. Engineering validation should include lane-width negotiation, power-state transitions, thermal margins, and workload testing under simultaneous accelerator activity so congestion does not create unpredictable latency.
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PEX8780-AB80BI — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PEX8780-AB80BI-G | PEX8764-AB80BI |
|---|---|---|---|
| Brand | Broadcom | Broadcom | Broadcom |
| Package | FCBGA-676 | FCBGA-676 | FCBGA-676 |
| Total Lane Count | 80 lanes | 80 lanes | 64 lanes |
| PCI Express Generation | Gen 3 | Gen 3 | Gen 3 |
| Maximum Per-Lane Rate | 8.0 GT/s | 8.0 GT/s | 8.0 GT/s |
মূল পার্থক্যসমূহ
- Higher switching capacity than the PEX8764 option (বনামPEX8764-AB80BI)
- More PCIe ports for endpoint fan-out (বনামPEX8764-AB80BI)
- Explicit multi-host and non-blocking positioning (বনামPEX8748-CA80BCG)
ডিজাইন নোট
Treat the PCIe links as a complete channel from the PEX8780 package through PCB traces, connectors, and any retimers. Use the Broadcom-referenced layer stack, transmission-line geometry, via transitions, and reference-plane continuity as the starting point. Validate insertion loss, return loss, differential crosstalk, jitter, and eye width at the intended PCIe Gen 3 signaling rate.
Implement the manufacturer-recommended multi-rail power network with local high-frequency decoupling placed directly at each supply and ground ball group. Preserve the specified voltage tolerances and power-up sequencing, and separate sensitive reference-clock and I/O supply paths from noisy sources where the reference design recommends it. Confirm steady-state and transient current under worst-case traffic before finalizing power components.
Evaluate junction temperature using the device power, package thermal characteristics, PCB copper area, airflow, and the maximum ambient condition. A high-bandwidth switch can consume more power while operating under sustained traffic than during light loading, so thermal calculations should use worst-case utilization rather than idle power. Follow the Broadcom layout guidance for exposed-pad connections and thermal-via placement.
Do not treat a switch with the same ball count as a drop-in replacement without checking the lane matrix, auxiliary signals, reference clocks, power balls, and configuration interfaces. The PEX8748-CA80BCG has 48 lanes rather than 80, and the PEX8734-AB80BIG has 32 lanes rather than 80; either choice can require a different board configuration even before software and firmware differences are considered.
কমপ্লায়েন্স তথ্য
No target-part compliance declarations were stated. Qualification markings and package terminal-finish details must be confirmed from the exact ordering code and manufacturer documentation before production release.