Broadcom

PEX8780-AB80BI - 80-Lane PCIe 3.0 Switch | Broadcom

部品番号: PEX8780-AB80BI ✓ 生産中
MOQ: 1 |

PEX8780-AB80BI 概要

Broadcom PEX8780-AB80BI is an ExpressLane PCI Express Gen 3 switching IC with 80 lanes, 20 ports, and an 8.0 GT/s per-lane signaling rate. It provides multi-host PCIe switching in a high-density FCBGA package for systems that need scalable, non-blocking interconnection between multiple hosts and their endpoint devices. The device is intended for advanced server, storage, and communications platforms.

A PCI Express switch is a semiconductor in the Interface ICs category that routes high-speed lane traffic between a host bus and multiple endpoints. The PEX8780 sits within the PCIe fabric hierarchy, where switching fabric, protocol conversion, clocking, and flow control work together to preserve transactional and data-transfer performance. Its 80-lane, 20-port architecture supports fan-out, aggregation, and peer-to-peer topologies rather than a simple point-to-point link.

The Gen 3 operating rate provides 8.0 GT/s signaling per lane, while the large lane count allows high-bandwidth endpoints to be distributed across multiple ports. Multi-host capability lets separate host domains connect to their respective endpoints through one switching device. This architecture can reduce board-level switch counts, improve topology flexibility, and support scalable server or storage interconnections when the system design, firmware, and electrical implementation are properly configured.

Broadcom describes the PEX8780 as a scalable, high-bandwidth, non-blocking PCIe interconnect. Its switching resources are intended to support multiple concurrent communication paths, making it appropriate for systems in which aggregate throughput and predictable routing matter more than minimizing silicon cost or package size. The exact lane allocation among ports and downstream configurations depends on the selected operating mode and reference design.

Typical uses include server backplanes, storage systems, communications platforms, PCIe expansion equipment, and peer-to-peer processing systems. The PEX8780 is particularly relevant when a platform must connect multiple compute hosts to dedicated accelerators, storage controllers, network interfaces, or other PCIe endpoints while preserving independent traffic paths and flexible downstream bandwidth allocation.

Board integration requires careful signal-integrity and power planning for a large, high-speed switch in a fine-pitch ball-grid-array package. Differential pairs, reference-plane continuity, connector or package-transition geometry, decoupling, power sequencing, and thermal management must follow Broadcom's published layout and reference-design guidance. Signal-integrity validation should include insertion loss, return loss, crosstalk, jitter, and eye-margin analysis across the intended operating conditions.

This page combines Broadcom product facts with application guidance, engineering design notes, comparison parameters, and substitution constraints. It focuses on the practical decisions an integrator must make when integrating an 80-lane, 20-port PCIe Gen 3 switching platform into a high-bandwidth server, storage, or communications system.

ドロップイン代替品: PEX8780-AB80BI — 同一パッケージでピン互換。PCBの作り直しが必要な異なるパッケージの部品は除外されています。

PEX8780-AB80BI-G

✅ ドロップイン
📦 FCBGA-676
Identical 80-lane and 20-port PEX8780 device family with a G ordering suffix; no electrical difference was identified

📋 参考代替品(カタログ未掲載)

PEX8764-AB80BI

✅ ドロップイン ⚠️ 仕様未検証
Broadcom
📦 FCBGA-676
PCI Express multi-root switch IC · Gen 3 · 8.0 GT/s · 64 lanes · 16 ports · Multi-host · Non-blocking · 1156-FCBGA (35x35 mm)

価格はお問い合わせください

データシートを見る →

PEX8780-AB80BI 最大定格&電気的特性

PCI Express Generation Gen 3
Maximum Per-Lane Signaling Rate 8.0 GT/s
Total PCIe Lane Count 80 lanes
Port Count 20 ports
Switching Architecture Multi-host, non-blocking
Supported Topology Fan-out, aggregation, and peer-to-peer
Primary Application Class Server, storage, and communications platforms
インターフェースタイプ PCI Express switch
Manufacturer Broadcom
Product Family ExpressLane PEX8780

PEX8780-AB80BI standard ピン配置ガイド

PEX8780-AB80BI (standard パッケージ) のピン配置。 このアナログコンポーネントは、入力、出力、および電源ピンを備えています。オフセットナル、補償、イネーブルピンの設定については、メーカーのデータシートを参照してください。信号調整やアンプ回路に最適です。

PEX8780-AB80BI の standard パッケージピン配置図

詳細なピン配置データはありません: PEX8780-AB80BI.

詳細は データシート をご参照ください。

主な用途

PEX8780-AB80BI の用途: 6 件s: Multi-Host Server Backplanes, PCIe Storage Aggregation, Communications Platform Interconnect, PCIe Expansion Chassis, Peer-to-Peer Processing Systems, Server-to-Accelerator Consolidation.

🖥️

Multi-Host Server Backplanes

The PEX8780-AB80BI fits multi-host server backplanes that need numerous PCIe paths distributed among compute hosts and endpoint devices. Its 80 lanes and 20 ports provide a large switching fabric at 8.0 GT/s per Gen 3 lane, while the multi-host architecture supports independent host-to-endpoint routing. This is valuable when a system must connect several hosts to dedicated accelerators, storage controllers, or network interfaces without relying on a collection of isolated switch devices. The implementation should map lane widths to endpoint requirements carefully, preserve continuous reference planes, and validate operation under concurrent traffic rather than only lightly loaded conditions.

💾

PCIe Storage Aggregation

The PEX8780-AB80BI is appropriate for storage aggregation systems that combine multiple PCIe endpoints behind a scalable switching fabric. Its non-blocking architecture and 80 available lanes can support fan-out arrangements for storage controllers, while 20 ports provide room for downstream endpoint connections. Broadcom identifies storage systems as a key application for the PEX8780, making it a better fit than a small PCIe switch when several hosts must reach storage resources concurrently. Designers should balance lanes per endpoint, support the intended PCIe link widths, and test congestion behavior with realistic mixed read and write workloads.

🌐

Communications Platform Interconnect

The PEX8780-AB80BI can support communications platforms requiring high-bandwidth PCIe routing among line cards, fabric controllers, security engines, and host processors. Its 20 ports and 80 lanes allow a topology to aggregate traffic, fan out endpoint connections, or establish peer-to-peer routes without relying on a one-to-one host topology. The 8.0 GT/s Gen 3 rate is especially relevant when several PCIe domains must operate concurrently. Successful deployment depends on platform firmware, reference-clock distribution, route configuration, and loss-control validation across board-to-board and connector transitions.

🔧

PCIe Expansion Chassis

The PEX8780-AB80BI is suitable for advanced PCIe expansion chassis that need to expose multiple downstream devices through one high-capacity fabric. Its 80 lanes and 20 ports can support mixed endpoint populations behind a host connection, including accelerators, capture devices, and network controllers. Compared with a four- or eight-lane switch, the PEX8780 provides substantially more routing capacity, making it suitable for chassis designed for expansion rather than a single add-in card. Physical implementation should account for connector loss, package transitions, reference-clock quality, and the thermal output of a high-performance switch operating under sustained traffic.

⚡

Peer-to-Peer Processing Systems

The PEX8780-AB80BI supports peer-to-peer processing architectures in which multiple PCIe functions exchange data through a common switch fabric. Broadcom document 12351859 explicitly identifies peer-to-peer applications, while the 80-lane capacity provides routing flexibility for accelerator-to-accelerator and processor-to-storage communication. This topology can reduce reliance on a single host as the intermediary for selected transfers. Integration requires firmware and operating-system support for the intended routing model, correct port and lane mapping, and stress testing to confirm that concurrent paths deliver the expected performance.

🏭

Server-to-Accelerator Consolidation

The PEX8780-AB80BI can consolidate server access to multiple PCIe accelerators through a shared high-capacity switch. Its 20 ports allow several accelerator endpoints to coexist, and the 80-lane fabric can support wider allocations than a smaller switch when endpoints require substantial bandwidth. This arrangement is useful in compute-dense systems that need clear isolation between host domains and consistent routing to each accelerator. Engineering validation should include lane-width negotiation, power-state transitions, thermal margins, and workload testing under simultaneous accelerator activity so congestion does not create unpredictable latency.

What is the PEX8780-AB80BI?
The PEX8780-AB80BI is a Broadcom ExpressLane PCI Express Gen 3 switch with 80 lanes and 20 ports. According to Broadcom document 12351859, it provides multi-host PCIe switching with scalable, high-bandwidth, non-blocking interconnection. It is intended for systems requiring multiple hosts, endpoints, and communication paths rather than a simple point-to-point PCIe connection.
What is the maximum data rate of the PEX8780-AB80BI?
The PEX8780-AB80BI supports 8.0 GT/s per PCIe Gen 3 lane. Broadcom's PEX8780 documentation identifies the device as a Gen 3 PCI Express switch with 80 lanes and 20 ports. Actual application throughput also depends on lane allocation, protocol overhead, endpoint behavior, reference-clock quality, and the electrical performance of the complete interconnect.
Where can I download the PEX8780-AB80BI datasheet?
The official Broadcom PEX8780 documentation is available at https://docs.broadcom.com/doc/12351859. It describes the ExpressLane switch's 80-lane, 20-port, multi-host architecture and its suitability for servers, storage systems, communications platforms, fan-out, aggregation, and peer-to-peer applications. Use the pin-description table and layout guidance in that documentation when beginning the PCB design.
Where can I find the PEX8780-AB80BI pinout?
Use the package drawings and pin-description table in Broadcom document 12351859 for authoritative PEX8780-AB80BI pin assignments. The package drawing identifies ball locations, while the accompanying table defines power, ground, reference-clock, PCIe-lane, and control connections. Do not infer the ball map from a similarly named PCIe switch because lane configuration and auxiliary signals can differ.
What applications are suitable for the PEX8780-AB80BI?
The PEX8780-AB80BI is suitable for server backplanes, storage systems, communications platforms, PCIe expansion systems, and peer-to-peer computing architectures. According to Broadcom document 12351859, its multi-host, 80-lane, 20-port design supports fan-out, aggregation, and non-blocking interconnection. Select it when concurrent high-bandwidth PCIe paths and topology flexibility are central system requirements.
What is the difference between the PEX8780 and a PCIe endpoint?
The PEX8780 is a PCIe switch that routes traffic among multiple hosts and endpoints, whereas a PCIe endpoint directly implements a device function such as storage, networking, or acceleration. Its 80 lanes and 20 ports provide switching resources, while an endpoint generally consumes a smaller subset of lanes for a specific workload. The PEX8780 therefore belongs in backplanes, aggregation, and multi-host fabrics.
What is the best drop-in replacement for the PEX8780-AB80BI?
No independently verified drop-in replacement is established for the PEX8780-AB80BI. A genuine replacement must match the exact package, ball map, lane assignments, power architecture, clocking, firmware behavior, and operating features. Other 676-ball PCIe switches can have different lane counts and pin functions, so a similar FCBGA package alone does not establish pin-to-pin compatibility.
Can PEX8748-CA80BCG replace PEX8780-AB80BI?
The PEX8748-CA80BCG should not be treated as a confirmed drop-in replacement for the PEX8780-AB80BI. Although both are Broadcom PCIe switches in the same broad family, the PEX8748 has 48 lanes while the PEX8780 has 80 lanes, representing a 40% reduction. The exact ball map, port configuration, firmware, and power requirements must also be validated before any replacement is considered.
Can PEX8734-AB80BIG replace PEX8780-AB80BI?
The PEX8734-AB80BIG is not a confirmed drop-in replacement for the PEX8780-AB80BI. It provides 32 lanes compared with 80 lanes on the PEX8780, a 60% reduction in lane count. It uses an FCBGA-676 package, but matching package dimensions and ball count do not by themselves guarantee lane-compatible placement, signaling, clocking, or power connectivity.
When should I choose the PEX8780-AB80BI over a smaller PCIe switch?
Choose the PEX8780-AB80BI when the design requires an 80-lane, 20-port Gen 3 switching fabric with multi-host operation. A smaller switch may be preferable when the board needs fewer endpoints, lower lane count, or a simpler routing topology. The PEX8780 adds implementation complexity through its scale, so the required bandwidth and port count should justify that cost.
Is the PEX8780-AB80BI suitable for storage systems?
Yes, the PEX8780-AB80BI is suitable for storage systems that need multi-host PCIe connectivity and non-blocking aggregation. Broadcom identifies servers, storage systems, and communications platforms as target applications, while the 80-lane, 20-port configuration supports complex endpoint arrangements. Final suitability depends on lane balancing, topology, firmware support, and endpoint performance requirements.
What power and thermal considerations apply to the PEX8780-AB80BI?
The PEX8780-AB80BI requires a multi-rail power design, careful decoupling, and a thermal strategy appropriate for its high-speed switching performance. Follow Broadcom's recommended power-up sequence, voltage limits, capacitor placement, and layer-stack guidance in document 12351859. Validate junction temperature under worst-case traffic and ambient conditions rather than relying only on average power.
Does the PEX8780-AB80BI support peer-to-peer PCIe connections?
Yes, Broadcom document 12351859 identifies peer-to-peer operation as one of the PEX8780's supported application topologies. This allows PCIe devices to communicate through the switching fabric rather than routing all traffic through a single host hierarchy. Successful implementation still requires correct routing configuration, endpoint support, reference clocks, and platform-specific firmware.
Is PEX8780-AB80BI in stock, and what is its lead time?
Current stock and lead time must be confirmed through the Request a Quote form on this page. The PEX8780-AB80BI is a specialized enterprise PCIe switch, so quantity, date code, package condition, and supply-chain status can affect availability. Submit the required quantity and target schedule with the quote request for a current commitment.
What price is the PEX8780-AB80BI?
Use the Request a Quote form on this page to request the current PEX8780-AB80BI price and volume schedule. Specialized PCIe switch pricing can vary with order quantity, date code, warranty, and delivery terms. A written quotation provides the most reliable commercial response for production planning and sourcing approval.

エンジニアリング参考データ: PEX8780-AB80BI — 比較、設計ガイダンス、コンプライアンス情報。

選定ガイド

Choose the PEX8780-AB80BI when a platform needs an 80-lane, 20-port PCIe Gen 3 fabric with multi-host routing, fan-out, aggregation, or peer-to-peer operation. Its capacity is appropriate for server backplanes, storage systems, communications platforms, and expansion chassis that cannot be served economically by a smaller PCIe switch. PEX8780-AB80BI-G is the closest same-family ordering option when that exact suffix is required by procurement, although final ordering-code and board compatibility should be confirmed. PEX8764-AB80BI may be considered when 64 lanes are sufficient and a lower-capacity family device is acceptable. The PEX8748-CA80BCG and PEX8734-AB80BIG should not be treated as drop-in alternatives: their documented lane counts are lower, and identical package dimensions would not resolve lane, clock, power, firmware, or routing differences. For any substitution, validate the complete ball map and PCIe training behavior rather than relying on package dimensions alone.

代替品との比較

パラメータ この製品 PEX8780-AB80BI-G PEX8764-AB80BI
Brand Broadcom Broadcom Broadcom
Package FCBGA-676 FCBGA-676 FCBGA-676
Total Lane Count 80 lanes 80 lanes 64 lanes
PCI Express Generation Gen 3 Gen 3 Gen 3
Maximum Per-Lane Rate 8.0 GT/s 8.0 GT/s 8.0 GT/s

主な差別化要因

  • Higher switching capacity than the PEX8764 option (vs PEX8764-AB80BI)
  • More PCIe ports for endpoint fan-out (vs PEX8764-AB80BI)
  • Explicit multi-host and non-blocking positioning (vs PEX8748-CA80BCG)

設計ノート

Treat the PCIe links as a complete channel from the PEX8780 package through PCB traces, connectors, and any retimers. Use the Broadcom-referenced layer stack, transmission-line geometry, via transitions, and reference-plane continuity as the starting point. Validate insertion loss, return loss, differential crosstalk, jitter, and eye width at the intended PCIe Gen 3 signaling rate.

Implement the manufacturer-recommended multi-rail power network with local high-frequency decoupling placed directly at each supply and ground ball group. Preserve the specified voltage tolerances and power-up sequencing, and separate sensitive reference-clock and I/O supply paths from noisy sources where the reference design recommends it. Confirm steady-state and transient current under worst-case traffic before finalizing power components.

Evaluate junction temperature using the device power, package thermal characteristics, PCB copper area, airflow, and the maximum ambient condition. A high-bandwidth switch can consume more power while operating under sustained traffic than during light loading, so thermal calculations should use worst-case utilization rather than idle power. Follow the Broadcom layout guidance for exposed-pad connections and thermal-via placement.

Do not treat a switch with the same ball count as a drop-in replacement without checking the lane matrix, auxiliary signals, reference clocks, power balls, and configuration interfaces. The PEX8748-CA80BCG has 48 lanes rather than 80, and the PEX8734-AB80BIG has 32 lanes rather than 80; either choice can require a different board configuration even before software and firmware differences are considered.

コンプライアンス情報

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
鉛フリー
Unknown
ハロゲンフリー
Unknown
紛争鉱物
Unknown

No target-part compliance declarations were stated. Qualification markings and package terminal-finish details must be confirmed from the exact ordering code and manufacturer documentation before production release.

データ検証日: 2026-11-11 — データはXAIPARTの部品エンジニアリングチームによって検証・管理されています

関連検索

PEX8780-AB80BI datasheet PEX8780-AB80BI pinout PEX8780-AB80BI datasheet pdf PEX8780-AB80BI specifications Broadcom PEX8780-AB80BI PEX8780-AB80BI equivalent PEX8780-AB80BI replacement PEX8780-AB80BI cross reference PEX8780-AB80BI vs PEX8764-AB80BI PEX8780-AB80BI 80 lane switch PEX8780-AB80BI server backplane PEX8780-AB80BI price PEX8780-AB80BI stock

関連部品&用語

Broadcom PEX8780-AB80BI PEX8780-AB80BI-G PEX8764-AB80BI PEX8748-CA80BCG PEX8734-AB80BIG ExpressLane PCI Express switch PCIe Gen 3 multi-root switch interface IC semiconductor 80 PCIe lanes 20 PCIe ports 8.0 GT/s non-blocking switching fabric fan-out topology aggregation topology peer-to-peer topology FCBGA-676 signal integrity reference clock server backplane storage system communications platform
クイック見積RFQ
詳細をすべてご記入ください — 営業チームが24時間以内にご返信いたします
部品番号 メーカー パッケージ QTY 目標価格 小計
✓
見積を送信しました!

24時間以内にメールでご返信いたします

1
RFQ送信済み
2
見積受領
3
注文済み
4
お支払い
5
発送済み
6
配達済み
RFQの詳細を表示