Microchip Technology

PIC16F527-E/GZ 8-Bit Flash MCU with Analog | Microchip

MPN: PIC16F527-E/GZ ✓ সক্রিয়
20-pin UQFN, 4 x 4 x 0.5 mm Package 20 MHz Speed 1.5 KB Flash Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PIC16F527-E/GZ সারাংশ

The Microchip Technology PIC16F527-E/GZ is an 8-bit PIC microcontroller with 1.5 KB of Flash program memory, 64 bytes of data memory, a 20 MHz operating frequency, integrated analog conversion, dual operational amplifiers, and two comparators. The device is packaged in a 20-pin UQFN measuring 4 x 4 x 0.5 mm. Its extended-temperature ordering code supports industrial and automotive-temperature applications where reliable operation across an elevated ambient range is required.

A PIC microcontroller is an embedded processing component that combines a processor core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The PIC16F527 belongs to the PIC16 family of 8-bit RISC microcontrollers and provides a compact platform for control systems requiring deterministic instruction execution, flexible I/O, and integrated measurement or signal-conditioning functions. This device places general-purpose control and analog functions within one compact package.

The PIC16F527-E/GZ provides 1.5 KB of Flash memory, 64 bytes of RAM, and operation up to 20 MHz. Its integrated analog resources include an ADC, two operational amplifiers, and two comparators. These peripherals reduce the component count in sensor, threshold-detection, and closed-loop control designs. The 20-pin no-lead package also supports compact PCB layouts, although its exposed thermal pad requires careful land-pattern and assembly planning.

The architecture combines a general-purpose 8-bit PIC core with integrated analog peripherals, enabling software-driven control without requiring separate amplifiers and comparators in suitable low-frequency or low-power designs. Because the ADC, amplifiers, and comparators share the device, their reference voltage, supply voltage, input limits, output behavior, and multiplexing arrangement must be evaluated together according to the manufacturer datasheet. Peripheral selection should also account for the number and electrical characteristics of the available I/O pins.

Typical uses include industrial sensor acquisition, motor and actuator control, embedded measurement instruments, temperature or level monitoring, compact control panels, and low-cost consumer equipment. The integrated analog block is particularly useful when the design must measure a sensor signal, compare it with a threshold, and perform a control action without relying on several external analog ICs.

PCB implementation should follow the manufacturer package drawing for the 20-pin UQFN land pattern, including the exposed pad. Confirm pin multiplexing in the device pin-description table before assigning external functions. Decoupling capacitors should be placed close to the supply and ground pins, while exposed-pad vias should follow the package recommendations for mechanical stability and heat spreading.

This page combines the manufacturer product information with a practical application, package, and sourcing guide. It highlights the PIC16F527-E/GZ's integrated analog resources, documents the 20 MHz and 1.5 KB Flash constraints, and provides a strict drop-in alternative review based on package and electrical compatibility rather than treating every similarly named PIC device as interchangeable.

এর জন্য ড্রপ-ইন বিকল্প PIC16F527-E/GZ — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PIC16F527-E/GZ (একই form factor এবং footprint) — পার্থক্য রয়েছে ADC, Operating Temperature, Package, Operational Amplifiers, RoHS Status.

Microchip Technology
ADC: 8-bit, 8 channels
Operating Temperature: -40 C to +125 C (Extended -E grade)
Package: 20-pin UQFN (3x3 mm) with exposed pad
Microchip Technology
ADC: 8-bit on-chip
Operating Temperature: -40C to +85C (industrial)
Package: 20-pin UQFN with exposed pad (GZ)

PIC16F527-I/GZ

✅ ড্রপ-ইন
Microchip Technology
📦 20-pin UQFN (GZ), 4 x 4 mm
8-bit PIC RISC · 1.5 KB (1024 x 12 words) · 64 bytes · Not specified in provided snippets · 20 MHz instruction rate (5 MIPS) · 2.0 V to 5.5 V · 14 GPIO · 8-bit on-chip

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PIC16F527-E/GZ সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Microcontroller Type 8-bit PIC16 RISC microcontroller
Maximum CPU Frequency 20 MHz
Program Memory 1.5 KB Flash
Program Memory Organization 1K x 12 words
Data Memory 64 bytes
অপারেটিং তাপমাত্রা -40 °C to +125 °C
ADC Integrated onboard ADC
Operational Amplifiers 2 integrated operational amplifiers
Comparators 2 integrated comparators
প্যাকেজ 20-pin UQFN, 4 x 4 x 0.5 mm
Package Code GZ
Terminal Count 20 terminals
মাউন্টিং স্টাইল No-lead surface mount
Package Shape Square
Temperature Grade Extended temperature
RoHS স্ট্যাটাস RoHS

PIC16F527-E/GZ square পিন কনফিগারেশন গাইড

PIC16F527-E/GZ (square প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

PIC16F527-E/GZ-এর জন্য square প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PIC16F527-E/GZ.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PIC16F527-E/GZ এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Acquisition, Temperature and Level Monitoring, Motor and Actuator Control, Embedded Measurement Instruments, Compact Automotive Electronics, IoT Sensor Nodes.

🏭

Industrial Sensor Acquisition

PIC16F527-E/GZ fits compact industrial sensor modules because it combines a 20 MHz 8-bit processor, onboard ADC, two operational amplifiers, and two comparators in one 20-pin UQFN. A single device can acquire a sensor signal, condition it, compare it against a reference or threshold, and control an output. This integration reduces board area and component count compared with a microcontroller and separate analog front end. The -40 °C to +125 °C specification supports harsh ambient environments, while the 1.5 KB Flash capacity is sufficient for compact control code, configuration, calibration, and communication routines. Confirm ADC resolution, input multiplexing, analog limits, and comparator behavior in the manufacturer datasheet.

🌡️

Temperature and Level Monitoring

PIC16F527-E/GZ can serve as the controller in a temperature, tank-level, or process-threshold monitor by sampling an analog sensor and evaluating the result against programmed limits. Its ADC, dual operational amplifiers, and two comparators support a compact analog signal path, while the 20 MHz CPU provides ample responsiveness for display updates, alarms, debouncing, and data logging. The 64-byte RAM is appropriate for compact working sets, while 1.5 KB of Flash constrains feature size but supports focused embedded control. Its extended -40 °C to +125 °C range helps when equipment operates in factories, vehicles, or unheated enclosures.

⚡

Motor and Actuator Control

PIC16F527-E/GZ is appropriate for small motor, valve, relay, or actuator controllers where deterministic 8-bit control and integrated analog sensing are valuable. The 20 MHz maximum operating frequency supports responsive state-machine control, while the onboard ADC can monitor current, position, potentiometer movement, or supply-related feedback. The comparators can assist with fast threshold decisions, and the operational amplifiers may support suitable low-level signal conditioning. The 20-pin UQFN keeps the controller compact, but designers should verify pin multiplexing, PWM-related functions, current limits, and thermal performance against the exact device documentation.

🔧

Embedded Measurement Instruments

PIC16F527-E/GZ supports compact measurement instruments that combine acquisition, comparison, and local control without a separate analog IC. The ADC handles sampled measurements, the dual operational amplifiers can assist with conditioning within their specified input and output ranges, and the two comparators can implement threshold or window detection. At up to 20 MHz, the 8-bit processor can control calibration, keypad input, status indication, and simple data transfer. The 1.5 KB Flash limit favors focused firmware, so demanding user interfaces or extensive data logging may require a larger-memory MCU. The UQFN package also demands careful exposed-pad layout and assembly control.

🚗

Compact Automotive Electronics

PIC16F527-E/GZ is suited to selected automotive-electronics control blocks where a small 8-bit MCU with integrated analog resources and extended temperature operation is useful. Potential roles include sensor interfaces, switch logic, actuator drivers, and supervisory circuits, provided the complete device, package, and qualification requirements satisfy the vehicle program. The -40 °C to +125 °C range supports demanding ambient conditions, while the ADC, comparators, and amplifiers reduce the footprint of basic measurement channels. Automotive deployment still requires program-specific qualification, EMC validation, transient protection, and confirmation that the exact ordering code is approved for the intended use.

🧩

IoT Sensor Nodes

PIC16F527-E/GZ can form the sensing and control core of a compact IoT node that measures an analog condition, applies thresholds, and controls local outputs before communicating status upstream. Its 1.5 KB Flash and 64-byte RAM support focused sensor logic rather than protocol-heavy firmware, while the ADC and comparators reduce the need for external analog components. The 20-pin UQFN is valuable in small enclosures and the extended-temperature range supports industrial installations. If a radio or high-volume protocol stack is required, verify program-memory and RAM consumption carefully, or select a larger-memory MCU while retaining the same board-level sensor architecture.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

PIC16F527-E/GZ Microchip Technology ব্যবহৃত হয়: Industrial Sensor Acquisition, Temperature and Level Monitoring, Motor and Actuator Control, Embedded Measurement Instruments, Compact Automotive Electronics, IoT Sensor Nodes PIC16F527 Base device family for detailed configuration ব্যবহৃত হয়: Industrial Sensor Acquisition, Temperature and Level Monitoring, Motor and Actuator Control, Embedded Measurement Instruments, Compact Automotive Electronics, IoT Sensor Nodes
What are the key specifications of PIC16F527-E/GZ that engineers should know?
The PIC16F527-E/GZ is an 8-bit Microchip Technology microcontroller operating up to 20 MHz, with 1.5 KB of Flash program memory, 64 bytes of data memory, an ADC, two operational amplifiers, and two comparators. According to the Microchip PIC16F527 product information, the device is offered in a compact 20-pin UQFN package measuring 4 x 4 x 0.5 mm. Its extended-temperature range extends from -40 °C to +125 °C, making it appropriate for industrial and automotive-temperature equipment.
Where can I download the PIC16F527-E/GZ datasheet PDF?
The official PIC16F527-E/GZ technical information is available from the Microchip Technology product page at https://www.microchip.com/en-us/product/PIC16F527. Select the datasheet and device documentation for the PIC16F527 family, then identify the ordering-code information for the -E/GZ variant. The manufacturer documentation contains the authoritative pin description, electrical characteristics, ADC and analog-peripheral limits, package dimensions, programming information, and recommended application circuits.
Where can I find the PIC16F527-E/GZ pinout?
The PIC16F527-E/GZ pinout is documented in the pin-description table in the Microchip PIC16F527 family datasheet. The GZ suffix identifies the 20-pin UQFN package, whose package code is also shown as HVQCCN in distributor records. Use the manufacturer pin table to confirm power, ground, programming, oscillator, I/O, analog-input, comparator, and output assignments because the 20 package pins can have multiple selectable functions.
What is the operating temperature range of PIC16F527-E/GZ?
The PIC16F527-E/GZ operates from -40 °C to +125 °C. This extended-temperature capability distinguishes the ordering code from standard-temperature variants and supports applications operating across industrial and automotive environmental ranges. Temperature qualification does not replace derating analysis: final component temperature depends on supply voltage, switching activity, ambient temperature, board thermal resistance, and the package exposed-pad layout.
How much Flash memory and RAM does PIC16F527-E/GZ have?
The PIC16F527-E/GZ provides 1.5 KB of Flash program memory, organized as 1K x 12 words, and 64 bytes of data memory. The manufacturer product information and distributor technical listings identify these capacities. When estimating firmware fit, include the boot or configuration area, library code, interrupt routines, calibration tables, and application-state storage rather than reserving the entire Flash and RAM areas for main-loop code.
Can PIC16F527-E/GZ replace PIC16F527-E/SO without changing the PCB?
No, PIC16F527-E/SO should not be treated as a PCB-compatible replacement for PIC16F527-E/GZ. The -E/SO ordering code uses a 20-pin SOIC package, while PIC16F527-E/GZ uses a 20-pin 4 x 4 mm UQFN package. Although both are PIC16F527 devices with the same 20 MHz and 1.5 KB Flash headline specifications, their footprints, lead geometry, pad layout, and board assembly requirements differ.
What is the best drop-in replacement for PIC16F527-E/GZ?
PIC16F527-I/GZ is the closest same-package ordering option identified because it retains the 20-pin UQFN GZ footprint and belongs to the same PIC16F527 family. The temperature-grade ordering code differs, so engineers must verify that the -I part's specified operating range covers the application. No broader set of mechanically and electrically verified drop-in replacements is established here; similarly named devices from other PIC families should not be assumed to be pin-compatible.
Is PIC16F527-I/GZ the same as PIC16F527-E/GZ?
PIC16F527-I/GZ and PIC16F527-E/GZ use the same PIC16F527 family and GZ 20-pin UQFN package, but their ordering codes indicate different temperature grades. They are therefore candidates for PCB reuse rather than universally identical devices. Before substitution, confirm the required ambient range, electrical limits, qualification expectations, pin multiplexing, and programming configuration in the Microchip ordering information for each exact MPN.
When should I choose PIC16F527-E/GZ instead of PIC16F527-I/GZ?
Choose PIC16F527-E/GZ when the design requires operation across the extended -40 °C to +125 °C range and otherwise fits the PIC16F527-E electrical grade. Choose PIC16F527-I/GZ only after confirming that its specified temperature range adequately covers the product's worst-case ambient and enclosure temperature. Both preserve the GZ package and 20-terminal organization, simplifying mechanical reuse while the ordering-code review protects application correctness.
What can replace PIC16F527-E/GZ on the same footprint?
The verified same-footprint option is PIC16F527-I/GZ, which uses the same GZ package family and PIC16F527 device architecture. It is suitable only where its temperature grade and electrical limits satisfy the original design requirements. No additional same-package alternatives can be confirmed without a device-specific pin and electrical comparison, so changing to another PIC16 family solely from its package dimensions would create avoidable compatibility risk.
Where can I buy PIC16F527-E/GZ online?
Use the Request a Quote form on this page to request the current availability, quantity breaks, lead time, and authorized sourcing conditions for PIC16F527-E/GZ. The exact MPN is also associated with the 20-pin UQFN GZ package and a 1.5 KB Flash configuration. Quote requests should state the required quantity, tube or reel preference, target date, and any inspection or traceability requirements needed by the production process.
What is the price of PIC16F527-E/GZ?
The current commercial terms for PIC16F527-E/GZ are handled through the Request a Quote form on this page. Include the exact ordering code PIC16F527-E/GZ, required quantity, and package-delivery preference when requesting a quotation. This avoids quoting a different 20-pin package variant and ensures that stock, traceability, and lead-time answers correspond to the specified GZ configuration.
What is the lead time for PIC16F527-E/GZ?
Submit a Request a Quote for PIC16F527-E/GZ to obtain the current lead time and minimum-order quantity. Lead time can change with inventory, production scheduling, package format, and order volume, so it should be confirmed for each production cycle rather than treated as a permanent catalog attribute. Include the required tube or reel format and any date-critical shipment schedule in the request.
Is PIC16F527-E/GZ in stock?
Current stock status for PIC16F527-E/GZ should be confirmed through the Request a Quote form on this page. Because this page does not assert live inventory, a definitive in-stock response would be inappropriate without a current quotation record. State the required quantity and desired delivery date so sourcing can confirm allocation and any production or lead-time dependency.
Why is PIC16F527-E/GZ suitable for sensor and control applications?
PIC16F527-E/GZ combines an 8-bit PIC processor with an onboard ADC, dual operational amplifiers, and two comparators, allowing measurement and control functions to share one package. Its 20 MHz maximum CPU frequency supports responsive control logic, while the -40 °C to +125 °C range supports demanding environments. The exact ADC resolution, channel count, analog input limits, and peripheral routing should be confirmed in the manufacturer datasheet before signal-path design.
Can PIC16F1509-I/GZ replace PIC16F527-E/GZ as a drop-in part?
PIC16F1509-I/GZ should not be assumed to be a drop-in replacement for PIC16F527-E/GZ. Although both are listed in 20-pin GZ-related package families, they are different PIC16 families and their memories, peripherals, pin functions, and electrical characteristics are not established as identical. A valid replacement requires a complete pin-by-pin, timing, memory, analog, and package comparison; package similarity alone does not establish drop-in compatibility.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PIC16F527-E/GZ — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose PIC16F527-E/GZ for compact designs that need an 8-bit controller, operation up to 20 MHz, 1.5 KB of Flash, 64 bytes of RAM, and integrated analog resources across an extended -40 °C to +125 °C range. Its 20-pin 4 x 4 mm UQFN is especially useful where board area is constrained, although the exposed-pad layout demands disciplined assembly and thermal design. PIC16F527-I/GZ is the closest same-package option when its verified temperature and electrical limits satisfy the application. Do not substitute PIC16F527-E/SO on an existing GZ board because the SOIC footprint differs. Avoid PIC16F1509-I/GZ as an assumed drop-in part: despite related package terminology, its memory, peripherals, and pin functions are not established as identical. For applications requiring substantial protocol software, large data buffers, or extensive UI logic, a higher-memory MCU may be a better fit.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য PIC16F527-I/GZ
Package 20-pin UQFN (GZ), 4 x 4 x 0.5 mm 20-pin UQFN (GZ), 4 x 4 x 0.5 mm
Brand Microchip Technology Microchip Technology
CPU Architecture 8-bit PIC16 RISC 8-bit PIC16 RISC
Maximum CPU Frequency 20 MHz 20 MHz
Program Memory 1.5 KB Flash, 1K x 12 words 1.5 KB Flash, 1K x 12 words
Data Memory 64 bytes 64 bytes
Integrated Analog Resources ADC, dual operational amplifiers, and two comparators ADC, dual operational amplifiers, and two comparators
Terminal Count 20 terminals 20 terminals
Mounting Style No-lead surface mount No-lead surface mount

মূল পার্থক্যসমূহ

  • Integrated analog functions reduce external component count (বনামPIC16F527-I/GZ)
  • Extended-temperature operation covers harsher ambient conditions (বনামPIC16F527-I/GZ)
  • Compact 20-pin footprint supports space-constrained designs (বনামPIC16F527-E/SO)

ডিজাইন নোট

Use the manufacturer land pattern for the 20-pin UQFN GZ package and preserve the exposed thermal pad. Place the device-side decoupling capacitor at the nearest supply and ground pins, keep the connection path short, and route sensitive analog inputs away from switching nodes and high-current paths. The exposed pad must be connected to the intended ground plane using the package drawing's via pattern; avoid arbitrary via counts that could compromise assembly tolerances.

Assign analog and digital functions from the exact PIC16F527-E/GZ pin-description table before schematic capture. Multiplexed pins can change behavior with configuration fuses or peripheral-selection registers, so reserve only functions that can coexist on the chosen pins. Keep the ADC input trace short, provide a nearby quiet reference source if the design requires one, and separate analog and digital return currents in the PCB stackup to reduce conversion and comparator noise.

Validate the complete power-supply range at temperature before fixing the decoupling network and analog reference. The 1.5 KB Flash program memory and 64-byte RAM require disciplined allocation, including stack headroom for interrupts and nested calls. Avoid unverified assumptions about operational-amplifier output swing, ADC input range, comparator response, or output-drive capability; each constraint must be taken from the manufacturer electrical characteristics for the exact ordering code.

The 4 x 4 mm UQFN relies heavily on its exposed pad and board copper for heat removal. Estimate junction temperature from package thermal data, ambient temperature, power dissipation, and the actual PCB copper and via arrangement. Check the resulting temperature against both the -40 °C to +125 °C device range and the system's accuracy or lifetime targets. A schematic simulation alone cannot establish final thermal performance because enclosure airflow and neighboring components affect the result.

কমপ্লায়েন্স তথ্য

RoHS
Compliant
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The LCSC product listing identifies the exact device as RoHS. REACH, AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals status are not established for this exact ordering code.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

PIC16F527-E/GZ datasheet PIC16F527-E/GZ pinout PIC16F527-E/GZ datasheet pdf PIC16F527-E/GZ specifications PIC16F527-E/GZ replacement PIC16F527-E/GZ equivalent PIC16F527-E/GZ price PIC16F527-E/GZ stock PIC16F527-E/GZ UQFN footprint PIC16F527-E/GZ vs PIC16F527-I/GZ PIC16F527-E/GZ application circuit Microchip PIC16F527-E/GZ

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology PIC16F527-E/GZ PIC16F527-I/GZ PIC16F527-E/SO PIC16F1509-I/GZ PIC16 8-bit microcontroller RISC microcontroller Flash memory data memory analog-to-digital converter operational amplifier comparator 20-pin UQFN GZ package surface mount exposed thermal pad industrial control sensor acquisition motor control IoT sensor node embedded measurement RoHS
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন