PIC16F527-E/GZ 8-Bit Flash MCU with Analog | Microchip
MPN: PIC16F527-E/GZ ✓ פעילPIC16F527-E/GZ סקירה
A PIC microcontroller is an embedded processing component that combines a processor core, nonvolatile program memory, data memory, and peripherals on one integrated circuit. The PIC16F527 belongs to the PIC16 family of 8-bit RISC microcontrollers and provides a compact platform for control systems requiring deterministic instruction execution, flexible I/O, and integrated measurement or signal-conditioning functions. This device places general-purpose control and analog functions within one compact package.
The PIC16F527-E/GZ provides 1.5 KB of Flash memory, 64 bytes of RAM, and operation up to 20 MHz. Its integrated analog resources include an ADC, two operational amplifiers, and two comparators. These peripherals reduce the component count in sensor, threshold-detection, and closed-loop control designs. The 20-pin no-lead package also supports compact PCB layouts, although its exposed thermal pad requires careful land-pattern and assembly planning.
The architecture combines a general-purpose 8-bit PIC core with integrated analog peripherals, enabling software-driven control without requiring separate amplifiers and comparators in suitable low-frequency or low-power designs. Because the ADC, amplifiers, and comparators share the device, their reference voltage, supply voltage, input limits, output behavior, and multiplexing arrangement must be evaluated together according to the manufacturer datasheet. Peripheral selection should also account for the number and electrical characteristics of the available I/O pins.
Typical uses include industrial sensor acquisition, motor and actuator control, embedded measurement instruments, temperature or level monitoring, compact control panels, and low-cost consumer equipment. The integrated analog block is particularly useful when the design must measure a sensor signal, compare it with a threshold, and perform a control action without relying on several external analog ICs.
PCB implementation should follow the manufacturer package drawing for the 20-pin UQFN land pattern, including the exposed pad. Confirm pin multiplexing in the device pin-description table before assigning external functions. Decoupling capacitors should be placed close to the supply and ground pins, while exposed-pad vias should follow the package recommendations for mechanical stability and heat spreading.
This page combines the manufacturer product information with a practical application, package, and sourcing guide. It highlights the PIC16F527-E/GZ's integrated analog resources, documents the 20 MHz and 1.5 KB Flash constraints, and provides a strict drop-in alternative review based on package and electrical compatibility rather than treating every similarly named PIC device as interchangeable.
חלופות תחליף ישיר עבור PIC16F527-E/GZ — אותו מארז, תואם פין-לפין. חלקים במארז שונה הדורשים עיבוד מחדש של ה-PCB אינם נכללים.
וריאנטים בסדרה זו
דגמים מאותה סדרה התואמים Drop-in עם PIC16F527-E/GZ (אותו גורם צורה וטביעת רגל) — שונים ב ADC, Operating Temperature, Package, Operational Amplifiers, RoHS Status.
PIC16F527-I/GZ
✅ Drop-Inצור קשר לקבלת מחיר
הצג גיליון נתונים ←PIC16F527-E/GZ דירוגים מרביים ומאפיינים חשמליים
| Microcontroller Type | 8-bit PIC16 RISC microcontroller |
| Maximum CPU Frequency | 20 MHz |
| Program Memory | 1.5 KB Flash |
| Program Memory Organization | 1K x 12 words |
| Data Memory | 64 bytes |
| טמפרטורת פעולה | -40 °C to +125 °C |
| ADC | Integrated onboard ADC |
| Operational Amplifiers | 2 integrated operational amplifiers |
| Comparators | 2 integrated comparators |
| מארז | 20-pin UQFN, 4 x 4 x 0.5 mm |
| Package Code | GZ |
| Terminal Count | 20 terminals |
| סגנון הרכבה | No-lead surface mount |
| Package Shape | Square |
| Temperature Grade | Extended temperature |
| סטטוס RoHS | RoHS |
מדריך תצורת פינים של PIC16F527-E/GZ square
תצורת פינים עבור PIC16F527-E/GZ (מארזת square). מעגל משולב דיגיטלי זה כולל GPIO, ממשקי תקשורת (UART, SPI, I2C) ופיני מתח. יש לעיין בגיליון הנתונים של היצרן לפונקציות פינים חלופיות ולאפשרויות תצורה. חיוני לתכנון מערכות משובצות ולפריסת PCB.
אין נתוני פריסת פינים מפורטים עבור PIC16F527-E/GZ.
עיינו ב- גיליון נתונים עבור תצורת פינים מלאה.
יישומים טיפוסיים
PIC16F527-E/GZ מתאים עבור 6 יישוםs: Industrial Sensor Acquisition, Temperature and Level Monitoring, Motor and Actuator Control, Embedded Measurement Instruments, Compact Automotive Electronics, IoT Sensor Nodes.
Industrial Sensor Acquisition
PIC16F527-E/GZ fits compact industrial sensor modules because it combines a 20 MHz 8-bit processor, onboard ADC, two operational amplifiers, and two comparators in one 20-pin UQFN. A single device can acquire a sensor signal, condition it, compare it against a reference or threshold, and control an output. This integration reduces board area and component count compared with a microcontroller and separate analog front end. The -40 °C to +125 °C specification supports harsh ambient environments, while the 1.5 KB Flash capacity is sufficient for compact control code, configuration, calibration, and communication routines. Confirm ADC resolution, input multiplexing, analog limits, and comparator behavior in the manufacturer datasheet.
מומלץ
Temperature and Level Monitoring
PIC16F527-E/GZ can serve as the controller in a temperature, tank-level, or process-threshold monitor by sampling an analog sensor and evaluating the result against programmed limits. Its ADC, dual operational amplifiers, and two comparators support a compact analog signal path, while the 20 MHz CPU provides ample responsiveness for display updates, alarms, debouncing, and data logging. The 64-byte RAM is appropriate for compact working sets, while 1.5 KB of Flash constrains feature size but supports focused embedded control. Its extended -40 °C to +125 °C range helps when equipment operates in factories, vehicles, or unheated enclosures.
מומלץ
Motor and Actuator Control
PIC16F527-E/GZ is appropriate for small motor, valve, relay, or actuator controllers where deterministic 8-bit control and integrated analog sensing are valuable. The 20 MHz maximum operating frequency supports responsive state-machine control, while the onboard ADC can monitor current, position, potentiometer movement, or supply-related feedback. The comparators can assist with fast threshold decisions, and the operational amplifiers may support suitable low-level signal conditioning. The 20-pin UQFN keeps the controller compact, but designers should verify pin multiplexing, PWM-related functions, current limits, and thermal performance against the exact device documentation.
מומלץ
Embedded Measurement Instruments
PIC16F527-E/GZ supports compact measurement instruments that combine acquisition, comparison, and local control without a separate analog IC. The ADC handles sampled measurements, the dual operational amplifiers can assist with conditioning within their specified input and output ranges, and the two comparators can implement threshold or window detection. At up to 20 MHz, the 8-bit processor can control calibration, keypad input, status indication, and simple data transfer. The 1.5 KB Flash limit favors focused firmware, so demanding user interfaces or extensive data logging may require a larger-memory MCU. The UQFN package also demands careful exposed-pad layout and assembly control.
מומלץ
Compact Automotive Electronics
PIC16F527-E/GZ is suited to selected automotive-electronics control blocks where a small 8-bit MCU with integrated analog resources and extended temperature operation is useful. Potential roles include sensor interfaces, switch logic, actuator drivers, and supervisory circuits, provided the complete device, package, and qualification requirements satisfy the vehicle program. The -40 °C to +125 °C range supports demanding ambient conditions, while the ADC, comparators, and amplifiers reduce the footprint of basic measurement channels. Automotive deployment still requires program-specific qualification, EMC validation, transient protection, and confirmation that the exact ordering code is approved for the intended use.
מומלץ
IoT Sensor Nodes
PIC16F527-E/GZ can form the sensing and control core of a compact IoT node that measures an analog condition, applies thresholds, and controls local outputs before communicating status upstream. Its 1.5 KB Flash and 64-byte RAM support focused sensor logic rather than protocol-heavy firmware, while the ADC and comparators reduce the need for external analog components. The 20-pin UQFN is valuable in small enclosures and the extended-temperature range supports industrial installations. If a radio or high-volume protocol stack is required, verify program-memory and RAM consumption carefully, or select a larger-memory MCU while retaining the same board-level sensor architecture.
מומלץ
סיכום מוצרים מומלצים
נתוני עזר הנדסיים עבור PIC16F527-E/GZ — השוואה, הנחיות תכנון ומידע על תאימות.
מדריך בחירה
השוואה עם חלופות
| פרמטר | מוצר זה | PIC16F527-I/GZ |
|---|---|---|
| Package | 20-pin UQFN (GZ), 4 x 4 x 0.5 mm | 20-pin UQFN (GZ), 4 x 4 x 0.5 mm |
| Brand | Microchip Technology | Microchip Technology |
| CPU Architecture | 8-bit PIC16 RISC | 8-bit PIC16 RISC |
| Maximum CPU Frequency | 20 MHz | 20 MHz |
| Program Memory | 1.5 KB Flash, 1K x 12 words | 1.5 KB Flash, 1K x 12 words |
| Data Memory | 64 bytes | 64 bytes |
| Integrated Analog Resources | ADC, dual operational amplifiers, and two comparators | ADC, dual operational amplifiers, and two comparators |
| Terminal Count | 20 terminals | 20 terminals |
| Mounting Style | No-lead surface mount | No-lead surface mount |
מבדילים עיקריים
- Integrated analog functions reduce external component count (לעומתPIC16F527-I/GZ)
- Extended-temperature operation covers harsher ambient conditions (לעומתPIC16F527-I/GZ)
- Compact 20-pin footprint supports space-constrained designs (לעומתPIC16F527-E/SO)
הערות תכנון
Use the manufacturer land pattern for the 20-pin UQFN GZ package and preserve the exposed thermal pad. Place the device-side decoupling capacitor at the nearest supply and ground pins, keep the connection path short, and route sensitive analog inputs away from switching nodes and high-current paths. The exposed pad must be connected to the intended ground plane using the package drawing's via pattern; avoid arbitrary via counts that could compromise assembly tolerances.
Assign analog and digital functions from the exact PIC16F527-E/GZ pin-description table before schematic capture. Multiplexed pins can change behavior with configuration fuses or peripheral-selection registers, so reserve only functions that can coexist on the chosen pins. Keep the ADC input trace short, provide a nearby quiet reference source if the design requires one, and separate analog and digital return currents in the PCB stackup to reduce conversion and comparator noise.
Validate the complete power-supply range at temperature before fixing the decoupling network and analog reference. The 1.5 KB Flash program memory and 64-byte RAM require disciplined allocation, including stack headroom for interrupts and nested calls. Avoid unverified assumptions about operational-amplifier output swing, ADC input range, comparator response, or output-drive capability; each constraint must be taken from the manufacturer electrical characteristics for the exact ordering code.
The 4 x 4 mm UQFN relies heavily on its exposed pad and board copper for heat removal. Estimate junction temperature from package thermal data, ambient temperature, power dissipation, and the actual PCB copper and via arrangement. Check the resulting temperature against both the -40 °C to +125 °C device range and the system's accuracy or lifetime targets. A schematic simulation alone cannot establish final thermal performance because enclosure airflow and neighboring components affect the result.
מידע על תאימות
The LCSC product listing identifies the exact device as RoHS. REACH, AEC-Q100 qualification, lead-free status, halogen-free status, and conflict-minerals status are not established for this exact ordering code.