Microchip Technology

PIC16F570-E/SO - 8-Bit 20MHz MCU with Analog | Microchip

MPN: PIC16F570-E/SO ✓ সক্রিয়
2.5 V, 3.3 V, and 5 V Vdss 28-pin SOIC, 7.50 mm width Package 20 MHz Speed 3 KB (2K x 12 bits) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PIC16F570-E/SO সারাংশ

Microchip Technology PIC16F570-E/SO is an 8-bit PIC microcontroller with 3 KB of flash program memory, 64 bytes of RAM, a 20 MHz maximum clock, and an integrated analog block containing one ADC, two operational amplifiers, and two comparators. The device is packaged in a 28-pin SOIC and supports operation from 2.5 V, 3.3 V, and 5 V supply levels.

An MCU is a semiconductor controller that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. The PIC16F570 belongs to the PIC16 family of 8-bit RISC microcontrollers, a category used for compact embedded control, measurement, monitoring, and low-cost automation products. Its integrated analog resources allow a design to measure and condition signals without requiring separate amplifiers, comparator ICs, and an ADC.

Key features include 3 KB of flash memory organized as 2K by 12 bits, 64 bytes of RAM, 8 MHz internal oscillator capability, and a maximum 20 MHz operating frequency. The PIC16F570-E/SO also includes one on-board ADC, two operational amplifiers, and two comparators. These resources make the microcontroller suitable for systems that combine digital control with sensor conditioning, threshold detection, or analog measurement.

The PIC16F570 uses a compact 12-bit-wide RISC instruction architecture. The manufacturer describes the architecture as highly symmetrical and typically providing 2:1 code compression compared with other 8-bit microcontrollers in the same class. Because the device combines flash memory with integrated analog peripherals, firmware can be updated in the circuit while keeping the external component count and board area relatively low.

Typical applications include industrial control panels, environmental monitors, compact instrumentation, appliance controls, sensor-interface boards, and small embedded products with analog inputs. The 28-pin SOIC package is particularly useful for through-hole PCB layouts and hand-assembled prototypes where a larger fine-pitch package would be inconvenient.

When designing a board around the PIC16F570-E/SO, verify the exact pin assignments and exposed analog functions in the manufacturer's pin-description table. Pay particular attention to analog supply, reference voltage, oscillator, reset, and programming connections. Decoupling should be placed close to the supply pins, while analog signal routing should remain separate from switching-node and high-current return paths.

This product page combines the manufacturer specifications, package information, practical board-design guidance, and same-footprint migration options for engineers evaluating the PIC16F570-E/SO. It also highlights the analog resources and programming architecture that should be considered when determining whether this 8-bit microcontroller fits a new embedded design.

এর জন্য ড্রপ-ইন বিকল্প PIC16F570-E/SO — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PIC16F570-E/SO (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, ADC, Operational Amplifiers, Mounting Type, I/O Pins.

Microchip Technology
Package: 28-SPDIP (Skinny Plastic DIP)
ADC: Yes (12-bit)
Mounting Type: Through-Hole
Microchip Technology
Package: 28-SSOP (5.30 mm body, 0.65 mm pitch)
ADC: 11 channels, 8-bit resolution
Operational Amplifiers: 2 (integrated, configurable)
Microchip Technology
Package: 28-pin SOIC
Operational Amplifiers: 2
Mounting Type: Surface mount
Microchip Technology
Package: 28-pin SPDIP (Skinny Plastic DIP)
ADC: 5-channel, 8-bit
Operational Amplifiers: 2 (on-chip, software configurable)

PIC16F570-I/SO

✅ ড্রপ-ইন
Microchip Technology
📦 28-pin SOIC
8-bit Flash-programmable PIC microcontroller · 20 MHz · 3 KB (2K × 12 bits) · 132 bytes · PIC RISC · 200 ns · 8-bit · 8 channels

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PIC16F570-E/SP

✅ ড্রপ-ইন
Microchip Technology
📦 28-pin SOIC
Microchip Technology · PIC 16F · PIC16 (8-bit RISC) · 8-bit · 20 MHz · 3 KB (2K x 12) FLASH · 64 bytes · 256 bytes

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PIC16F570-I/SP

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Microchip Technology
📦 28-pin SOIC
PIC 8-bit RISC (enhanced mid-range, 14-bit instruction word) · 3 KB Flash (2K x 14 words) · 64 bytes · 20 MHz (200 ns instruction cycle) · 8 MHz · 2.5 V to 5.5 V · 24

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PIC16F570T-I/SO

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 28-pin SOIC
Same 28-pin SOIC family footprint with the same 3 KB flash configuration; the T-I/SO suffix identifies a distinct ordering or marking code.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

PIC16F570T-I/SP

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 28-pin SOIC
Same 28-pin SOIC family footprint with the same 3 KB flash configuration; the T-I/SP suffix differs in ordering or marking code and uses tube packaging.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

PIC16F570-E/SO সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

CPU Architecture 8-bit RISC
সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি 20 MHz
Internal Clock Frequency 8 MHz
Flash Program Memory 3 KB (2K x 12 bits)
RAM 64 bytes
ADC Count 1
Operational Amplifier Count 2
Comparator Count 2
Supply Voltage Options 2.5 V, 3.3 V, and 5 V
Minimum Supply Voltage 4.5 V
প্যাকেজ 28-pin SOIC, 7.50 mm width
Packaging Tube
Programming Memory Type Flash
Instruction Word Width 12 bits
PWM Channels No
Address Bus Width 0 bits
Terminal Finish Matte tin

PIC16F570-E/SO 28-pin soic, 7.50 mm width পিন কনফিগারেশন গাইড

PIC16F570-E/SO (28-pin soic, 7.50 mm width প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

PIC16F570-E/SO-এর জন্য 28-pin soic, 7.50 mm width প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PIC16F570-E/SO.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PIC16F570-E/SO এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Interface, Environmental Monitoring, Appliance Control, Compact Instrumentation, Automated Control Panel, Portable Measurement Module.

🏭

Industrial Sensor Interface

The PIC16F570-E/SO fits compact sensor-interface modules that must measure an analog input and perform threshold or control decisions on the same board. Its integrated one ADC, two operational amplifiers, and two comparators reduce the need for separate analog packages, while 3 KB of flash provides room for calibration and communication routines. The 20 MHz maximum clock supports responsive control, and the 28-pin SOIC simplifies through-hole assembly. Designers should select amplifier and comparator gains within their electrical limits, reference the analog supply carefully, and isolate sensitive input routing from digital return currents.

🧩

Environmental Monitoring

The PIC16F570-E/SO can serve as the controller in a compact environmental monitor that samples a sensor, evaluates thresholds, and drives indicators or a communications output. Its one ADC supports analog measurement, while the two integrated comparators can perform fast threshold detection without requiring continuous software polling. The 64-byte RAM accommodates operating variables and samples, and the 3 KB flash stores the measurement and control firmware. For reliable deployment, account for sensor conditioning, analog reference stability, and the enclosure's temperature range when choosing between the E/SO and I/SO suffix options.

🏠

Appliance Control

The PIC16F570-E/SO is suitable for appliance controllers that coordinate switches, indicators, timers, and analog feedback from a compact PCB. Its 8-bit RISC core and 20 MHz maximum clock provide adequate control throughput for embedded state machines, while the integrated ADC and comparators can monitor a sensor line. The 28-pin SOIC package remains practical for larger, serviceable consumer-appliance boards. Firmware should include safe startup states for actuators, debounce and filtering for physical controls, and validation of every analog input against the electrical characteristics in the Microchip Technology PIC16F570 datasheet.

🔧

Compact Instrumentation

The PIC16F570-E/SO can form the control core of a compact instrument that combines analog measurement with local status indication or data output. The two operational amplifiers can condition sensor signals, the two comparators can establish adjustable detection limits, and the ADC can perform digital conversion. A maximum clock of 20 MHz gives firmware capacity for calibration tables, filtering, and operator-interface updates, while 3 KB of flash remains appropriate for a focused standalone product. Confirm ADC resolution, reference-voltage tolerances, and gain-bandwidth requirements before assigning the analog functions.

🖥️

Automated Control Panel

The PIC16F570-E/SO is well suited to a compact automated control panel that reads controls, evaluates analog sensor channels, and manages lamps, relays, or digital outputs. The integrated analog block reduces external circuitry, and the 20 MHz maximum clock allows responsive multitasking between input scanning and output control. Its 28-pin SOIC footprint supports boards assembled with through-hole techniques or mixed assembly lines. Engineers should include input protection, ensure output-driver current limits are respected, and use the manufacturer pin table to separate programming, oscillator, and analog functions during layout.

📱

Portable Measurement Module

The PIC16F570-E/SO can support a portable measurement module that operates from a 2.5 V, 3.3 V, or 5 V supply, depending on the complete design and operating conditions. Its 3 KB flash and 64-byte RAM make it appropriate for focused measurement tasks rather than large data buffering, while the integrated ADC, two op amps, and two comparators support a compact analog front end. The SOIC package can reduce board width compared with larger leaded packages. Battery-powered implementations should evaluate MCU clock choices and analog-reference behavior to control current consumption while maintaining measurement stability.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

PIC16F570-I/SO Microchip Technology ব্যবহৃত হয়: Industrial Sensor Interface, Environmental Monitoring, Compact Instrumentation, Portable Measurement Module PIC16F570-E/SP Microchip Technology ব্যবহৃত হয়: Industrial Sensor Interface, Appliance Control, Automated Control Panel PIC16F570T-I/SO Same-family 28-pin SOIC configuration with a distinct ordering code ব্যবহৃত হয়: Environmental Monitoring, Automated Control Panel PIC16F570-I/SP Microchip Technology ব্যবহৃত হয়: Appliance Control, Portable Measurement Module PIC16F570T-I/SP Same-family SOIC option with a distinct ordering code ব্যবহৃত হয়: Compact Instrumentation
What are the key specifications of PIC16F570-E/SO that engineers should know?
The PIC16F570-E/SO is an 8-bit RISC microcontroller with 3 KB of flash memory, 64 bytes of RAM, and a 20 MHz maximum clock in a 28-pin SOIC. Its integrated analog block contains one ADC, two operational amplifiers, and two comparators. According to the Microchip Technology PIC16F570 datasheet, the device supports 2.5 V, 3.3 V, and 5 V operation and uses a 12-bit-wide instruction architecture.
What is the PIC16F570-E/SO and what is it used for?
The PIC16F570-E/SO is a compact 8-bit PIC microcontroller intended for embedded measurement, monitoring, and control products. It combines 3 KB of flash memory, 64 bytes of RAM, one ADC, two operational amplifiers, and two comparators in a 28-pin SOIC. According to the Microchip Technology product page, these integrated analog resources let designers build cost-sensitive control systems without a separate analog signal-conditioning package.
Where can I download the PIC16F570 datasheet PDF?
The official PIC16F570 datasheet PDF is available from the Microchip Technology document link identified on this page. It provides the device architecture, electrical characteristics, memory organization, ADC and comparator information, clock details, and the 28-pin package pin description. Use that manufacturer document for the complete pin table rather than relying on distributor summaries, which may omit analog and programming functions.
Where can I find the PIC16F570-E/SO pinout?
The PIC16F570-E/SO pinout is defined in the pin-description section of the official Microchip Technology PIC16F570 datasheet. The package is a 28-pin SOIC, but its functional assignments include analog, oscillator, programming, and general-purpose I/O functions. Before assigning PCB tracks, use the manufacturer pin-description table to confirm each signal, including analog references, oscillator connections, and programming pins.
What is the maximum operating frequency of PIC16F570-E/SO?
The PIC16F570-E/SO supports a maximum operating frequency of 20 MHz and includes an 8 MHz internal clock capability. According to the Microchip Technology PIC16F570 datasheet, the clock choice affects both execution speed and power-consumption strategy. Designers should follow the recommended oscillator configuration and capacitor values for the selected clock source rather than assuming external-clock timing.
What memory resources does the PIC16F570-E/SO provide?
The PIC16F570-E/SO provides 3 KB of flash program memory, organized as 2K by 12 bits, together with 64 bytes of RAM. Flash memory supports in-circuit reprogramming, which is useful for product updates and configuration changes. The 64-byte RAM supports temporary variables and control state, so larger buffers should be evaluated against the application rather than assumed available.
What analog peripherals are integrated into PIC16F570-E/SO?
The PIC16F570-E/SO integrates one ADC, two operational amplifiers, and two comparators. According to the Microchip Technology product page, these peripherals provide analog measurement and signal-conditioning capability within a low-cost 8-bit MCU. The two comparators can support threshold decisions, while the operational amplifiers can condition sensor signals; exact channel counts and operating limits should be confirmed in the datasheet.
Where can I buy PIC16F570-E/SO online and what is the current price?
Use the Request a Quote form on this page to request the current unit price, quantity pricing, stock position, and lead time for PIC16F570-E/SO. Quote-first purchasing keeps commercial information aligned with current market availability and avoids publishing a stale price. Confirm the full suffix, 28-pin SOIC package, and required delivery quantity when submitting the request.
Is PIC16F570-E/SO in stock and what is its lead time?
Request current inventory and lead time for PIC16F570-E/SO through the Request a Quote form on this page. The form lets procurement confirm the exact quantity, tube packaging requirement, and production schedule. Because availability can change with component demand, include your requested date and annual usage to obtain a meaningful supply commitment.
What is the price of PIC16F570-E/SO?
The current price for PIC16F570-E/SO is best obtained through the Request a Quote form on this page. Submit the required quantity, package variant, and target delivery location to receive a current quotation. This approach is preferable to relying on an old catalog figure because market pricing, stock, and lead time for a 28-pin SOIC microcontroller can change.
PIC16F570-E/SO vs PIC16F570-I/SO - which is better for industrial use?
PIC16F570-E/SO and PIC16F570-I/SO share the 28-pin SOIC architecture and the same PIC16F570 function set, but their temperature-grade suffixes indicate different qualification ranges. The E/SO is the appropriate choice when the design requires the extended-temperature option; the I/SO is the industrial-grade option. Verify the exact operating-temperature limits and qualification requirements against the manufacturer datasheet.
What is the difference between PIC16F570-E/SO and PIC16F570-E/SP?
PIC16F570-E/SO and PIC16F570-E/SP use the same 28-pin SOIC device configuration and electrical function set, while their suffix codes identify different shipment packaging. The E/SO listing is associated with tape-and-reel ordering, while E/SP denotes the tube-packed form. Both remain suitable for the same electrical PCB footprint, but the assembly and packaging format must match procurement requirements.
When should I choose PIC16F570-E/SO over PIC16F570-I/SO?
Choose PIC16F570-E/SO when the required product temperature range calls for the extended-temperature variant rather than the industrial-grade PIC16F570-I/SO. Both provide 3 KB of flash, 64 bytes of RAM, a 20 MHz maximum clock, and integrated analog resources in 28-pin SOIC. The decision should be based on the minimum and maximum ambient temperature expected during operation, not only on the MCU's operating frequency.
Is PIC16F570-E/SO suitable for sensor and measurement applications?
The PIC16F570-E/SO is suitable for compact sensor and measurement applications because it combines one ADC, two operational amplifiers, and two comparators with an 8-bit processing core. According to the Microchip Technology PIC16F570 datasheet, the MCU provides 3 KB of flash and 64 bytes of RAM. Confirm analog input ranges, reference accuracy, and required measurement resolution before finalizing the signal chain.
What can replace PIC16F570-E/SO on the same PCB footprint?
PIC16F570-I/SO and PIC16F570-E/SP are documented same-family alternatives that retain the 28-pin SOIC footprint. PIC16F570-I/SP, PIC16F570T-I/SO, and PIC16F570T-I/SP are additional same-family suffix variants. Before substituting any part, verify the pin and code compatibility chart, operating-temperature grade, clock configuration, and production packaging; a shared package alone does not guarantee timing or qualification equivalence.
What is the best cross-brand equivalent for PIC16F570-E/SO?
No cross-brand drop-in equivalent is established for the PIC16F570-E/SO by the available compatibility information. A genuine replacement must match the 28-pin SOIC pinout, 3 KB flash capacity, 64-byte RAM, clock behavior, analog peripheral functions, and supply requirements. Cross-family parts can provide similar applications, but they require firmware, peripheral, and possibly PCB changes rather than functioning as unqualified drop-in replacements.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PIC16F570-E/SO — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the PIC16F570-E/SO for a compact 8-bit embedded design that needs 3 KB of flash, 64 bytes of RAM, a 20 MHz maximum clock, and integrated analog functions in a 28-pin SOIC. Select PIC16F570-I/SO when the industrial temperature grade is sufficient and the same electrical configuration is needed in the standard SO suffix. Use PIC16F570-E/SP when the same E-grade configuration is required in tube packaging rather than the E/SO shipment format. PIC16F570-I/SP, PIC16F570T-I/SO, and PIC16F570T-I/SP are same-family alternatives for procurement and marking-code variations. No cross-brand drop-in replacement is established, so any substitute from another family must be treated as a redesign requiring pin, timing, firmware, analog-peripheral, and qualification review.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য PIC16F570-I/SO PIC16F570-E/SP PIC16F570-I/SP PIC16F570T-I/SO PIC16F570T-I/SP
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 28-pin SOIC 28-pin SOIC - same footprint 28-pin SOIC - same footprint 28-pin SOIC - same footprint 28-pin SOIC - same footprint 28-pin SOIC - same footprint

মূল পার্থক্যসমূহ

  • Integrated analog signal-conditioning resources (বনামPIC16F57-E/SO)
  • Same 28-pin SOIC footprint with extended-temperature suffix (বনামPIC16F570-I/SO)
  • Identical electrical configuration in alternate shipment format (বনামPIC16F570-E/SP)

ডিজাইন নোট

Assign all 28 connections from the Microchip Technology pin-description table before routing the PCB. Preserve clear access to programming and reset functions, and keep the analog reference and analog-supply pins free from high-current switching paths. Place the required supply bypass capacitors close to their corresponding pins and provide a low-impedance ground path for the analog and digital sections.

Route analog inputs away from oscillator, programming, and switching signals. If the two comparators are used for threshold detection, keep their input traces short and decouple sensitive nodes where the application permits it. Treat the two integrated operational amplifiers as precision analog functions: verify input common-mode range, output swing, stability, and load drive against the manufacturer electrical characteristics before finalizing the sensor interface.

Do not treat a shared 28-pin SOIC footprint as proof of unconditional interchangeability. Check the PIC16 pin-and-code compatibility chart, confirm the required E or I temperature grade, verify oscillator and programming behavior, and confirm whether the alternate suffix is supplied by tube or tape and reel. These checks are especially important when existing firmware depends on configuration bits or analog peripheral assignments.

The device supports multiple supply-voltage options, but the complete system must use one rail configuration consistently for the MCU and its analog peripherals. Check the minimum operating voltage, ADC and comparator reference requirements, I/O input thresholds, and output-current limits in the manufacturer datasheet. Avoid allowing an external signal to exceed the MCU's specified input range when the board can be exposed to field wiring or unusual power-up conditions.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance status and qualification claims should be confirmed using the current Microchip Technology product documentation or declarations for the exact orderable suffix.

ডেটা যাচাই করা হয়েছে: 2026-11-19 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

pic16f570 datasheet PIC16F570-E/SO datasheet PIC16F570 datasheet pdf PIC16F570-E/SO pinout PIC16F570-E/SO specifications PIC16F570-E/SO 28-pin SOIC PIC16F570 3KB flash 64 byte RAM PIC16F570 20MHz ADC comparators PIC16F570-E/SO vs PIC16F570-I/SO PIC16F570-E/SO replacement PIC16F570-E/SO cross reference PIC16F570-E/SO price PIC16F570-E/SO stock Microchip PIC16F570-E/SO PIC16F570 sensor measurement application

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology PIC16F570-E/SO PIC16F570-I/SO PIC16F570-E/SP PIC16F570-I/SP PIC16F570T-I/SO PIC16F570T-I/SP PIC16F57-E/SO PIC16 MCU microcontroller 8-bit RISC flash program memory RAM ADC operational amplifier comparator 20 MHz 8 MHz internal oscillator 28-pin SOIC SOIC package family surface mount SMD sensor interface industrial control
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন