PIC16F570-E/SO - 8-Bit 20MHz MCU with Analog | Microchip
MPN: PIC16F570-E/SO ✓ AktifPIC16F570-E/SO Ringkasan
An MCU is a semiconductor controller that combines a processor core, program memory, data memory, and peripherals on one integrated circuit. The PIC16F570 belongs to the PIC16 family of 8-bit RISC microcontrollers, a category used for compact embedded control, measurement, monitoring, and low-cost automation products. Its integrated analog resources allow a design to measure and condition signals without requiring separate amplifiers, comparator ICs, and an ADC.
Key features include 3 KB of flash memory organized as 2K by 12 bits, 64 bytes of RAM, 8 MHz internal oscillator capability, and a maximum 20 MHz operating frequency. The PIC16F570-E/SO also includes one on-board ADC, two operational amplifiers, and two comparators. These resources make the microcontroller suitable for systems that combine digital control with sensor conditioning, threshold detection, or analog measurement.
The PIC16F570 uses a compact 12-bit-wide RISC instruction architecture. The manufacturer describes the architecture as highly symmetrical and typically providing 2:1 code compression compared with other 8-bit microcontrollers in the same class. Because the device combines flash memory with integrated analog peripherals, firmware can be updated in the circuit while keeping the external component count and board area relatively low.
Typical applications include industrial control panels, environmental monitors, compact instrumentation, appliance controls, sensor-interface boards, and small embedded products with analog inputs. The 28-pin SOIC package is particularly useful for through-hole PCB layouts and hand-assembled prototypes where a larger fine-pitch package would be inconvenient.
When designing a board around the PIC16F570-E/SO, verify the exact pin assignments and exposed analog functions in the manufacturer's pin-description table. Pay particular attention to analog supply, reference voltage, oscillator, reset, and programming connections. Decoupling should be placed close to the supply pins, while analog signal routing should remain separate from switching-node and high-current return paths.
This product page combines the manufacturer specifications, package information, practical board-design guidance, and same-footprint migration options for engineers evaluating the PIC16F570-E/SO. It also highlights the analog resources and programming architecture that should be considered when determining whether this 8-bit microcontroller fits a new embedded design.
Alternatif penggantian untuk PIC16F570-E/SO — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.
Variasi di dalam seri ini
Model-series yang sama yang kompatibel dengan penggantian PIC16F570-E/SO (sama faktor bentuk dan footprint) — berbeda di dalam Package, ADC, Operational Amplifiers, Mounting Type, I/O Pins.
PIC16F570-I/SO
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F570-E/SP
✅ Drop-InKontak untuk harga
Lihat Datasheet →PIC16F570-I/SP
✅ Drop-In ⚠️ Spesifikasi Tidak DisahkanKontak untuk harga
Lihat Datasheet →PIC16F570T-I/SO
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC16F570T-I/SP
✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan📋 Alternatif referensi (tidak dalam katalog)
PIC16F570-E/SO Rating Maksimal & Karakteristik Listrik
| CPU Architecture | 8-bit RISC |
| Frekuensi Bawah Maximum | 20 MHz |
| Internal Clock Frequency | 8 MHz |
| Flash Program Memory | 3 KB (2K x 12 bits) |
| RAM | 64 bytes |
| ADC Count | 1 |
| Operational Amplifier Count | 2 |
| Comparator Count | 2 |
| Supply Voltage Options | 2.5 V, 3.3 V, and 5 V |
| Minimum Supply Voltage | 4.5 V |
| Paket | 28-pin SOIC, 7.50 mm width |
| Packaging | Tube |
| Programming Memory Type | Flash |
| Instruction Word Width | 12 bits |
| PWM Channels | No |
| Address Bus Width | 0 bits |
| Terminal Finish | Matte tin |
PIC16F570-E/SO 28-pin soic, 7.50 mm width Diamant Konfigurasi Panduan
Konfigurasi pin untuk PIC16F570-E/SO (28-pin soic, 7.50 mm width pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.
Tidak ada data diatribut pin yang tersedia untuk PIC16F570-E/SO.
Lihat ke: datasheet produk untuk konfigurasi pin penuh.
Aplikasi Umum
PIC16F570-E/SO cocok untuk 6 aplikasis: Industrial Sensor Interface, Environmental Monitoring, Appliance Control, Compact Instrumentation, Automated Control Panel, Portable Measurement Module.
Industrial Sensor Interface
The PIC16F570-E/SO fits compact sensor-interface modules that must measure an analog input and perform threshold or control decisions on the same board. Its integrated one ADC, two operational amplifiers, and two comparators reduce the need for separate analog packages, while 3 KB of flash provides room for calibration and communication routines. The 20 MHz maximum clock supports responsive control, and the 28-pin SOIC simplifies through-hole assembly. Designers should select amplifier and comparator gains within their electrical limits, reference the analog supply carefully, and isolate sensitive input routing from digital return currents.
Direkomendasikan
Environmental Monitoring
The PIC16F570-E/SO can serve as the controller in a compact environmental monitor that samples a sensor, evaluates thresholds, and drives indicators or a communications output. Its one ADC supports analog measurement, while the two integrated comparators can perform fast threshold detection without requiring continuous software polling. The 64-byte RAM accommodates operating variables and samples, and the 3 KB flash stores the measurement and control firmware. For reliable deployment, account for sensor conditioning, analog reference stability, and the enclosure's temperature range when choosing between the E/SO and I/SO suffix options.
Direkomendasikan
Appliance Control
The PIC16F570-E/SO is suitable for appliance controllers that coordinate switches, indicators, timers, and analog feedback from a compact PCB. Its 8-bit RISC core and 20 MHz maximum clock provide adequate control throughput for embedded state machines, while the integrated ADC and comparators can monitor a sensor line. The 28-pin SOIC package remains practical for larger, serviceable consumer-appliance boards. Firmware should include safe startup states for actuators, debounce and filtering for physical controls, and validation of every analog input against the electrical characteristics in the Microchip Technology PIC16F570 datasheet.
Direkomendasikan
Compact Instrumentation
The PIC16F570-E/SO can form the control core of a compact instrument that combines analog measurement with local status indication or data output. The two operational amplifiers can condition sensor signals, the two comparators can establish adjustable detection limits, and the ADC can perform digital conversion. A maximum clock of 20 MHz gives firmware capacity for calibration tables, filtering, and operator-interface updates, while 3 KB of flash remains appropriate for a focused standalone product. Confirm ADC resolution, reference-voltage tolerances, and gain-bandwidth requirements before assigning the analog functions.
Direkomendasikan
Automated Control Panel
The PIC16F570-E/SO is well suited to a compact automated control panel that reads controls, evaluates analog sensor channels, and manages lamps, relays, or digital outputs. The integrated analog block reduces external circuitry, and the 20 MHz maximum clock allows responsive multitasking between input scanning and output control. Its 28-pin SOIC footprint supports boards assembled with through-hole techniques or mixed assembly lines. Engineers should include input protection, ensure output-driver current limits are respected, and use the manufacturer pin table to separate programming, oscillator, and analog functions during layout.
Direkomendasikan
Portable Measurement Module
The PIC16F570-E/SO can support a portable measurement module that operates from a 2.5 V, 3.3 V, or 5 V supply, depending on the complete design and operating conditions. Its 3 KB flash and 64-byte RAM make it appropriate for focused measurement tasks rather than large data buffering, while the integrated ADC, two op amps, and two comparators support a compact analog front end. The SOIC package can reduce board width compared with larger leaded packages. Battery-powered implementations should evaluate MCU clock choices and analog-reference behavior to control current consumption while maintaining measurement stability.
Direkomendasikan
Ringkasan Produk Direkomendasikan
Data referensi engineering untuk PIC16F570-E/SO — pembandingan, panduan desain, dan informasi konformitas.
Panduan Pemilihan
Pembandingan dengan Alternatif
| Parameter Umum | Produk Ini | PIC16F570-I/SO | PIC16F570-E/SP | PIC16F570-I/SP | PIC16F570T-I/SO | PIC16F570T-I/SP |
|---|---|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 28-pin SOIC | 28-pin SOIC - same footprint | 28-pin SOIC - same footprint | 28-pin SOIC - same footprint | 28-pin SOIC - same footprint | 28-pin SOIC - same footprint |
Diferensiator Kunci
- Integrated analog signal-conditioning resources (vsPIC16F57-E/SO)
- Same 28-pin SOIC footprint with extended-temperature suffix (vsPIC16F570-I/SO)
- Identical electrical configuration in alternate shipment format (vsPIC16F570-E/SP)
Catatan Desain
Assign all 28 connections from the Microchip Technology pin-description table before routing the PCB. Preserve clear access to programming and reset functions, and keep the analog reference and analog-supply pins free from high-current switching paths. Place the required supply bypass capacitors close to their corresponding pins and provide a low-impedance ground path for the analog and digital sections.
Route analog inputs away from oscillator, programming, and switching signals. If the two comparators are used for threshold detection, keep their input traces short and decouple sensitive nodes where the application permits it. Treat the two integrated operational amplifiers as precision analog functions: verify input common-mode range, output swing, stability, and load drive against the manufacturer electrical characteristics before finalizing the sensor interface.
Do not treat a shared 28-pin SOIC footprint as proof of unconditional interchangeability. Check the PIC16 pin-and-code compatibility chart, confirm the required E or I temperature grade, verify oscillator and programming behavior, and confirm whether the alternate suffix is supplied by tube or tape and reel. These checks are especially important when existing firmware depends on configuration bits or analog peripheral assignments.
The device supports multiple supply-voltage options, but the complete system must use one rail configuration consistently for the MCU and its analog peripherals. Check the minimum operating voltage, ADC and comparator reference requirements, I/O input thresholds, and output-current limits in the manufacturer datasheet. Avoid allowing an external signal to exceed the MCU's specified input range when the board can be exposed to field wiring or unusual power-up conditions.
Informasi Konformitas
Compliance status and qualification claims should be confirmed using the current Microchip Technology product documentation or declarations for the exact orderable suffix.