PIC16F871-E/PT - 20MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F871-E/PT ✓ সক্রিয়PIC16F871-E/PT সারাংশ
A microcontroller is a programmable semiconductor that combines a processor core, memory, and dedicated peripherals on one integrated circuit. The PIC16F871 belongs to the PIC16 family of 8-bit RISC microcontrollers and sits within the broader embedded-controller and semiconductor hierarchy. Its combination of flash program memory, EEPROM data memory, self-programming, and conventional peripherals supports compact control systems that require readable firmware development and deterministic real-time behavior.
Key device features include 3.5 KB of flash program memory organized as 2K by 14 words, 64 bytes of nonvolatile EEPROM, eight 10-bit analog-to-digital conversion channels, and a 20 MHz operating speed. The device also provides self-programming, in-circuit debugging support, two additional timers, capture/compare/PWM functions, and a Universal Asynchronous Receiver Transmitter. These integrated resources reduce the need for external analog, timing, communication, and data-storage components.
The PIC16F871 architecture is based on a compact 8-bit PIC16 RISC core designed for embedded control rather than host computing. Its flash memory supports in-circuit programming and firmware updates, while the EEPROM provides a separate nonvolatile area for calibration data, serial numbers, counters, or configuration records. The eight-channel 10-bit A/D converter is suitable for monitoring analog sensors, and the USART provides asynchronous serial communication for supervisory controllers, data loggers, or service interfaces.
Typical applications include industrial sensor modules, motor and valve controllers, building-control endpoints, instrumentation interfaces, appliance control boards, and compact serial data loggers. In an analog monitoring design, the eight A/D channels can reduce the number of external converter inputs, while the USART can relay readings to a supervisory system. The 20 MHz clock rate provides additional processing headroom for protocol handling and control calculations.
PCB implementation should follow the 44-pin TQFP land pattern and the manufacturer’s decoupling recommendations. Place the primary supply capacitor close to the appropriate power and ground pins, keep oscillator traces short, and provide adequate ground-plane continuity beneath the device. Confirm the exact pin assignments, programming connections, and peripheral multiplexing against the manufacturer datasheet before fabrication.
This product page combines the device’s core electrical and memory characteristics with package guidance, application fit, temperature-grade alternatives, and practical design considerations. It is intended to accelerate MCU selection, schematic review, PCB planning, and sourcing for embedded systems built around the PIC16F871 platform.
এর জন্য ড্রপ-ইন বিকল্প PIC16F871-E/PT — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible PIC16F871-E/PT (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Mounting Type, I/O Pins, Operating Temperature, Self-Programming.
PIC16F871-I/PT
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC16F871T-E/PT
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PIC16F871T-I/PT
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PIC16F871-E/PT সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 8-bit Flash Microcontroller |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 20 MHz |
| Program Memory | 3.5 KB (2K x 14 words) |
| Data EEPROM | 64 bytes |
| Analog-to-Digital Channels | 8 channels |
| ADC Resolution | 10 bits |
| Supply Voltage Range | 4 V to 5.5 V |
| I/O Port Count | 16 I/O |
| Self-Programming | Supported |
| Debug Interface | In-Circuit Debug (ICD) |
| Timer Resources | 2 additional timers |
| Capture/Compare/PWM | Supported |
| Serial Communication | Universal Asynchronous Receiver Transmitter (USART) |
| প্যাকেজ | 44-pin TQFP (10 x 10 mm) |
| মাউন্টিং টাইপ | Surface Mount |
| অপারেটিং তাপমাত্রা | -40°C to +125°C |
| Architecture | PIC16 8-bit RISC |
| RoHS স্ট্যাটাস | unknown |
PIC16F871-E/PT 44-pin tqfp (10 x 10 mm) পিন কনফিগারেশন গাইড
PIC16F871-E/PT (44-pin tqfp (10 x 10 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PIC16F871-E/PT.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PIC16F871-E/PT এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Monitoring, Motor and Valve Control, Serial Data Logger, Building Control Endpoint, Appliance Control Board, Programmable Instrumentation Interface.
Industrial Sensor Monitoring
PIC16F871-E/PT fits industrial sensor-monitoring modules that must operate from -40°C to +125°C while sampling several analog channels. Its eight 10-bit A/D converter channels reduce the need for separate analog-to-digital converter packages, and the 20 MHz clock provides capacity for filtering, calibration, and status processing. The 64-byte EEPROM can retain calibration coefficients or a device serial number. Place the MCU outside high-temperature or high-humidity enclosure regions when practical, and verify the selected sensor outputs against the 4 V to 5.5 V supply range.
সুপারিশকৃত
Motor and Valve Control
PIC16F871-E/PT is suitable for compact motor, solenoid, and valve controllers because its capture/compare/PWM resources support timed output functions while the 20 MHz processor handles sequencing and diagnostics. The 64-byte EEPROM can preserve operating counters or configuration values across power cycles. Its extended -40°C to +125°C range is useful in equipment exposed to substantial internal temperature variation. Separate the MCU supply from inductive switching transients, use appropriate driver circuitry, and confirm pin multiplexing before assigning PWM outputs.
সুপারিশকৃত
Serial Data Logger
PIC16F871-E/PT can serve as the controller in a compact serial data logger that receives sensor measurements and transmits them through its USART. Eight 10-bit A/D channels support multiple analog inputs, while 3.5 KB of flash stores the firmware and 64 bytes of EEPROM preserves limited persistent metadata. The 20 MHz operating rate allows interrupt-driven acquisition and communication. For longer deployments, use the USART protocol efficiently and verify the baud-rate tolerance and timing behavior with the chosen external clock arrangement.
সুপারিশকৃত
Building Control Endpoint
PIC16F871-E/PT is appropriate for building-control endpoints that monitor analog inputs and report status over a serial network. The integrated A/D converter can sample temperature, level, or occupancy-related sensor outputs, while the USART connects the endpoint to a controller or communications bridge. Its -40°C to +125°C grade supports operation across diverse building environments, although enclosure heating may still be necessary. Validate EMC behavior, grounding strategy, and long-cable sensor connections before field deployment.
সুপারিশকৃত
Appliance Control Board
PIC16F871-E/PT fits appliance-control boards requiring a compact 8-bit controller, flash firmware storage, EEPROM configuration retention, and mixed analog and digital control. Its eight 10-bit A/D channels can monitor sensors, while timers and capture/compare/PWM functions support motor, heating, or display-related timing. The extended-temperature grade is useful in kitchen equipment, industrial washers, and equipment exposed to elevated internal temperatures. Use the manufacturer’s oscillator and decoupling layouts to maintain reliable startup and timing performance.
সুপারিশকৃত
Programmable Instrumentation Interface
PIC16F871-E/PT can act as the embedded interface in programmable instrumentation, converting up to eight analog inputs into processed measurements and communicating results through the USART. The 20 MHz clock supports responsive sampling and command handling, while self-programming enables field firmware updates. The 64-byte EEPROM can store small configuration records, although it is not intended for large data logging. Review the ADC acquisition timing and peripheral multiplexing requirements in the manufacturer data sheet before fixing the system clock and channel assignments.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PIC16F871-E/PT — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PIC16F871-I/PT | PIC16F871T-E/PT | PIC16F871T-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-TQFP (10x10) | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same |
| Product Type | 8-bit Flash Microcontroller | 8-bit Flash Microcontroller | 8-bit Flash Microcontroller | 8-bit Flash Microcontroller |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 3.5 KB (2K x 14 words) | 3.5 KB | 3.5 KB | 3.5 KB |
| Data EEPROM | 64 bytes | 64 bytes | 64 bytes | 64 bytes |
| ADC Configuration | 8 channels, 10-bit resolution | 8 channels, 10-bit resolution | 8 channels, 10-bit resolution | 8 channels, 10-bit resolution |
| Supply Voltage Range | 4 V to 5.5 V | 4 V to 5.5 V | 4 V to 5.5 V | 4 V to 5.5 V |
| Maximum Operating Temperature | 125°C | 85°C | 125°C | 85°C |
| Self-Programming | Supported | Supported | Supported | Supported |
মূল পার্থক্যসমূহ
- Extended-temperature operation (বনামPIC16F871-I/PT)
- Integrated analog measurement without a separate ADC (বনামPIC16F871-I/PT)
- Integrated persistent data and serial communications (বনামPIC16F871T-I/PT)
ডিজাইন নোট
Route the 44-pin TQFP footprint exactly as defined by the manufacturer package drawing, paying particular attention to pin-1 orientation and lead pitch. Place the primary supply-decoupling capacitor close to the device’s supply and ground pins, provide a continuous ground plane, and keep oscillator traces short and away from high-current switching paths. Confirm every multiplexed peripheral assignment against the pin-description table before releasing the PCB artwork.
Design the supply network for the 4 V to 5.5 V operating range and check source impedance during high-current transitions. Place bulk and local bypass capacitors according to the manufacturer application guidance, and use separate return paths for noisy loads where practical. If the MCU drives relays, solenoids, or motor windings, use transistor or driver stages and prevent inductive transients from coupling directly into analog and oscillator circuitry.
Do not confuse the 44-pin PIC16F871 package with the 28-pin PIC16F870 package, and do not substitute an I-grade device when the system can exceed 85°C. Verify programming-pins, oscillator configuration, analog-channel assignments, and I/O direction settings in firmware. Also confirm that the selected ordering suffix matches the required reel or tray format before authorizing a production purchase.
Treat analog inputs as potentially noisy PCB nets even when they originate from sensors. Keep analog traces short, route them away from oscillator and switching-current paths, and use a continuous reference plane beneath the MCU. If several A/D channels are sampled concurrently, check the source impedance and acquisition-time requirements in the manufacturer data sheet; adding small series resistance near the source can help control settling behavior.
কমপ্লায়েন্স তথ্য
Compliance declarations for the exact ordered MPN were not identified in the cited product information and must be confirmed with Microchip Technology before regulated production use.