PIC16F871-E/PT - 20MHz 8-Bit Flash MCU | Microchip
MPN: PIC16F871-E/PT ✓ NakahandaPIC16F871-E/PT Ulas
A microcontroller is a programmable semiconductor that combines a processor core, memory, and dedicated peripherals on one integrated circuit. The PIC16F871 belongs to the PIC16 family of 8-bit RISC microcontrollers and sits within the broader embedded-controller and semiconductor hierarchy. Its combination of flash program memory, EEPROM data memory, self-programming, and conventional peripherals supports compact control systems that require readable firmware development and deterministic real-time behavior.
Key device features include 3.5 KB of flash program memory organized as 2K by 14 words, 64 bytes of nonvolatile EEPROM, eight 10-bit analog-to-digital conversion channels, and a 20 MHz operating speed. The device also provides self-programming, in-circuit debugging support, two additional timers, capture/compare/PWM functions, and a Universal Asynchronous Receiver Transmitter. These integrated resources reduce the need for external analog, timing, communication, and data-storage components.
The PIC16F871 architecture is based on a compact 8-bit PIC16 RISC core designed for embedded control rather than host computing. Its flash memory supports in-circuit programming and firmware updates, while the EEPROM provides a separate nonvolatile area for calibration data, serial numbers, counters, or configuration records. The eight-channel 10-bit A/D converter is suitable for monitoring analog sensors, and the USART provides asynchronous serial communication for supervisory controllers, data loggers, or service interfaces.
Typical applications include industrial sensor modules, motor and valve controllers, building-control endpoints, instrumentation interfaces, appliance control boards, and compact serial data loggers. In an analog monitoring design, the eight A/D channels can reduce the number of external converter inputs, while the USART can relay readings to a supervisory system. The 20 MHz clock rate provides additional processing headroom for protocol handling and control calculations.
PCB implementation should follow the 44-pin TQFP land pattern and the manufacturer’s decoupling recommendations. Place the primary supply capacitor close to the appropriate power and ground pins, keep oscillator traces short, and provide adequate ground-plane continuity beneath the device. Confirm the exact pin assignments, programming connections, and peripheral multiplexing against the manufacturer datasheet before fabrication.
This product page combines the device’s core electrical and memory characteristics with package guidance, application fit, temperature-grade alternatives, and practical design considerations. It is intended to accelerate MCU selection, schematic review, PCB planning, and sourcing for embedded systems built around the PIC16F871 platform.
Mga alternatibo na pwedeng ilagay na PIC16F871-E/PT — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC16F871-E/PT (parehas na form factor at footprint) — pagkakaiba sa Package, Mounting Type, I/O Pins, Operating Temperature, Self-Programming.
PIC16F871-I/PT
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC16F871T-E/PT
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC16F871T-I/PT
✅ Drop-In📋 Alternatibo na Reference (hindi sa katalogo)
PIC16F871-E/PT Mga Pinakamataas na Rating at Electrical Characteristics
| Product Type | 8-bit Flash Microcontroller |
| Maksimum na Taktiko ng Oras | 20 MHz |
| Program Memory | 3.5 KB (2K x 14 words) |
| Data EEPROM | 64 bytes |
| Analog-to-Digital Channels | 8 channels |
| ADC Resolution | 10 bits |
| Supply Voltage Range | 4 V to 5.5 V |
| I/O Port Count | 16 I/O |
| Self-Programming | Supported |
| Debug Interface | In-Circuit Debug (ICD) |
| Timer Resources | 2 additional timers |
| Capture/Compare/PWM | Supported |
| Serial Communication | Universal Asynchronous Receiver Transmitter (USART) |
| Packhaging | 44-pin TQFP (10 x 10 mm) |
| Uri ng Pagpapasok | Surface Mount |
| Temperature na Operasyon | -40°C to +125°C |
| Architecture | PIC16 8-bit RISC |
| Tindminan RoHS | unknown |
Gabay sa Pin Configuration ng PIC16F871-E/PT 44-pin tqfp (10 x 10 mm)
Pin configuration para sa PIC16F871-E/PT (44-pin tqfp (10 x 10 mm) package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC16F871-E/PT.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC16F871-E/PT ay nararapat para sa 6 aplikasyons: Industrial Sensor Monitoring, Motor and Valve Control, Serial Data Logger, Building Control Endpoint, Appliance Control Board, Programmable Instrumentation Interface.
Industrial Sensor Monitoring
PIC16F871-E/PT fits industrial sensor-monitoring modules that must operate from -40°C to +125°C while sampling several analog channels. Its eight 10-bit A/D converter channels reduce the need for separate analog-to-digital converter packages, and the 20 MHz clock provides capacity for filtering, calibration, and status processing. The 64-byte EEPROM can retain calibration coefficients or a device serial number. Place the MCU outside high-temperature or high-humidity enclosure regions when practical, and verify the selected sensor outputs against the 4 V to 5.5 V supply range.
Inirekomenda
Motor and Valve Control
PIC16F871-E/PT is suitable for compact motor, solenoid, and valve controllers because its capture/compare/PWM resources support timed output functions while the 20 MHz processor handles sequencing and diagnostics. The 64-byte EEPROM can preserve operating counters or configuration values across power cycles. Its extended -40°C to +125°C range is useful in equipment exposed to substantial internal temperature variation. Separate the MCU supply from inductive switching transients, use appropriate driver circuitry, and confirm pin multiplexing before assigning PWM outputs.
Inirekomenda
Serial Data Logger
PIC16F871-E/PT can serve as the controller in a compact serial data logger that receives sensor measurements and transmits them through its USART. Eight 10-bit A/D channels support multiple analog inputs, while 3.5 KB of flash stores the firmware and 64 bytes of EEPROM preserves limited persistent metadata. The 20 MHz operating rate allows interrupt-driven acquisition and communication. For longer deployments, use the USART protocol efficiently and verify the baud-rate tolerance and timing behavior with the chosen external clock arrangement.
Inirekomenda
Building Control Endpoint
PIC16F871-E/PT is appropriate for building-control endpoints that monitor analog inputs and report status over a serial network. The integrated A/D converter can sample temperature, level, or occupancy-related sensor outputs, while the USART connects the endpoint to a controller or communications bridge. Its -40°C to +125°C grade supports operation across diverse building environments, although enclosure heating may still be necessary. Validate EMC behavior, grounding strategy, and long-cable sensor connections before field deployment.
Inirekomenda
Appliance Control Board
PIC16F871-E/PT fits appliance-control boards requiring a compact 8-bit controller, flash firmware storage, EEPROM configuration retention, and mixed analog and digital control. Its eight 10-bit A/D channels can monitor sensors, while timers and capture/compare/PWM functions support motor, heating, or display-related timing. The extended-temperature grade is useful in kitchen equipment, industrial washers, and equipment exposed to elevated internal temperatures. Use the manufacturer’s oscillator and decoupling layouts to maintain reliable startup and timing performance.
Inirekomenda
Programmable Instrumentation Interface
PIC16F871-E/PT can act as the embedded interface in programmable instrumentation, converting up to eight analog inputs into processed measurements and communicating results through the USART. The 20 MHz clock supports responsive sampling and command handling, while self-programming enables field firmware updates. The 64-byte EEPROM can store small configuration records, although it is not intended for large data logging. Review the ADC acquisition timing and peripheral multiplexing requirements in the manufacturer data sheet before fixing the system clock and channel assignments.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC16F871-E/PT — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC16F871-I/PT | PIC16F871T-E/PT | PIC16F871T-I/PT |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 44-TQFP (10x10) | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same | 44-TQFP (10x10) - same |
| Product Type | 8-bit Flash Microcontroller | 8-bit Flash Microcontroller | 8-bit Flash Microcontroller | 8-bit Flash Microcontroller |
| Maximum Clock Frequency | 20 MHz | 20 MHz | 20 MHz | 20 MHz |
| Program Memory | 3.5 KB (2K x 14 words) | 3.5 KB | 3.5 KB | 3.5 KB |
| Data EEPROM | 64 bytes | 64 bytes | 64 bytes | 64 bytes |
| ADC Configuration | 8 channels, 10-bit resolution | 8 channels, 10-bit resolution | 8 channels, 10-bit resolution | 8 channels, 10-bit resolution |
| Supply Voltage Range | 4 V to 5.5 V | 4 V to 5.5 V | 4 V to 5.5 V | 4 V to 5.5 V |
| Maximum Operating Temperature | 125°C | 85°C | 125°C | 85°C |
| Self-Programming | Supported | Supported | Supported | Supported |
Pangunahing mga Pagkakaiba
- Extended-temperature operation (kumpara saPIC16F871-I/PT)
- Integrated analog measurement without a separate ADC (kumpara saPIC16F871-I/PT)
- Integrated persistent data and serial communications (kumpara saPIC16F871T-I/PT)
Talaan ng Disenyo
Route the 44-pin TQFP footprint exactly as defined by the manufacturer package drawing, paying particular attention to pin-1 orientation and lead pitch. Place the primary supply-decoupling capacitor close to the device’s supply and ground pins, provide a continuous ground plane, and keep oscillator traces short and away from high-current switching paths. Confirm every multiplexed peripheral assignment against the pin-description table before releasing the PCB artwork.
Design the supply network for the 4 V to 5.5 V operating range and check source impedance during high-current transitions. Place bulk and local bypass capacitors according to the manufacturer application guidance, and use separate return paths for noisy loads where practical. If the MCU drives relays, solenoids, or motor windings, use transistor or driver stages and prevent inductive transients from coupling directly into analog and oscillator circuitry.
Do not confuse the 44-pin PIC16F871 package with the 28-pin PIC16F870 package, and do not substitute an I-grade device when the system can exceed 85°C. Verify programming-pins, oscillator configuration, analog-channel assignments, and I/O direction settings in firmware. Also confirm that the selected ordering suffix matches the required reel or tray format before authorizing a production purchase.
Treat analog inputs as potentially noisy PCB nets even when they originate from sensors. Keep analog traces short, route them away from oscillator and switching-current paths, and use a continuous reference plane beneath the MCU. If several A/D channels are sampled concurrently, check the source impedance and acquisition-time requirements in the manufacturer data sheet; adding small series resistance near the source can help control settling behavior.
Impormasyon ng Pagsunod sa Kautusan
Compliance declarations for the exact ordered MPN were not identified in the cited product information and must be confirmed with Microchip Technology before regulated production use.