Microchip Technology

PIC24F08KL402T-I/SS - 16-Bit 8KB Flash MCU | Microchip

MPN: PIC24F08KL402T-I/SS ✓ সক্রিয়
3 V Vdss 18 mA per pin Id 28-pin SSOP Package 32 MHz Speed 8 KB (2.75K × 24 words) Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PIC24F08KL402T-I/SS সারাংশ

The Microchip Technology PIC24F08KL402T-I/SS is a 16-bit PIC24F XLP microcontroller with 32 MHz maximum performance, 8 KB of Flash program memory, 1 KB of RAM, and 512 bytes of EEPROM in a 28-pin SSOP package. It combines a 32 MHz operating frequency with 16 MIPS instruction throughput, a 12-channel 10-bit ADC, and nanoWatt XLP low-power features for cost-sensitive embedded systems.

A PIC24F microcontroller belongs to the 16-bit MCU hierarchy and provides a practical balance between processing performance, peripheral integration, memory capacity, and power efficiency. The PIC24F08KL402 family is positioned for compact control systems that require more arithmetic capability than an 8-bit MCU while retaining a relatively simple architecture, low-power operating modes, and a broad selection of serial and timing peripherals.

Key features include 8 KB of Flash memory organized as 2.75K × 24 words, 1 KB of RAM, 512 bytes of EEPROM, and an ADC with 12 channels and 10-bit resolution. The MCU also provides I2C and SPI through its MSSP peripheral, two 16-bit timer/counter blocks, up to two 8-bit timers, and two CCP modules for capture, compare, or PWM operation. Configurable open-drain digital outputs add flexibility for bus and signal interfaces.

The 32 MHz core delivers a maximum instruction rate of 16 MIPS, making the PIC24F08KL402T-I/SS suitable for responsive control loops and peripheral-heavy embedded products. Its nanoWatt XLP architecture supports low-power operation, which is valuable in battery-powered equipment, portable instruments, and systems that spend substantial time in sleep or idle states. The 10-bit ADC supports analog measurement while configurable digital outputs and serial interfaces expand system-level connectivity.

Typical applications include industrial sensor controllers, compact power-supply monitors, building-control modules, battery-powered instruments, serial data loggers, and low-cost embedded control boards. The combination of EEPROM, Flash, ADC, UART-like serial connectivity, timers, and PWM allows a compact design to perform measurement, control, configuration storage, and communications without requiring a separate external memory device.

PCB implementation should preserve short, clean return paths for analog and digital signals and provide suitable decoupling close to the supply pins. Because the SSOP footprint has closely spaced leads, inspect the manufacturer pin-description table before assigning tracks, programming connector signals, or checking exposed pad requirements. Validate the final component orientation and pin numbering against the package drawing before fabrication.

This product page combines the manufacturer product information, verified distributor specifications, application guidance, lifecycle considerations, and design-oriented comparison content. It is intended to help engineers identify the correct 28-pin PIC24F configuration and plan low-power, mixed-signal embedded designs without treating a similar package number as a guaranteed replacement.

এর জন্য ড্রপ-ইন বিকল্প PIC24F08KL402T-I/SS — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PIC24F08KL402T-I/SS (একই form factor এবং footprint).

Microchip Technology

এই পণ্যের জন্য কোনো ড্রপ-ইন বিকল্প পাওয়া যায়নি।

বিকল্প অনুরোধ করুন

PIC24F08KL402T-I/SS সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Architecture 16-bit
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Flash Memory 8 KB (2.75K × 24 words)
RAM 1 KB
EEPROM 512 bytes
ADC Resolution 10 bits
ADC Channels 12 channels
Digital I/O Sink Current 18 mA per pin
Digital I/O Source Current 18 mA per pin
Open-Drain Outputs Configurable on digital I/O pins
External Interrupt Sources Up to 3 sources
16-Bit Timer/Counters 2
8-Bit Timer/Counters Up to 2
Capture/Compare/PWM Modules 2 CCP modules
Serial Peripheral MSSP supporting I2C and SPI
সাপ্লাই ভোল্টেজ 3 V
Power Technology nanoWatt XLP
প্যাকেজ 28-pin SSOP

PIC24F08KL402T-I/SS 28-pin ssop পিন কনফিগারেশন গাইড

PIC24F08KL402T-I/SS (28-pin ssop প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

PIC24F08KL402T-I/SS-এর জন্য 28-pin ssop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PIC24F08KL402T-I/SS.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PIC24F08KL402T-I/SS এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Sensor Controller, Low-Power Data Logger, Power-Supply Monitor, Serial Communications Module, Building Control and Automation, LED and PWM Control.

🏭

Industrial Sensor Controller

The PIC24F08KL402T-I/SS fits compact industrial sensor nodes that combine analog measurement with low-power digital control. Its 12-channel, 10-bit ADC can monitor multiple sensor inputs, while the two 16-bit timer/counters support precise timing tasks and the CCP modules can generate PWM outputs. The 16-bit core operating at up to 32 MHz and 16 MIPS provides responsive signal processing without moving to a higher-power processor. EEPROM can retain calibration or configuration values across power cycles. Place the MCU near the sensor interface, route analog inputs away from switching nodes, and use the MSSP in I2C or SPI mode when the remote sensor requires a serial interface.

🔋

Low-Power Data Logger

The PIC24F08KL402T-I/SS is suitable for portable data-logging equipment that must balance storage, measurement, and standby power. Its 8 KB of Flash holds firmware and configuration data, while 1 KB of RAM supports working buffers and the 512-byte EEPROM preserves device identity or calibration information. The 10-bit ADC can sample sensors at a controlled interval, and the nanoWart XLP architecture supports low-power operating modes for long battery life. A practical design can wake with a timer, acquire measurements, store results in Flash or EEPROM, and return to sleep. Select external storage only when the application requires more than the MCU's internal memory.

⚡

Power-Supply Monitor

The PIC24F08KL402T-I/SS can supervise a compact power module by using its 10-bit ADC to monitor analog feedback and its digital I/O to inspect operating-state signals. Two CCP modules can support power-control or dimming functions, while the timer/counter blocks provide accurate delays and periodic measurement timing. The 32 MHz, 16-bit processing core is sufficient for supervisory logic, fault recording, and communication with a higher-level controller. EEPROM is useful for storing thresholds or event counters. The analog input network must respect the electrical limits in the manufacturer datasheet, and power rails should be sequenced only after checking which pins remain operational during reset.

🌐

Serial Communications Module

The PIC24F08KL402T-I/SS works for compact protocol-conversion and embedded communications equipment because its MSSP peripheral supports I2C and SPI while general-purpose digital I/O supports additional serial functions. At 32 MHz with 16 MIPS throughput, the MCU can frame packets, service timers, update indicators, and maintain protocol timing concurrently. Its 8 KB of Flash supports a moderate protocol stack or command table, and EEPROM can retain configuration parameters such as addresses or baud-rate settings. For a new PCB, route the serial interface away from ADC and PWM signals, provide stable clocking, and verify pin multiplexing in the exact 28-pin device documentation.

🏠

Building Control and Automation

The PIC24F08KL402T-I/SS is appropriate for distributed building-control nodes that monitor inputs and control limited loads. The 12-channel ADC can read potentiometers, temperature sensors, and other analog transducers, while timer/counter and CCP peripherals handle periodic sampling and actuator timing. Configurable open-drain outputs can support communication buses or wired sensor interfaces where appropriate. EEPROM preserves room-specific configuration, and the compact 28-pin SSOP package helps limit board area. Keep mains-derived or high-energy interfaces outside the MCU's electrical limits, use isolation where required, and design watchdog and reset behavior around the application's fail-safe requirements.

💡

LED and PWM Control

The PIC24F08KL402T-I/SS can drive dimming, indicator, or status-control circuitry using the resources of its two CCP modules. PWM generation, timing, and status updates can be handled by the 16-bit core while the MSSP communicates with a display or remote controller. The 32 MHz operating speed provides timing headroom for multiple control functions, and the 10-bit ADC can monitor a current-sense or potentiometer input for feedback control. Low-current LEDs may be connected through suitable driver transistors or buffers after checking the individual pin limits. High-current lighting should use a dedicated driver, while the MCU supplies control, timing, and fault-status information.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

What are the key specifications of PIC24F08KL402T-I/SS that engineers should know?
The PIC24F08KL402T-I/SS combines a 16-bit architecture, 32 MHz CPU frequency, 16 MIPS throughput, 8 KB of Flash memory, 1 KB of RAM, and 512 bytes of EEPROM. It also includes a 12-channel 10-bit ADC, two CCP modules, two 16-bit timer/counters, and MSSP support for I2C or SPI. According to the Microchip manufacturer datasheet and product page, the device is housed in a 28-pin SSOP package and uses nanoWatt XLP technology for low-power operation.
What is the operating voltage of PIC24F08KL402T-I/SS?
The PIC24F08KL402T-I/SS is associated with a 3 V supply configuration. According to the Microchip product documentation, this device belongs to the 3 V PIC24F08KL402 family. The exact minimum and maximum operating-voltage limits should be confirmed against the electrical-characteristics table for the exact ordering code before the device is used with a new power-supply design.
How much Flash, RAM, and EEPROM does PIC24F08KL402T-I/SS have?
The PIC24F08KL402T-I/SS provides 8 KB of Flash program memory, 1 KB of RAM, and 512 bytes of EEPROM. The Flash is described by the manufacturer listing as 2.75K × 24 words, reflecting the 16-bit instruction organization of the PIC24F architecture. According to the Microchip product page, the EEPROM provides nonvolatile storage for configuration values, calibration constants, or operating parameters that must survive a power cycle.
What peripherals are integrated into PIC24F08KL402T-I/SS?
The PIC24F08KL402T-I/SS integrates a 12-channel 10-bit ADC, MSSP serial interface for I2C or SPI, two CCP modules, two 16-bit timer/counters, and up to two 8-bit timer/counters with programmable prescaling. It also supports configurable open-drain outputs and up to three external interrupt sources. According to the Microchip product description, this combination provides flexible control, communication, and analog-measurement functions for compact embedded products.
What can replace PIC24F08KL402T-I/SS?
A true drop-in replacement must use the same 28-pin SSOP footprint, preserve the pin assignments, and match the 16-bit core, memory configuration, voltage range, and peripheral functions. The available cross-reference listings identify the related PIC24F08KL402-I/SS ordering code, but they do not establish five distinct, verified drop-in replacements. Use the Microchip cross-reference search and compare the exact pin, peripheral, memory, and electrical tables before approving any substitute.
What is the best Microchip equivalent for PIC24F08KL402T-I/SS?
The closest identified Microchip family equivalent is the PIC24F08KL402-I/SS because it shares the PIC24F08KL402 base device and 28-pin SSOP organization. The difference between the ordering codes must still be checked against the manufacturer ordering information, particularly for grade and packing attributes. For a cross-brand replacement, no verified pin-to-pin candidate was established, so the MCU cannot be replaced without a complete footprint, peripheral, memory, timing, and electrical comparison.
Where can I download the PIC24F08KL402T-I/SS datasheet PDF?
The official PIC24F08KL402T-I/SS documentation is available through the Microchip product page at https://www.microchip.com/en-us/product/PIC24F08KL402. The manufacturer product documentation provides the family datasheet, pin descriptions, electrical characteristics, memory maps, and peripheral details needed for design review. Use the ordering-information table to confirm which documentation and package drawings apply specifically to the 28-pin SSOP ordering code.
Where can I find the PIC24F08KL402T-I/SS pinout?
The pinout is defined in the pin-description and package-drawing sections of the Microchip PIC24F08KL402 manufacturer datasheet. The target device uses a 28-pin SSOP package, so the pin table must be checked for power, ground, programming, reset, analog-input, and peripheral-signal assignments before PCB routing. Do not infer the layout solely from a similar 28-pin MCU because multiplexing and analog functions can differ between family members.
When should I choose PIC24F08KL402T-I/SS over a similar MCU?
Choose the PIC24F08KL402T-I/SS when a design needs a 16-bit MCU with 32 MHz performance, 8 KB of Flash, 1 KB of RAM, 512 bytes of EEPROM, a 12-channel 10-bit ADC, and I2C/SPI connectivity in a 28-pin SSOP. According to the Microchip product page, its nanoWatt XLP design and PIC18-compatible peripherals make it particularly useful for cost-sensitive embedded controls that need low-power operation and integrated mixed-signal functions.
Is PIC24F08KL402T-I/SS suitable for low-power embedded applications?
The PIC24F08KL402T-I/SS is suitable for low-power embedded applications because the PIC24F08KL402 family uses nanoWart XLP technology and includes sleep-oriented operating features. Its 16-bit core and 32 MHz maximum frequency also allow useful processing throughput without requiring a more complex high-end MCU in every design. The appropriate duty cycle and peripherals should be evaluated in the application to determine the real average current.
PIC24F08KL402T-I/SS vs PIC24F08KL402-I/SS: which ordering code should I select?
Both ordering codes refer to the PIC24F08KL402 device family and the visible specifications describe the same 16-bit, 32 MHz, 8 KB Flash microcontroller in a 28-pin SSOP. Their exact ordering attributes must be checked in the manufacturer ordering table, including temperature grade, packing, and any suffix-defined options. The comparison should therefore focus on procurement and assembly requirements rather than assuming a functional difference in the core or peripherals.
Can PIC24F08KL402T-I/SS control motors, LEDs, and analog sensors?
The PIC24F08KL402T-I/SS can control and monitor many embedded signals, subject to the specific current, voltage, and timing limits in the manufacturer datasheet. Its two CCP modules support PWM output, the 12-channel 10-bit ADC measures analog sensor inputs, and digital I/O supports logic peripherals. For motors or high-power LED strings, add appropriate driver circuitry rather than driving the load directly from general-purpose microcontroller pins.
Where to buy PIC24F08KL402T-I/SS online?
Use the Request a Quote form on this page to request the PIC24F08KL402T-I/SS with the required packaging and quantity. The form lets you confirm current commercial availability, lead time, and a shipment-specific quotation without relying on a static price. For technical confirmation, review the Microchip manufacturer datasheet and the 28-pin SSOP package drawing before committing the component to a production design.
What is the price of PIC24F08KL402T-I/SS?
The current commercial price for PIC24F08KL402T-I/SS is determined by quantity, packaging, availability, and contractual terms. Request a quote through the Request a Quote form on this page for the exact ordering code and required quantity. The form provides the appropriate channel for a current quotation while avoiding a stale standalone figure that may not match your production schedule.
What is the lead time and stock status for PIC24F08KL402T-I/SS?
Current stock and lead time for PIC24F08KL402T-I/SS should be confirmed through the Request a Quote form on this page by entering the required quantity and target shipment information. Availability can change with production schedules and order volume, while the manufacturer product page remains the authoritative source for device identification. Requesting a quotation provides a direct response based on the current order requirement.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PIC24F08KL402T-I/SS — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose PIC24F08KL402T-I/SS when the design needs a 16-bit PIC24F MCU with 32 MHz performance, 8 KB of Flash, 1 KB of RAM, 512 bytes of EEPROM, a 12-channel 10-bit ADC, and I2C/SPI support in a 28-pin SSOP. It is especially useful for compact, low-power sensing and control products where mixed-signal measurement and EEPROM-backed configuration justify an MCU rather than a basic logic device. PIC24F08KL402-I/SS belongs to the same family and should be selected only after confirming its ordering attributes and lifecycle requirements. PIC24F08KL402T-I/SO uses a 28-pin SO package, so it is not a footprint-compatible substitute for an existing SSOP design. No cross-brand drop-in candidate was established with enough pin and peripheral evidence, so a redesign should not assume that an unrelated 28-pin MCU can replace this device.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য
Package 28-pin SSOP
Brand Microchip Technology
CPU Architecture 16-bit
Maximum CPU Frequency 32 MHz
Instruction Throughput 16 MIPS
Flash Memory 8 KB
RAM 1 KB
EEPROM 512 bytes
ADC 12-channel, 10-bit
Low-Power Technology nanoWart XLP

মূল পার্থক্যসমূহ

  • Integrated mixed-signal capability (বনামPIC24F08KL402-I/SS)
  • Instruction throughput for embedded control (বনামPIC24F08KL402-I/SS)
  • Low-power system integration (বনামPIC24F08KL402T-I/SO)

ডিজাইন নোট

Use the manufacturer package drawing and pin-description table to assign every connection before routing the 28-pin SSOP footprint. Pay particular attention to programming, reset, analog-reference, and multiplexed peripheral signals because their functions cannot be inferred from generic 28-pin MCU conventions. Keep the footprint and component orientation consistent with the assembly drawing, and verify pin 1 against the package marker before fabrication.

Route analog inputs away from PWM outputs, high-current switching nodes, and long digital traces. Place input filtering or sensing components close to the relevant pins, follow the datasheet recommendations for analog grounding, and keep the 10-bit ADC reference and supply connections stable. If the MCU also drives PWM-controlled loads, increase separation between analog and power paths and evaluate the finished board for switching-induced measurement error.

Design the 3 V supply path for both normal operation and the highest expected peripheral load. Apply the manufacturer recommendations for decoupling and place the required capacitors close to the appropriate supply and ground pins. For battery-powered designs, calculate the average current from active and sleep durations, then verify the external regulator's quiescent current; the MCU's low-power capability cannot compensate for excess current in the rest of the power path.

Do not treat a similar 28-pin ordering code as an automatic substitute. Validate the exact pin assignments, peripheral availability, memory organization, electrical limits, temperature grade, and package drawing before changing the MPN. In particular, review MSSP pin mapping, ADC inputs, CCP outputs, and programming pins on the schematic. A board-level substitution requires both footprint compatibility and functional equivalence across every connected signal.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The target is a general-purpose industrial-temperature-ordering-code microcontroller rather than an AEC-Q100 automotive-qualified variant. Explicit RoHS, REACH, lead-free, halogen-free, and conflict-minerals statements were not established.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

PIC24F08KL402T-I/SS datasheet PIC24F08KL402T-I/SS pinout PIC24F08KL402T-I/SS datasheet pdf PIC24F08KL402T-I/SS equivalent PIC24F08KL402T-I/SS replacement PIC24F08KL402T-I/SS price PIC24F08KL402T-I/SS stock PIC24F08KL402 32MHz 8KB PIC24F08KL402 28-SSOP pinout PIC24F08KL402 ADC application circuit Microchip PIC24F08KL402T-I/SS PIC24F08KL402T-I/SS vs PIC24F08KL402-I/SS

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology PIC24F08KL402T-I/SS PIC24F08KL402 PIC24F08KL402-I/SS PIC24F08KL402T-I/SO PIC24F PIC XLP 16-bit microcontroller embedded microcontroller mixed-signal MCU nanoWart XLP 32 MHz 16 MIPS 8 KB Flash 1 KB RAM 512-byte EEPROM 12-channel 10-bit ADC MSSP I2C SPI CCP module PWM 28-pin SSOP surface-mount package
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন