Microchip Technology

PIC24F16KL401T-I/SS - 32MHz 16-Bit XLP MCU | Microchip

MPN: PIC24F16KL401T-I/SS ✓ সক্রিয়
1.8 V to 3.6 V Vdss 20-pin SSOP Package 32 MHz Speed 16 KB Flash Memory
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

PIC24F16KL401T-I/SS সারাংশ

The Microchip Technology PIC24F16KL401T-I/SS is a 16-bit PIC24F microcontroller featuring nanoWatt XLP technology, a 32 MHz maximum clock, 16 KB of Flash program memory, 1 KB of data RAM, and a 20-pin SSOP package. The industrial-temperature device operates from -40°C to +85°C and is supplied in tape-and-reel packaging for surface-mount assembly.

A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters into one device. The PIC24F16KL401 family belongs to the broader embedded-controller hierarchy: general-purpose MCU, 16-bit RISC MCU, embedded processing IC, and semiconductor. It is intended for cost-sensitive embedded products that need moderate processing performance, low-power operation, and flexible serial connectivity without requiring a high-pin-count application processor.

The PIC24F16KL401T-I/SS provides 17 I/O pins, 12 10-bit ADC channels, six timers, and communication interfaces including dual I2C, dual SPI, dual UART, and IrDA. Its 512-byte EEPROM supports nonvolatile parameter storage, while 16 KB of Flash holds application firmware. The 1.8 V to 3.6 V operating range supports common 2.5 V and 3.3 V embedded systems, including portable accessories, medical devices, security products, and compact consumer equipment.

The device uses a modified Harvard architecture with distinct instruction and data pathways, supporting parallel memory access and efficient instruction execution. Its 32 MHz operating frequency provides useful headroom for control loops, communications, and mixed analog-digital measurement. The XLP feature set targets low-power operation, allowing software-driven sleep modes to reduce consumption in designs that spend substantial time waiting for external events.

The SSOP-20 package has a 0.65 mm terminal pitch and supports compact surface-mount layouts. Despite its small outline, the device retains a broad peripheral set: ADC channels can monitor sensors, timers can generate or capture timing signals, and the serial interfaces can connect sensors, displays, storage devices, or other embedded controllers. The result is a compact platform for control, acquisition, and communication duties in one component.

PCB design should follow the manufacturer’s SSOP-20 land pattern and pin-description table, and the exposed routing requirements of the selected package variant must be checked against the official device documentation. Firmware developers should also confirm the appropriate clock configuration, peripheral pin assignments, programming method, and decoupling arrangement for the target board. The Request a Quote form on this page supports current availability, lead-time, and sourcing inquiries.

This product record combines the exact orderable MPN, manufacturer specifications, package details, practical application guidance, lifecycle information, and a clearly documented drop-in comparison. It is intended to help engineers identify the correct XLP MCU, verify the 20-pin SSOP footprint, and plan firmware, analog, and low-power design work before release to manufacturing.

এর জন্য ড্রপ-ইন বিকল্প PIC24F16KL401T-I/SS — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible PIC24F16KL401T-I/SS (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, ADC Resolution, EEPROM, I/O Pins, Operating Temperature.

Microchip Technology
EEPROM: 512 B
I/O Pins: 18
Operating Temperature: -40 C to +125 C (E = Extended)
Microchip Technology
Package: 20-pin SSOP, 5.30 mm width
ADC Resolution: 10 bit
Operating Temperature: -40°C to +85°C

PIC24F16KL401-E/SS

✅ ড্রপ-ইন
Microchip Technology
📦 20-pin SSOP
PIC24F (16-bit MIPS16e) · 16 KB (5.5K x 24 instructions) · 1 KB · 512 B · 32 MHz (16 MIPS) · 1.8 V to 3.6 V · 18 · 10-bit

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PIC24F16KL401-I/SS

✅ ড্রপ-ইন
Microchip Technology
📦 20-pin SSOP
16-bit PIC RISC · 32 MHz · 16 KB (5.5K x 24 words) · 1 KB · 10 bit · 3 V · 2.5 V to 3.3 V · -40°C to +85°C

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

PIC24F16KL401T-I/SS সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Architecture 16-bit modified Harvard RISC
Maximum CPU Frequency 32 MHz
Program Memory 16 KB Flash
Program Memory Organization 5.5K x 24 words
Data RAM 1 KB
EEPROM 512 bytes
I/O Pins 17
ADC Resolution 10 bits
ADC Channels 12
Timer Count 6
I2C Interfaces 2
SPI Interfaces 2
UART Interfaces 2
IrDA Support Yes
Supply Voltage Range 1.8 V to 3.6 V
অপারেটিং তাপমাত্রার পরিসর -40°C to +85°C
প্যাকেজ 20-pin SSOP
Terminal Pitch 0.65 mm
মাউন্টিং টাইপ Surface mount
Packaging Tape and reel
Power Technology nanoWatt XLP
Programming ICSP and low-voltage programming
Lead-Free Status Lead-free

PIC24F16KL401T-I/SS 20-pin ssop পিন কনফিগারেশন গাইড

PIC24F16KL401T-I/SS (20-pin ssop প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।

PIC24F16KL401T-I/SS-এর জন্য 20-pin ssop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PIC24F16KL401T-I/SS.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

PIC24F16KL401T-I/SS এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable Medical Sensor Interface, Industrial Sensor Node, Battery-Powered Portable Device, Security and Access-Control Module, LED Lighting Controller, Consumer Connectivity Hub.

💊

Portable Medical Sensor Interface

The PIC24F16KL401T-I/SS fits compact medical-sensor interfaces that require acquisition, control, and short-range communications on one board. Its 12-channel 10-bit ADC can monitor simple analog sensor nodes, while six timers support sampling intervals and precise timing for pumps, meters, or disposable diagnostic devices. The 1 KB RAM and 512-byte EEPROM are sufficient for small working sets, calibration constants, and operating records. Two I2C and two SPI interfaces allow sensors and external signal-conditioning devices to share the MCU. At 32 MHz, the core can handle sampling, filtering, user-interface updates, and protocol servicing without requiring a separate processor. The -40°C to +85°C rating supports industrial-temperature equipment, although medical-system qualification remains a system-level responsibility.

🏭

Industrial Sensor Node

The PIC24F16KL401T-I/SS is appropriate for a compact industrial sensor node that combines analog measurement, digital I/O, and serial telemetry. Its 17 I/O pins can support discrete inputs, alarm outputs, status indicators, and actuator controls, while the 12 ADC channels accommodate voltage-based sensors. The MCU’s 32 MHz processing rate provides enough control bandwidth for local filtering, threshold logic, diagnostics, and protocol handling. Two UARTs and two SPI interfaces simplify connection of local converters or radio modules, and IrDA support can serve short-range optical links where appropriate. The 1.8 V to 3.6 V range permits use with 2.5 V and 3.3 V sensor rails. The -40°C to +85°C industrial-temperature grade helps satisfy demanding factory-floor conditions when paired with proper input protection.

📱

Battery-Powered Portable Device

The PIC24F16KL401T-I/SS suits battery-powered accessories in which a low-cost, low-power controller replaces a higher-performance application processor. Its nanoWatt XLP technology supports sleep-based duty cycles, and the 1.8 V minimum operating voltage offers compatibility with low-voltage battery systems. Sixteen kilobytes of Flash can hold a focused control application, while 1 KB of RAM and 512 bytes of EEPROM support state and configuration storage. The six timers help schedule sensor sampling and low-power wake events, while I2C or SPI can connect a low-power sensor or display. Runtime depends on the selected clock mode, active workload, sensor load, and regulator efficiency, so engineers should use the manufacturer’s power tables and measure the final board rather than rely on a generic current figure.

🔒

Security and Access-Control Module

The PIC24F16KL401T-I/SS can serve as the controller in a compact access-control, keypad, or alarm module where firmware-driven logic and serial peripherals are more important than a large operating system. The two UARTs support configuration-console or external-controller communication, while two I2C and two SPI interfaces can connect secure elements, displays, proximity sensors, or storage. Sixteen kilobytes of Flash is suitable for a focused state machine and event-processing application, while EEPROM can retain configuration values. The 10-bit ADC is also useful for simple battery or analog supervision when its accuracy is adequate. Security-sensitive designs must add the required cryptographic mechanisms, physical protections, and secure production procedures; the MCU’s communication interfaces alone do not establish a security certification.

💡

LED Lighting Controller

The PIC24F16KL401T-I/SS can control compact LED lighting modules because it combines six timers, 17 I/O pins, ADC inputs, and multiple serial interfaces in a 20-pin package. Timers support PWM generation, dimming sequences, and timing functions, while the ADC can supervise a voltage divider or current-sense signal when the board provides suitable conditioning. I2C is useful for LED drivers and digital potentiometers, SPI can serve expanders or display controllers, and UART supports commissioning or external control. The 32 MHz clock provides headroom for dimming updates, fault monitoring, and communication handling. Because LED loads can introduce transient and electromagnetic noise, designers should isolate high-current drive stages, use the recommended decoupling, keep switching loops compact, and validate conducted and radiated emissions at the finished-product level.

🧩

Consumer Connectivity Hub

The PIC24F16KL401T-I/SS is suitable for a small connectivity hub that coordinates sensors and short-range links in consumer or IoT accessories. Two I2C ports and two SPI ports can connect several low-bandwidth peripherals, while two UARTs allow host communication or connection to a wireless module. The 12 ADC channels permit basic analog sensing and power supervision, and six timers can handle timing, wake-up, or simple output functions. Its 16 KB Flash and 1 KB RAM are appropriate for protocol bridging, configuration, and modest data processing rather than demanding edge-AI workloads. A 1.8 V to 3.6 V supply range supports low-voltage radio modules and portable products. Firmware should use the XLP sleep modes when idle, and the PCB must provide clean grounding and decoupling around both the MCU and any attached radio circuitry.

What are the key specifications of PIC24F16KL401T-I/SS that engineers should know?
The PIC24F16KL401T-I/SS is a 16-bit XLP microcontroller with a 32 MHz maximum clock, 16 KB Flash, 1 KB RAM, 512 bytes of EEPROM, and 17 I/O pins in a 20-pin SSOP package. According to the Microchip product page and device documentation, it also includes 12 10-bit ADC channels, six timers, two I2C interfaces, two SPI interfaces, two UARTs, and IrDA support. Its 1.8 V to 3.6 V supply range and -40°C to +85°C industrial-temperature rating suit compact 2.5 V and 3.3 V embedded designs.
What is the operating voltage of PIC24F16KL401T-I/SS?
The PIC24F16KL401T-I/SS operates from 1.8 V to 3.6 V. According to the Microchip PIC24F16KL401 device documentation, this range supports low-voltage 2.5 V and 3.3 V systems. Designers should place local bypass capacitors close to the supply pins and follow the recommended decoupling network in the manufacturer’s hardware guidelines. The operating range does not remove the need to verify each peripheral’s voltage tolerance and analog-reference requirements in the complete design.
How much memory does PIC24F16KL401T-I/SS have?
The PIC24F16KL401T-I/SS contains 16 KB of Flash program memory, 1 KB of data RAM, and 512 bytes of EEPROM. The Flash is organized as 5.5K by 24 words, as stated by the Microchip product documentation. This combination supports a compact control program, working variables, and nonvolatile configuration or calibration data. Applications requiring substantially larger application code or data buffers should include the MCU in their memory-footprint analysis before committing to the PCB.
Where can I download the PIC24F16KL401T-I/SS datasheet PDF?
The official PIC24F16KL401T-I/SS documentation is available through Microchip’s product page at https://www.microchip.com/en-us/product/PIC24F16KL401. Select the device documentation resources for the matching PIC24F16KL401 family and verify that the electrical characteristics and package diagrams apply to the 20-pin SSOP variant. Use the pin-description table, memory map, and electrical characteristics together when assigning pins, configuring the ADC, selecting bypass capacitors, and checking operating limits.
Where can I find the PIC24F16KL401T-I/SS pinout?
The PIC24F16KL401T-I/SS pinout is identified in the pin-description and package diagrams associated with Microchip’s PIC24F16KL401 documentation. The exact orderable device uses a 20-pin SSOP with a 0.65 mm terminal pitch. During schematic capture, map every power, ground, programming, reset, clock, analog, and digital I/O signal against that table rather than inferring connections from a generic 20-pin footprint. The packaging drawing also defines the board land pattern and device orientation.
Can PIC24F16KL401T-I/SS be used for low-power embedded products?
Yes, the PIC24F16KL401T-I/SS is designed for low-power embedded designs through its nanoWait XLP technology and 16-bit PIC24F architecture. The device operates from 1.8 V to 3.6 V and includes 1 KB of RAM and 512 bytes of EEPROM for designs with modest working-data requirements. Low-power performance should be evaluated using the manufacturer’s sleep-mode current tables, peripheral clocking options, and the board’s own leakage paths rather than a single headline current figure.
What communication interfaces are available on PIC24F16KL401T-I/SS?
The PIC24F16KL401T-I/SS provides two I2C interfaces, two SPI interfaces, two UART interfaces, and IrDA support. According to the Microchip device description, MSSP peripherals handle I2C and SPI while the additional serial resources support point-to-point and infrared-oriented communication. The available peripheral instances can be assigned among suitable I/O pins, so firmware developers should verify alternate-function mappings and pin multiplexing in the manufacturer’s pin-description table before fixing the PCB connections.
What can replace PIC24F16KL401T-I/SS on the same PCB?
PIC24F16KL401-I/SS is the closest identified same-footprint alternative because it uses the same 20-pin SSOP device and is listed with matching 16 KB Flash, 1 KB RAM, 512-byte EEPROM, and 10-bit ADC characteristics; its primary difference is tube rather than tape-and-reel packaging. PIC24F16KL401-E/SS is another 20-pin SSOP family option for broader temperature-range review. Confirm the exact grade, operating limits, programming configuration, and supply availability before substituting either part.
Is PIC24F16KL401T-I/SS suitable for sensor and industrial control applications?
The PIC24F16KL401T-I/SS is suitable for cost-sensitive sensor and control products that need a 10-bit ADC, multiple timers, and serial connectivity without a larger package. It offers 12 ADC channels, six timers, 17 I/O pins, two I2C interfaces, two SPI interfaces, and two UARTs, while its -40°C to +85°C rating supports industrial-temperature environments. Choose external precision references and signal conditioning when measurement accuracy exceeds the MCU’s general-purpose ADC capabilities.
What is the difference between PIC24F16KL401T-I/SS and PIC24F16KL401-I/SS?
PIC24F16KL401T-I/SS and PIC24F16KL401-I/SS use the same 20-pin SSOP device family, while the suffix T identifies tape-and-reel ordering and the non-T listing is associated with tube delivery. Their listed core characteristics align at 32 MHz, 16 KB Flash, 1 KB RAM, 512-byte EEPROM, and 10-bit ADC. The difference is primarily order packaging; the PCB footprint remains the same, but production automation and reel-handling requirements must match the selected suffix.
What is the best Microchip equivalent for PIC24F16KL401T-I/SS?
PIC24F16KL401-E/SS is the closest identified Microchip family alternative with the same 20-pin SSOP format, core 16-bit architecture, and PIC24F16KL401 function set. The exact ordering code indicates a different temperature-grade option, so its electrical limits must be checked against the target operating environment. If the grade and package are acceptable, it provides a same-footprint path for redesigns while retaining the family’s 16 KB Flash, 1 KB RAM, and serial peripheral resources.
When should I choose PIC24F16KL401T-I/SS instead of a larger PIC24F microcontroller?
Choose PIC24F16KL401T-I/SS when the product needs no more than 16 KB Flash, 1 KB RAM, 17 I/O pins, and 12 ADC channels. Its 20-pin SSOP package is appropriate for compact boards using 2.5 V or 3.3 V power and industrial temperatures from -40°C to +85°C. Move to a larger PIC24F device when firmware growth, RAM demand, more ADC inputs, additional I/O, or faster specialized peripherals exceed these resources, because moving to a larger package would then require a new PCB layout.
Is PIC24F16KL401T-I/SS suitable for battery-operated devices?
The PIC24F16KL401T-I/SS can be used in battery-operated devices because its nanoWait XLP architecture targets low-power operation and its minimum operating voltage is 1.8 V. Actual battery life depends on the selected sleep modes, active duty cycle, ADC usage, oscillator configuration, sensor current, and regulator quiescent current. Use the manufacturer’s power-management modes and current-characterization tables, and measure the assembled product under its real operating profile to establish a defensible runtime estimate.
Where to buy PIC24F16KL401T-I/SS online?
Use the Request a Quote form on this page to request the exact PIC24F16KL401T-I/SS orderable MPN, current stock position, lead time, and order quantity. The form is the appropriate channel for sourcing this tape-and-reel microcontroller because its availability can change with production and distribution cycles. Include your required quantity, target date, and packaging expectations in the request so the quote can be matched to the 20-pin SSOP configuration rather than a related grade or package suffix.
What is the price and lead time for PIC24F16KL401T-I/SS?
Current commercial terms for PIC24F16KL401T-I/SS should be requested through the Request a Quote form on this page. The form supports an inquiry for unit pricing, minimum order quantity, production lead time, and stock availability for the exact tape-and-reel MPN. Include the required quantity and delivery schedule when submitting the request. Avoid substituting a related tube-packaged, extended-temperature, or alternate-package variant unless that difference has been formally approved for the design.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PIC24F16KL401T-I/SS — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose PIC24F16KL401T-I/SS for a compact, cost-sensitive embedded product that needs a 32 MHz 16-bit core, 16 KB Flash, 1 KB RAM, 17 I/O pins, and 12 ADC channels within a 20-pin SSOP footprint. Its two I2C ports, two SPI ports, two UARTs, six timers, IrDA support, and 1.8 V to 3.6 V operating range make it suitable for sensors, portable accessories, LED controllers, and small communication hubs. Select PIC24F16KL401-I/SS when the electrical and temperature requirements are equivalent but tube-format procurement or prototyping is preferred. Evaluate PIC24F16KL401-E/SS when its documented temperature grade better matches the product environment. Do not assume that similarly named MQ or SO variants are drop-in parts because their package constructions differ. A larger PIC24F device is preferable when firmware, RAM, I/O, ADC-channel, or peripheral requirements exceed this controller’s capacity.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য PIC24F16KL401-E/SS PIC24F16KL401-I/SS
Brand Microchip Technology Microchip Technology Microchip Technology
Package 20-pin SSOP 20-pin SSOP 20-pin SSOP

মূল পার্থক্যসমূহ

  • Combines XLP low-power operation with a broad peripheral set in 20 pins (বনামPIC24F16KL401-I/SS)
  • Supports compact mixed analog and serial control designs (বনামPIC24F16KL401-E/SS)
  • Direct 3.3 V and 2.5 V embedded-system support (বনামPIC24F16KL401-E/SS)
  • Production-oriented tape-and-reel ordering (বনামPIC24F16KL401-I/SS)

ডিজাইন নোট

Use the manufacturer’s 20-pin SSOP footprint with a 0.65 mm terminal pitch and verify pin-one orientation against the package drawing before releasing artwork. Place the MCU close to the system ground plane and route analog inputs away from switching nodes and high-current LED or relay paths. Keep programming, reset, and clock loops short, and provide test points for the programming interface so production programming and validation do not require redesigning the board.

Follow the manufacturer’s recommended supply and bypass-capacitor arrangement for the 1.8 V to 3.6 V operating range. Place high-frequency bypass capacitance at the device supply pins and connect it to a low-impedance ground reference. Because ADC accuracy, digital supply noise, and XLP wake behavior can be affected by the power network, measure the assembled rail under active processing, peripheral operation, and sleep transitions before treating the power design as complete.

Do not select a related suffix by appearance alone. The target T-I/SS order code combines tape-and-reel delivery, the -I temperature option, and the SSOP package; variants with MQ or SO package codes use different physical constructions and may not fit the same PCB. Also avoid treating the 10-bit ADC as a precision converter without checking input range, acquisition time, reference accuracy, source impedance, and external signal conditioning. A same-footprint replacement must still be checked for programming, clock, and peripheral compatibility.

Plan the 17 available I/O pins around the device’s alternate-function assignments before finalizing the schematic. Two I2C, two SPI, two UART, IrDA, six timers, and the 12 ADC channels may share pins with alternate functions. Create a firmware-to-pin matrix, identify mandatory programming and debug pins, and reserve bootloader or recovery access where required. This prevents late reassignment of communication or analog signals that would otherwise disturb the SSOP layout and PCB routing.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Yes
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The device is identified as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status require confirmation from the current manufacturer declaration for the exact orderable MPN.

ডেটা যাচাই করা হয়েছে: 2026-11-16 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

PIC24F16KL401T-I/SS datasheet PIC24F16KL401T-I/SS pinout PIC24F16KL401T-I/SS datasheet pdf PIC24F16KL401T-I/SS specifications PIC24F16KL401T-I/SS replacement PIC24F16KL401T-I/SS equivalent PIC24F16KL401 SSOP-20 pinout PIC24F16KL401 32MHz microcontroller PIC24F16KL401 16KB Flash 1KB RAM PIC24F16KL401 XLP application circuit PIC24F16KL401T-I/SS vs PIC24F16KL401-I/SS PIC24F16KL401T-I/SS price PIC24F16KL401T-I/SS stock Microchip PIC24F16KL401T-I/SS

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Microchip Technology PIC24F16KL401T-I/SS PIC24F16KL401-I/SS PIC24F16KL401-E/SS PIC24F PIC24F16KL401 16-bit microcontroller modified Harvard architecture RISC MCU embedded controller general-purpose MCU nanoWatt XLP XLP low-power technology Flash program memory EEPROM 10-bit ADC I2C SPI UART IrDA ICSP low-voltage programming 20-pin SSOP 0.65 mm pitch surface mount industrial temperature range
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন