PIC24F16KL401T-I/SS - 32MHz 16-Bit XLP MCU | Microchip
MPN: PIC24F16KL401T-I/SS ✓ NakahandaPIC24F16KL401T-I/SS Ulas
A microcontroller is a programmable semiconductor that integrates a processor core, memory, and peripherals such as timers, serial interfaces, and analog-to-digital converters into one device. The PIC24F16KL401 family belongs to the broader embedded-controller hierarchy: general-purpose MCU, 16-bit RISC MCU, embedded processing IC, and semiconductor. It is intended for cost-sensitive embedded products that need moderate processing performance, low-power operation, and flexible serial connectivity without requiring a high-pin-count application processor.
The PIC24F16KL401T-I/SS provides 17 I/O pins, 12 10-bit ADC channels, six timers, and communication interfaces including dual I2C, dual SPI, dual UART, and IrDA. Its 512-byte EEPROM supports nonvolatile parameter storage, while 16 KB of Flash holds application firmware. The 1.8 V to 3.6 V operating range supports common 2.5 V and 3.3 V embedded systems, including portable accessories, medical devices, security products, and compact consumer equipment.
The device uses a modified Harvard architecture with distinct instruction and data pathways, supporting parallel memory access and efficient instruction execution. Its 32 MHz operating frequency provides useful headroom for control loops, communications, and mixed analog-digital measurement. The XLP feature set targets low-power operation, allowing software-driven sleep modes to reduce consumption in designs that spend substantial time waiting for external events.
The SSOP-20 package has a 0.65 mm terminal pitch and supports compact surface-mount layouts. Despite its small outline, the device retains a broad peripheral set: ADC channels can monitor sensors, timers can generate or capture timing signals, and the serial interfaces can connect sensors, displays, storage devices, or other embedded controllers. The result is a compact platform for control, acquisition, and communication duties in one component.
PCB design should follow the manufacturer’s SSOP-20 land pattern and pin-description table, and the exposed routing requirements of the selected package variant must be checked against the official device documentation. Firmware developers should also confirm the appropriate clock configuration, peripheral pin assignments, programming method, and decoupling arrangement for the target board. The Request a Quote form on this page supports current availability, lead-time, and sourcing inquiries.
This product record combines the exact orderable MPN, manufacturer specifications, package details, practical application guidance, lifecycle information, and a clearly documented drop-in comparison. It is intended to help engineers identify the correct XLP MCU, verify the 20-pin SSOP footprint, and plan firmware, analog, and low-power design work before release to manufacturing.
Mga alternatibo na pwedeng ilagay na PIC24F16KL401T-I/SS — parehas na package, pin-to-pin na katugmang. Hindi kasama ang mga bahagi ng iba't-ibang package na nangangailangan ng pagpapaayos ng PCB.
Variante sa Seri na ito
Katulad na modelo sa serye na katugma sa pagpasok PIC24F16KL401T-I/SS (parehas na form factor at footprint) — pagkakaiba sa Package, ADC Resolution, EEPROM, I/O Pins, Operating Temperature.
PIC24F16KL401-E/SS
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24F16KL401-I/SS
✅ Drop-InMagkontak para sa presyo
Tingnan ang Datasheet →PIC24F16KL401T-I/SS Mga Pinakamataas na Rating at Electrical Characteristics
| Architecture | 16-bit modified Harvard RISC |
| Maximum CPU Frequency | 32 MHz |
| Program Memory | 16 KB Flash |
| Program Memory Organization | 5.5K x 24 words |
| Data RAM | 1 KB |
| EEPROM | 512 bytes |
| I/O Pins | 17 |
| ADC Resolution | 10 bits |
| ADC Channels | 12 |
| Timer Count | 6 |
| I2C Interfaces | 2 |
| SPI Interfaces | 2 |
| UART Interfaces | 2 |
| IrDA Support | Yes |
| Supply Voltage Range | 1.8 V to 3.6 V |
| Hanay ng Temperature na Operasyon | -40°C to +85°C |
| Packhaging | 20-pin SSOP |
| Terminal Pitch | 0.65 mm |
| Uri ng Pagpapasok | Surface mount |
| Packaging | Tape and reel |
| Power Technology | nanoWatt XLP |
| Programming | ICSP and low-voltage programming |
| Lead-Free Status | Lead-free |
Gabay sa Pin Configuration ng PIC24F16KL401T-I/SS 20-pin ssop
Pin configuration para sa PIC24F16KL401T-I/SS (20-pin ssop package). Kasama sa digital IC na ito ang GPIO, mga communication interface (UART, SPI, I2C), at mga power pin. Sumangguni sa datasheet ng manufacturer para sa mga alternatibong function ng pin at mga opsyon sa configuration. Mahalaga para sa disenyo ng embedded system at PCB layout.
Wala ng detalyadong pinout data na magagamit para sa PIC24F16KL401T-I/SS.
Sumangguni sa datasheet para sa buong pin configuration.
Tipikal na mga Gamit
PIC24F16KL401T-I/SS ay nararapat para sa 6 aplikasyons: Portable Medical Sensor Interface, Industrial Sensor Node, Battery-Powered Portable Device, Security and Access-Control Module, LED Lighting Controller, Consumer Connectivity Hub.
Portable Medical Sensor Interface
The PIC24F16KL401T-I/SS fits compact medical-sensor interfaces that require acquisition, control, and short-range communications on one board. Its 12-channel 10-bit ADC can monitor simple analog sensor nodes, while six timers support sampling intervals and precise timing for pumps, meters, or disposable diagnostic devices. The 1 KB RAM and 512-byte EEPROM are sufficient for small working sets, calibration constants, and operating records. Two I2C and two SPI interfaces allow sensors and external signal-conditioning devices to share the MCU. At 32 MHz, the core can handle sampling, filtering, user-interface updates, and protocol servicing without requiring a separate processor. The -40°C to +85°C rating supports industrial-temperature equipment, although medical-system qualification remains a system-level responsibility.
Inirekomenda
Industrial Sensor Node
The PIC24F16KL401T-I/SS is appropriate for a compact industrial sensor node that combines analog measurement, digital I/O, and serial telemetry. Its 17 I/O pins can support discrete inputs, alarm outputs, status indicators, and actuator controls, while the 12 ADC channels accommodate voltage-based sensors. The MCU’s 32 MHz processing rate provides enough control bandwidth for local filtering, threshold logic, diagnostics, and protocol handling. Two UARTs and two SPI interfaces simplify connection of local converters or radio modules, and IrDA support can serve short-range optical links where appropriate. The 1.8 V to 3.6 V range permits use with 2.5 V and 3.3 V sensor rails. The -40°C to +85°C industrial-temperature grade helps satisfy demanding factory-floor conditions when paired with proper input protection.
Inirekomenda
Battery-Powered Portable Device
The PIC24F16KL401T-I/SS suits battery-powered accessories in which a low-cost, low-power controller replaces a higher-performance application processor. Its nanoWatt XLP technology supports sleep-based duty cycles, and the 1.8 V minimum operating voltage offers compatibility with low-voltage battery systems. Sixteen kilobytes of Flash can hold a focused control application, while 1 KB of RAM and 512 bytes of EEPROM support state and configuration storage. The six timers help schedule sensor sampling and low-power wake events, while I2C or SPI can connect a low-power sensor or display. Runtime depends on the selected clock mode, active workload, sensor load, and regulator efficiency, so engineers should use the manufacturer’s power tables and measure the final board rather than rely on a generic current figure.
Inirekomenda
Security and Access-Control Module
The PIC24F16KL401T-I/SS can serve as the controller in a compact access-control, keypad, or alarm module where firmware-driven logic and serial peripherals are more important than a large operating system. The two UARTs support configuration-console or external-controller communication, while two I2C and two SPI interfaces can connect secure elements, displays, proximity sensors, or storage. Sixteen kilobytes of Flash is suitable for a focused state machine and event-processing application, while EEPROM can retain configuration values. The 10-bit ADC is also useful for simple battery or analog supervision when its accuracy is adequate. Security-sensitive designs must add the required cryptographic mechanisms, physical protections, and secure production procedures; the MCU’s communication interfaces alone do not establish a security certification.
Inirekomenda
LED Lighting Controller
The PIC24F16KL401T-I/SS can control compact LED lighting modules because it combines six timers, 17 I/O pins, ADC inputs, and multiple serial interfaces in a 20-pin package. Timers support PWM generation, dimming sequences, and timing functions, while the ADC can supervise a voltage divider or current-sense signal when the board provides suitable conditioning. I2C is useful for LED drivers and digital potentiometers, SPI can serve expanders or display controllers, and UART supports commissioning or external control. The 32 MHz clock provides headroom for dimming updates, fault monitoring, and communication handling. Because LED loads can introduce transient and electromagnetic noise, designers should isolate high-current drive stages, use the recommended decoupling, keep switching loops compact, and validate conducted and radiated emissions at the finished-product level.
Inirekomenda
Consumer Connectivity Hub
The PIC24F16KL401T-I/SS is suitable for a small connectivity hub that coordinates sensors and short-range links in consumer or IoT accessories. Two I2C ports and two SPI ports can connect several low-bandwidth peripherals, while two UARTs allow host communication or connection to a wireless module. The 12 ADC channels permit basic analog sensing and power supervision, and six timers can handle timing, wake-up, or simple output functions. Its 16 KB Flash and 1 KB RAM are appropriate for protocol bridging, configuration, and modest data processing rather than demanding edge-AI workloads. A 1.8 V to 3.6 V supply range supports low-voltage radio modules and portable products. Firmware should use the XLP sleep modes when idle, and the PCB must provide clean grounding and decoupling around both the MCU and any attached radio circuitry.
Inirekomenda
Buod ng mga Inirekomendang Produkto
Impormasyon ng Talumpati sa Engineering for PIC24F16KL401T-I/SS — ikabit, gabay sa disenyo, at impormasyon ng pagsunod sa kautusan.
Paunawang Hanapin
Ikabit sa Mga Alternatibo
| Parametro | Ito ang Producto | PIC24F16KL401-E/SS | PIC24F16KL401-I/SS |
|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 20-pin SSOP | 20-pin SSOP | 20-pin SSOP |
Pangunahing mga Pagkakaiba
- Combines XLP low-power operation with a broad peripheral set in 20 pins (kumpara saPIC24F16KL401-I/SS)
- Supports compact mixed analog and serial control designs (kumpara saPIC24F16KL401-E/SS)
- Direct 3.3 V and 2.5 V embedded-system support (kumpara saPIC24F16KL401-E/SS)
- Production-oriented tape-and-reel ordering (kumpara saPIC24F16KL401-I/SS)
Talaan ng Disenyo
Use the manufacturer’s 20-pin SSOP footprint with a 0.65 mm terminal pitch and verify pin-one orientation against the package drawing before releasing artwork. Place the MCU close to the system ground plane and route analog inputs away from switching nodes and high-current LED or relay paths. Keep programming, reset, and clock loops short, and provide test points for the programming interface so production programming and validation do not require redesigning the board.
Follow the manufacturer’s recommended supply and bypass-capacitor arrangement for the 1.8 V to 3.6 V operating range. Place high-frequency bypass capacitance at the device supply pins and connect it to a low-impedance ground reference. Because ADC accuracy, digital supply noise, and XLP wake behavior can be affected by the power network, measure the assembled rail under active processing, peripheral operation, and sleep transitions before treating the power design as complete.
Do not select a related suffix by appearance alone. The target T-I/SS order code combines tape-and-reel delivery, the -I temperature option, and the SSOP package; variants with MQ or SO package codes use different physical constructions and may not fit the same PCB. Also avoid treating the 10-bit ADC as a precision converter without checking input range, acquisition time, reference accuracy, source impedance, and external signal conditioning. A same-footprint replacement must still be checked for programming, clock, and peripheral compatibility.
Plan the 17 available I/O pins around the device’s alternate-function assignments before finalizing the schematic. Two I2C, two SPI, two UART, IrDA, six timers, and the 12 ADC channels may share pins with alternate functions. Create a firmware-to-pin matrix, identify mandatory programming and debug pins, and reserve bootloader or recovery access where required. This prevents late reassignment of communication or analog signals that would otherwise disturb the SSOP layout and PCB routing.
Impormasyon ng Pagsunod sa Kautusan
The device is identified as lead-free. RoHS, REACH, AEC-Q100, halogen-free, and conflict-minerals status require confirmation from the current manufacturer declaration for the exact orderable MPN.