PIC24FJ64GL306-I/MR - 16-bit 64KB LCD MCU | Microchip
MPN: PIC24FJ64GL306-I/MR ✓ সক্রিয়PIC24FJ64GL306-I/MR সারাংশ
A low-power microcontroller is a semiconductor device designed to conserve energy while executing control tasks. The PIC24FJ64GL306 belongs to the PIC24F low-power MCU family, combining a 16-bit CPU, embedded Flash, data RAM, interrupt-driven peripherals, and LCD drive functions within one integrated circuit. This integration allows a compact instrument, meter, or display module to retain processing state while operating at reduced power.
Core features include 64 KB of ECC Flash for program storage and 8 KB of RAM for working data. The manufacturer describes sleep current down to a few hundreds of nanoseconds of current demand for the PIC24FJ and GL families, supporting battery-powered operation where the display and control electronics spend much of their time idle. The integrated LCD controller extends the family's core independent peripheral approach into segmented display drive functions.
The PIC24FJ64GL306 combines a 16-bit architecture with a 16 MIPS performance rating and operation up to 32 MHz. The 64-pin QFN package provides a high pin count for LCD segment connections, control interfaces, and general-purpose I/O while remaining compatible with dense surface-mount layouts. Its peripheral architecture is intended to offload common control functions and reduce dependence on external components.
Typical uses include digital thermometers, utility meters, small appliance panels, battery-operated monitors, pump controllers, and industrial human-interface panels. The LCD controller suits products with segmented character or graphic displays, while the Flash and RAM capacity supports self-contained firmware, display tables, calibration data, and communication handling without an external memory device.
When planning a PCB layout, follow the exposed-pad and thermal-land requirements in the manufacturer datasheet and route the LCD outputs away from sensitive analog and communication nets. Check the exact pin multiplexing, programming interface, decoupling requirements, and supported operating voltage in the device documentation before releasing the layout.
This page combines the manufacturer product information with distributor listings and presents the key memory, speed, packaging, low-power, and LCD characteristics in one place. It also provides application guidance, parameter comparisons, and design notes that help engineers evaluate the PIC24FJ64GL306-I/MR for new low-power display-based designs.
এর জন্য ড্রপ-ইন বিকল্প PIC24FJ64GL306-I/MR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible PIC24FJ64GL306-I/MR (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Sleep Current.
PIC24FJ64GL306-E/MR
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →PIC24FJ64GL305-I/MR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PIC24FJ64GL304-I/MR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
PIC24FJ64GL306-I/MR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Microcontroller Type | 16-bit low-power microcontroller |
| CPU Performance | 16 MIPS |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 32 MHz |
| Program Memory | 64 KB ECC Flash |
| Program Memory Organization | 64K x 8 bits |
| Data Memory | 8 KB RAM |
| LCD Controller | Integrated segmented LCD controller |
| Low-Power Technology | nanoWatt XLP |
| Sleep Current | Down to a few hundreds of nA |
| প্যাকেজ | 64-QFN (9 x 9 mm) |
| পিন সংখ্যা | 64 pins |
| Architecture | PIC24F 16-bit |
| মাউন্টিং টাইপ | Surface mount |
PIC24FJ64GL306-I/MR 64-qfn (9 x 9 mm) পিন কনফিগারেশন গাইড
PIC24FJ64GL306-I/MR (64-qfn (9 x 9 mm) প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি PIC24FJ64GL306-I/MR.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
PIC24FJ64GL306-I/MR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Low-Power Digital Thermometer, Utility Metering and Display, Small Appliance Control Panel, Battery-Powered Sensor Monitor, Industrial Human-Machine Interface, Portable Pump or Valve Controller.
Low-Power Digital Thermometer
The PIC24FJ64GL306-I/MR fits a low-power digital thermometer because its integrated segmented LCD controller can drive the display while the 16-bit core performs conversion control, calibration, and temperature filtering. With 64 KB of ECC Flash and 8 KB of RAM, the MCU can hold display tables, calibration coefficients, alarm thresholds, and acquisition logic in one device. Sleep current down to a few hundreds of nA supports long intervals between readings without adding a separate low-power controller. The 64-pin QFN also leaves enough I/O for a temperature sensor interface and buttons. Verify the sensor voltage and the display segment count before finalizing the schematic.
সুপারিশকৃত
Utility Metering and Display
A compact utility meter benefits from the PIC24FJ64GL306-I/MR's combination of a 16 MIPS-rated 16-bit core, 64 KB ECC Flash, and an integrated LCD controller. The processor can run measurement acquisition, data filtering, tariff logic, and display updates while the low-power architecture supports standby operation. ECC Flash adds program-data integrity for long-life metering equipment, and the 8 KB RAM is sufficient for buffers and display working state. The 64-pin QFN provides a high pin count for LCD segments, meter sensors, and communication lines. Confirm the required LCD segment count and pin multiplexing in the manufacturer pin table.
সুপারিশকৃত
Small Appliance Control Panel
The PIC24FJ64GL306-I/MR is suitable for a small appliance control panel where an integrated display, touch inputs, motor control, and low standby demand share one board. Its 16-bit architecture at a 16 MIPS rating provides headroom for debouncing, display animation, fault handling, and real-time control routines. The 64 KB ECC Flash supports application firmware and parameter storage, while 8 KB of RAM can hold display buffers and control state. NanoWatt XLP characteristics and sleep current down to a few hundreds of nA help reduce standby consumption when the panel is inactive. The 64-pin QFN provides sufficient connections for a keypad matrix, LCD, and actuator outputs.
সুপারিশকৃত
Battery-Powered Sensor Monitor
A battery-powered sensor monitor can use the PIC24FJ64GL306-I/MR to periodically acquire measurements, update a local LCD, and return to a low-power state. The sleep-current capability of down to a few hundreds of nA is particularly valuable when the monitor wakes only at programmed intervals. The 64-bit Flash and RAM resources allow calibration data, thresholds, and display formatting to remain resident without external memory. Its integrated segmented LCD controller also reduces the need for a separate display driver. The actual run time depends on active current, sensor conversion time, regulator quiescent current, and LCD loading, so size the battery using the complete system power budget.
সুপারিশকৃত
Industrial Human-Machine Interface
The PIC24FJ64GL306-I/MR is well matched to an industrial HMI built around a segmented LCD, local buttons, status LEDs, and a simple sensor bus. The 16 MIPS-rated core can manage display updates, operator input, diagnostics, and communication routines, while the 64 KB ECC Flash provides protected program storage for production-line firmware. The 64-pin QFN package offers ample pins for LCD drive lines and control signals. The industrial temperature designation supports designs intended for extended commercial environments, although the exact operating limits and voltage requirements must be confirmed in the manufacturer documentation. The low-power architecture also benefits installations where the display remains active only when needed.
সুপারিশকৃত
Portable Pump or Valve Controller
The PIC24FJ64GL306-I/MR can serve as the control hub in a portable pump or valve system that needs a local display, status feedback, and timed actuation. Its timer-intensive 16-bit architecture supports deterministic control loops, while 64 KB of ECC Flash stores firmware, lookup tables, and operating profiles. The 8 KB RAM supports state history and communication buffering, and the segmented LCD controller simplifies the human-machine interface. Low sleep current is valuable when the controller is battery powered and wakes to check a sensor or service a timed task. Validate actuator drive voltage, isolation requirements, and the device operating voltage because the MCU should not directly power high-energy loads.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা PIC24FJ64GL306-I/MR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | PIC24FJ64GL306-E/MR | PIC24FJ64GL305-I/MR | PIC24FJ64GL304-I/MR |
|---|---|---|---|---|
| Brand | Microchip Technology | Microchip Technology | Microchip Technology | Microchip Technology |
| Package | 64-QFN (9 x 9 mm) | 64-QFN (9 x 9 mm) - same footprint | 64-QFN (9 x 9 mm) - same footprint | 64-QFN (9 x 9 mm) - same footprint |
| Architecture | 16-bit PIC24F | 16-bit PIC24F | 16-bit PIC24F | 16-bit PIC24F |
| LCD Controller | Integrated segmented LCD controller | Integrated segmented LCD controller | PIC24FJ GL family LCD function | PIC24FJ GL family LCD function |
| Low-Power Feature | nanoWatt XLP; sleep current down to a few hundreds of nA | PIC24FJ64GL306 low-power architecture | PIC24FJ GL low-power family | PIC24FJ GL low-power family |
| Temperature Designation | I - industrial grade | E - extended-temperature grade | I - industrial grade | I - industrial grade |
মূল পার্থক্যসমূহ
- Closest same-device temperature-grade option (বনামPIC24FJ64GL306-E/MR)
- Broader GL306 peripheral selection than reduced same-family variants (বনামPIC24FJ64GL305-I/MR)
- Highest memory and performance fit for the PIC24FJ64GL306 family (বনামPIC24FJ64GL304-I/MR)
- Integrated segmented LCD controller reduces auxiliary circuitry (বনামPIC24FJ64GL304-I/MR)
ডিজাইন নোট
Follow the manufacturer QFN land pattern exactly, including the exposed thermal pad, paste distribution, and solder-mask clearance. The 64-pin package places LCD and general-purpose signals around the perimeter while the exposed pad requires a thermal and electrical connection to the ground plane. Verify pin 1 orientation against the package drawing before releasing artwork.
Calculate the complete power budget from active current, idle current, wake frequency, LCD loading, and external regulator losses. The MCU can remain in a low-power state between measurement or display updates, but the LCD, pull networks, sensors, and voltage regulator can dominate the system budget. Decouple each supply pin according to the manufacturer layout and grounding guidance rather than relying on a single bulk capacitor.
Route LCD segment and common drive lines away from sensitive analog inputs and communication lines because fast-changing display signals can capacitively couple into adjacent nets. Keep the LCD connector and its drive traces physically separated from clock, sensor, and programming nets. Multiplexed functions also require a firmware review so each pin is assigned a mode that does not create a board-level conflict.
Do not substitute a device solely because it uses a 64-pin QFN package. Confirm the exact LCD segment requirements, peripheral set, operating voltage, temperature grade, programming interface, and pin multiplexing before replacing the PIC24FJ64GL306-I/MR. A GL306, GL305, or GL304 can share the footprint while providing different resources, so a mechanical fit alone does not establish functional drop-in compatibility.
কমপ্লায়েন্স তথ্য
The manufacturer product page and distributor listings confirm the device family and package, but no explicit RoHS, REACH, halogen-free, or conflict-minerals statement was included in the retrieved listings. AEC-Q100 does not apply to this general-purpose microcontroller.