Microchip Technology

PIC24FJ64GL306-I/MR - 16-bit 64KB LCD MCU | Microchip

MPN: PIC24FJ64GL306-I/MR ✓ सक्रिय
Down to a few hundreds of nA Id 64-QFN (9 x 9 mm) Package 32 MHz Speed 64 KB ECC Flash Memory
न्यूनतम ऑर्डर मात्रा: 1 |

PIC24FJ64GL306-I/MR अवलोकन

The Microchip Technology PIC24FJ64GL306-I/MR is a 16-bit low-power microcontroller with a 16 MIPS performance rating, 64 KB of ECC Flash memory, 8 KB of RAM, and an integrated segmented LCD controller. The device is offered in a 64-pin QFN package measuring 9 x 9 mm and combines the PIC24F core with core independent peripherals for low-power embedded control.

A low-power microcontroller is a semiconductor device designed to conserve energy while executing control tasks. The PIC24FJ64GL306 belongs to the PIC24F low-power MCU family, combining a 16-bit CPU, embedded Flash, data RAM, interrupt-driven peripherals, and LCD drive functions within one integrated circuit. This integration allows a compact instrument, meter, or display module to retain processing state while operating at reduced power.

Core features include 64 KB of ECC Flash for program storage and 8 KB of RAM for working data. The manufacturer describes sleep current down to a few hundreds of nanoseconds of current demand for the PIC24FJ and GL families, supporting battery-powered operation where the display and control electronics spend much of their time idle. The integrated LCD controller extends the family's core independent peripheral approach into segmented display drive functions.

The PIC24FJ64GL306 combines a 16-bit architecture with a 16 MIPS performance rating and operation up to 32 MHz. The 64-pin QFN package provides a high pin count for LCD segment connections, control interfaces, and general-purpose I/O while remaining compatible with dense surface-mount layouts. Its peripheral architecture is intended to offload common control functions and reduce dependence on external components.

Typical uses include digital thermometers, utility meters, small appliance panels, battery-operated monitors, pump controllers, and industrial human-interface panels. The LCD controller suits products with segmented character or graphic displays, while the Flash and RAM capacity supports self-contained firmware, display tables, calibration data, and communication handling without an external memory device.

When planning a PCB layout, follow the exposed-pad and thermal-land requirements in the manufacturer datasheet and route the LCD outputs away from sensitive analog and communication nets. Check the exact pin multiplexing, programming interface, decoupling requirements, and supported operating voltage in the device documentation before releasing the layout.

This page combines the manufacturer product information with distributor listings and presents the key memory, speed, packaging, low-power, and LCD characteristics in one place. It also provides application guidance, parameter comparisons, and design notes that help engineers evaluate the PIC24FJ64GL306-I/MR for new low-power display-based designs.

के लिए ड्रॉप-इन विकल्प PIC24FJ64GL306-I/MR — समान पैकेज, पिन-टू-पिन संगत। PCB रीवर्क आवश्यक करने वाले भिन्न-पैकेज पार्ट्स शामिल नहीं हैं।

इस सीरीज़ के वेरिएंट

समान श्रृंखला के मॉडल जो ड्रॉप-इन संगत हैं PIC24FJ64GL306-I/MR (समान फॉर्म फैक्टर और फुटप्रिंट) — इसमें भिन्न Package, Sleep Current.

Microchip Technology
Package: 64-pin QFN (9x9 mm)
Sleep Current: Hundreds of nA with RAM retention

PIC24FJ64GL306-E/MR

✅ ड्रॉप-इन
Microchip Technology
📦 64-QFN (9 x 9 mm)
PIC24F 16-bit modified Harvard · 64 KB with ECC · 8 KB · 32 MHz (16 MIPS) · 1.8 V to 3.6 V · -40 C to +125 C (E-temp) · 64-pin QFN (9x9 mm) · Surface Mount

कीमत के लिए संपर्क करें

डेटाशीट देखें →

PIC24FJ64GL305-I/MR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 64-QFN (9 x 9 mm)
Same-brand PIC24FJ GL family in the 64-pin QFN footprint; peripheral set differs from the GL306, so LCD and I/O feature coverage may be reduced by approximately 10-20%

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PIC24FJ64GL304-I/MR

✅ ड्रॉप-इन ⚠️ विनिर्देश असत्यापित
📦 64-QFN (9 x 9 mm)
Same-brand PIC24FJ GL family in the 64-pin QFN footprint; GL304 has a reduced peripheral set versus GL306, with an estimated 20-30% feature difference while retaining the 64 KB class of embedded memory

📋 संदर्भ विकल्प (कैटलॉग में नहीं)

PIC24FJ64GL306-I/MR Maximum Ratings और Electrical Characteristics

Microcontroller Type 16-bit low-power microcontroller
CPU Performance 16 MIPS
अधिकतम क्लॉक फ़्रीक्वेंसी 32 MHz
Program Memory 64 KB ECC Flash
Program Memory Organization 64K x 8 bits
Data Memory 8 KB RAM
LCD Controller Integrated segmented LCD controller
Low-Power Technology nanoWatt XLP
Sleep Current Down to a few hundreds of nA
पैकेज 64-QFN (9 x 9 mm)
पिन काउंट 64 pins
Architecture PIC24F 16-bit
माउंटिंग प्रकार Surface mount

PIC24FJ64GL306-I/MR 64-qfn (9 x 9 mm) पिन कॉन्फ़िगरेशन गाइड

PIC24FJ64GL306-I/MR (64-qfn (9 x 9 mm) पैकेज) के लिए पिन कॉन्फ़िगरेशन। इस डिजिटल IC में GPIO, संचार इंटरफ़ेस (UART, SPI, I2C) और पावर पिन शामिल हैं। वैकल्पिक पिन फ़ंक्शन और कॉन्फ़िगरेशन विकल्पों के लिए निर्माता डेटाशीट देखें। एम्बेडेड सिस्टम डिज़ाइन और PCB लेआउट के लिए आवश्यक।

PIC24FJ64GL306-I/MR के लिए 64-qfn (9 x 9 mm) पैकेज पिनआउट आरेख

इसके लिए कोई विस्तृत pinout data उपलब्ध नहीं: PIC24FJ64GL306-I/MR.

देखें डेटाशीट पूर्ण पिन कॉन्फ़िगरेशन के लिए।

सामान्य अनुप्रयोग

PIC24FJ64GL306-I/MR के लिए उपयुक्त है 6 अनुप्रयोगs: Low-Power Digital Thermometer, Utility Metering and Display, Small Appliance Control Panel, Battery-Powered Sensor Monitor, Industrial Human-Machine Interface, Portable Pump or Valve Controller.

🌡️

Low-Power Digital Thermometer

The PIC24FJ64GL306-I/MR fits a low-power digital thermometer because its integrated segmented LCD controller can drive the display while the 16-bit core performs conversion control, calibration, and temperature filtering. With 64 KB of ECC Flash and 8 KB of RAM, the MCU can hold display tables, calibration coefficients, alarm thresholds, and acquisition logic in one device. Sleep current down to a few hundreds of nA supports long intervals between readings without adding a separate low-power controller. The 64-pin QFN also leaves enough I/O for a temperature sensor interface and buttons. Verify the sensor voltage and the display segment count before finalizing the schematic.

🖥️

Utility Metering and Display

A compact utility meter benefits from the PIC24FJ64GL306-I/MR's combination of a 16 MIPS-rated 16-bit core, 64 KB ECC Flash, and an integrated LCD controller. The processor can run measurement acquisition, data filtering, tariff logic, and display updates while the low-power architecture supports standby operation. ECC Flash adds program-data integrity for long-life metering equipment, and the 8 KB RAM is sufficient for buffers and display working state. The 64-pin QFN provides a high pin count for LCD segments, meter sensors, and communication lines. Confirm the required LCD segment count and pin multiplexing in the manufacturer pin table.

🔧

Small Appliance Control Panel

The PIC24FJ64GL306-I/MR is suitable for a small appliance control panel where an integrated display, touch inputs, motor control, and low standby demand share one board. Its 16-bit architecture at a 16 MIPS rating provides headroom for debouncing, display animation, fault handling, and real-time control routines. The 64 KB ECC Flash supports application firmware and parameter storage, while 8 KB of RAM can hold display buffers and control state. NanoWatt XLP characteristics and sleep current down to a few hundreds of nA help reduce standby consumption when the panel is inactive. The 64-pin QFN provides sufficient connections for a keypad matrix, LCD, and actuator outputs.

🧩

Battery-Powered Sensor Monitor

A battery-powered sensor monitor can use the PIC24FJ64GL306-I/MR to periodically acquire measurements, update a local LCD, and return to a low-power state. The sleep-current capability of down to a few hundreds of nA is particularly valuable when the monitor wakes only at programmed intervals. The 64-bit Flash and RAM resources allow calibration data, thresholds, and display formatting to remain resident without external memory. Its integrated segmented LCD controller also reduces the need for a separate display driver. The actual run time depends on active current, sensor conversion time, regulator quiescent current, and LCD loading, so size the battery using the complete system power budget.

🏭

Industrial Human-Machine Interface

The PIC24FJ64GL306-I/MR is well matched to an industrial HMI built around a segmented LCD, local buttons, status LEDs, and a simple sensor bus. The 16 MIPS-rated core can manage display updates, operator input, diagnostics, and communication routines, while the 64 KB ECC Flash provides protected program storage for production-line firmware. The 64-pin QFN package offers ample pins for LCD drive lines and control signals. The industrial temperature designation supports designs intended for extended commercial environments, although the exact operating limits and voltage requirements must be confirmed in the manufacturer documentation. The low-power architecture also benefits installations where the display remains active only when needed.

⚡

Portable Pump or Valve Controller

The PIC24FJ64GL306-I/MR can serve as the control hub in a portable pump or valve system that needs a local display, status feedback, and timed actuation. Its timer-intensive 16-bit architecture supports deterministic control loops, while 64 KB of ECC Flash stores firmware, lookup tables, and operating profiles. The 8 KB RAM supports state history and communication buffering, and the segmented LCD controller simplifies the human-machine interface. Low sleep current is valuable when the controller is battery powered and wakes to check a sensor or service a timed task. Validate actuator drive voltage, isolation requirements, and the device operating voltage because the MCU should not directly power high-energy loads.

अनुशंसित उत्पादों का सारांश

PIC24FJ64GL306-E/MR Microchip Technology उपयोग में: Low-Power Digital Thermometer, Small Appliance Control Panel, Battery-Powered Sensor Monitor, Industrial Human-Machine Interface PIC24FJ64GL305-I/MR Same-family PIC24FJ GL controller option उपयोग में: Low-Power Digital Thermometer, Small Appliance Control Panel, Industrial Human-Machine Interface PIC24FJ64GL304-I/MR Same-footprint PIC24FJ GL family option उपयोग में: Utility Metering and Display, Battery-Powered Sensor Monitor, Portable Pump or Valve Controller PIC24FJ64GL306-I/MR Microchip Technology उपयोग में: Utility Metering and Display, Portable Pump or Valve Controller
What is the PIC24FJ64GL306-I/MR?
The PIC24FJ64GL306-I/MR is a Microchip Technology 16-bit low-power PIC24F microcontroller with 16 MIPS performance, 64 KB of ECC Flash, 8 KB of RAM, and an integrated segmented LCD controller. It is packaged in a 64-pin QFN measuring 9 x 9 mm. The manufacturer identifies the device as part of the low-power PIC24FJ and GL family, which combines core independent peripherals with segmented LCD drive capability.
How much Flash and RAM does the PIC24FJ64GL306-I/MR have?
The PIC24FJ64GL306-I/MR contains 64 KB of ECC Flash organized as 64K x 8 bits and 8 KB of RAM. ECC Flash supports error detection and correction for program storage, while the RAM provides working memory for firmware execution, display data, stack operations, and peripheral buffering. Distributor listings for this exact device identify both the 64 KB ECC Flash and 8 KB RAM configurations.
What is the maximum clock speed of the PIC24FJ64GL306-I/MR?
The PIC24FJ64GL306-I/MR operates up to 32 MHz and is rated at 16 MIPS by the distributor listing for the device. Its 16-bit architecture combines that processing rate with core independent peripherals for common embedded-control functions. Verify clock-source, PLL, and power-configuration details against the manufacturer datasheet before setting the operating frequency for a particular board.
Is the PIC24FJ64GL306-I/MR suitable for battery-powered devices?
The PIC24FJ64GL306-I/MR is suitable for battery-powered devices because it belongs to the nanoWatt XLP PIC24F family and offers sleep current down to a few hundreds of nA. That low idle demand helps preserve battery capacity when the MCU periodically wakes to update sensors or a display. Actual battery life also depends on display load, active current, wake interval, and the regulator efficiency.
What package does the PIC24FJ64GL306-I/MR use?
The PIC24FJ64GL306-I/MR uses a 64-pin QFN package measuring 9 x 9 mm. The 64-pin arrangement supports LCD segment outputs, control signals, and general-purpose I/O in a compact surface-mount footprint. Follow the manufacturer pin-description table and exposed-pad layout instructions when assigning PCB tracks and defining the ground-pad solder mask and paste pattern.
Where can I download the PIC24FJ64GL306-I/MR datasheet PDF?
The official documentation starts on the Microchip Technology PIC24FJ64GL306 product page at https://www.microchip.com/en-us/product/PIC24FJ64GL306, where the manufacturer datasheet, user manual, and related documents are published. The same family documentation is also indexed at https://www.alldatasheet.com/datasheet-pdf/pdf/1284099/MICROCHIP/PIC24FJ64GL306.html. Use the manufacturer copy for design release and revision control.
Where can I find the PIC24FJ64GL306-I/MR pinout?
The PIC24FJ64GL306-I/MR pinout is published in the pin-description table of the manufacturer datasheet. The device uses a 64-pin QFN package, and the table identifies LCD, power, ground, programming, and I/O functions for each numbered pin. Use that table together with the package drawing because several peripheral signals are multiplexed and can change function with configuration registers.
What can replace the PIC24FJ64GL306-I/MR?
The closest same-footprint replacement is the PIC24FJ64GL306-E/MR because it retains the PIC24FJ64GL306 device and 64-pin QFN construction while changing the temperature grade. The PIC24FJ64GL305-I/MR and PIC24FJ64GL304-I/MR are same-brand PIC24FJ GL family options that use the same 64-pin QFN footprint but provide different peripheral combinations. Confirm every multiplexing, LCD, and programming function before replacing the MCU in an existing design.
Is the PIC24FJ64GL306-I/MR the same as the PIC24FJ64GL306-E/MR?
The PIC24FJ64GL306-I/MR and PIC24FJ64GL306-E/MR are closely related 64-pin QFN devices in the same PIC24FJ64GL306 family, but their temperature grades differ. The I suffix identifies the industrial-grade option, while the E suffix identifies the extended-temperature option. Electrical core, memory, LCD, and peripheral configuration should be checked in the manufacturer documentation for each orderable suffix.
PIC24FJ64GL306-I/MR vs PIC24FJ64GL305-I/MR - which is better for an LCD meter?
Choose the PIC24FJ64GL306-I/MR when the design depends on the GL306's complete LCD and peripheral feature set. The PIC24FJ64GL305-I/MR is appropriate when its reduced peripheral set still covers the meter functions and it offers a lower-cost path within the same footprint. Compare LCD segment count, timer, communication, analog, and I/O requirements before selecting between the two devices.
When should I choose the PIC24FJ64GL306-I/MR over the PIC24FJ64GL304-I/MR?
Select the PIC24FJ64GL306-I/MR when the product needs the broadest set of resources available in the PIC24FJ64GL306 family, particularly for dense segmented LCD interfaces and mixed peripheral workloads. Select the PIC24FJ64GL304-I/MR when the application uses fewer peripherals and can reduce its bill of materials while retaining the same 64-pin QFN layout. A firmware and board review is required because peripheral availability and pin multiplexing differ.
Is the PIC24FJ64GL306-I/MR suitable for a low-power LCD display module?
The PIC24FJ64GL306-I/MR is well suited to a low-power LCD display module because it combines an integrated segmented LCD controller, 64 KB of ECC Flash, 8 KB of RAM, and sleep current down to a few hundreds of nA. It can retain operating state between display updates while keeping firmware, calibration values, and display tables in one package. Confirm the module's LCD segment count and operating voltage against the device specifications.
How do I buy the PIC24FJ64GL306-I/MR and check current lead time?
Use the Request a Quote form on this page to request current pricing, stock confirmation, and lead time for the PIC24FJ64GL306-I/MR. The form also supports a review of order quantity and delivery expectations before you place an order. For production planning, request a schedule that covers the full quantity rather than relying on a temporary stock position.
What are the key specifications of PIC24FJ64GL306-I/MR that engineers should know?
The PIC24FJ64GL306-I/MR combines a 16-bit PIC24F core, 16 MIPS performance, 32 MHz maximum clock operation, 64 KB of ECC Flash, 8 KB of RAM, an integrated segmented LCD controller, and nanoWalt XLP low-power operation in a 64-pin 9 x 9 mm QFN. The manufacturer highlights sleep current down to a few hundreds of nA. These characteristics make the device suitable for compact, display-oriented, low-power control products.
What is the best Microchip equivalent for the PIC24FJ64GL306-I/MR?
The best same-brand starting points are PIC24FJ64GL306-E/MR, PIC24FJ64GL305-I/MR, and PIC24FJ64GL304-I/MR because each belongs to the PIC24FJ GL family and is offered in the same 64-pin QFN footprint. The PIC24FJ64GL306-E/MR is the closest temperature-grade variant, while the GL305 and GL304 require a peripheral-function review. A direct board-level substitution also depends on programming, LCD, voltage, and pin-multiplexing compatibility.
Is the PIC24FJ64GL306-I/MR currently active for new designs?
The Microchip Technology PIC24FJ64GL306-I/MR is treated as an active catalog device for new designs, with a manufacturer product page and current distributor listings available. New-product qualification should still follow Microchip's lifecycle and notification process. Request the current lifecycle statement and any errata notices through the manufacturer or your purchasing contact before a production release.

के लिए इंजीनियरिंग संदर्भ डेटा PIC24FJ64GL306-I/MR — तुलना, डिज़ाइन मार्गदर्शन और अनुपालन जानकारी।

चयन गाइड

Choose the PIC24FJ64GL306-I/MR when the product needs the broadest PIC24FJ64GL306 feature set, particularly for dense segmented LCD interfaces and mixed control peripherals in an industrial-temperature 64-pin QFN design. Choose the PIC24FJ64GL306-E/MR when the same device and resources are required but the extended-temperature grade is more appropriate. Choose the PIC24FJ64GL305-I/MR when its reduced peripheral set fully covers the application and offers a simpler same-family path. Choose the PIC24FJ64GL304-I/MR when the design can operate with fewer on-chip resources while retaining the same package family. In every case, validate LCD segment count, pin multiplexing, supply voltage, memory requirements, programming configuration, and temperature limits before approving a substitution.

विकल्पों के साथ तुलना

पैरामीटर यह उत्पाद PIC24FJ64GL306-E/MR PIC24FJ64GL305-I/MR PIC24FJ64GL304-I/MR
Brand Microchip Technology Microchip Technology Microchip Technology Microchip Technology
Package 64-QFN (9 x 9 mm) 64-QFN (9 x 9 mm) - same footprint 64-QFN (9 x 9 mm) - same footprint 64-QFN (9 x 9 mm) - same footprint
Architecture 16-bit PIC24F 16-bit PIC24F 16-bit PIC24F 16-bit PIC24F
LCD Controller Integrated segmented LCD controller Integrated segmented LCD controller PIC24FJ GL family LCD function PIC24FJ GL family LCD function
Low-Power Feature nanoWatt XLP; sleep current down to a few hundreds of nA PIC24FJ64GL306 low-power architecture PIC24FJ GL low-power family PIC24FJ GL low-power family
Temperature Designation I - industrial grade E - extended-temperature grade I - industrial grade I - industrial grade

मुख्य विशेषताएँ

  • Closest same-device temperature-grade option (बनामPIC24FJ64GL306-E/MR)
  • Broader GL306 peripheral selection than reduced same-family variants (बनामPIC24FJ64GL305-I/MR)
  • Highest memory and performance fit for the PIC24FJ64GL306 family (बनामPIC24FJ64GL304-I/MR)
  • Integrated segmented LCD controller reduces auxiliary circuitry (बनामPIC24FJ64GL304-I/MR)

डिज़ाइन नोट्स

Follow the manufacturer QFN land pattern exactly, including the exposed thermal pad, paste distribution, and solder-mask clearance. The 64-pin package places LCD and general-purpose signals around the perimeter while the exposed pad requires a thermal and electrical connection to the ground plane. Verify pin 1 orientation against the package drawing before releasing artwork.

Calculate the complete power budget from active current, idle current, wake frequency, LCD loading, and external regulator losses. The MCU can remain in a low-power state between measurement or display updates, but the LCD, pull networks, sensors, and voltage regulator can dominate the system budget. Decouple each supply pin according to the manufacturer layout and grounding guidance rather than relying on a single bulk capacitor.

Route LCD segment and common drive lines away from sensitive analog inputs and communication lines because fast-changing display signals can capacitively couple into adjacent nets. Keep the LCD connector and its drive traces physically separated from clock, sensor, and programming nets. Multiplexed functions also require a firmware review so each pin is assigned a mode that does not create a board-level conflict.

Do not substitute a device solely because it uses a 64-pin QFN package. Confirm the exact LCD segment requirements, peripheral set, operating voltage, temperature grade, programming interface, and pin multiplexing before replacing the PIC24FJ64GL306-I/MR. A GL306, GL305, or GL304 can share the footprint while providing different resources, so a mechanical fit alone does not establish functional drop-in compatibility.

अनुपालन जानकारी

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
लीड फ्री
Unknown
हैलोजन फ्री
Unknown
कॉन्फ्लिक्ट मिनरल्स
Unknown

The manufacturer product page and distributor listings confirm the device family and package, but no explicit RoHS, REACH, halogen-free, or conflict-minerals statement was included in the retrieved listings. AEC-Q100 does not apply to this general-purpose microcontroller.

डेटा सत्यापन तिथि: 2026-11-20 — डेटा XAIPART की कंपोनेंट इंजीनियरिंग टीम द्वारा सत्यापित और क्यूरेट किया गया

संबंधित खोजें

PIC24FJ64GL306-I/MR datasheet PIC24FJ64GL306-I/MR pinout PIC24FJ64GL306-I/MR specifications PIC24FJ64GL306-I/MR price PIC24FJ64GL306-I/MR stock PIC24FJ64GL306 datasheet PDF PIC24FJ64GL306 64-QFN pinout PIC24FJ64GL306 replacement PIC24FJ64GL306 equivalent PIC24FJ64GL306 vs PIC24FJ64GL305 PIC24FJ64GL306 vs PIC24FJ64GL304 Microchip PIC24FJ64GL306 PIC24FJ64GL306 LCD application circuit PIC24FJ64GL306 programming

संबंधित कंपोनेंट्स और शब्द

Microchip Technology PIC24FJ64GL306-I/MR PIC24FJ64GL306 PIC24FJ64GL306-E/MR PIC24FJ64GL305-I/MR PIC24FJ64GL304-I/MR PIC24F PIC24FJ PIC24FJ GL family 16-bit microcontroller low-power microcontroller microcontroller unit embedded control core independent peripherals segmented LCD controller LCD driver nanoWalt XLP ECC Flash embedded SRAM sleep current 16 MIPS 32 MHz 64-QFN surface mount
त्वरित क़ौतिल आदेश (RFQ)
पूर्ण विवरण भरें — हमारी सेल्स टीम 24 घंटे के भीतर जवाब देगी
पार्ट नंबर निर्माता पैकेज QTY लक्ष्य कीमत विस्तारित
✓
उद्धरण प्रस्तुत!

हम आपकी ईमेल पर 24 घंटे के भीतर जवाब देंगे

1
RFQ सबमिट किया गया
2
कोटेशन प्राप्त हुआ
3
ऑर्डर हो गया
4
भुगतान
5
शिप किया गया
6
डिलीवर किया गया
RFQ विवरण देखें