Texas Instruments

SN74HC393N - Dual 4-Bit Binary Counter | Texas Instruments

MPN: SN74HC393N ✓ সক্রিয়
14-PDIP Package Negative edge Speed
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

SN74HC393N সারাংশ

The Texas Instruments SN74HC393N is a dual 4-bit binary counter containing eight flip-flops and additional gating to implement two independent counters in one 14-pin PDIP package. Each counter provides four parallel outputs, a clock input, and a clear input, while the binary counting sequence is advanced on the negative edge of the clock. The device is designed for digital frequency division, event counting, timing generation, and sequential control applications.

A binary counter is a digital sequential-circuit component that stores an n-bit number and advances that number after each active clock transition. In the SN74HC393N, each 4-bit section can therefore represent 16 count states, while the two sections operate independently. Within the broader logic hierarchy, this product is a counter IC, a type of synchronous digital logic IC used to divide frequency, count repeated events, or establish predictable timing relationships in a circuit.

The SN74HC393N provides two independent 4-bit counting channels in one package, reducing board area compared with two separate single-counter devices. Its eight internal flip-flops and gating provide parallel outputs for every counting stage, allowing multiple submultiples of the input clock frequency to be observed. The negative-edge clocking behavior is important because each counter changes state on the falling transition rather than the rising transition of its clock waveform.

The two counting sections each include an individual clock and clear function, so they can be started and reset independently when separate event streams are required. This makes the device more flexible than a simple fixed-divider arrangement. Output states can also be decoded for modulus generation, while the clear inputs allow a count sequence to be returned to its starting state after a defined number of cycles. The manufacturer documentation identifies the SN74HC393 family as comprising two individual 4-bit binary counters.

Typical uses include divide-by-16 clock generation, digital time-base and timer modules, pulse and event counting, address sequencing, frequency division in communication equipment, and general control logic in industrial or embedded systems. Two independent sections allow one counter to handle a recurring timing reference while the other counts external events. Parallel outputs can be cascaded externally when a count range wider than four bits is required.

PCB design should preserve the counter's clock and clear signal paths, particularly when the device participates in a timing chain. Keep clock traces short, maintain a common ground reference, and route output signals away from high-current switching nodes. Because the part is supplied in a 14-pin PDIP package, lead spacing and drilled through-hole dimensions must match the PCB footprint. Confirm the pin assignments in the Texas Instruments datasheet before final routing.

This product page organizes the verified device identity, package information, operating function, drop-in alternatives, and design guidance into a compact engineering reference. It also highlights the difference between functional timing applications and a physical PCB replacement, helping engineers select a replacement only when both the logic behavior and 14-pin footprint are compatible.

এর জন্য ড্রপ-ইন বিকল্প SN74HC393N — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

SN74HC393NE4

✅ ড্রপ-ইন
📦 14-PDIP
Same SN74HC393 function and 14-pin PDIP package; orderable suffix and qualification details differ by 0% in the identified key parameters.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

74HC393N,652

✅ ড্রপ-ইন
📦 14-PDIP
Same dual 4-bit negative-edge counter function and 14-pin DIP package; manufacturer-specific electrical and qualification limits require comparison.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

MM74HC393N

✅ ড্রপ-ইন
📦 14-PDIP
Same HC393 dual 4-bit counter family in a 14-pin package; exact timing, temperature grade, and qualification differences require datasheet verification.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

HD74HC393P

✅ ড্রপ-ইন
📦 14-PDIP
Same dual 4-bit binary-counter architecture in a 14-pin package; device-specific voltage, timing, and qualification limits differ.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SN74HC393N সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Counter Type Binary counter
Number of Counter Elements 2 elements
Bits per Counter 4 bits
Clock Edge Negative edge
Total Flip-Flops 8 flip-flops
আউটপুট কনফিগারেশন 4 parallel outputs per counter
Independent Counter Sections 2
Clock Inputs 1 per counter
Clear Inputs 1 per counter
প্যাকেজ 14-PDIP
পিন সংখ্যা 14 pins
মাউন্টিং টাইপ Through-hole

SN74HC393N পিন কনফিগারেশন

DIP-14 Package Pinout Diagram DIP-14 14-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 14 2 13 3 12 4 11 5 10 6 9 7 8 DIP-14
পিন 1 CLR1 — Asynchronous clear input for counter 1
পিন 2 Q1A — Parallel output A of counter 1
পিন 3 Q1B — Parallel output B of counter 1
পিন 4 Q1C — Parallel output C of counter 1
পিন 5 Q1D — Parallel output D of counter 1
পিন 6 CLK1 — Negative-edge clock input for counter 1
পিন 7 GND — Ground reference
পিন 8 Q2A — Parallel output A of counter 2
পিন 9 Q2B — Parallel output B of counter 2
পিন 10 Q2C — Parallel output C of counter 2
পিন 11 Q2D — Parallel output D of counter 2
পিন 12 CLK2 — Negative-edge clock input for counter 2
পিন 13 CLR2 — Asynchronous clear input for counter 2
পিন 14 VCC — Positive supply voltage

সাধারণ ব্যবহার

SN74HC393N এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Binary Frequency Divider, Digital Event Counter, Timer and Time-Base Logic, Address and State Sequencing, Communication Timing and Pulse Counting, Test and Measurement Equipment.

🖥️

Binary Frequency Divider

The SN74HC393N suits digital frequency-divider and clock-generation circuits because each section counts on the negative edge and exposes four parallel outputs from its 4-bit counting stages. A 16-count sequence can be divided directly from one section, while the second section can provide another independent division ratio or event count. This arrangement reduces component count compared with using two separate counter packages. Before finalizing the timing chain, verify the maximum operating frequency, propagation delay, and output transition characteristics in the Texas Instruments datasheet for the selected supply voltage.

🏭

Digital Event Counter

Each independent counter section in the SN74HC393N can count recurring external events and retain the result in a 4-bit binary state. The package is useful in laboratory, industrial, and control systems where one channel counts cycles while the other tracks a separate event stream. The parallel outputs allow individual count states to be observed without repeatedly decoding the full binary value. Clear inputs support deterministic reset after a target count is reached, although the external input conditioning and maximum input frequency must be validated against the manufacturer's electrical characteristics.

⏱️

Timer and Time-Base Logic

The two independent 4-bit sections of the SN74HC393N can support timer intervals, elapsed-event timing, and system time-base generation. One negative-edge counter channel may establish a periodic interval while the other performs a secondary division or event-counting function. Its parallel count outputs provide several usable intermediate timing states, helping reduce the number of external decoding gates. For battery-powered or precision timing equipment, check the supported supply range, quiescent behavior, and timing tolerance in the manufacturer documentation before choosing the device.

🔧

Address and State Sequencing

The SN74HC393N can implement binary state sequencing in control logic because each 4-bit counter advances on a falling clock edge and exposes all four count states as parallel outputs. A second counter can maintain another state sequence, allowing two coordinated sequences to run from related or separate clocks. This is useful in test fixtures, programmable controllers, and sequencing logic where compact counter state is required. Account for setup and hold timing at the clock and clear inputs, and confirm that the counter polarity matches the state-machine requirements.

🌐

Communication Timing and Pulse Counting

The SN74HC393N can divide repetitive communication or synchronization pulses and count externally received events in a compact 14-pin package. Two independent sections allow a recovered timing signal to be divided while a separate channel counts message or frame events. Its negative-edge operation must be considered when the surrounding circuit already uses other logic on the falling transition. Check propagation delay and output timing margin against the system clock budget, and use the datasheet pin table to preserve the correct clear-input polarity.

📺

Test and Measurement Equipment

The SN74HC393N is useful as a compact binary counter in test and measurement equipment that must count test cycles, derive division ratios, or generate repeating timing intervals. Two independent channels provide flexibility for coordinating an instrument's timing with an event count. The parallel outputs can be routed to display, capture, or control circuitry without adding a separate multiplexer. Designers should compare the device's operating conditions and timing limits with the instrument's voltage, temperature, and clock requirements, and ensure unused inputs are connected according to the datasheet.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

74HC393N,652 Pin-compatible dual 4-bit counter alternative ব্যবহৃত হয়: Binary Frequency Divider, Timer and Time-Base Logic, Communication Timing and Pulse Counting, Test and Measurement Equipment MM74HC393N HC393-family counter alternative ব্যবহৃত হয়: Binary Frequency Divider, Timer and Time-Base Logic, Communication Timing and Pulse Counting SN74HC393NE4 Same-manufacturer orderable counterpart ব্যবহৃত হয়: Digital Event Counter, Address and State Sequencing, Test and Measurement Equipment HD74HC393P Same-family dual counter alternative ব্যবহৃত হয়: Digital Event Counter, Address and State Sequencing
What is the SN74HC393N?
The SN74HC393N is a Texas Instruments dual 4-bit binary counter in a 14-pin PDIP package. According to the Texas Instruments product documentation, the device contains eight flip-flops and gating that implement two independent 4-bit counters. Each section includes a clock input, a clear input, and four parallel binary outputs, making the IC useful for frequency division, event counting, timing, and control logic.
What is the operating voltage of SN74HC393N?
The SN74HC393N is a member of the SN74HC logic family, but its exact operating-voltage limits must be taken from the manufacturer datasheet for the specific orderable grade. The verified product information confirms the dual 4-bit counter function and 14-PDIP package. Use the datasheet's recommended operating conditions before designing a rail-to-rail interface or selecting pull-up and level-shifting components.
Does SN74HC393N count on the rising or falling clock edge?
The SN74HC393N counts on the negative, or falling, edge of each clock input. Texas Instruments describes the device as a dual 4-bit binary counter with negative-edge operation. In a synchronous design, connect each clock to the same source when both counters must advance together; otherwise, separate clock signals allow the two counting sections to operate independently.
How many independent counters are in the SN74HC393N?
The SN74HC393N contains two independent 4-bit binary counters. According to the manufacturer datasheet, eight flip-flops and additional gating form the two counter sections in one package. Each counter has four parallel outputs plus its own clock and clear input, so the sections can count separate event streams or be synchronized to a common clock.
Where can I download the SN74HC393N datasheet PDF?
The official SN74HC393N datasheet can be obtained from the Texas Instruments product page at https://www.ti.com/product/SN74HC393 or directly through the manufacturer datasheet link https://www.ti.com/lit/gpn/SN74HC393. These documents provide the authoritative pin descriptions, electrical characteristics, recommended operating conditions, and package information needed for schematic capture and PCB layout.
Where is the SN74HC393N pinout located?
The SN74HC393N pinout is shown in the Texas Instruments SN74HC393 datasheet. The 14-pin PDIP package contains two independent counter sections, with each section using one clock, one clear, and four outputs. Assign PCB nets from the pin-description table rather than relying only on the package drawing, particularly for the ground and supply pins.
What can replace the SN74HC393N?
A true drop-in replacement must implement two independent 4-bit negative-edge counters and retain the same 14-pin PDIP pinout. The 74HC393N from NXP is a directly comparable 14-DIP option, while MM74HC393N and HD74HC393P appear in manufacturer comparisons of the same counter family. Verify active-low or active-high clear polarity, clock-edge behavior, supply limits, and timing before approving any substitution.
Is 74HC393N,652 the same as SN74HC393N?
The NXP 74HC393N,652 and Texas Instruments SN74HC393N are presented as dual 4-bit binary counters with negative-edge counting in 14-pin through-hole packages. They are functionally comparable, but qualification details, lifecycle status, temperature grades, and electrical limits may differ. Confirm the NXP datasheet and your production requirements before treating it as a drop-in replacement.
What is the best NXP equivalent for SN74HC393N?
The NXP 74HC393N,652 is the closest identified NXP equivalent because it is listed as a dual 4-bit, negative-edge binary counter in a 14-DIP package. A PCB-level substitution still requires confirmation of pin functions, clear polarity, supply-voltage range, timing, and environmental qualification. Use the Request a Quote form on this page when sourcing the exact orderable part.
When should I choose SN74HC393N over a 74HC390-family counter?
Choose the SN74HC393N when the design needs two independent 4-bit binary counting channels, each with four parallel outputs and a negative-edge clock. A 74HC390-family device is not automatically interchangeable because its decade/divide-by-5 counter arrangement and pin functions differ. Verify the counter modulus, output arrangement, clock edge, and PCB footprint before choosing an alternative.
Is SN74HC393N suitable for frequency division and timing applications?
Yes, the SN74HC393N is suitable for 4-bit frequency division, binary event counting, timing generation, and sequential control. Its four parallel outputs per section make several count states accessible simultaneously, and its negative-edge clock behavior permits deterministic advancement on a falling transition. Use the manufacturer timing limits to verify the maximum operating frequency for the selected logic level.
Where can I buy SN74HC393N online?
The SN74HC393N can be requested through the Request a Quote form on this page, which is the appropriate route for current commercial availability, order quantities, and lead-time confirmation. The manufacturer lists the SN74HC393 family as an active dual 4-bit binary-counter product. Provide the required quantity and grade when submitting the request.
What is the price of SN74HC393N?
Use the Request a Quote form on this page for the current SN74HC393N price and quantity-break terms. Pricing depends on order quantity, availability, package suffix, and required grade, so a static figure can become stale or represent the wrong orderable variant. Include your production quantity and target date in the request for an actionable quotation.
What is the lead time and stock status for SN74HC393N?
Current lead time, minimum order quantity, and stock status should be confirmed through the Request a Quote form on this page. Texas Instruments lists the SN74HC393 family as active, but production planning still requires a quotation against the exact package suffix and required quantity. Request the current delivery schedule before committing the component to a build.
What are the key specifications of SN74HC393N that engineers should know?
The key engineering facts are two independent 4-bit binary counters, eight internal flip-flops, negative-edge clocking, four parallel outputs per counter, independent clock and clear inputs, and a 14-PDIP package. According to the Texas Instruments product documentation, this arrangement supports binary frequency division, event counting, and timing logic. Supply limits, propagation delay, and temperature ratings should be selected from the manufacturer datasheet.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SN74HC393N — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the SN74HC393N when the design requires two independent 4-bit binary counters with four parallel outputs per channel, separate clock and clear inputs, and negative-edge counting in a 14-pin PDIP footprint. SN74HC393NE4 is the closest same-manufacturer option when its orderable suffix and qualification details match the production requirement. For a second source, evaluate 74HC393N,652 from NXP, MM74HC393N from onsemi, or HD74HC393P from Renesas only after comparing supply voltage, propagation timing, clear polarity, temperature rating, and qualification. These identified alternatives preserve the core dual 4-bit counter function and 14-pin through-hole format, but manufacturer-specific limits may still affect the choice. Do not substitute a 74HC390-family counter merely because it also has 14 pins; its counting modulus and output arrangement are different. For new designs, confirm the 14-pin PDIP footprint, supply conditions, clock budget, and input states directly against the manufacturer datasheet.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য SN74HC393NE4 74HC393N,652 MM74HC393N HD74HC393P
Brand Texas Instruments Texas Instruments NXP Semiconductors onsemi Renesas Electronics
Package 14-PDIP 14-PDIP 14-DIP 14-PDIP 14-PDIP
Counter Type Binary counter Binary counter Binary counter Binary counter Binary counter
Counter Elements 2 elements 2 elements 2 elements 2 elements 2 elements
Counter Width 4 bits 4 bits 4 bits 4 bits 4 bits
Clock Edge Negative edge Negative edge Negative edge Negative edge Negative edge
Internal Flip-Flops 8 flip-flops 8 flip-flops 8 flip-flops 8 flip-flops 8 flip-flops

মূল পার্থক্যসমূহ

  • Two independent counters in one package (বনাম74HC393N,652)
  • Parallel access to every counter stage (বনামMM74HC393N)
  • Negative-edge counting supports deterministic clocking (বনামHD74HC393P)
  • Single-package channel consolidation (বনামCD74HC4520E)

ডিজাইন নোট

Treat each clock input as a timing-sensitive node. Route it directly to the intended counter pin, keep the path short, and avoid sharing a long trace with unrelated outputs where switching activity could create crosstalk. Because the counters advance on the falling edge, check source timing, propagation delay, and setup or hold requirements against the system clock budget using the manufacturer timing characteristics.

Confirm that the PCB footprint matches a 14-pin PDIP rather than a 14-pin surface-mount package. Check row spacing, lead length, drill diameter, and pin-1 orientation before layout release. Keep ground and supply connections short, use a common ground reference, and decouple the supply close to the device in accordance with the manufacturer layout guidance. Verify every net against the datasheet pin-description table.

Do not substitute a 74HC390-family counter merely because both devices use a 14-pin package; decade-counter outputs, count modulus, and pin assignments differ. Likewise, verify clear-input polarity and clock-edge behavior for every proposed replacement. A physical package match is necessary but insufficient: the logical function, supply limits, timing, temperature range, and qualification requirements must also satisfy the design.

When the two counters operate from one clock, route the source so both channels receive equivalent propagation delay. If the counters use separate clocks, maintain independent return paths and avoid long ground loops. The four parallel outputs of each channel can be routed as a binary bus or decoded individually; fanout and trace loading should be checked against the output-current and timing specifications before adding excessive loading.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

The verified product information does not state the requested compliance attributes. AEC-Q100 is recorded as not applicable because this is a general-purpose logic counter rather than an automotive-qualified device.

ডেটা যাচাই করা হয়েছে: 2026-11-18 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

sn74hc393n datasheet SN74HC393N datasheet pdf SN74HC393N pinout SN74HC393N equivalent SN74HC393N replacement SN74HC393N drop-in replacement SN74HC393N price SN74HC393N stock Texas Instruments SN74HC393N SN74HC393N 14-PDIP footprint SN74HC393N vs 74HC393N,652 SN74HC393N negative edge counter SN74HC393N frequency divider SN74HC393N application circuit

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments SN74HC393N SN74HC393NE4 74HC393N,652 MM74HC393N HD74HC393P NXP Semiconductors onsemi Renesas Electronics dual 4-bit binary counter counter IC digital logic IC flip-flop negative-edge clock parallel output frequency divider event counter binary sequencing 14-PDIP DIP package through-hole mounting clear input RoHS REACH
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন