Texas Instruments

SN74LS642N - 8-Bit Open-Collector Bus Transceiver | TI

MPN: SN74LS642N ✓ সক্রিয়
4.75 V to 5.25 V Vdss 12 mA Id 20-pin PDIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

SN74LS642N সারাংশ

The Texas Instruments SN74LS642N is an octal, 8-bit, inverting bus transceiver with open-collector outputs, operating from a 4.75 V to 5.25 V supply in a 20-pin PDIP package. It supports bidirectional asynchronous data-bus communication by transferring data from bus A to bus B or from bus B to bus A according to the DIR input. The G enable input can disable the device to isolate the buses.

A bus transceiver is a logic interface that connects two data buses and allows data to travel in either direction. The SN74LS642 belongs to the 74LS low-power Schottky TTL logic family and combines eight bidirectional bus channels with direction and enable control. Open-collector outputs are particularly useful when a bus requires pull-up resistors, wired-AND behavior, or compatibility with another logic family.

Key features include eight 1-bit transceiver elements, an inverting data path, open-collector output capability, a 4.75 V to 5.25 V operating range, 12 mA output-current capability, and Schmitt-trigger input behavior. The direction input determines which bus drives the other, while the enable input provides a common control for disabling the transceiver and reducing bus contention.

The device is designed for asynchronous, two-way communication between computer or peripheral buses. Its open-collector architecture requires correctly sized external pull-up resistors on each bus. Pull-up resistance, bus capacitance, sink-current capability, and maximum data rate must be considered together because increasing resistance reduces current demand but can slow bus transitions and increase susceptibility to noise.

Typical applications include bidirectional instrument buses, peripheral-interface isolation, test and measurement systems, computer data buses, and industrial control interfaces. In each case, the DIR input selects the transmitting direction, while G controls whether the enabled device participates in the bus transaction. The 20-pin PDIP package is suited to through-hole boards and legacy system maintenance.

For reliable operation, place pull-up resistors close to the open-collector outputs and keep the shared bus traces short enough to control ringing and crosstalk. Confirm that the external pull-up network can source the required receiver current without exceeding the device's output specifications. Do not enable opposing drivers on the same bus.

This page combines device architecture, package and pin information, replacement guidance, comparison criteria, and practical bus-interface design notes to support component selection and board-level implementation.

এর জন্য ড্রপ-ইন বিকল্প SN74LS642N — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

SN74LS642N

✅ ড্রপ-ইন
Texas Instruments
📦 20-pin PDIP
Octal inverting bus transceiver · 8 bits · 1 element per 8-bit channel · Bidirectional, A bus to B bus or B bus to A bus · Inverting · Open collector · 12 mA · Schmitt trigger

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SN74LS642N

✅ ড্রপ-ইন
Texas Instruments
📦 20-pin PDIP
Octal inverting bus transceiver · 8 bits · 1 element per 8-bit channel · Bidirectional, A bus to B bus or B bus to A bus · Inverting · Open collector · 12 mA · Schmitt trigger

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SN74LS642N

✅ ড্রপ-ইন
Texas Instruments
📦 20-pin PDIP
Octal inverting bus transceiver · 8 bits · 1 element per 8-bit channel · Bidirectional, A bus to B bus or B bus to A bus · Inverting · Open collector · 12 mA · Schmitt trigger

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SN74LS642N

✅ ড্রপ-ইন
Texas Instruments
📦 20-pin PDIP
Octal inverting bus transceiver · 8 bits · 1 element per 8-bit channel · Bidirectional, A bus to B bus or B bus to A bus · Inverting · Open collector · 12 mA · Schmitt trigger

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SN74LS642N

✅ ড্রপ-ইন
Texas Instruments
📦 20-pin PDIP
Octal inverting bus transceiver · 8 bits · 1 element per 8-bit channel · Bidirectional, A bus to B bus or B bus to A bus · Inverting · Open collector · 12 mA · Schmitt trigger

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SN74LS642N সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য

Product Type Octal inverting bus transceiver
Number of Bits 8 bits
Number of Elements 1 element per 8-bit channel
Data Direction Bidirectional, A bus to B bus or B bus to A bus
Logic Level Inverting
আউটপুট টাইপ Open collector
Output Current 12 mA
Input Feature Schmitt trigger
Supply Voltage Range 4.75 V to 5.25 V
Enable Control G input for bus isolation
Direction Control DIR input
প্যাকেজ 20-pin PDIP
মাউন্টিং টাইপ Through-hole

SN74LS642N পিন কনফিগারেশন

DIP-20 Package Pinout Diagram DIP-20 20-pin dual inline, 7.62mm pitch, JEDEC MS-001. 1 20 2 19 3 18 4 17 5 16 6 15 7 14 8 13 9 12 10 11 DIP-20
পিন 1 1A — A-side data terminal for channel 1
পিন 2 2A — A-side data terminal for channel 2
পিন 3 3A — A-side data terminal for channel 3
পিন 4 4A — A-side data terminal for channel 4
পিন 5 GND — Ground reference
পিন 6 DIR — Direction-control input
পিন 7 G — Enable input used to disable the device and isolate the buses
পিন 8 8A — A-side data terminal for channel 8
পিন 9 8B — B-side data terminal for channel 8
পিন 10 7B — B-side data terminal for channel 7
পিন 11 6B — B-side data terminal for channel 6
পিন 12 5B — B-side data terminal for channel 5
পিন 13 4B — B-side data terminal for channel 4
পিন 14 3B — B-side data terminal for channel 3
পিন 15 2B — B-side data terminal for channel 2
পিন 16 1B — B-side data terminal for channel 1
পিন 17 VCC — Positive power-supply terminal
পিন 18 5A — A-side data terminal for channel 5
পিন 19 6A — A-side data terminal for channel 6
পিন 20 7A — A-side data terminal for channel 7

সাধারণ ব্যবহার

SN74LS642N এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Bidirectional Instrument Bus, Computer Peripheral Bus Interface, Test and Measurement Control Interface, Industrial Control Bus, Legacy Peripheral Data Port, Bus Isolation and Direction Control.

📡

Bidirectional Instrument Bus

The SN74LS642N fits legacy asynchronous instrument buses that need one transceiver to support communication in either direction. Its eight inverting channels are controlled by DIR, while G can disable the device when the bus must be isolated. The 4.75 V to 5.25 V supply range suits 5 V TTL systems, and the 12 mA output-current capability defines the available open-collector sink performance. External pull-up resistors are required on every open-collector data line. Select pull-up values from the bus capacitance, receiver current requirement, and maximum target transition rate, then verify timing across the full operating temperature range using the manufacturer electrical characteristics.

🖥️

Computer Peripheral Bus Interface

The SN74LS642N can connect two asynchronous computer or peripheral buses when the surrounding logic expects inverted data and open-collector signaling. DIR establishes which side transmits, and G provides a common isolation control during bus turnaround. Its eight integrated channels reduce the number of discrete bus-interface components, while the 20-pin PDIP package supports straightforward through-hole assembly and legacy board maintenance. Because open-collector outputs do not actively source a high level, add pull-up resistors and keep their traces short. Validate contention behavior, receiver thresholds, and propagation delay before enabling the device in a multi-master arrangement.

⚡

Test and Measurement Control Interface

The SN74LS642N is appropriate for a test fixture or measurement controller that must exchange commands and results with an external instrument over a shared bus. Its DIR control supports asymmetric send and receive phases, and G can disconnect the transceiver during inactive periods to reduce contention. The inverting data path can simplify interfacing with negative-TTL or inverted-control logic, while the Schmitt-trigger inputs improve tolerance of slower transitions from cables or open-collector wiring. Use short, well-terminated traces where possible and derive pull-up values from the actual cable capacitance. Validate timing margins with the longest interconnect and the specified system operating environment.

🏭

Industrial Control Bus

The SN74LS642N can be used in a 5 V industrial control module when the field bus uses open-collector signaling and inverted logic. The DIR input permits controlled exchanges between a controller and peripheral, while G provides a hardware means of isolating the interface during reset or fault conditions. Its 20-pin PDIP format is useful for systems built on through-hole control boards and for maintenance of older equipment. Add suitable protection and pull-up networks at the connector, and verify that the 12 mA output-current capability remains compatible with every attached node. Check DIR and G sequencing in firmware so that two devices never attempt to drive the same line simultaneously.

🔧

Legacy Peripheral Data Port

The SN74LS642N suits a legacy peripheral data port where an 8-bit parallel path must operate bidirectionally at 5 V. Eight parallel channels provide a practical match to byte-oriented buses, and DIR can be driven by a peripheral select or address decoder. The G input may be tied to a qualified bus-enable signal so that the transceiver remains inactive while another device owns the shared bus. The open-collector outputs require external pull-up resistors, providing flexibility for mixed-family buses, but the chosen resistance must satisfy both sink-current and rise-time requirements. Confirm the inverting behavior at the system boundary and retain timing margins for the slowest valid bus transaction.

🧩

Bus Isolation and Direction Control

The SN74LS642N provides both direction selection and active bus isolation through its DIR and G controls, making it useful when multiple interface blocks share a communication line. During normal transfer, DIR determines the A-to-B or B-to-A path; during idle or fault intervals, G can disable the device so the buses are effectively isolated. This arrangement is especially helpful in systems requiring controlled bus turnaround rather than fixed one-way drivers. The open-collector architecture needs pull-up resistors on each line, and the design must avoid changing DIR while another node drives the same bus. Validate enable polarity and timing against the manufacturer data sheet and the external bus owner's control protocol.

সুপারিশকৃত পণ্যের সারসংক্ষেপ

MC74F243M onsemi ব্যবহৃত হয়: Bidirectional Instrument Bus, Computer Peripheral Bus Interface, Test and Measurement Control Interface, Industrial Control Bus, Legacy Peripheral Data Port, Bus Isolation and Direction Control MAX3221IPWR Texas Instruments ব্যবহৃত হয়: Bidirectional Instrument Bus MC74F538M Octal transceiver for compatible multipoint data-bus interfaces ব্যবহৃত হয়: Computer Peripheral Bus Interface, Test and Measurement Control Interface, Industrial Control Bus, Legacy Peripheral Data Port, Bus Isolation and Direction Control
What is the SN74LS642N?
The SN74LS642N is an octal, 8-bit, inverting bus transceiver with open-collector outputs from Texas Instruments. It transfers asynchronous data between two buses in either direction, selected by the DIR input, while the G enable input can disable the device to isolate the buses. According to the Texas Instruments SN74LS642 data sheet, the device is packaged as a 20-pin PDIP and operates from 4.75 V to 5.25 V.
How does the DIR and G control work in the SN74LS642N?
The DIR input selects data flow, while the G input enables or disables the SN74LS642N. A high DIR level sends data from the A bus to the B bus, and a low DIR level reverses that direction. The Texas Instruments data sheet describes G as an enable control that can disable the device so the buses are effectively isolated. Firmware and hardware must ensure that the DIR and G states never place conflicting drivers on the shared bus.
What is the operating voltage of the SN74LS642N?
The SN74LS642N operates from 4.75 V to 5.25 V, placing it in the 5 V logic class. This range is confirmed by the device listing and technical comparison information for the SN74LS642N. According to the Texas Instruments SN74LS642 data sheet, the G and DIR inputs provide bus direction and isolation control. Use a supply within this range while ensuring that pull-up resistors do not create a voltage outside the intended bus levels.
Why does the SN74LS642N use open-collector outputs?
The open-collector outputs allow the SN74LS642N to participate in buses that use external pull-up resistors. According to the Texas Instruments product page, the SN74LS642 has open-collector outputs, and the device listing identifies 12 mA output-current capability. This arrangement supports wired-AND-style bus behavior when required, but every open-collector bus line needs a suitable pull-up resistor and an analysis of rise time, bus capacitance, and maximum sink current.
Where can I download the SN74LS642N datasheet PDF?
The official SN74LS642N technical information is available through Texas Instruments at https://www.ti.com/lit/gpn/SN74LS642. The manufacturer data sheet covers the octal bus transceivers, their A-to-B and B-to-A operating modes, the DIR input, the G enable input, electrical characteristics, and package information. Use the manufacturer document for final pin assignments, timing limits, absolute maximum ratings, and recommended operating conditions.
Where can I find the SN74LS642N pinout?
The SN74LS642N pinout is defined in the Texas Instruments SN74LS642 data sheet and corresponds to the 20-pin PDIP package. The arrangement includes eight A-side and eight B-side data connections together with DIR, G, VCC, and GND. When assigning PCB tracks, use the pin-description table and package drawing in the manufacturer data sheet rather than relying only on a generic 20-pin symbol, because physical pin numbering is essential for a correct through-hole footprint.
What is the difference between SN74LS642N and SN74LS641N?
The principal functional difference is the polarity of the data path: the SN74LS642N is identified as an inverting transceiver, while the SN74LS641N is the corresponding non-inverting variant. Both families use the octal transceiver architecture and DIR and G controls, but substituting one for the other can invert every transferred data bit. Confirm the required logic polarity, timing limits, and complete pin functions in the relevant manufacturer data sheet before considering the non-inverting part.
When should I choose the SN74LS642N over a non-inverting bus transceiver?
Choose the SN74LS642N when the receiving logic expects inverted data and the bus interface requires open-collector outputs with external pull-up resistors. Its inverting channel behavior, 4.75 V to 5.25 V supply range, and DIR-controlled bidirectional operation suit legacy TTL bus designs. Select a non-inverting transceiver when downstream logic must preserve input polarity, and verify timing, enable polarity, and bus-level compatibility before making that change.
Is the SN74LS642N suitable for a bidirectional instrument bus?
The SN74LS642N is suitable for a bidirectional instrument bus when inverted data and open-collector signaling are acceptable. Its eight channels, DIR-controlled direction, G-controlled isolation, and 4.75 V to 5.25 V operating range support asynchronous two-way communication. According to the Texas Instruments data sheet, the enable input can isolate the buses. Add correctly calculated pull-up resistors, account for bus capacitance, and ensure that connected instruments use compatible data polarity and logic levels.
What can replace the SN74LS642N?
The closest drop-in choices are manufacturer-labeled SN74LS642N devices offering the same octal, inverting, open-collector transceiver function in the 20-pin PDIP package. The cross-reference results identify SN74LS642N listings from Texas Instruments, onsemi, Motorola, International Rectifier, and Rochester Electronics. A replacement must match the complete pinout, logic polarity, DIR and G behavior, electrical timing, supply range, and output loading; an SOIC-package variant cannot replace the PDIP part without PCB changes.
Can an onsemi SN74LS642N replace the Texas Instruments SN74LS642N?
An onsemi SN74LS642N can be considered as a second-source candidate because it uses the same SN74LS642N ordering code and appears in the cross-reference results as an octal bus transceiver. Before treating it as a drop-in replacement, compare the 20-pin PDIP pinout, open-collector output rating, inverting behavior, DIR and G polarity, propagation timing, supply current, and absolute maximum ratings. Use the applicable manufacturer data sheet for final qualification.
What is the best cross-brand equivalent for the SN74LS642N?
The best cross-brand equivalent is a manufacturer-labeled SN74LS642N that retains the same 20-pin PDIP footprint and functional behavior. Cross-reference records identify SN74LS642N devices associated with onsemi, Motorola, International Rectifier, and Rochester Electronics. These are candidates rather than unconditional approvals: verify pin names and numbers, 4.75 V to 5.25 V operation, 12 mA output-current class, Schmitt-trigger inputs, propagation delay, and open-collector output specifications before production use.
Where can I buy the SN74LS642N online?
The SN74LS642N can be requested through the Request a Quote form on this XAIPART product page. The form is the appropriate route for checking current availability, MOQ, lead time, and the exact package and ordering suffix needed for an assembled bill of materials. The device is also listed by Texas Instruments and appears in distributor catalogs, but live inventory changes and should not be treated as a guaranteed stock commitment.
What is the price of the SN74LS642N?
Current pricing for the SN74LS642N should be obtained through the Request a Quote form on this page because availability and volume pricing can change. The request can identify the required quantity, tube or other packaging format, and acceptable shipment date. For engineering comparisons, focus on the technical facts rather than a static price: 8-bit bidirectional operation, inverting transfer, open-collector outputs, and the 20-pin PDIP package.
Is the SN74LS642N in stock and what is its lead time?
Stock and lead time for the SN74LS642N should be confirmed through the Request a Quote form on this page. A sourcing request should state the required quantity, production schedule, and acceptable packaging. The device is identified by Texas Instruments as an octal bus transceiver with open-collector outputs, while the current distributor catalog presence confirms product availability rather than a guaranteed quantity in stock.
What are the key specifications of the SN74LS642N that engineers should know?
The key SN74LS642N specifications are eight bidirectional data bits, inverting logic, open-collector outputs, a 4.75 V to 5.25 V supply range, 12 mA output-current capability, Schmitt-trigger inputs, and a 20-pin PDIP package. According to the Texas Instruments SN74LS642 data sheet, DIR selects the direction of data transfer and G can disable the device for bus isolation. External pull-up resistors are required for the open-collector bus lines.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SN74LS642N — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the SN74LS642N when the design requires an octal, bidirectional, inverting bus transceiver with open-collector outputs, DIR-based direction control, G-based isolation, and a 4.75 V to 5.25 V supply. Its 20-pin PDIP package is particularly useful for through-hole legacy equipment and maintenance designs. A manufacturer-labeled SN74LS642N from another source can be evaluated when its complete timing, electrical, and pin data match. Choose the SN74LS641N instead when the interface must preserve data polarity, because the two families differ at the logical inversion stage. Do not use the SN74LS642NSRG4 as a board-level drop-in replacement for a PDIP footprint unless the PCB is redesigned for SOIC. For any second source, verify open-collector sink current, Schmitt-trigger thresholds, propagation delay, DIR and G polarity, supply current, and absolute maximum ratings before production release.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য SN74LS642N SN74LS642N SN74LS642N SN74LS642N SN74LS642N
Package 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP 20-pin PDIP
Brand Texas Instruments Texas Instruments onsemi Motorola International Rectifier Rochester Electronics
Function Octal inverting bus transceiver Octal inverting bus transceiver Octal inverting bus transceiver Octal inverting bus transceiver Octal inverting bus transceiver Octal inverting bus transceiver
Number of Bits 8 bits 8 bits 8 bits 8 bits 8 bits 8 bits

মূল পার্থক্যসমূহ

  • Bidirectional octal interface with integrated direction control (বনামSN74LS641N)
  • Open-collector bus output enables wired bus arrangements (বনামSN74LS641N)
  • Schmitt-trigger inputs improve tolerance of slow transitions (বনামSN74LS641N)
  • Established 20-pin PDIP format for through-hole legacy systems (বনামSN74LS642NSRG4)

ডিজাইন নোট

Place one external pull-up resistor on every open-collector data line and route each resistor close to the associated bus node. The resistor must source enough current for the receiver while keeping the bus rise time within the timing budget. Account for total bus capacitance, connector capacitance, and leakage current rather than selecting the resistance from receiver current alone.

Do not allow two enabled devices to drive the same open-collector line at the same time. Even though open-collector outputs can tolerate wired-AND behavior, incorrect DIR or G sequencing can corrupt data or exceed the available sink current. Define startup, arbitration, and turnaround states so that one node owns the bus before another begins driving it.

Keep the DIR and G control traces short and keep the eight data channels away from high-energy switching nodes. For cable-connected buses, minimize stub length and provide the appropriate connector protection. Verify signal integrity with the actual pull-up resistance and bus load because reducing resistance improves rise time but increases sink current.

The SN74LS642N operates in the 4.75 V to 5.25 V range, so its supply must remain within those limits under startup, load, and temperature conditions. Decouple the supply close to the VCC and GND pins according to the manufacturer guidance. Confirm that pull-up current and bus loading are included in the complete power-budget calculation rather than evaluating only the transceiver's own supply current.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Unknown
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

Compliance status is not stated in the manufacturer product information or distributor records available for this product.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

SN74LS642N datasheet SN74LS642N pinout SN74LS642N datasheet pdf Texas Instruments SN74LS642N SN74LS642N equivalent SN74LS642N replacement SN74LS642N cross reference SN74LS642N vs SN74LS641N SN74LS642N 20 pin PDIP SN74LS642N open collector transceiver SN74LS642N price SN74LS642N stock SN74LS642N application circuit SN74LS642N DIR G enable

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments SN74LS642N SN74LS641N SN74LS642NSRG4 onsemi Motorola International Rectifier Rochester Electronics octal bus transceiver bidirectional transceiver open-collector output inverting logic 74LS TTL logic family low-power Schottky TTL DIR input G enable input Schmitt trigger 4.75 V to 5.25 V power supply 20-pin PDIP PDIP package family through-hole mounting external pull-up resistor asynchronous data bus bus isolation 12 mA output current
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন