Texas Instruments

SN75121N - Dual 2/0 Line Driver, 16-PDIP | Texas Instruments

MPN: SN75121N ✓ সক্রিয়
16-pin through-hole DIP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

SN75121N সারাংশ

The Texas Instruments SN75121N is a dual 2/0 line driver IC designed for digital data transmission over lines with impedances from 50 to 500 ohms. The device is compatible with standard TTL logic and supply-voltage levels and is packaged in a 16-pin through-hole DIP. Each of its two channels provides a low-impedance emitter-follower output capable of driving terminated coaxial-cable or twisted-pair lines.

A line driver is an interface IC that converts a digital logic signal into a stronger output suitable for transmission through a cable, bus, or other wired connection. In the electronic-component hierarchy, the SN75121N belongs to the line-driver family within interface ICs and broader digital communication and signal-conditioning systems. Its purpose is to restore signal amplitude and loading capability after a source device has driven a line through an electrically demanding interconnect.

The SN75121N provides two independent driver channels in a 2/0 organization, meaning two outputs and no corresponding input-driver designation in the product description. Its emitter-follower output topology provides low output impedance, while the uncommitted outputs support wired-OR logic. These characteristics make the device useful where multiple signal sources must share a transmission line under properly controlled pull-up or pull-down arrangements.

The low-impedance outputs are intended for terminated lines such as coaxial cable and twisted pair. When calculating transmission-line performance, account for the 50-to-500-ohm line range identified by Texas Instruments. Logic compatibility simplifies connection with conventional TTL systems, while the 16-pin DIP format supports through-hole construction and prototype boards where a surface-mount package is unnecessary.

Typical applications include industrial control links, point-to-point digital communication, instrument interfaces, legacy computer peripherals, and factory equipment that uses balanced or unbalanced terminated connections. The device can also support bus arrangements where wired-OR behavior is intentional. Application-specific timing, cable length, termination, and noise-margin requirements still need to be validated in the complete system.

The primary design consideration is the output-stage implementation. Because the outputs are uncommitted and use emitter-follower behavior, the board designer must provide the correct biasing, termination, pull-up or pull-down arrangement, and signal-return path. Do not assume that a line will remain valid solely because the driver can source current; verify voltage levels, edge rate, bus contention, cable capacitance, and receiver thresholds in the finished design.

This page organizes the Texas Instruments SN75121N around its verified line-driver function, package, interface characteristics, replacement choices, comparison parameters, and practical implementation concerns. It is intended to help engineers identify the correct package variant, distinguish genuine pin-compatible alternatives from merely similar drivers, and plan the surrounding termination and signal-integrity circuitry before committing a design to production.

এর জন্য ড্রপ-ইন বিকল্প SN75121N — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible SN75121N (একই form factor এবং footprint) — পার্থক্য রয়েছে Logic Compatibility, Output State, Product Type.

Texas Instruments
Logic Compatibility: Standard TTL
Output State: Uncommitted output
Product Type: Dual line driver
এর সাথে তুলনা করুন SN75121N →
Texas Instruments
Logic Compatibility: TTL compatible
Output State: 0 or 3 receiver output states
Product Type: Triple differential line receiver
এর সাথে তুলনা করুন SN75121N →

SN55121N

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 16-pin DIP
Retains the 2-channel line-driver topology and 16-pin DIP package, a 0% package and channel-count difference; verify supply-level and output-stage details before substitution.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SN75122N

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
📦 16-pin DIP
Retains the dual-driver and 16-pin DIP format, a 0% package and channel-count difference; the output implementation and enable behavior require comparison before fitting.

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SN75123N

✅ ড্রপ-ইন
Texas Instruments
📦 16-pin DIP
Dual line driver · 2 channels · Standard TTL · 5 V · Low-impedance emitter-follower · Uncommitted output · 3.11 V at -59.3 mA · IBM System 360 input/output interface

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SN75124N

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
Texas Instruments
📦 16-pin DIP
Triple differential line receiver · 3 channels · 5 V · TTL compatible · Built in · IBM System 360 input/output interface · 16-pin PDIP · Through-hole

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SN75121N বিশেষণ

Product Type Dual line driver
Driver Configuration 2/0
Number of Driver Channels 2 channels
Supported Line Impedance 50 ohm to 500 ohm
Logic Compatibility Standard TTL
Output Topology Low-impedance emitter follower
Output State Uncommitted output
Logic Function Wired-OR capable
Supported Transmission Line Terminated coaxial cable or twisted pair
Package Type 16-pin through-hole DIP
Package Designation 16-PDIP
মাউন্টিং টাইপ Through-hole

SN75121N 16-pdip পিন কনফিগারেশন গাইড

SN75121N (16-pdip প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

SN75121N-এর জন্য 16-pdip প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি SN75121N.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

SN75121N এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Point-to-Point Digital Data Links, Industrial Control Equipment Interfaces, Coaxial Cable Data Transmission, Twisted-Pair Communication, Wired-OR Shared-Line Logic, Legacy Computer and Peripheral Interfaces.

🌐

Point-to-Point Digital Data Links

The SN75121N fits point-to-point links that need a stronger line interface than a conventional logic output can provide. Its two low-impedance emitter-follower channels can drive terminated coaxial cable or twisted pair with line impedances from 50 to 500 ohms, while standard TTL compatibility simplifies the logic side of the design. The transmitter should be configured with the correct termination and signal-return path, and system timing must remain within the selected receiver's requirements.

🏭

Industrial Control Equipment Interfaces

The SN75121N can support legacy industrial equipment interfaces that use TTL-compatible dual line-driver channels over copper wiring. Two independent channels are useful for command, acknowledgment, or status signaling when the physical line supports the specified 50-to-500-ohm impedance range. Industrial implementation should add the required surge, isolation, grounding, and enclosure measures, and must verify the device's temperature and regulatory requirements for the final equipment category.

📺

Coaxial Cable Data Transmission

The SN75121N's low-impedance emitter-follower outputs are suitable for driving terminated coaxial cable in digital transmission arrangements. The 50-to-500-ohm line range covers multiple common cable impedances, and the 2/0 organization provides two transmit channels in one 16-pin DIP device. For reliable operation, select the proper remote termination, maintain a controlled return path, account for cable capacitance and attenuation, and verify edge-rate performance with the actual receiver.

🔧

Twisted-Pair Communication

A twisted-pair interface can use the SN75121N when the circuit requires TTL-compatible drive levels and terminated lines. Its low output impedance helps the transmitter handle the load presented by a cable network, while the dual-channel configuration can carry two related signals. Twisted-pair construction can improve noise rejection when the signal and return conductors are handled correctly, but termination balance, skew, grounding, and common-mode behavior still require board-level validation.

🔧

Wired-OR Shared-Line Logic

The SN75121N is appropriate for a deliberately designed wired-OR bus because Texas Instruments identifies its outputs as uncommitted. The external bias network and output-state behavior become part of the interface architecture, allowing multiple compatible sources to share a line under controlled conditions. Designers must prevent simultaneous active outputs from causing destructive contention, select suitable current limits, and confirm that every receiver recognizes the resulting valid low and high states.

🖥️

Legacy Computer and Peripheral Interfaces

The SN75121N can be used when maintaining or expanding legacy digital peripheral connections based on TTL-compatible line signaling. Its dual channels allow one cable to carry two one-way signals, and its emitter-follower outputs can drive terminated coax or twisted pair. Retrofitting should begin with a complete signal audit because older equipment may rely on unusual wired-OR behavior, termination, or timing that must be preserved rather than modernized with an electrically different interface.

What is the SN75121N?
The SN75121N is a Texas Instruments dual 2/0 line-driver IC for digital data transmission over lines with impedances from 50 to 500 ohms. It uses low-impedance emitter-follower outputs, is compatible with standard TTL logic and supply-voltage levels, and is offered in a 16-pin through-hole DIP package. According to the manufacturer product page, the uncommitted outputs also allow wired-OR logic arrangements.
What are the key specifications of SN75121N that engineers should know?
The SN75121N provides two driver channels in a 2/0 configuration, supports transmission lines from 50 to 500 ohms, and uses low-impedance emitter-follower outputs. The device is compatible with standard TTL logic and supply-voltage levels and comes in a 16-PDIP package. Texas Instruments identifies terminated coaxial cable and twisted pair as representative line types, while its uncommitted outputs permit wired-OR logic.
What is the operating voltage of SN75121N?
The SN75121N is compatible with standard TTL logic and supply-voltage levels, but the numeric operating-voltage range is not stated in the product-page information used for this record. Consult the manufacturer datasheet before setting the supply rail or checking absolute maximum conditions. The line-impedance specification of 50 to 500 ohms and the TTL-compatible interface are confirmed by Texas Instruments.
Where can I download the SN75121N datasheet PDF?
The SN75121N datasheet is available through the Texas Instruments SN75121 product page and the linked PDF listing identified for this part. The product page is the best starting point because it connects the device family, documentation, and support resources. Use the manufacturer datasheet to confirm the numeric supply limits, electrical characteristics, pin description, and recommended operating conditions.
Where can I find the SN75121N pinout?
The SN75121N pinout is defined by the Texas Instruments manufacturer datasheet for the 16-pin DIP package. Use the pin-description table and package drawing in that document when assigning PCB tracks or probing the device. The verified product information establishes a 16-PDIP package but does not reproduce the complete pin names, so the package should not be routed solely from the summary listing.
What line impedances can the SN75121N drive?
The SN75121N is designed for lines having impedances from 50 to 500 ohms, according to the Texas Instruments product page. Its low-impedance emitter-follower outputs are intended to drive terminated coaxial cable or twisted pair. Actual signal integrity also depends on cable length, capacitance, termination value, data rate, and receiver thresholds, so the impedance range is a starting point rather than a complete interface specification.
Can SN75121N drive coaxial cable or twisted pair?
Yes, the SN75121N can drive terminated coaxial cable or twisted-pair lines because its low-impedance emitter-follower outputs are intended for those transmission media. Texas Instruments specifies lines with impedances from 50 to 500 ohms. The board must still implement the appropriate termination and signal-return arrangement, and the finished interface should be checked for bandwidth, reflections, and receiver noise margins.
Does SN75121N support wired-OR logic?
The SN75121N supports wired-OR arrangements because Texas Instruments describes its outputs as uncommitted. The uncommitted state allows the board designer to select the required biasing and combine signals according to the system architecture. Multiple active drivers must never contend in a way that produces unacceptable current or an undefined voltage, so pull-up or pull-down implementation and fault conditions require explicit analysis.
What can replace SN75121N?
The closest documented replacements are same-brand dual line-driver families in the 16-pin DIP format, including SN75123N, with SN55121N, SN75122N, and SN75124N identified as additional family alternatives. Pin compatibility must be confirmed against the manufacturer pin tables before substitution because output topology, voltage levels, and logic behavior can differ even when the package and driver count match.
Is SN75123N the same as SN75121N?
SN75123N is a closely related Texas Instruments dual line driver in the same 16-pin DIP family, and it is the most direct candidate for a replacement review. It is not automatically an identical device: the manufacturer documentation for each MPN must be checked for output-stage behavior, enable or control functions, supply range, and propagation timing. Treat it as a pin-compatible family candidate until those electrical differences are confirmed.
When should I choose SN75121N over SN75123N?
Choose the SN75121N when the design specifically requires its documented emitter-follower output behavior, TTL-compatible interfacing, and wired-OR-compatible uncommitted outputs. Consider the SN75123N when it meets the required logic and timing specifications and offers a suitable implementation for the target interface. The deciding evidence should come from the pin and electrical tables for both devices rather than package appearance alone.
Is SN75121N suitable for industrial communication links?
The SN75121N can suit point-to-point industrial communication links that operate within its 50-to-500-ohm line-impedance range and TTL-compatible signaling environment. Its low-impedance emitter-follower outputs can drive terminated coaxial or twisted-pair media. Industrial suitability must still be established for temperature range, isolation, surge protection, EMC requirements, cable length, and any regulated-industry qualification.
What is the best SN75123N equivalent for SN75121N?
SN75123N is the closest same-brand family alternative identified for a drop-in review because it is also a Texas Instruments dual line driver offered in a 16-pin DIP. Other family members may be considered only after checking their individual pin descriptions and electrical characteristics. A true replacement must preserve the footprint, pin functions, supply behavior, output impedance, and logic thresholds required by the original circuit.
How do I design the SN75121N line termination and biasing?
Design the termination and biasing around the selected cable impedance, driver output topology, and receiver thresholds rather than applying a universal resistor value. The SN75121N uses low-impedance emitter-follower outputs, and its uncommitted outputs permit application-defined biasing for wired-OR use. Confirm the required pull-up or pull-down arrangement against the manufacturer application information and validate reflections and logic margins on the assembled interconnect.
Where to buy SN75121N online and what is its price?
Use the Request a Quote form on this page to inquire about SN75121N availability, current pricing, and lead time. The structured price field is populated only when a qualifying quantity-break listing is available, avoiding a stale or ambiguous figure. For engineering confirmation, specify the 16-PDIP package, manufacturer part number SN75121N, and required quantity in the request.
Is SN75121N in stock and what is its lead time?
Current SN75121N stock and lead time should be requested through the Request a Quote form on this page because availability can change by quantity and procurement status. Provide the exact MPN SN75121N, the 16-PDIP package, target quantity, and required delivery date. Do not infer stock status from a general family listing or from the presence of the part in an online catalog.
Is SN75121N RoHS compliant?
The RoHS status must be confirmed for the exact SN75121N ordering configuration through the Texas Instruments product documentation or compliance declarations. A current compliance conclusion should not be inferred solely from the chip's general product category. Review the exact manufacturer material declaration and any assembly or halogen-related declarations required by the finished equipment before release to production.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SN75121N — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose the SN75121N when the design requires two TTL-compatible line-driver channels, low-impedance emitter-follower outputs, and the flexibility of uncommitted outputs for wired-OR logic. It is particularly appropriate for terminated coaxial or twisted-pair links operating within the documented 50-to-500-ohm impedance range. Review SN75123N first when a directly related dual line driver may satisfy a new design or repair, but compare its exact output behavior and timing before fitting it to an existing SN75121N board. SN55121N, SN75122N, and SN75124N remain same-brand family candidates when their pin and electrical tables match the original circuit more closely. Do not select a quad-driver or three-driver product merely to match the 16-pin package; SN75174N and SN75113N have different channel organizations and are not drop-in equivalents. If none of the family candidates preserves the required logic levels, timing, output state, and termination behavior, retain the original MPN or redesign the interface rather than forcing a footprint-only substitution.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য SN55121N SN75122N SN75123N SN75124N
Package 16-pin through-hole DIP 16-pin through-hole DIP 16-pin through-hole DIP 16-pin through-hole DIP 16-pin through-hole DIP
Brand Texas Instruments Texas Instruments Texas Instruments Texas Instruments Texas Instruments
Driver Configuration 2/0 Dual line driver; detailed configuration not verified Dual line driver; detailed configuration not verified 2/0 Dual line driver; detailed configuration not verified
Number of Driver Channels 2 channels 2 channels 2 channels 2 channels 2 channels

মূল পার্থক্যসমূহ

  • Dual emitter-follower outputs with wired-OR capability (বনামSN75121N)
  • Direct 50-to-500-ohm transmission-line support (বনামSN75122N)
  • Established standard-TTL interface (বনামSN75123N)

ডিজাইন নোট

Route each driver channel with the transmission-line geometry appropriate to its impedance. Keep the logic input traces short and place the required input and output bypass components near the IC according to the manufacturer guidance. For a through-hole DIP implementation, preserve a direct ground return and avoid long loops between the device ground pins and the cable shield or receiver reference.

Validate termination, rise time, reflections, and receiver noise margin with the actual cable and load rather than relying only on the 50-to-500-ohm line-impedance statement. The SN75121N uses low-impedance emitter-follower outputs, so the output state, pull network, and remote termination jointly determine the waveform. Check that the selected receiver recognizes every valid bus state and that no unused driver channel produces an active output.

Do not substitute a driver solely because it has the same 16-pin DIP outline. Confirm pin functions, output-stage behavior, supply levels, input thresholds, propagation timing, and output-state requirements against the manufacturer documentation for the exact MPN. SN75113N and SN75174N are related line-driver products but have different driver organizations, so they are not included as direct drop-in choices.

Use a controlled return path and apply the appropriate cable shield termination to reduce common-mode noise and prevent the line from behaving as an unintended antenna. The uncommitted outputs allow application-defined biasing, which can increase sensitivity to noise if the pull network is weak or slow. Review rise time, current demand, and EMI filtering together before raising line speed.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No exact-package compliance declaration was identified for SN75121N. Confirm RoHS, REACH, lead-free, halogen-free, and conflict-minerals status for the exact manufacturer ordering configuration before production release.

ডেটা যাচাই করা হয়েছে: 2026-11-09 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

SN75121N datasheet SN75121N pinout SN75121N datasheet pdf SN75121N equivalent SN75121N replacement SN75121N cross reference SN75121N vs SN75123N SN75121N 16-PDIP SN75121N dual line driver SN75121N 50 500 ohm Texas Instruments SN75121N SN75121N price SN75121N stock SN75121N coaxial cable driver SN75121N wired OR logic

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

Texas Instruments SN75121N SN55121N SN75122N SN75123N SN75124N dual line driver line driver interface IC digital data transmission signal conditioning semiconductor TTL logic emitter follower low-impedance output uncommitted output wired-OR logic 50 ohm line impedance 500 ohm line impedance coaxial cable twisted pair 16-pin DIP through-hole package termination resistor
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন