SN75185N - 3/5 RS-232 Transceiver, 120 kbit/s | Texas Instruments
MPN: SN75185N ✓ সক্রিয়SN75185N সারাংশ
An RS-232 transceiver is a signal-conditioning device that converts logic-level TTL/CMOS signals into the differential voltage levels defined by the RS-232 standard, and converts returning RS-232 levels back into logic levels for the host controller. In the interface hierarchy, the SN75185N sits at the physical-layer boundary between a UART transmitter/receiver inside a microprocessor and the physical DB9 or DB25 serial connector of an IBM PC/AT-class or compatible host.
Key features include the asymmetric channel count of three drivers and five receivers, which allows one UART port to share several receive lines or monitor several inputs. The flow-through pinout matches the SN75C185, making board-level interchanges straightforward, and the bipolar process provides the drive current and slew characteristics expected from legacy PC serial ports. Operating voltage is the standard 5 V class, and the device is offered in a through-hole plastic DIP suited to legacy industrial and instrumentation chassis.
Technically, the SN75185N integrates multiple SN75188-style bipolar drivers and SN75189-style receivers on one die. Because the receivers are of the threshold type with internal hysteresis, noise immunity at the connector side is high, while the drivers provide the ±5 V to ±15 V swing that RS-232 requires. Data rates of up to 120 kbit/s are adequate for legacy UART traffic, and the combination of three drivers lets a single port support transmit plus two additional output signals such as DTR and RTS if the host software drives them directly.
Typical applications include legacy PC/AT serial port interfaces, industrial control panels with DB9 connectors, laboratory and test instrumentation with legacy serial console ports, embedded boards that must talk to older supervisory software, and multi-drop or monitoring arrangements where several status lines are read back from one port.
A key design consideration is that the SN75185N is a legacy bipolar part intended for 5 V single-supply operation and through-hole assembly; it is not a modern 3.3 V tolerant design, and it should not be substituted into RS-232 channels running at 3.3 V logic without a level shifter. Plan PCB real estate for a 20-pin DIP footprint if the goal is a drop-in repair of an existing board rather than a new design.
This page brings together the manufacturer interface standards, ESD ratings, channel configuration, pin-compatibility notes, and drop-in alternatives for the SN75185N, plus practical design and sourcing guidance that is not consolidated in a single place on the manufacturer datasheet.
এর জন্য ড্রপ-ইন বিকল্প SN75185N — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
SN75C185N
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
SN75185
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
SN75C185
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
SN75185N বিশেষণ
| Device Type | RS-232 transceiver (3 drivers / 5 receivers) |
| Number of Drivers | 3 |
| Number of Receivers | 5 |
| Maximum Data Rate | 120 kbit/s |
| Standards Compliance | TIA/EIA-232-F, ITU V.28 |
| ESD Protection on RS-232 Pins | 10 kV (Human-Body Model) |
| ESD Protection on All Other Pins | 3.5 kV (Human-Body Model) |
| Package Type | PDIP-20 (20-pin plastic dual in-line) |
| পিন সংখ্যা | 20 |
| মাউন্টিং টাইপ | Through-hole |
| Process Technology | Bipolar |
SN75185N pdip-20 (20-pin plastic dual in-line) পিন কনফিগারেশন গাইড
SN75185N (pdip-20 (20-pin plastic dual in-line) প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি SN75185N.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
SN75185N এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Legacy PC/AT Serial Port Interface, Industrial Control Panel DB9 Connectivity, Laboratory and Test Instrumentation Console, Multi-Channel Status Monitoring, Embedded Equipment Retrofit and Repair, Point-of-Sale and Peripheral Connectivity.
Legacy PC/AT Serial Port Interface
The SN75185N was designed for the UART-to-DB9 interface of IBM PC/AT and compatible hosts, and it remains the natural choice for restoring or cloning a legacy serial port. Three drivers cover TXD, RTS and DTR, while five receivers bring back CTS, DSR, DCD, RI and the loopback/data status lines from the connector. With support to 120 kbit/s, the part spans 9600 bit/s console links through 115200 bit/s traffic, and the 10 kV HBM ESD rating on the RS-232 pins protects the connector side during routine cabling and servicing.
সুপারিশকৃত
Industrial Control Panel DB9 Connectivity
Machinery and process-control panels frequently keep RS-232 connectors long after the surrounding electronics moved to Ethernet, and the SN75185N bridges a modern UART core to that connector in a single IC. Driving three outputs and reading five inputs in one 20-pin DIP reduces board area compared with separate driver and receiver pairs, which matters in crowded control cabinets. The bipolar circuits sustain the slew and drive current that long shielded cables demand, while the flow-through pinout keeps traces short between the transceiver and the DB9 header.
সুপারিশকৃত
Laboratory and Test Instrumentation Console
Bench instruments, programmers and analyzers still expose RS-232 service consoles, and the SN75185N provides a compact way to add that port alongside USB and Ethernet interfaces. The five receivers allow the instrument to read back handshake and status signals so supervisory software can confirm that a command was accepted, and the three drivers let the host toggle RTS or DTR for hardware handshaking on slower links. At 120 kbit/s the interface is fast enough for firmware upload sessions and log transfers without adding meaningful delay to a test cycle.
সুপারিশকৃত
Multi-Channel Status Monitoring
Where a single serial port has to supervise several remote devices, the asymmetric 3/5 channel count of the SN75185N lets one port handle both a data channel and several discrete status or interlock lines. Three drivers can drive request or select signals to multiple targets while five receivers monitor ready, fault and acknowledge inputs coming back from them. This arrangement replaces several separate single-channel RS-232 devices, and the 3.5 kV HBM rating on the non-RS-232 logic pins protects the host-side inputs that are tied to system logic.
সুপারিশকৃত
Embedded Equipment Retrofit and Repair
The SN75185N through-hole PDIP-20 package makes it a natural part for repairing or retrofiting older embedded equipment where the board originally used a socketed 20-pin transceiver. Because the flow-through pinout matches the SN75C185, boards can be respun or hand-patched with either the bipolar or CMOS variant without respinning the copper. The 10 kV HBM ESD rating on the RS-232 pins is particularly valuable in retrofit work, where the connector is often routed through poorly shielded harnesses in the field.
সুপারিশকৃত
Point-of-Sale and Peripheral Connectivity
Receipt printers, weigh scales, card readers and barcode scanners in the point-of-sale channel still use RS-232 for command and status exchange, and the SN75185N provides the physical layer in a single small DIP package. The three drivers support data plus printer handshakes, while the five receivers read paper-out, error and busy indications so the host can queue transactions correctly. Because the transceiver is a through-hole part, it fits the large-hole, long-lifetime PCBs typical of commercial POS equipment built for serviceability.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SN75185N — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | SN75C185N | SN75185 | SN75C185 |
|---|---|---|---|---|
| Package | PDIP-20 (20-pin plastic dual in-line) | PDIP-20 - same footprint | PDIP-20 - same footprint | PDIP-20 - same footprint |
| Brand | Texas Instruments | Texas Instruments | Texas Instruments | Texas Instruments |
| Device Type | 3 drivers / 5 receivers RS-232 transceiver | RS-232 transceiver, flow-through pinout | 3 drivers / 5 receivers RS-232 transceiver | RS-232 transceiver, flow-through pinout |
| Process Technology | Bipolar | CMOS | Bipolar | CMOS |
| Standards Compliance | TIA/EIA-232-F and ITU V.28 | TIA/EIA-232-F and ITU V.28 | TIA/EIA-232-F and ITU V.28 | TIA/EIA-232-F and ITU V.28 |
| Pin Compatibility | Flow-through pinout, pin-to-pin compatible with SN75C185 | Pin-to-pin compatible with SN75185 | Same pinout as SN75185N | Pin-to-pin compatible with SN75185 |
মূল পার্থক্যসমূহ
- Three drivers and five receivers consolidated in a single 20-pin DIP instead of separate driver and receiver ICs (বনামMC1488NE4)
- Pin-to-pin flow-through layout allows one PCB to accept both bipolar and CMOS implementations (বনামSN75C185N)
- Connector-side ESD rating of 10 kV HBM covers the pins most exposed during cabling (বনামMC1489NG4)
ডিজাইন নোট
Do not treat the SN75185N as a 3.3 V tolerant device. It is a bipolar 5 V class part, and although the receiver thresholds are referenced to the supply rail, the supply voltage and the host-side logic levels must be checked in the datasheet before connecting a 3.3 V UART. If the surrounding controller runs at 3.3 V, use a bidirectional level shifter on TXD and the handshake inputs, or choose a modern 3.3 V-capable RS-232 transceiver instead of forcing the SN75185N onto the rail.
The SN75185N uses a flow-through pinout specifically so that traces run straight from the host logic to the DB9 connector without crossing. Keep the connector-side nets short, keep the ground and chassis-shield return path adjacent to the signal pairs, and place any protection network at the connector rather than at the IC. Because the flow-through arrangement mirrors the SN75C185, you can lay out once and populate either part, which makes it easy to qualify a CMOS version on the same board revision.
The RS-232 driver outputs are large-swing signals and the receiver inputs are high-impedance, so both are sensitive to coupling from adjacent switching nodes. Route the five receiver inputs away from clock, motor and relay traces, keep the ribbon-cable interface short and prefer a shielded cable with the shield tied to chassis ground at the connector. Estimated note: with three drivers simultaneously switching at 120 kbit/s, expect the highest EMI when all three outputs change state together, so stagger data and handshake toggling in firmware where the protocol allows.
Although the device is a 5 V part, the RS-232 driver outputs swing above and below the supply rails to meet the TIA/EIA-232-F voltage levels, and the supply decoupling must be sized for the driver current pulses. Place a 0.1 uF ceramic capacitor plus a bulk electrolytic or 1 uF to 10 uF ceramic close to the supply pins, and verify the maximum total supply current in the datasheet against the worst case where all three drivers switch simultaneously.
কমপ্লায়েন্স তথ্য
The SN75185N is a legacy bipolar through-hole RS-232 transceiver and is not an AEC-Q100 automotive-qualified device. RoHS, REACH, lead-free and halogen-free statements were not present in the retrieved pages and must be confirmed on the Texas Instruments SN75185 product page or via a current material declaration before use in restricted applications.