MaxLinear

SP3232EUCA-L - 3.3V 1Mbps RS-232 IC | MaxLinear

MPN: SP3232EUCA-L ✗ জীবনকালের সমাপ্তি
3.3 V Vdss 16-SSOP Package
সর্বনিম্ন অর্ডার পরিমাণ: 1 |

SP3232EUCA-L সারাংশ

The MaxLinear SP3232EUCA-L is a 3.3 V RS-232 interface IC containing two drivers and two receivers, supporting data rates up to 1000 kbps in a 16-SSOP package. Its integrated charge-pump supply supports low-capacitance operation with 0.1 µF capacitors in 3.3 V applications, reducing the external support-component count for compact serial-interface designs.

An RS-232 transceiver is an interface IC that converts logic-level digital signals into RS-232 line levels and converts received RS-232 signals back into digital logic. The SP3232EU belongs to the broader line-driver and line-receiver hierarchy, where the line driver transmits, the line receiver detects, and the transceiver combines both functions. It is particularly relevant to portable and handheld equipment requiring bidirectional asynchronous serial communication.

The principal features include two transmit drivers, two receive receivers, full RS-232 operation, a 3.3 V supply, and a maximum data transmission rate of 1000 kbps. The 1000 kbps rating supports high-speed RS-232 links, while the two-driver and two-receiver arrangement allows two serial channels or a combination of independent transmit and receive paths. The 16-SSOP package also supports compact board layouts where a larger SOIC footprint would be undesirable.

The internal high-efficiency charge pump generates the bipolar voltage required by the RS-232 drivers without requiring an external negative supply. According to the MaxLinear SP3232EU product information, 3.3 V operation requires only 0.1 µF charge-pump capacitors. This architecture simplifies system partitioning, although the external capacitor selection, placement, and tolerance still influence driver amplitude and signal integrity.

Typical uses include portable data terminals, handheld test equipment, industrial serial adapters, embedded serial consoles, and compact peripheral interfaces. The two transmitters and two receivers are useful when a design needs more than one RS-232 direction, while the 1000 kbps capability can accommodate short-distance high-speed links when the connected equipment, cable, and protocol support that rate.

PCB design should follow the manufacturer pin and capacitor-placement guidance, keep charge-pump and receiver-network components close to the device, and provide adequate return paths for both supply rails. The RS-232 interface must also be evaluated for ground offset, cable length, connector protection, and transient immunity; a high logic data rate does not guarantee reliable communication on every cable or grounding arrangement.

এর জন্য ড্রপ-ইন বিকল্প SP3232EUCA-L — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।

এই সিরিজের ভ্যারিয়েন্ট

একই সিরিজের মডেল যেগুলো drop-in compatible SP3232EUCA-L (একই form factor এবং footprint) — পার্থক্য রয়েছে Package, Power-Supply Architecture, Product Type.

MaxLinear
Package: 16-pin TSSOP
Product Type: 2/2 RS-232 transceiver
MaxLinear
Package: 16-TSSOP
Power-Supply Architecture: Integrated charge pump

SP3232EUCY-L/TR

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
MaxLinear
📦 16-SSOP
2/2 RS-232 transceiver · 2 · 2 · 1000 kbps · 3 V to 5.5 V · 3.3 V · RS-232 · EIA/TIA-232-F

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

SP3232EUEY-L/TR

✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়
MaxLinear
📦 16-SSOP
2/2 RS-232 transceiver · 2 · 2 · 3 V to 5.5 V · 1000 kbps · RS-232 · 0.1 µF · 16-TSSOP

মূল্যের জন্য যোগাযোগ করুন

ডেটাশিট দেখুন →

MAX3232EESE

✅ ড্রপ-ইন
📦 16-SSOP
Comparable 2/2 RS-232 function in 16-SSOP at up to 1000 kbps; supply and data rate differ by 0 V and 0 kbps

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ADM3202ARUR

✅ ড্রপ-ইন
📦 16-SSOP
Comparable 2/2 RS-232 interface in 16-SSOP at up to 1000 kbps; core speed differs by 0 kbps

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

ST3232BEYR

✅ ড্রপ-ইন
📦 16-SSOP
Comparable 2/2 RS-232 transceiver in 16-SSOP at up to 1000 kbps; core data rate differs by 0 kbps

📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)

SP3232EUCA-L বিশেষণ

Product Type RS-232 transceiver IC
Number of Drivers 2
Number of Receivers 2
Interface Standard RS-232
সাপ্লাই ভোল্টেজ 3.3 V
Maximum Data Rate 1000 kbps
Power-Supply Architecture Integrated high-efficiency charge pump
Required Charge-Pump Capacitance 0.1 µF in 3.3 V operation
প্যাকেজ 16-SSOP
মাউন্টিং টাইপ Surface mount

SP3232EUCA-L 16-ssop পিন কনফিগারেশন গাইড

SP3232EUCA-L (16-ssop প্যাকেজ)-এর পিন কনফিগারেশন। পিন নম্বরিং, ফাংশন এবং সংযোগ ডায়াগ্রাম প্রস্তুতকারকের ডেটাশিটে সংজ্ঞায়িত করা আছে। সঠিক ফুটপ্রিন্ট এবং সোল্ডারিং নির্দেশিকার জন্য এটি দেখুন।

SP3232EUCA-L-এর জন্য 16-ssop প্যাকেজ পিনআউট ডায়াগ্রাম

এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি SP3232EUCA-L.

দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।

সাধারণ ব্যবহার

SP3232EUCA-L এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Portable Serial Terminal, Industrial Serial Adapter, Handheld Test Instrument, Embedded Serial Console, Instrumentation Control Panel, Peripheral Data Interface.

📱

Portable Serial Terminal

The SP3232EUCA-L suits portable terminals that require two RS-232 communication paths in a compact board area. Its two drivers and two receivers provide bidirectional capability, while the 1000 kbps data rate supports faster command and data transfers than conventional low-speed serial links. The integrated charge-pump supply reduces the number of external support components, and only 0.1 µF capacitors are required for 3.3 V operation according to the MaxLinear product information. Designers should still verify connector protection, cable length, and grounding in the final enclosure because those factors determine whether the nominal 1000 kbps signaling rate remains reliable.

🏭

Industrial Serial Adapter

The SP3232EUCA-L can provide multiple RS-232 channels in an industrial adapter without requiring a separate negative supply rail. Two drivers and two receivers allow two full-duplex connections, and the 3.3 V supply operation aligns with modern embedded control systems. Its 1000 kbps maximum rate is useful for short-distance links carrying configuration, status, or diagnostic data. The charge-pump capacitors must be placed close to the interface pins, and the design should include appropriate protection at externally accessible connectors to prevent transients from reaching the receiver inputs.

🔧

Handheld Test Instrument

A handheld test instrument benefits from the SP3232EUCA-L because it combines two RS-232 drivers, two receivers, and a 1000 kbps data rate in a 16-SSOP package. These functions can support communication with a host computer and an external peripheral without adding a separate negative power supply. The 3.3 V operating supply reduces power-supply complexity, while the 0.1 µF charge-pump capacitance values specified for 3.3 V operation support compact PCB layouts. Engineers should budget connector clearance and consider transmit-disable or power-control behavior when the handheld unit is connected to unpowered accessories.

🖥️

Embedded Serial Console

The SP3232EUCA-L is appropriate for an embedded debug or service console requiring two RS-232 channels and a compact interface section. The two transmitters support connections to two external targets, while the two receivers can monitor command acknowledgements or incoming service requests. Its 1000 kbps capability allows the firmware to use faster serial transfers than low-speed legacy links, subject to the target device's timing. The SSOP footprint helps conserve board area, but designers should follow the manufacturer's capacitor-placement layout and route the RS-232 traces away from sensitive analog or high-speed digital nodes.

📟

Instrumentation Control Panel

Instrumentation control panels can use the SP3232EUCA-L to connect computers, analyzers, or programmable test equipment through RS-232 ports. The dual-channel arrangement reduces the number of interface ICs when both a control port and a status port are needed, while 1000 kbps supports relatively rapid command exchange. Because RS-232 uses bipolar line signaling and can tolerate significant ground-potential differences in some installations, grounding and cable selection remain important. The 3.3 V supply and small charge-pump capacitors help the interface fit into densely populated control hardware.

🔌

Peripheral Data Interface

The SP3232EUCA-L can serve as the legacy serial interface in a peripheral that also contains modern USB or network connectivity. Two RS-232 channels provide flexibility for a primary data link and a secondary configuration or diagnostic channel. The maximum 1000 kbps rate is appropriate for many short-distance peripheral links, while the integrated charge pump avoids an external negative supply and reduces connector-board area. Firmware should validate the remote device's baud-rate tolerance and ensure that both the logic-side ground and the RS-232 signal ground are connected according to the system grounding strategy.

What are the key specifications of SP3232EUCA-L that engineers should know?
The SP3232EUCA-L is a 3.3 V, 1000 kbps RS-232 transceiver with two drivers and two receivers in a 16-SSOP package. According to the MaxLinear SP3232EU product information, its high-efficiency charge-pump supply needs only 0.1 µF capacitors for 3.3 V operation. These specifications place it between general-purpose serial transceivers and high-speed point-to-point RS-232 links.
Where can I download the SP3232EUCA-L datasheet PDF?
The official SP3232EU datasheet and product information are available from MaxLinear at the product-page link on this listing. The SP3232EUCA-L is an ordering-code variant of the SP3232EU family, so engineers should verify the selected package and ordering suffix against the manufacturer pin description and ordering information before releasing a PCB design.
Where can I find the SP3232EUCA-L pinout?
The authoritative SP3232EUCA-L pin assignment is shown in the MaxLinear SP3232EU datasheet under the device pin-description table. The component is a 16-SSOP RS-232 interface IC, but the exact exposed-pad and no-connect details should be taken from that table rather than inferred from a generic SSOP drawing.
What is the operating voltage of SP3232EUCA-L?
The SP3232EUCA-L operates from a 3.3 V supply, and the MaxLinear product information specifically describes 3.3 V charge-pump operation. The device includes two RS-232 drivers and two receivers and supports operation up to 1000 kbps. Board-level designs should provide the supply and decoupling arrangement specified by the manufacturer.
How fast can SP3232EUCA-L transmit RS-232 data?
The SP3232EUCA-L supports RS-232 data rates up to 1000 kbps, or 1 Mbps. The MaxLinear SP3232EU family information identifies the device as a two-driver, two-receiver transceiver intended for high-speed portable and handheld applications. Actual link reliability also depends on cable characteristics, grounding, protection, and the connected equipment.
What does the SP3232EUCA-L charge-pump supply provide?
The SP3232EUCA-L uses an integrated high-efficiency charge pump to generate the voltage required by the RS-232 line drivers. According to the MaxLinear product information, only 0.1 µF capacitors are required for 3.3 V operation. This reduces external component size while avoiding the need for a separate negative supply rail.
What can replace the SP3232EUCA-L in a 16-SSOP design?
The closest replacements are 16-SSOP RS-232 transceivers with two drivers, two receivers, a 3.3 V-compatible supply, and a comparable pin arrangement. Suitable candidates include SP3232EUCY-L/TR, SP3232EUEY-L/TR, MAX3232EESE, ADM3202ARUR, and ST3232BEYR, subject to confirmation of pin functions, capacitor requirements, and operating ratings before substitution.
Is SP3232EUCA-L suitable for a 1000 kbps RS-232 link?
Yes, SP3232EUCA-L is rated for data transmission rates up to 1000 kbps. The MaxLinear SP3232EU family is positioned for high-speed RS-232 applications in portable and handheld equipment. Communication reliability at that rate must still be validated with the intended cable length, connector, grounding arrangement, and remote device.
When should I choose SP3232EUCA-L over MAX3232EESE?
Choose SP3232EUCA-L when the design specifically targets the MaxLinear SP3232EU feature set, including two drivers, two receivers, 3.3 V operation, 1000 kbps signaling, and 0.1 µF charge-pump capacitors. MAX3232EESE may suit a different 16-SSOP design, but its charge-pump capacitor values and pin functions should be checked against the existing schematic.
SP3232EUCA-L vs SP3232EUCY-L/TR — which is better for a new design?
SP3232EUCA-L is the tube-packaging ordering form, while SP3232EUCY-L/TR is a tape-and-reel ordering form within the related SP3232EU family. For electrical and PCB selection, the deciding factors are the common 16-SSOP footprint, 3.3 V operation, two-channel transceiver configuration, and 1000 kbps data rate. The required assembly packaging should determine the final ordering choice.
What is the best MaxLinear equivalent for SP3232EUCA-L?
The most direct MaxLinear-family choices are the SP3232EU variants offered in the same 16-SSOP footprint and tape-and-reel ordering form. SP3232EUCY-L/TR and SP3232EUEY-L/TR can be evaluated as drop-in candidates when their exact pin assignments and ordering parameters match. Confirm the target manufacturer datasheet revision and suffix-specific details before production release.
Is SP3232EUCA-L the same as ADM3202ARUR?
SP3232EUCA-L and ADM3202ARUR are both presented as 16-SSOP, 2/2 RS-232 transceiver solutions, but they are not identical products from the same manufacturer. Their internal charge-pump capacitor requirements, electrical limits, and pin details must be compared against the schematic and PCB footprint. Use the manufacturer data for the exact ordering code in a substitution.
Where can I buy SP3232EUCA-L and check its lead time?
Use the Request a Quote form on this page to request SP3232EUCA-L pricing, current availability, minimum order quantity, and lead time. The inquiry can specify the required 16-SSOP tube packaging and quantity, allowing the order to be matched to the exact SP3232EUCA-L ordering code rather than a related tape-and-reel variant.
Is SP3232EUCA-L in stock?
Current SP3232EUCA-L stock should be confirmed through the Request a Quote form on this page. Provide the required quantity and specify whether the tube-packaged SP3232EUCA-L ordering code is mandatory. Do not substitute SP3232EUCA-L/TR when assembly process or packaging requirements differ, even though both variants use the same 16-SSOP family.
How much does SP3232EUCA-L cost?
The current unit price for SP3232EUCA-L is returned through the Request a Quote form on this page. Submit the required quantity and clarify whether the tube-packaged ordering code is acceptable so the quote reflects the exact component and packaging configuration. Pricing is refreshed through this request process rather than stated as a fixed catalog value.

এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা SP3232EUCA-L — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।

নির্বাচন গাইড

Choose SP3232EUCA-L when the design needs two RS-232 drivers and two receivers, operates from 3.3 V, and benefits from a documented 1000 kbps rate and 0.1 µF charge-pump capacitors in a 16-SSOP footprint. Select SP3232EUCY-L/TR or SP3232EUEY-L/TR when the electrical function is suitable but the assembly process requires tape-and-reel packaging. Consider MAX3232EESE, ADM3202ARUR, or ST3232BEYR for cross-brand sourcing, but compare the exact pin assignments, charge-pump capacitor values, supply limits, receiver thresholds, and package drawings before replacing the MaxLinear device. SP3232EUCA-L is specifically the tube-packaged ordering form, so do not choose a tape-and-reel alternative when the requested assembly packaging is fixed.

বিকল্পের সাথে তুলনা

পারামিটার এই পণ্য SP3232EUCY-L/TR SP3232EUEY-L/TR MAX3232EESE ADM3202ARUR ST3232BEYR
Package 16-SSOP 16-SSOP 16-SSOP 16-SSOP 16-SSOP 16-SSOP
Brand MaxLinear MaxLinear MaxLinear Analog Devices Analog Devices STMicroelectronics
Transceiver Configuration 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers 2 drivers and 2 receivers
Interface Standard RS-232 RS-232 RS-232 RS-232 RS-232 RS-232
Maximum Data Rate 1000 kbps 1000 kbps 1000 kbps 1000 kbps 1000 kbps 1000 kbps

মূল পার্থক্যসমূহ

  • Provides two RS-232 channels in a compact surface-mount package (বনামMAX3221IPWR)
  • Supports high-speed RS-232 signaling (বনামADM3202ARUR)
  • Uses compact charge-pump capacitors in 3.3 V systems (বনামST3232BEYR)

ডিজাইন নোট

Place the charge-pump capacitors and the associated receiver-network components directly beside their SP3232EUCA-L pins. The MaxLinear SP3232EU product information identifies 0.1 µF capacitors for 3.3 V operation, so the footprint should follow the exact capacitor arrangement in the manufacturer layout. Keep the traces short and provide a continuous ground reference beneath the interface section to minimize supply disturbance and improve return-current control.

Do not assume that a nominal 1000 kbps data rate guarantees reliable communication over every RS-232 cable. Check the cable length, conductor characteristics, connector wiring, signal-ground connection, and remote-device timing. The two transmitters and two receivers also do not automatically create two independent full-duplex ports; verify the transceiver enable and shutdown behavior and the intended sharing of each driver and receiver.

Keep the RS-232 traces away from switching nodes, high-current inductors, clocks, and sensitive analog inputs. Route the interface ground carefully to avoid sharing paths that carry large return currents. When the connector is exposed to user-accessible cabling, add protection at the connector boundary and select protection components that do not distort receiver operation or driver rise and fall times.

কমপ্লায়েন্স তথ্য

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
লিড ফ্রি
Unknown
হ্যালোজেন ফ্রি
Unknown
কনফ্লিক্ট মিনারেলস
Unknown

No explicit compliance certification for the exact SP3232EUCA-L ordering code was identified. AEC-Q100 is not applicable because this is an RS-232 interface IC rather than an automotive-qualified device.

ডেটা যাচাই করা হয়েছে: 2026-11-14 — ডেটা XAIPART-এর কম্পোনেন্ট ইঞ্জিনিয়ারিং টিম দ্বারা যাচাই ও কিউরেট করা হয়েছে

সম্পর্কিত অনুসন্ধান

SP3232EUCA-L datasheet SP3232EUCA-L pinout SP3232EUCA-L datasheet pdf SP3232EUCA-L 16-SSOP SP3232EUCA-L 3.3V RS-232 SP3232EUCA-L 1000 kbps SP3232EUCA-L equivalent SP3232EUCA-L replacement SP3232EUCA-L cross reference SP3232EUCA-L vs MAX3232EESE SP3232EUCA-L footprint MaxLinear SP3232EUCA-L SP3232EUCA-L application circuit SP3232EUCA-L price SP3232EUCA-L stock

সম্পর্কিত কম্পোনেন্ট ও শর্তাবলী

MaxLinear SP3232EUCA-L SP3232EU SP3232EUCY-L/TR SP3232EUEY-L/TR MAX3232EESE ADM3202ARUR ST3232BEYR RS-232 RS-232 transceiver line driver line receiver interface IC semiconductor 3.3 V supply 1000 kbps integrated charge pump 0.1 µF capacitor 16-SSOP SSOP family surface-mount package RoHS REACH portable equipment industrial serial adapter
তাৎক্ষণিক বিলওয়াছে রেকোজিউইট
সম্পূর্ণ বিবরণ পূরণ করুন — আমাদের সেলস টিম 24 ঘণ্টার মধ্যে উত্তর দেবে
পার্ট নম্বর উৎপাদক প্যাকেজ QTY লক্ষ্যমূল্য প্রসারিত
✓
বিল প্রস্তুত করা হয়েছে!

আমরা ২৪ ঘণ্টার মধ্যে আপনার ইমেইলে প্রত্যুত্তর দেব

1
RFQ জমা হয়েছে
2
কোটেশন পাওয়া গেছে
3
অর্ডার দেওয়া হয়েছে
4
পেমেন্ট
5
শিপ করা হয়েছে
6
ডেলিভারি হয়েছে
RFQ বিবরণ দেখুন