STM32F413VGT3 - 100MHz Cortex-M4 1MB MCU | STMicroelectronics
MPN: STM32F413VGT3 ✓ সক্রিয়STM32F413VGT3 সারাংশ
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces onto one device. The STM32F413VGT3 uses a 32-bit RISC architecture to execute control and signal-processing tasks. Within the product hierarchy, it can be described as an Arm Cortex-M4 MCU, a 32-bit microcontroller, an embedded processor, and a semiconductor designed for real-time embedded systems.
The headline configuration is a 100 MHz Arm Cortex-M4 processor, 1 MB of Flash memory, and a 100-LQFP package. The device also includes DSP instructions and an FPU according to the manufacturer’s product description. Its 81 I/O positions make it suitable for systems that need multiple control signals, communication ports, analog interfaces, and debug or clock connections without moving to a larger package.
The STM32F413xG/H family combines high processing speed with extensive peripheral integration for embedded control. Firmware can use the DSP and FPU resources for filtering, control calculations, and other floating-point workloads, while the Flash capacity supports a more substantial application code and configuration image than smaller microcontroller variants. The exact peripheral configuration, voltage limits, memory-map details, and electrical operating limits should be confirmed in the manufacturer datasheet before schematic sign-off.
Typical applications include industrial monitoring, connected sensor nodes, motor and motion-control equipment, medical instrumentation, consumer interfaces, and compact embedded gateways. The 100-pin package is especially useful when a design requires more I/O capacity than a 48-pin or 64-pin MCU provides. It also suits mixed-signal products where digital control, serial communications, timers, and analog functions must coexist on one board.
For new hardware, preserve the package footprint and verify every power, ground, debug, clock, and peripheral connection against the STM32F413xG/H datasheet. Boot configuration, clock planning, decoupling, and firmware support for the selected peripherals are critical to a reliable design. A working prototype should also be tested across the intended supply voltage and ambient-temperature range.
This page combines the manufacturer family specifications, package information, drop-in ordering variants, application guidance, and practical design considerations into a concise engineering reference for evaluating the STM32F413VGT3 on an embedded-control board.
এর জন্য ড্রপ-ইন বিকল্প STM32F413VGT3 — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible STM32F413VGT3 (একই form factor এবং footprint) — পার্থক্য রয়েছে Core, Flash Memory, Package.
STM32F413VGT6
✅ ড্রপ-ইনমূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →STM32F413VHT6
✅ ড্রপ-ইন📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
STM32F413VGT7
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
STM32F413VHT3
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
STM32F413VGH6
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →STM32F413VGT3 সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 32-bit Arm Cortex-M4 microcontroller |
| Manufacturer | STMicroelectronics |
| Core | Arm Cortex-M4 with DSP and FPU |
| Maximum CPU Frequency | 100 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Architecture | 32-bit RISC |
| I/O Count | 81 I/O |
| সাপ্লাই ভোল্টেজ | 3.3 V |
| প্যাকেজ | 100-pin LQFP |
| Package Dimensions | 14 x 14 mm |
| মাউন্টিং টাইপ | Surface mount |
| Product Line | STM32F4 high-performance access line |
| Instruction Set | Arm Cortex-M4 with DSP and FPU |
STM32F413VGT3 14 x 14 mm পিন কনফিগারেশন গাইড
STM32F413VGT3 (14 x 14 mm প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি STM32F413VGT3.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
STM32F413VGT3 এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Monitoring and Control, Connected Sensor Node, Motor and Motion Control, Medical Instrument Controller, Industrial Communication Gateway, Consumer Interface Controller.
Industrial Monitoring and Control
The STM32F413VGT3 fits industrial monitoring equipment that must combine sensor conditioning, local logic, communications, and control outputs on one board. Its 100 MHz Arm Cortex-M4 core provides headroom for filtering and real-time control calculations, while the DSP and FPU features support numeric workloads that would burden a simpler microcontroller. The 1 MB Flash capacity is useful for application firmware, configuration data, and diagnostic routines. With 81 I/O positions in a 14 x 14 mm LQFP package, the device can support digital inputs, outputs, communication peripherals, and local status indication without an external GPIO expander. The manufacturer datasheet should determine the final peripheral assignment and operating limits.
সুপারিশকৃত
Connected Sensor Node
The STM32F413VGT3 is suitable for connected sensor nodes that combine local sensing, data conditioning, network communication, and configuration storage. Its 32-bit Cortex-M4 architecture can process measurements while servicing serial interfaces and protocol tasks, and the 1 MB Flash provides room for firmware updates and application parameters. The 100-pin LQFP package offers more peripheral and general-purpose I/O than compact 32-pin or 48-pin devices, which can simplify board partitioning around power, communications, and status controls. The DSP and FPU resources are valuable for digital filtering and sensor-fusion calculations. Firmware should be validated against the device’s documented clock tree and peripheral mix before field deployment.
সুপারিশকৃত
Motor and Motion Control
The STM32F413VGT3 supports compact motor-control and motion-control designs where fast computation, multiple control signals, and communication are required. Its 100 MHz Cortex-M4 core and DSP/FPU capabilities suit filtering, proportional-integral-derivative control, and trajectory-related calculations, while the 1 MB Flash can hold motor parameters and control software. The 81 available I/O positions provide room for pulse-width-modulated outputs, capture inputs, position sensors, fault signals, and external communication. The 14 x 14 mm LQFP package is larger than the smallest MCUs but offers a practical pin count for mixed power and control circuitry. Validate pin multiplexing, timer resources, and shutdown behavior in the manufacturer datasheet and reference firmware.
সুপারিশকৃত
Medical Instrument Controller
The STM32F413VGT3 can serve as the main controller in compact medical and laboratory instruments that coordinate user interfaces, sensors, pumps, data logging, and service communications. The 100 MHz Cortex-M4 core supports responsive control loops, and its DSP and floating-point capabilities help implement digital filtering and calibration routines. With 1 MB Flash, the device can consolidate control firmware and nonvolatile configuration data while retaining space for diagnostics. The 100-pin LQFP package provides 81 I/O positions for isolated digital interfaces, analog-control signals, status LEDs, and communications. Compliance for a finished medical product must be established at the system level; the MCU’s exact temperature grade, electrical limits, and available qualification options must be checked before selection.
সুপারিশকৃত
Industrial Communication Gateway
The STM32F413VGT3 is well suited to a compact protocol-conversion gateway that must bridge several serial interfaces while maintaining deterministic control performance. Its 32-bit Cortex-M4 core runs up to 100 MHz, leaving processing capacity for buffering, protocol translation, logging, and supervisory logic. The 1 MB Flash capacity supports larger protocol stacks and configuration, while the 100-pin LQFP footprint provides more interface and routing flexibility than low-pin-count MCUs. The DSP and FPU can assist with payload transformation or monitoring algorithms. A practical design should allocate pins according to the manufacturer peripheral table, isolate communications appropriately, and verify timing, electrical levels, and firmware drivers for every protocol used in the gateway.
সুপারিশকৃত
Consumer Interface Controller
The STM32F413VGT3 can serve as the central controller in consumer equipment requiring several buttons, indicators, displays, communications, and local data processing. Its 100 MHz Cortex-M4 core provides responsive user-interface handling, while 1 MB Flash supports richer firmware and graphical resources than many entry-level MCUs. The 81 I/O positions allow a product designer to connect display controls, touch inputs, status LEDs, and serial accessories directly. DSP and floating-point instructions can support audio filtering, motor effects, or signal shaping where required. Because the LQFP package exposes more pins than compact designs, it is a useful choice when external connectors and mixed signal routing matter more than minimum board area. Final compatibility must be checked using the official pin and electrical tables.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা STM32F413VGT3 — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | STM32F413VGT6 | STM32F413VHT6 | STM32F413VGT7 | STM32F413VHT3 | STM32F413VGH6 |
|---|---|---|---|---|---|---|
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Memory | 1 MB (1M x 8) | 1 MB | 256 KB | 1 MB | 256 KB | 1 MB |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| DSP and FPU Support | Yes | Yes | Yes | Yes | Yes | Yes |
| Product Line | STM32F4 high-performance access line | STM32F4 high-performance access line | STM32F4 high-performance access line | STM32F4 high-performance access line | STM32F4 high-performance access line | STM32F4 high-performance access line |
মূল পার্থক্যসমূহ
- Higher Flash density than H-coded package alternatives (বনামSTM32F413VHT3)
- Same core speed across the listed STM32F413 family alternatives (বনামSTM32F413VGT6)
- Large I/O count in a compact 14 x 14 mm package (বনামSTM32F413VHT6)
ডিজাইন নোট
Assign the LQFP-100 footprint directly from the STM32F413xG STM32F413xH package drawing and verify pad dimensions, pin-1 orientation, and solderable land geometry before PCB release. Place the decoupling network close to each applicable power pin, connect all required ground pins, and reserve the SWD programming and debug connections. Because the device exposes many pins in a compact 14 x 14 mm body, use careful fan-out routing and adequate thermal-relief geometry rather than manually adapting a generic 100-pin library footprint.
Power the device from the supply range specified for the exact STM32F413VGT3 orderable variant, and account for transient current during startup, Flash operations, and high-speed peripheral activity. Follow the manufacturer datasheet and reference design for decoupling values, supply-impedance limits, power sequencing, and reset requirements. Do not infer a broader voltage range from the 3.3 V order listing; the 3.3 V condition and all operating limits should be checked against the electrical-characteristics tables.
Keep clock, high-speed serial, and sensitive analog signals away from noisy switching nodes and return paths. Route SWD signals for programming and debug access without long unprotected branches, and provide test points for power, reset, and clock diagnosis. Where communication rates are high, use continuous reference planes, controlled impedance routing, and short return paths. Validate the final board with signal-integrity and EMC testing because the 100-pin package can make peripheral assignment and connector placement more crowded than in smaller MCUs.
Do not select an H-coded replacement solely because it fits the same LQFP-100 footprint: the 256 KB Flash option is 75% smaller than the STM32F413VGT3 configuration and may not hold the existing firmware or data. Likewise, changing a temperature suffix can alter the acceptable ambient range even when the core and Flash match. Review the device-type definition, pin table, clock limits, peripheral set, and qualification requirement for every proposed substitution before approving a hardware change.
কমপ্লায়েন্স তথ্য
Compliance attributes require confirmation from the manufacturer’s orderable-part or environmental documentation.
