STM32F413VGT3 - 100MHz Cortex-M4 1MB MCU | STMicroelectronics
MPN: STM32F413VGT3 ✓ Hoạt độngSTM32F413VGT3 Tóm tắt
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, peripherals, and communication interfaces onto one device. The STM32F413VGT3 uses a 32-bit RISC architecture to execute control and signal-processing tasks. Within the product hierarchy, it can be described as an Arm Cortex-M4 MCU, a 32-bit microcontroller, an embedded processor, and a semiconductor designed for real-time embedded systems.
The headline configuration is a 100 MHz Arm Cortex-M4 processor, 1 MB of Flash memory, and a 100-LQFP package. The device also includes DSP instructions and an FPU according to the manufacturer’s product description. Its 81 I/O positions make it suitable for systems that need multiple control signals, communication ports, analog interfaces, and debug or clock connections without moving to a larger package.
The STM32F413xG/H family combines high processing speed with extensive peripheral integration for embedded control. Firmware can use the DSP and FPU resources for filtering, control calculations, and other floating-point workloads, while the Flash capacity supports a more substantial application code and configuration image than smaller microcontroller variants. The exact peripheral configuration, voltage limits, memory-map details, and electrical operating limits should be confirmed in the manufacturer datasheet before schematic sign-off.
Typical applications include industrial monitoring, connected sensor nodes, motor and motion-control equipment, medical instrumentation, consumer interfaces, and compact embedded gateways. The 100-pin package is especially useful when a design requires more I/O capacity than a 48-pin or 64-pin MCU provides. It also suits mixed-signal products where digital control, serial communications, timers, and analog functions must coexist on one board.
For new hardware, preserve the package footprint and verify every power, ground, debug, clock, and peripheral connection against the STM32F413xG/H datasheet. Boot configuration, clock planning, decoupling, and firmware support for the selected peripherals are critical to a reliable design. A working prototype should also be tested across the intended supply voltage and ambient-temperature range.
This page combines the manufacturer family specifications, package information, drop-in ordering variants, application guidance, and practical design considerations into a concise engineering reference for evaluating the STM32F413VGT3 on an embedded-control board.
Bộ thay thế dễ dàng lắp đặt cho STM32F413VGT3 — cùng gói, chân-to-chân tương thích. Các bộ phận yêu cầu hàn PCB bị loại trừ.
Các biến thể trong loạt này
Các mẫu cùng loạt có thể lắp đặt dễ dàng tương thích với STM32F413VGT3 (cùng hình factor và footprint) — khác nhau ở Core, Flash Memory, Package.
STM32F413VGT6
✅ Drop-InLiên hệ để biết giá
Xem tài liệu →STM32F413VHT6
✅ Drop-In📋 Tham chiếu thay thế (không có trong danh mục)
STM32F413VGT7
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32F413VHT3
✅ Drop-In ⚠️ Thông số chưa được xác minh📋 Tham chiếu thay thế (không có trong danh mục)
STM32F413VGH6
✅ Drop-In ⚠️ Thông số chưa được xác minhLiên hệ để biết giá
Xem tài liệu →STM32F413VGT3 Tỷ lệ tối đa & tính chất điện
| Product Type | 32-bit Arm Cortex-M4 microcontroller |
| Manufacturer | STMicroelectronics |
| Core | Arm Cortex-M4 with DSP and FPU |
| Maximum CPU Frequency | 100 MHz |
| Flash Memory | 1 MB (1M x 8) |
| Architecture | 32-bit RISC |
| I/O Count | 81 I/O |
| Điện áp cung cấp | 3.3 V |
| Hộp | 100-pin LQFP |
| Package Dimensions | 14 x 14 mm |
| Kiểu lắp đặt | Surface mount |
| Product Line | STM32F4 high-performance access line |
| Instruction Set | Arm Cortex-M4 with DSP and FPU |
Hướng dẫn cấu hình chân STM32F413VGT3 14 x 14 mm
Cấu hình chân cho STM32F413VGT3 (14 x 14 mm gói). IC số này bao gồm chân GPIO, giao diện truyền thông (UART, SPI, I2C) và chân nguồn. Tham khảo tài liệu thông số kỹ thuật của nhà sản xuất để biết các chức năng chân thay thế và tùy chọn cấu hình. Cực kỳ quan trọng cho thiết kế hệ thống tích hợp và lập trình PCB.
Không có dữ liệu chân cụ thể sẵn có cho STM32F413VGT3.
Tham khảo: tài liệu kỹ thuật cho cấu hình chân đầy đủ.
Ứng dụng tiêu biểu
STM32F413VGT3 phù hợp cho 6 Áp dụngs: Industrial Monitoring and Control, Connected Sensor Node, Motor and Motion Control, Medical Instrument Controller, Industrial Communication Gateway, Consumer Interface Controller.
Industrial Monitoring and Control
The STM32F413VGT3 fits industrial monitoring equipment that must combine sensor conditioning, local logic, communications, and control outputs on one board. Its 100 MHz Arm Cortex-M4 core provides headroom for filtering and real-time control calculations, while the DSP and FPU features support numeric workloads that would burden a simpler microcontroller. The 1 MB Flash capacity is useful for application firmware, configuration data, and diagnostic routines. With 81 I/O positions in a 14 x 14 mm LQFP package, the device can support digital inputs, outputs, communication peripherals, and local status indication without an external GPIO expander. The manufacturer datasheet should determine the final peripheral assignment and operating limits.
Được đề xuất
Connected Sensor Node
The STM32F413VGT3 is suitable for connected sensor nodes that combine local sensing, data conditioning, network communication, and configuration storage. Its 32-bit Cortex-M4 architecture can process measurements while servicing serial interfaces and protocol tasks, and the 1 MB Flash provides room for firmware updates and application parameters. The 100-pin LQFP package offers more peripheral and general-purpose I/O than compact 32-pin or 48-pin devices, which can simplify board partitioning around power, communications, and status controls. The DSP and FPU resources are valuable for digital filtering and sensor-fusion calculations. Firmware should be validated against the device’s documented clock tree and peripheral mix before field deployment.
Được đề xuất
Motor and Motion Control
The STM32F413VGT3 supports compact motor-control and motion-control designs where fast computation, multiple control signals, and communication are required. Its 100 MHz Cortex-M4 core and DSP/FPU capabilities suit filtering, proportional-integral-derivative control, and trajectory-related calculations, while the 1 MB Flash can hold motor parameters and control software. The 81 available I/O positions provide room for pulse-width-modulated outputs, capture inputs, position sensors, fault signals, and external communication. The 14 x 14 mm LQFP package is larger than the smallest MCUs but offers a practical pin count for mixed power and control circuitry. Validate pin multiplexing, timer resources, and shutdown behavior in the manufacturer datasheet and reference firmware.
Được đề xuất
Medical Instrument Controller
The STM32F413VGT3 can serve as the main controller in compact medical and laboratory instruments that coordinate user interfaces, sensors, pumps, data logging, and service communications. The 100 MHz Cortex-M4 core supports responsive control loops, and its DSP and floating-point capabilities help implement digital filtering and calibration routines. With 1 MB Flash, the device can consolidate control firmware and nonvolatile configuration data while retaining space for diagnostics. The 100-pin LQFP package provides 81 I/O positions for isolated digital interfaces, analog-control signals, status LEDs, and communications. Compliance for a finished medical product must be established at the system level; the MCU’s exact temperature grade, electrical limits, and available qualification options must be checked before selection.
Được đề xuất
Industrial Communication Gateway
The STM32F413VGT3 is well suited to a compact protocol-conversion gateway that must bridge several serial interfaces while maintaining deterministic control performance. Its 32-bit Cortex-M4 core runs up to 100 MHz, leaving processing capacity for buffering, protocol translation, logging, and supervisory logic. The 1 MB Flash capacity supports larger protocol stacks and configuration, while the 100-pin LQFP footprint provides more interface and routing flexibility than low-pin-count MCUs. The DSP and FPU can assist with payload transformation or monitoring algorithms. A practical design should allocate pins according to the manufacturer peripheral table, isolate communications appropriately, and verify timing, electrical levels, and firmware drivers for every protocol used in the gateway.
Được đề xuất
Consumer Interface Controller
The STM32F413VGT3 can serve as the central controller in consumer equipment requiring several buttons, indicators, displays, communications, and local data processing. Its 100 MHz Cortex-M4 core provides responsive user-interface handling, while 1 MB Flash supports richer firmware and graphical resources than many entry-level MCUs. The 81 I/O positions allow a product designer to connect display controls, touch inputs, status LEDs, and serial accessories directly. DSP and floating-point instructions can support audio filtering, motor effects, or signal shaping where required. Because the LQFP package exposes more pins than compact designs, it is a useful choice when external connectors and mixed signal routing matter more than minimum board area. Final compatibility must be checked using the official pin and electrical tables.
Được đề xuất
Tóm tắt các sản phẩm được đề xuất
Dữ liệu tham khảo kỹ thuật cho STM32F413VGT3 — so sánh, hướng dẫn thiết kế và thông tin tuân thủ.
Hướng dẫn chọn lựa
So sánh với các sản phẩm thay thế
| Tham số | Sản phẩm này | STM32F413VGT6 | STM32F413VHT6 | STM32F413VGT7 | STM32F413VHT3 | STM32F413VGH6 |
|---|---|---|---|---|---|---|
| Package | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) | 100-pin LQFP (14 x 14 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum Frequency | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz | 100 MHz |
| Flash Memory | 1 MB (1M x 8) | 1 MB | 256 KB | 1 MB | 256 KB | 1 MB |
| Architecture | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC | 32-bit RISC |
| DSP and FPU Support | Yes | Yes | Yes | Yes | Yes | Yes |
| Product Line | STM32F4 high-performance access line | STM32F4 high-performance access line | STM32F4 high-performance access line | STM32F4 high-performance access line | STM32F4 high-performance access line | STM32F4 high-performance access line |
Bảo phân biệt quan trọng
- Higher Flash density than H-coded package alternatives (vsSTM32F413VHT3)
- Same core speed across the listed STM32F413 family alternatives (vsSTM32F413VGT6)
- Large I/O count in a compact 14 x 14 mm package (vsSTM32F413VHT6)
Ghi chú thiết kế
Assign the LQFP-100 footprint directly from the STM32F413xG STM32F413xH package drawing and verify pad dimensions, pin-1 orientation, and solderable land geometry before PCB release. Place the decoupling network close to each applicable power pin, connect all required ground pins, and reserve the SWD programming and debug connections. Because the device exposes many pins in a compact 14 x 14 mm body, use careful fan-out routing and adequate thermal-relief geometry rather than manually adapting a generic 100-pin library footprint.
Power the device from the supply range specified for the exact STM32F413VGT3 orderable variant, and account for transient current during startup, Flash operations, and high-speed peripheral activity. Follow the manufacturer datasheet and reference design for decoupling values, supply-impedance limits, power sequencing, and reset requirements. Do not infer a broader voltage range from the 3.3 V order listing; the 3.3 V condition and all operating limits should be checked against the electrical-characteristics tables.
Keep clock, high-speed serial, and sensitive analog signals away from noisy switching nodes and return paths. Route SWD signals for programming and debug access without long unprotected branches, and provide test points for power, reset, and clock diagnosis. Where communication rates are high, use continuous reference planes, controlled impedance routing, and short return paths. Validate the final board with signal-integrity and EMC testing because the 100-pin package can make peripheral assignment and connector placement more crowded than in smaller MCUs.
Do not select an H-coded replacement solely because it fits the same LQFP-100 footprint: the 256 KB Flash option is 75% smaller than the STM32F413VGT3 configuration and may not hold the existing firmware or data. Likewise, changing a temperature suffix can alter the acceptable ambient range even when the core and Flash match. Review the device-type definition, pin table, clock limits, peripheral set, and qualification requirement for every proposed substitution before approving a hardware change.
Thông tin tuân thủ
Compliance attributes require confirmation from the manufacturer’s orderable-part or environmental documentation.
