STM32G473MEY6TR - 170MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics
MPN: STM32G473MEY6TR ✓ সক্রিয়STM32G473MEY6TR সারাংশ
A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals such as timers, communication interfaces, analog converters, and digital I/O. Within the STM32G4 hierarchy, the STM32G473MEY6TR combines a Cortex-M4 core, mixed-signal processing, and fast control-loop peripherals for industrial, automotive, and consumer equipment. Its 32-bit architecture supports efficient digital signal processing and connected-control workloads.
Key features include a 170 MHz operating frequency, 512 KB of flash memory, an integrated math accelerator for faster arithmetic operations, and a high analog feature set. The device supports 1.8 V, 2.5 V, and 3.3 V supply configurations identified for this ordering code. Its compact 81-WLCSP package reduces board footprint while exposing a large pin count for high-speed interfaces and mixed-signal routing.
The Cortex-M4 processor architecture provides a balanced combination of general-purpose control, DSP instructions, and efficient interrupt handling. The math accelerator offloads common mathematical operations from the main core, improving performance in filtering, control, and signal-conditioning applications. The STM32G4 family is designed for applications where accurate conversion, fast control updates, and compact embedded processing are needed in the same design.
Typical applications include industrial motor controllers, digital power converters, sensor-hub and condition-monitoring equipment, high-performance audio signal chains, smart industrial sensors, and compact consumer control boards. The small WLCSP footprint is especially useful where component density, analog routing, and short signal paths are important.
Board design should preserve clean analog and digital separation, provide low-impedance supply and ground distribution, and follow the manufacturer's WLCSP land-pattern and assembly recommendations. Keep sensitive analog inputs away from high-current switching paths, and validate the decoupling network against the clock and analog operating requirements described in the manufacturer datasheet.
This page consolidates verified device specifications, package details, practical design guidance, and engineering-focused alternative comparisons. It is intended to help engineers evaluate sourcing, footprint compatibility, firmware continuity, and analog-control suitability before committing the STM32G473MEY6TR to a new design.
এর জন্য ড্রপ-ইন বিকল্প STM32G473MEY6TR — একই package, pin-to-pin compatible। ভিন্ন package-এর যেসব পার্টে PCB rework প্রয়োজন সেগুলো বাদ দেওয়া হয়েছে।
এই সিরিজের ভ্যারিয়েন্ট
একই সিরিজের মডেল যেগুলো drop-in compatible STM32G473MEY6TR (একই form factor এবং footprint) — পার্থক্য রয়েছে Math Accelerator, Product Type, Flash Memory, ADC Resolution, Architecture.
STM32G474MEY6TR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →STM32G484MEY6TR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়মূল্যের জন্য যোগাযোগ করুন
ডেটাশিট দেখুন →STM32G491MEY6TR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
STM32G441MEY6TR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
STM32G431MEY6TR
✅ ড্রপ-ইন ⚠️ স্পেক যাচাইকৃত নয়📋 রেফারেন্স বিকল্প (ক্যাটালগে নেই)
STM32G473MEY6TR সর্বোচ্চ রেটিং ও বৈদ্যুতিক বৈশিষ্ট্য
| Product Type | 32-bit ARM Cortex-M4 microcontroller |
| Core | Arm Cortex-M4 |
| Architecture | 32-bit RISC |
| সর্বোচ্চ ক্লক ফ্রিকোয়েন্সি | 170 MHz |
| Flash Memory | 512 KB (512K x 8) |
| Math Accelerator | Integrated |
| Supply Voltage Options | 1.8 V / 2.5 V / 3.3 V |
| প্যাকেজ | 81-WLCSP (4.02 mm x 4.27 mm) |
| Package Type | WLCSP |
| পিন সংখ্যা | 81 pins |
| মাউন্টিং টাইপ | Surface mount |
| Microcontroller Series | STM32G4 |
| Series Positioning | High analog capability |
| CPU Bit Width | 32 bit |
| Program Memory Type | Flash |
| RoHS Compliance | unknown |
| REACH Compliance | unknown |
| AEC-Q100 Qualification | not_applicable |
STM32G473MEY6TR wlcsp পিন কনফিগারেশন গাইড
STM32G473MEY6TR (wlcsp প্যাকেজ)-এর পিন কনফিগারেশন। এই ডিজিটাল IC-তে GPIO, কমিউনিকেশন ইন্টারফেস (UART, SPI, I2C) এবং পাওয়ার পিন রয়েছে। বিকল্প পিন ফাংশন ও কনফিগারেশন অপশনের জন্য প্রস্তুতকারকের ডেটাশিট দেখুন। এমবেডেড সিস্টেম ডিজাইন ও PCB লেআউটের জন্য অপরিহার্য।
এর জন্য বিস্তারিত পিনআউট ডেটা পাওয়া যায়নি STM32G473MEY6TR.
দেখুন ডেটাশিট সম্পূর্ণ পিন কনফিগারেশনের জন্য।
সাধারণ ব্যবহার
STM32G473MEY6TR এর জন্য উপযুক্ত 6 অ্যাপ্লিকেশনs: Industrial Motor Control, Digital Power Conversion, Precision Sensor Hubs, Condition Monitoring Equipment, High-Performance Audio Control, Compact Connected Control Boards.
Industrial Motor Control
The STM32G473MEY6TR is well suited to compact field-oriented motor controllers because its 170 MHz Cortex-M4 core provides fast loop execution while the math accelerator reduces the burden of transformations, filtering, and control calculations. The high analog feature set supports current, voltage, and position sensing stages that are central to closed-loop motor control. Placing the MCU in an 81-WLCSP also helps minimize control-board area, although careful power grounding and analog partitioning remain essential. Confirm timer, ADC, and pin multiplexing requirements against the selected family member before finalizing the PCB.
সুপারিশকৃত
Digital Power Conversion
The STM32G473MEY6TR can serve as the control engine in a digital power converter where a 170 MHz processor and integrated math accelerator accelerate compensation, current control, and fault-handling routines. Its analog-oriented feature set is valuable when the design must monitor input voltage, output voltage, and inductor current with tightly controlled sampling timing. The 512 KB of flash provides ample room for control code, parameter tables, and a bootloader. Use the manufacturer reference architecture to determine converter-channel assignments and sampling-point timing rather than assuming pins are interchangeable across STM32G4 variants.
সুপারিশকৃত
Precision Sensor Hubs
The STM32G473MEY6TR fits compact sensor-hub designs that combine multiple analog measurements with local filtering, diagnostics, and digital data processing. Its Cortex-M4 instruction set and 170 MHz clock support efficient digital signal processing, while the math accelerator accelerates common numerical operations used in compensation and calibration. The 81-WLCSP package allows the controller to sit close to sensors and reduces interconnect length, which can improve signal integrity. Partition analog inputs and references away from switching nodes, and use the device's high-performance analog capabilities only after validating converter noise and settling requirements.
সুপারিশকৃত
Condition Monitoring Equipment
The STM32G473MEY6TR can act as the central processor in vibration, temperature, or current monitoring equipment where multiple analog inputs must be sampled and processed with predictable timing. Its 170 MHz Cortex-M4 core and integrated math accelerator support digital filtering and envelope analysis while the 512 KB flash capacity accommodates application firmware and diagnostic data structures. The compact 81-WLCSP footprint is advantageous for handheld or inline monitoring modules. Keep sensor excitation and conditioning circuitry physically separated from the MCU's digital supply network to reduce measurement error.
সুপারিশকৃত
High-Performance Audio Control
The STM32G473MEY6TR can handle real-time audio control tasks where a 170 MHz Cortex-M4 core executes DSP operations and the math accelerator improves arithmetic throughput. It is appropriate for active speaker control, soundbar chassis control, or audio signal monitoring where low-latency processing and mixed-signal integration are required. The compact WLCSP package supports space-constrained designs, while 512 KB of flash accommodates control code and configuration data. Use short digital return paths and controlled analog grounding, and verify the exact DAC, ADC, and timer resources needed by the STM32G4 family member selected for production.
সুপারিশকৃত
Compact Connected Control Boards
The STM32G473MEY6TR is useful in compact control boards that combine real-time sensing, local actuation, and an external communication controller. Its Cortex-M4 core handles system tasks and deterministic control loops while the 81-WLCSP footprint frees board area for power conversion or radio modules. The 512 KB of flash supports layered application and communication software, although SRAM requirements must be checked separately. Keep the MCU supply rail quiet, provide local high-frequency decoupling, and route high-current communication-module connections away from sensitive analog inputs.
সুপারিশকৃত
সুপারিশকৃত পণ্যের সারসংক্ষেপ
এর জন্য ইঞ্জিনিয়ারিং রেফারেন্স ডেটা STM32G473MEY6TR — তুলনা, ডিজাইন গাইডেন্স এবং কমপ্লায়েন্স তথ্য।
নির্বাচন গাইড
বিকল্পের সাথে তুলনা
| পারামিটার | এই পণ্য | STM32G474MEY6TR | STM32G484MEY6TR | STM32G491MEY6TR | STM32G441MEY6TR | STM32G431MEY6TR |
|---|---|---|---|---|---|---|
| Package | 81-WLCSP (4.02 mm x 4.27 mm) | 81-WLCSP (4.02 mm x 4.27 mm) | 81-WLCSP (4.02 mm x 4.27 mm) | 81-WLCSP (4.02 mm x 4.27 mm) | 81-WLCSP (4.02 mm x 4.27 mm) | 81-WLCSP (4.02 mm x 4.27 mm) |
| Brand | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics | STMicroelectronics |
| CPU Core | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 | Arm Cortex-M4 |
| Maximum Clock Frequency | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz | 170 MHz |
| Math Accelerator | Integrated | Integrated | Integrated | Integrated | Integrated | Integrated |
| Programming and Debug Ecosystem | STM32G4 Cortex-M4 ecosystem | STM32G4 Cortex-M4 ecosystem | STM32G4 Cortex-M4 ecosystem | STM32G4 Cortex-M4 ecosystem | STM32G4 Cortex-M4 ecosystem | STM32G4 Cortex-M4 ecosystem |
| Analog Feature Level | High analog | High analog family | High analog family | High analog family | High analog family | High analog family |
| Device Identification | STM32G473ME | STM32G474ME | STM32G484ME | STM32G491ME | STM32G441ME | STM32G431ME |
মূল পার্থক্যসমূহ
- Compact high-performance control in an 81-WLCSP (বনামSTM32G431MEY6TR)
- Integrated math acceleration for real-time control (বনামSTM32G441MEY6TR)
- Firmware continuity across the STM32G4 ecosystem (বনামSTM32G484MEY6TR)
ডিজাইন নোট
Decouple each supply connection close to the device and route the connections independently to the relevant ground pins. The STM32G473MEY6TR supports 1.8 V, 2.5 V, and 3.3 V configurations, but the usable set of analog and digital peripherals can vary with the selected voltage range. Confirm operating limits, internal-regulator requirements, and power-supply sequencing in the manufacturer datasheet before assigning the external supply rails. Add bulk capacitance at the board entry and local high-frequency capacitance at the WLCSP supply pins.
Preserve analog performance by separating sensitive analog inputs from digital clocks, high-current switching nodes, and inductor-current paths. Keep the MCU, analog reference network, and input-conditioning components on the same side of the board when possible, with continuous ground reference beneath the analog section. The 81-WLCSP footprint has a high pin density and short interconnect requirements, so use the manufacturer land pattern exactly and avoid improvised solder-jump or footprint changes during prototyping.
Route clock, debug, and high-speed communication signals over continuous reference planes, while keeping analog inputs short and free of test-point stubs where possible. The 170 MHz Cortex-M4 operating rate requires deterministic power and clock delivery, so check rise time, ringing, and crosstalk on critical nets with an oscilloscope. For ADC-based measurements, synchronize sampling with the timer strategy documented for the STM32G4 family and validate source impedance against the converter acquisition requirements.
Do not treat another STM32G4 ordering code as interchangeable merely because it uses a Cortex-M4 core and a similar package. Verify the exact package drawing, pin multiplexing, flash size, SRAM capacity, ADC channels, timer instances, math-accelerator support, and boot configuration before substituting a part. Because the 81-WLCSP is difficult to inspect after soldering, confirm the bill of materials and orientation marks before placement and run a continuity-oriented inspection on assembled prototypes.
কমপ্লায়েন্স তথ্য
The manufacturer product page and distributor listings do not state the requested compliance fields for this exact ordering code. Confirm RoHS, REACH, halogen-free, and conflict-minerals documentation for the STM32G473MEY6TR before incorporating the statement into a regulated bill of materials.