STMicroelectronics

STM32G473MEY6TR - 170MHz Cortex-M4 MCU, 512KB Flash | STMicroelectronics

MPN: STM32G473MEY6TR ✓ Aktif
1.8 V / 2.5 V / 3.3 V Vdss 81-WLCSP (4.02 mm x 4.27 mm) Package 170 MHz Speed 512 KB (512K x 8) Memory
MOQ: 1 |

STM32G473MEY6TR Ringkasan

The STMicroelectronics STM32G473MEY6TR is a 32-bit Arm Cortex-M4 microcontroller with a 170 MHz maximum clock, 512 KB of embedded flash, and an integrated math accelerator, packaged in an 81-pin WLCSP measuring 4.02 mm by 4.27 mm. It belongs to the STM32G4 series, combining high-resolution analog peripherals with real-time control and general-purpose microcontroller performance.

A microcontroller is a programmable system-on-chip that integrates a processor core, memory, and peripherals such as timers, communication interfaces, analog converters, and digital I/O. Within the STM32G4 hierarchy, the STM32G473MEY6TR combines a Cortex-M4 core, mixed-signal processing, and fast control-loop peripherals for industrial, automotive, and consumer equipment. Its 32-bit architecture supports efficient digital signal processing and connected-control workloads.

Key features include a 170 MHz operating frequency, 512 KB of flash memory, an integrated math accelerator for faster arithmetic operations, and a high analog feature set. The device supports 1.8 V, 2.5 V, and 3.3 V supply configurations identified for this ordering code. Its compact 81-WLCSP package reduces board footprint while exposing a large pin count for high-speed interfaces and mixed-signal routing.

The Cortex-M4 processor architecture provides a balanced combination of general-purpose control, DSP instructions, and efficient interrupt handling. The math accelerator offloads common mathematical operations from the main core, improving performance in filtering, control, and signal-conditioning applications. The STM32G4 family is designed for applications where accurate conversion, fast control updates, and compact embedded processing are needed in the same design.

Typical applications include industrial motor controllers, digital power converters, sensor-hub and condition-monitoring equipment, high-performance audio signal chains, smart industrial sensors, and compact consumer control boards. The small WLCSP footprint is especially useful where component density, analog routing, and short signal paths are important.

Board design should preserve clean analog and digital separation, provide low-impedance supply and ground distribution, and follow the manufacturer's WLCSP land-pattern and assembly recommendations. Keep sensitive analog inputs away from high-current switching paths, and validate the decoupling network against the clock and analog operating requirements described in the manufacturer datasheet.

This page consolidates verified device specifications, package details, practical design guidance, and engineering-focused alternative comparisons. It is intended to help engineers evaluate sourcing, footprint compatibility, firmware continuity, and analog-control suitability before committing the STM32G473MEY6TR to a new design.

Alternatif penggantian untuk STM32G473MEY6TR — paket yang sama, pin-pada-pin kompatibel. Bagian paket yang berbeda memerlukan kerja ulang PCB diabaikan.

Variasi di dalam seri ini

Model-series yang sama yang kompatibel dengan penggantian STM32G473MEY6TR (sama faktor bentuk dan footprint) — berbeda di dalam Math Accelerator, Product Type, Flash Memory, ADC Resolution, Architecture.

STMicroelectronics
Math Accelerator: Present
Product Type: 32-bit Arm Cortex-M4F microcontroller
Flash Memory: 512 KB
Bandingkan dengan STM32G473MEY6TR →
STMicroelectronics
Math Accelerator: Yes
Product Type: 32-bit microcontroller (MCU)
ADC Resolution: 12 bit
Bandingkan dengan STM32G473MEY6TR →

STM32G474MEY6TR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
STMicroelectronics
📦 81-WLCSP (4.02 mm x 4.27 mm)
32-bit Arm Cortex-M4F microcontroller · Arm Cortex-M4F · 170 MHz · 512 KB · 512K x 8 bits · 128 KB · 32-bit RISC with floating-point unit · 12-bit

Kontak untuk harga

Lihat Datasheet →

STM32G484MEY6TR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
STMicroelectronics
📦 81-WLCSP (4.02 mm x 4.27 mm)
32-bit microcontroller (MCU) · Arm Cortex-M4 32-bit RISC · 170 MHz · 512 KB (512K x 8) · 3.3 V · 12 bit · Yes

Kontak untuk harga

Lihat Datasheet →

STM32G491MEY6TR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 81-WLCSP (4.02 mm x 4.27 mm)
Same package and Cortex-M4 core family; different flash capacity and peripheral allocation relative to the STM32G473ME

📋 Alternatif referensi (tidak dalam katalog)

STM32G441MEY6TR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 81-WLCSP (4.02 mm x 4.27 mm)
Same 81-WLCSP footprint and STM32G4 core family; lower-memory configuration changes available code and data space

📋 Alternatif referensi (tidak dalam katalog)

STM32G431MEY6TR

✅ Drop-In ⚠️ Spesifikasi Tidak Disahkan
📦 81-WLCSP (4.02 mm x 4.27 mm)
Same 81-WLCSP footprint and Cortex-M4 architecture; reduced memory and peripheral set versus the STM32G473ME

📋 Alternatif referensi (tidak dalam katalog)

STM32G473MEY6TR Rating Maksimal & Karakteristik Listrik

Product Type 32-bit ARM Cortex-M4 microcontroller
Core Arm Cortex-M4
Architecture 32-bit RISC
Frekuensi Bawah Maximum 170 MHz
Flash Memory 512 KB (512K x 8)
Math Accelerator Integrated
Supply Voltage Options 1.8 V / 2.5 V / 3.3 V
Paket 81-WLCSP (4.02 mm x 4.27 mm)
Package Type WLCSP
Jumlah Pin 81 pins
Tipe Mounting Surface mount
Microcontroller Series STM32G4
Series Positioning High analog capability
CPU Bit Width 32 bit
Program Memory Type Flash
RoHS Compliance unknown
REACH Compliance unknown
AEC-Q100 Qualification not_applicable

STM32G473MEY6TR wlcsp Diamant Konfigurasi Panduan

Konfigurasi pin untuk STM32G473MEY6TR (wlcsp pakai pakai). IC digital ini termasuk GPIO, antarmuka komunikasi (UART, SPI, I2C), dan pin kuasa. Lihat datasheet produsen untuk fungsi pin alternatif dan opsi konfigurasi. Penting untuk desain sistem pengemasan dan PCB.

Diamant diagram pakai pakai wlcsp untuk STM32G473MEY6TR

Tidak ada data diatribut pin yang tersedia untuk STM32G473MEY6TR.

Lihat ke: datasheet produk untuk konfigurasi pin penuh.

Aplikasi Umum

STM32G473MEY6TR cocok untuk 6 aplikasis: Industrial Motor Control, Digital Power Conversion, Precision Sensor Hubs, Condition Monitoring Equipment, High-Performance Audio Control, Compact Connected Control Boards.

🏭

Industrial Motor Control

The STM32G473MEY6TR is well suited to compact field-oriented motor controllers because its 170 MHz Cortex-M4 core provides fast loop execution while the math accelerator reduces the burden of transformations, filtering, and control calculations. The high analog feature set supports current, voltage, and position sensing stages that are central to closed-loop motor control. Placing the MCU in an 81-WLCSP also helps minimize control-board area, although careful power grounding and analog partitioning remain essential. Confirm timer, ADC, and pin multiplexing requirements against the selected family member before finalizing the PCB.

⚡

Digital Power Conversion

The STM32G473MEY6TR can serve as the control engine in a digital power converter where a 170 MHz processor and integrated math accelerator accelerate compensation, current control, and fault-handling routines. Its analog-oriented feature set is valuable when the design must monitor input voltage, output voltage, and inductor current with tightly controlled sampling timing. The 512 KB of flash provides ample room for control code, parameter tables, and a bootloader. Use the manufacturer reference architecture to determine converter-channel assignments and sampling-point timing rather than assuming pins are interchangeable across STM32G4 variants.

🧩

Precision Sensor Hubs

The STM32G473MEY6TR fits compact sensor-hub designs that combine multiple analog measurements with local filtering, diagnostics, and digital data processing. Its Cortex-M4 instruction set and 170 MHz clock support efficient digital signal processing, while the math accelerator accelerates common numerical operations used in compensation and calibration. The 81-WLCSP package allows the controller to sit close to sensors and reduces interconnect length, which can improve signal integrity. Partition analog inputs and references away from switching nodes, and use the device's high-performance analog capabilities only after validating converter noise and settling requirements.

🏭

Condition Monitoring Equipment

The STM32G473MEY6TR can act as the central processor in vibration, temperature, or current monitoring equipment where multiple analog inputs must be sampled and processed with predictable timing. Its 170 MHz Cortex-M4 core and integrated math accelerator support digital filtering and envelope analysis while the 512 KB flash capacity accommodates application firmware and diagnostic data structures. The compact 81-WLCSP footprint is advantageous for handheld or inline monitoring modules. Keep sensor excitation and conditioning circuitry physically separated from the MCU's digital supply network to reduce measurement error.

🎧

High-Performance Audio Control

The STM32G473MEY6TR can handle real-time audio control tasks where a 170 MHz Cortex-M4 core executes DSP operations and the math accelerator improves arithmetic throughput. It is appropriate for active speaker control, soundbar chassis control, or audio signal monitoring where low-latency processing and mixed-signal integration are required. The compact WLCSP package supports space-constrained designs, while 512 KB of flash accommodates control code and configuration data. Use short digital return paths and controlled analog grounding, and verify the exact DAC, ADC, and timer resources needed by the STM32G4 family member selected for production.

📱

Compact Connected Control Boards

The STM32G473MEY6TR is useful in compact control boards that combine real-time sensing, local actuation, and an external communication controller. Its Cortex-M4 core handles system tasks and deterministic control loops while the 81-WLCSP footprint frees board area for power conversion or radio modules. The 512 KB of flash supports layered application and communication software, although SRAM requirements must be checked separately. Keep the MCU supply rail quiet, provide local high-frequency decoupling, and route high-current communication-module connections away from sensitive analog inputs.

What are the key specifications of STM32G473MEY6TR that engineers should know?
The STM32G473MEY6TR is a 32-bit Arm Cortex-M4 microcontroller rated for operation up to 170 MHz, with 512 KB of flash memory, an integrated math accelerator, and a high analog feature set. It is packaged in an 81-WLCSP measuring 4.02 mm by 4.27 mm and supports 1.8 V, 2.5 V, and 3.3 V supply configurations. According to the STMicroelectronics STM32G473ME product documentation, the STM32G473xB, xC, and xE devices use the high-performance Cortex-M4 core for mixed-signal and real-time control designs.
stm32g473mey6tr data sheet
The official STM32G473ME product page is the primary starting point for the STM32G473MEY6TR datasheet, device overview, and supporting documentation. The part is an STM32G4 microcontroller built around the 32-bit Arm Cortex-M4 core, with a maximum clock frequency of 170 MHz and 512 KB of embedded flash. Its ordering code specifies the compact 81-WLCSP package, so verify the pin assignment and land pattern against the package drawing before beginning a PCB layout.
Where can I find the STM32G473MEY6TR pinout and package drawing?
Use the STM32G473ME product page and the package information associated with the STM32G473MEY6TR ordering code to locate the pinout and land pattern. The device is offered in an 81-WLCSP measuring 4.02 mm by 4.27 mm. The manufacturer documentation is the controlling reference for pin multiplexing, supply pins, ground connections, analog inputs, and exposed thermal-pad requirements; do not infer those assignments from a generic STM32G4 schematic.
What is the STM32G473MEY6TR clock speed and core architecture?
The STM32G473MEY6TR uses a 32-bit RISC Arm Cortex-M4 core and supports a maximum operating frequency of 170 MHz. According to the STMicroelectronics STM32G473ME product page, the STM32G473xB, xC, and xE family is based on the high-performance Cortex-M4 core. This combination supports responsive interrupt handling, general-purpose embedded processing, and fixed-point digital signal processing tasks in a single mixed-signal microcontroller.
How much flash memory does the STM32G473MEY6TR have?
The STM32G473MEY6TR provides 512 KB of flash memory organized as 512K by 8 bits. The manufacturer product documentation identifies the STM32G473ME family as a Cortex-M4 based microcontroller series, while the DigiKey listing for this exact ordering code confirms the 512 KB flash configuration. Flash capacity is important for firmware size, bootloader space, calibration data, and parameter storage in embedded control products.
What can replace an STM32G473MEY6TR?
The closest drop-in replacements for the STM32G473MEY6TR are other STM32G4-family devices offered in the same 81-WLCSP footprint and with the same Cortex-M4 core architecture. Suitable candidates include the STM32G474MEY6TR, STM32G484MEY6TR, STM32G441MEY6TR, STM32G431MEY6TR, and STM32G491MEY6TR. Confirm flash capacity, analog-converter counts, timer features, pin multiplexing, and firmware requirements before treating any of them as a functional substitute.
Is the STM32G473MEY6TR the same as an STM32G484MEY6TR?
No, the STM32G473MEY6TR and STM32G484MEY6TR are related STM32G4 devices but are not identical. The STM32G473MEY6TR has 512 KB of flash, while the STM32G484 variant provides a larger memory configuration and a different mix of peripherals within the STM32G4 family. Both use the Cortex-M4 architecture and can share the 81-WLCSP land pattern, but board population still requires verification of pin multiplexing and device-specific firmware support.
When should I choose STM32G473MEY6TR over STM32G474MEY6TR?
Choose the STM32G473MEY6TR when 512 KB of flash and its particular analog and control peripheral mix satisfy the design. Choose the STM32G474MEY6TR when the application benefits from the additional resources and peripheral distinctions of that family member. Both are based on the STM32G4 platform and Cortex-M4 architecture, so the decision should follow the complete peripheral comparison rather than clock speed alone.
Is STM32G473MEY6TR suitable for motor control and digital power conversion?
Yes, the STM32G473MEY6TR is suitable for motor-control and digital power-conversion designs that benefit from its 170 MHz Cortex-M4 core, math accelerator, and high analog feature set. The math accelerator improves arithmetic throughput, while the analog-oriented peripheral set supports precision sensing and closed-loop control. Final loop performance still depends on converter resolution, sampling topology, compensation, and the application reference design.
Where to buy STM32G473MEY6TR online?
Use the Request a Quote form on this page to request STM32G473MEY6TR pricing, stock confirmation, and current lead time for the exact 81-WLCSP ordering code. Quote requests help prevent accidental substitution of a different temperature grade, package, or packing option. Confirm the full ordering code on the quotation and inspect the package dimensions before releasing a production order.
What is the price of STM32G473MEY6TR?
Current commercial pricing for the STM32G473MEY6TR is presented through the Request a Quote form on this page. Submit the exact MPN and required quantity to obtain a current response and availability confirmation. The 81-WLCSP package, operating-temperature grade, and reel or tray packing should remain identical throughout the quotation process to avoid receiving a different orderable variant.
What is the lead time and stock status for STM32G473MEY6TR?
Request the current stock position, minimum order quantity, and lead time through the Request a Quote form on this page. Lead time can vary with regional inventory and production scheduling, so confirm the result for the exact STM32G473MEY6TR ordering code rather than relying on historical catalog information. For new production designs, include a manufacturing window in the sourcing plan and verify whether any unforecast changes apply.
Is the STM32G473MEY6TR in stock?
Stock availability changes over time and should be confirmed through the Request a Quote form on this page. Include your required quantity and target delivery date in the request so the response reflects the current position for the 81-WLCSP ordering code. For prototype builds, also consider a small safety quantity to cover inspection or assembly yield requirements.
What is the best NXP or Microchip equivalent for STM32G473MEY6TR?
There is no verified cross-brand part in the available comparison data that can be identified as a pin-for-pin 81-WLCSP replacement for the STM32G473MEY6TR. The closest alternatives are other STM32G4 devices because they retain the same core family, package approach, and ecosystem. A different manufacturer's equivalent would require validation of the footprint, peripheral map, electrical limits, toolchain, and firmware porting effort before it could be called drop-in compatible.
Does the STM32G473MEY6TR require an external math accelerator?
No, the STM32G473MEY6TR includes an integrated math accelerator. This hardware block accelerates common arithmetic operations and reduces the execution load on the Cortex-M4 core compared with a software-only implementation. It is especially useful in filtering, control, and digital signal-processing code. Firmware should use the manufacturer's recommended instruction sequence and verify results against a floating-point reference during commissioning.

Data referensi engineering untuk STM32G473MEY6TR — pembandingan, panduan desain, dan informasi konformitas.

Panduan Pemilihan

Choose the STM32G473MEY6TR when a design needs a 170 MHz Cortex-M4 core, 512 KB of flash, math-accelerator support, and a high analog feature set in a compact 81-WLCSP. It is a strong fit for digital power conversion, motor control, precision sensing, and condition monitoring. Select the STM32G474MEY6TR when the G473 lacks a required peripheral or when its flash and resource requirements justify a neighboring G4 configuration. Consider the STM32G484MEY6TR when the larger memory configuration is useful, and the STM32G441MEY6TR or STM32G431MEY6TR when lower-cost, reduced-resource variants are sufficient. For every choice, verify the exact pin multiplexing, converter resources, timer capabilities, SRAM, and firmware support; a shared package alone does not guarantee functional interchangeability.

Pembandingan dengan Alternatif

Parameter Umum Produk Ini STM32G474MEY6TR STM32G484MEY6TR STM32G491MEY6TR STM32G441MEY6TR STM32G431MEY6TR
Package 81-WLCSP (4.02 mm x 4.27 mm) 81-WLCSP (4.02 mm x 4.27 mm) 81-WLCSP (4.02 mm x 4.27 mm) 81-WLCSP (4.02 mm x 4.27 mm) 81-WLCSP (4.02 mm x 4.27 mm) 81-WLCSP (4.02 mm x 4.27 mm)
Brand STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics STMicroelectronics
CPU Core Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4 Arm Cortex-M4
Maximum Clock Frequency 170 MHz 170 MHz 170 MHz 170 MHz 170 MHz 170 MHz
Math Accelerator Integrated Integrated Integrated Integrated Integrated Integrated
Programming and Debug Ecosystem STM32G4 Cortex-M4 ecosystem STM32G4 Cortex-M4 ecosystem STM32G4 Cortex-M4 ecosystem STM32G4 Cortex-M4 ecosystem STM32G4 Cortex-M4 ecosystem STM32G4 Cortex-M4 ecosystem
Analog Feature Level High analog High analog family High analog family High analog family High analog family High analog family
Device Identification STM32G473ME STM32G474ME STM32G484ME STM32G491ME STM32G441ME STM32G431ME

Diferensiator Kunci

  • Compact high-performance control in an 81-WLCSP (vsSTM32G431MEY6TR)
  • Integrated math acceleration for real-time control (vsSTM32G441MEY6TR)
  • Firmware continuity across the STM32G4 ecosystem (vsSTM32G484MEY6TR)

Catatan Desain

Decouple each supply connection close to the device and route the connections independently to the relevant ground pins. The STM32G473MEY6TR supports 1.8 V, 2.5 V, and 3.3 V configurations, but the usable set of analog and digital peripherals can vary with the selected voltage range. Confirm operating limits, internal-regulator requirements, and power-supply sequencing in the manufacturer datasheet before assigning the external supply rails. Add bulk capacitance at the board entry and local high-frequency capacitance at the WLCSP supply pins.

Preserve analog performance by separating sensitive analog inputs from digital clocks, high-current switching nodes, and inductor-current paths. Keep the MCU, analog reference network, and input-conditioning components on the same side of the board when possible, with continuous ground reference beneath the analog section. The 81-WLCSP footprint has a high pin density and short interconnect requirements, so use the manufacturer land pattern exactly and avoid improvised solder-jump or footprint changes during prototyping.

Route clock, debug, and high-speed communication signals over continuous reference planes, while keeping analog inputs short and free of test-point stubs where possible. The 170 MHz Cortex-M4 operating rate requires deterministic power and clock delivery, so check rise time, ringing, and crosstalk on critical nets with an oscilloscope. For ADC-based measurements, synchronize sampling with the timer strategy documented for the STM32G4 family and validate source impedance against the converter acquisition requirements.

Do not treat another STM32G4 ordering code as interchangeable merely because it uses a Cortex-M4 core and a similar package. Verify the exact package drawing, pin multiplexing, flash size, SRAM capacity, ADC channels, timer instances, math-accelerator support, and boot configuration before substituting a part. Because the 81-WLCSP is difficult to inspect after soldering, confirm the bill of materials and orientation marks before placement and run a continuity-oriented inspection on assembled prototypes.

Informasi Konformitas

RoHS
Unknown
REACH
Unknown
AEC-Q100
Not Applicable
Bebas Logam Lengket
Unknown
Bebas Halogena
Unknown
Mineral Konflik
Unknown

The manufacturer product page and distributor listings do not state the requested compliance fields for this exact ordering code. Confirm RoHS, REACH, halogen-free, and conflict-minerals documentation for the STM32G473MEY6TR before incorporating the statement into a regulated bill of materials.

Data disahkan pada: 2026-11-14 — data disahkan dan disusun oleh tim engineering komponen XAIPART

Pencarian Terkait

stm32g473mey6tr data sheet STM32G473MEY6TR datasheet STM32G473MEY6TR datasheet pdf STM32G473MEY6TR pinout STM32G473MEY6TR footprint STM32G473MEY6TR equivalent STM32G473MEY6TR replacement STM32G473MEY6TR cross reference STM32G473MEY6TR vs STM32G474MEY6TR STM32G473MEY6TR 170MHz Cortex-M4 STM32G473MEY6TR 512KB flash STM32G473MEY6TR 81-WLCSP STMicroelectronics STM32G473MEY6TR STM32G473MEY6TR price STM32G473MEY6TR motor control

Komponen dan Istilah Terkait

STMicroelectronics STM32G473MEY6TR STM32G473ME STM32G4 Arm Cortex-M4 32-bit RISC microcontroller microcontroller unit MCU semiconductor embedded processor real-time control digital signal processing math accelerator 512 KB flash memory 170 MHz 81-WLCSP WLCSP package surface-mount package analog-to-digital converter motor control digital power conversion condition monitoring industrial control
Kutipan Cepat RFQ
Isi detail lengkap — tim penjualan kami akan membalas dalam 24 jam
Nomor Part Manufaktur Paket QTY Harga Target Lengkap
✓
Kutipan telah disubmit!

Kami akan membalas email Anda dalam 24 jam

1
RFQ Dikirim
2
Kutipan Diterima
3
Order Ditempatkan
4
Pembayaran
5
Dikirim
6
Dikirim
Lihat Detil RFQ